Age | Commit message (Collapse) | Author |
|
[Makefile.in auth1.c auth2.c auth.c auth.h auth-krb5.c canohost.c
cleanup.c clientloop.c fatal.c gss-serv.c log.c log.h monitor.c monitor.h
monitor_wrap.c monitor_wrap.h packet.c serverloop.c session.c session.h
ssh-agent.c sshd.c]
replace fatal_cleanup() and linked list of fatal callbacks with static
cleanup_exit() function. re-refine cleanup_exit() where appropriate,
allocate sshd's authctxt eary to allow simpler cleanup in sshd.
tested by many, ok deraadt@
|
|
[auth-passwd.c auth.c auth.h auth1.c auth2-none.c auth2-passwd.c]
[auth2.c monitor.c]
fix passwd auth for 'username leaks via timing'; with djm@, original
patches from solar
|
|
[auth-krb5.c auth.h auth1.c monitor.c monitor.h monitor_wrap.c]
[monitor_wrap.h readconf.c servconf.c session.c ssh_config.5]
[sshconnect1.c sshd.c sshd_config sshd_config.5]
remove kerberos support from ssh1, since it has been replaced with GSSAPI;
but keep kerberos passwd auth for ssh1 and 2; ok djm, hin, henning, ...
|
|
[monitor.c monitor_wrap.c sshconnect2.c]
64 bit cleanups; markus ok
|
|
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
|
|
UsePAM=yes; ok dtucker
|
|
- markus@cvs.openbsd.org 2003/07/22 13:35:22
[auth1.c auth.h auth-passwd.c monitor.c monitor.h monitor_wrap.c
monitor_wrap.h readconf.c readconf.h servconf.c servconf.h session.c ssh.1
ssh.c ssh_config.5 sshconnect1.c sshd.c sshd_config.5 ssh.h]
remove (already disabled) KRB4/AFS support, re-enable -k in ssh(1);
test+ok henning@
- (dtucker) [Makefile.in acconfig.h configure.ac] Remove KRB4/AFS support.
- (dtucker) [auth-krb4.c radix.c radix.h] Remove KRB4/AFS specific files.
I hope I got this right....
|
|
[auth2-hostbased.c auth2-pubkey.c auth2.c channels.c key.c key.h
monitor.c packet.c packet.h serverloop.c sshconnect2.c sshd.c]
int -> u_int; ok djm@, deraadt@, mouring@
|
|
- markus@cvs.openbsd.org 2003/06/12 07:57:38
[monitor.c sshlogin.c sshpty.c]
typos; dtucker at zip.com.au
|
|
- markus@cvs.openbsd.org 2003/06/02 09:17:34
[auth2-hostbased.c auth.c auth-options.c auth-rhosts.c auth-rh-rsa.c]
[canohost.c monitor.c servconf.c servconf.h session.c sshd_config]
[sshd_config.5]
deprecate VerifyReverseMapping since it's dangerous if combined
with IP based access control as noted by Mike Harding; replace with
a UseDNS option, UseDNS is on by default and includes the
VerifyReverseMapping check; with itojun@, provos@, jakob@ and deraadt@
ok deraadt@, djm@
- (djm) Fix portable-specific uses of verify_reverse_mapping too
|
|
[authfile.c monitor.c sftp-common.c sshpty.c]
cast some types for printing; ok markus@
|
|
[monitor.c]
http://bugzilla.mindrot.org/show_bug.cgi?id=560
Privsep child continues to run after monitor killed.
Pass monitor signals through to child; Darren Tucker
|
|
over usage of PAM. This allows non-root use of sshd when built with
--with-pam
|
|
[auth2.c monitor.c sshconnect2.c auth2-krb5.c]
implement kerberos over ssh2 ("kerberos-2@ssh.com"); tested with jakob@
server interops with commercial client; ok jakob@ djm@
|
|
|
|
proper challenge-response module
|
|
Makefile many moons ago
- (djm) Apply "owl-always-auth" patch from Openwall/Solar Designer
- (djm) Fix blibpath specification for AIX/gcc
- (djm) Some systems have basename in -lgen. Fix from ayamura@ayamura.org
|
|
|
|
- markus@cvs.openbsd.org 2003/04/02 09:48:07
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
reapply rekeying chage, tested by henning@, ok djm@
|
|
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
rekeying bugfixes and automatic rekeying:
* both client and server rekey _automatically_
(a) after 2^31 packets, because after 2^32 packets
the sequence number for packets wraps
(b) after 2^(blocksize_in_bits/4) blocks
(see: draft-ietf-secsh-newmodes-00.txt)
(a) and (b) are _enabled_ by default, and only disabled for known
openssh versions, that don't support rekeying properly.
* client option 'RekeyLimit'
* do not reply to requests during rekeying
- markus@cvs.openbsd.org 2003/04/01 10:22:21
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
backout rekeying changes (for 3.6.1)
|
|
- markus@cvs.openbsd.org 2003/03/23 19:02:00
[monitor.c]
unbreak rekeying for privsep; ok millert@
|
|
- markus@cvs.openbsd.org 2003/03/05 22:33:43
[channels.c monitor.c scp.c session.c sftp-client.c sftp-int.c]
[sftp-server.c ssh-add.c sshconnect2.c]
fix memory leaks; from dlheine@suif.Stanford.EDU/CLOUSEAU; ok djm@
|
|
[monitor.c monitor_wrap.c]
fix permitrootlogin forced-commands-only for privsep; bux #387; ok provos@
|
|
[monitor.c monitor_wrap.c]
skey/bsdauth: use 0 to indicate failure instead of -1, because
the buffer API only supports unsigned ints.
|
|
[monitor.c]
handle overflows for size_t larger than u_int; siw@goneko.de, bug #425
|
|
[auth1.c auth.h auth-krb4.c monitor.c monitor.h monitor_wrap.c]
[monitor_wrap.h]
krb4 + privsep; ok dugsong@, deraadt@
|
|
[monitor.c]
only call kerberos code for authctxt->valid
|
|
[monitor.c]
only call auth_krb5 if kerberos is enabled; ok deraadt@
|
|
[channels.c kex.h key.c monitor.c monitor_wrap.c radix.c uuencode.c]
signed vs unsigned from -pedantic; ok henning@
|
|
[auth1.c auth.h auth-krb5.c monitor.c monitor.h]
[monitor_wrap.c monitor_wrap.h]
kerberos support for privsep. confirmed to work by lha@stacken.kth.se
patch from markus
|
|
[monitor.c session.c sshlogin.c sshlogin.h]
pass addrlen with sockaddr *; from Hajimu UMEMOTO <ume@FreeBSD.org>
NOTE: there are also p-specific parts to this patch