| Age | Commit message (Collapse) | Author |
|---|
|
|
|
[auth.h kex.h kexdhs.c kexecdhs.c kexgexs.c monitor.c servconf.c]
[servconf.h session.c sshd.c sshd_config.5]
add ssh-agent(1) support to sshd(8); allows encrypted hostkeys,
or hostkeys on smartcards; most of the work by Zev Weiss; bz #1974
ok djm@
|
|
[auth-rsa.c auth.h auth2-hostbased.c auth2-pubkey.c monitor.c]
for hostbased authentication, print the client host and user on
the auth success/failure line; bz#2064, ok dtucker@
|
|
groupaccess.c loginrec.c monitor.c monitor_wrap.c session.c sshd.c
sshlogin.c uidswap.c openbsd-compat/bsd-cygwin_util.c
openbsd-compat/getrrsetbyname-ldns.c openbsd-compat/port-aix.c
openbsd-compat/port-linux.c] Replace portable-specific instances of xfree
with the equivalent calls to free.
|
|
[auth.h auth.c key.c monitor.c auth-rsa.c auth2.c auth1.c key.h]
Standardise logging of supplemental information during userauth. Keys
and ruser is now logged in the auth success/failure message alongside
the local username, remote host/port and protocol in use. Certificates
contents and CA are logged too.
Pushing all logging onto a single line simplifies log analysis as it is
no longer necessary to relate information scattered across multiple log
entries. "I like it" markus@
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
[sshd_config.5 servconf.c servconf.h packet.c serverloop.c monitor.c sshd_config
sshd.c] Add RekeyLimit to sshd with the same syntax as the client allowing
rekeying based on traffic volume or time. ok djm@, help & ok jmc@ for the man
page.
|
|
|
|
[auth.h auth2-chall.c auth2.c monitor.c sshd_config.5]
add submethod support to AuthenticationMethods; ok and freedback djm@
|
|
[auth2-pubkey.c monitor.c]
reconstruct the original username that was sent by the client, which may
have included a style (e.g. "root:skey") when checking public key
signatures. Fixes public key and hostbased auth when the client specified
a style; ok markus@
|
|
platforms, such as Android, that lack struct passwd.pw_gecos. Report
and initial patch from Nathan Osman bz#2086; feedback tim@ ok dtucker@
|
|
[monitor.c]
drain the log messages after receiving the keystate from the unpriv
child. otherwise it might block while sending. ok djm@
|
|
[auth.c auth.h auth1.c auth2-chall.c auth2-gss.c auth2-jpake.c auth2.c]
[monitor.c monitor.h]
Fixes logging of partial authentication when privsep is enabled
Previously, we recorded "Failed xxx" since we reset authenticated before
calling auth_log() in auth2.c. This adds an explcit "Partial" state.
Add a "submethod" to auth_log() to report which submethod is used
for keyboard-interactive.
Fix multiple authentication when one of the methods is
keyboard-interactive.
ok markus@
|
|
[auth.h auth1.c auth2.c monitor.c servconf.c servconf.h sshd.c]
[sshd_config.5]
Support multiple required authentication via an AuthenticationMethods
option. This option lists one or more comma-separated lists of
authentication method names. Successful completion of all the methods in
any list is required for authentication to complete;
feedback and ok markus@
|
|
|
|
[monitor.c sshconnect2.c]
remove dead code following 'for (;;)' loops.
From Steve.McClellan at radisys com, ok markus@
|
|
|
|
[monitor.c]
memleak on error path
|
|
|
|
[monitor.c]
ignore EINTR errors from poll()
|
|
[log.c log.h monitor.c monitor.h monitor_wrap.c monitor_wrap.h sshd.c]
make the pre-auth privsep slave log via a socketpair shared with the
monitor rather than /var/empty/dev/log; ok dtucker@ deraadt@ markus@
|
|
places and the survey data we have does not show any systems that use it.
"nuke it" djm@
|
|
- djm@cvs.openbsd.org 2011/05/23 03:30:07
[auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
allow AuthorizedKeysFile to specify multiple files, separated by spaces.
Bring back authorized_keys2 as a default search path (to avoid breaking
existing users of this file), but override this in sshd_config so it will
be no longer used on fresh installs. Maybe in 2015 we can remove it
entierly :)
feedback and ok markus@ dtucker@
|
|
[monitor.c monitor_wrap.c servconf.c servconf.h]
use a macro to define which string options to copy between configs
for Match. This avoids problems caused by forgetting to keep three
code locations in perfect sync and ordering
"this is at once beautiful and horrible" + ok dtucker@
|
|
- djm@cvs.openbsd.org 2011/05/15 08:09:01
[authfd.c monitor.c serverloop.c]
use FD_CLOEXEC consistently; patch from zion AT x96.org
|
|
|
|
[kex.c kex.h kexecdh.c key.c key.h monitor.c ssh-ecdsa.c]
ECDH/ECDSA compliance fix: these methods vary the hash function they use
(SHA256/384/512) depending on the length of the curve in use. The previous
code incorrectly used SHA256 in all cases.
This fix will cause authentication failure when using 384 or 521-bit curve
keys if one peer hasn't been upgraded and the other has. (256-bit curve
keys work ok). In particular you may need to specify HostkeyAlgorithms
when connecting to a server that has not been upgraded from an upgraded
client.
ok naddy@
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
|
|
PAM to sane values in case the PAM method doesn't write to them. Spotted by
Bitman Zhou, ok djm@.
|
|
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c packet.c]
[ssh-rsa.c]
s/timing_safe_cmp/timingsafe_bcmp/g
|
|
[auth-rsa.c channels.c jpake.c key.c misc.c misc.h monitor.c]
[packet.c ssh-rsa.c]
implement a timing_safe_cmp() function to compare memory without leaking
timing information by short-circuiting like memcmp() and use it for
some of the more sensitive comparisons (though nothing high-value was
readily attackable anyway); "looks ok" markus@
|
|
|
|
[auth-rhosts.c monitor.c monitor_wrap.c session.c auth-options.c sshd.c]
Hold authentication debug messages until after successful authentication.
Fixes an info leak of environment variables specified in authorized_keys,
reported by Jacob Appelbaum. ok djm@
|
|
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
[monitor.c packet.c]
Fix warnings found by chl@ and djm@ and change roaming_atomicio's
return type to match atomicio's
Diff from djm@, ok markus@
|
|
[sshd.c packet.c serverloop.c monitor_wrap.c clientloop.c sshconnect.c
monitor.c Added roaming.h roaming_common.c roaming_dummy.c]
Keep track of number of bytes read and written. Needed for upcoming
changes. Most code from Martin Forssen, maf at appgate dot com.
ok markus@
Also, applied appropriate changes to Makefile.in
|
|
[canohost.h canohost.c]
Add clear_cached_addr(), needed for upcoming changes allowing the peer
address to change.
ok markus@
|
|
[monitor.c]
some paranoia: check that the serialised key is really KEY_RSA before
diddling its internals
|
|
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h]
[readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5]
[sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c]
[Makefile.in]
Add support for an experimental zero-knowledge password authentication
method using the J-PAKE protocol described in F. Hao, P. Ryan,
"Password Authenticated Key Exchange by Juggling", 16th Workshop on
Security Protocols, Cambridge, April 2008.
This method allows password-based authentication without exposing
the password to the server. Instead, the client and server exchange
cryptographic proofs to demonstrate of knowledge of the password while
revealing nothing useful to an attacker or compromised endpoint.
This is experimental, work-in-progress code and is presently
compiled-time disabled (turn on -DJPAKE in Makefile.inc).
"just commit it. It isn't too intrusive." deraadt@
|
|
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h sshd.c]
sync v1 and v2 traffic accounting; add it to sshd, too;
ok djm@, dtucker@
|
|
[monitor.c]
Make debug a little clearer. ok djm@
|
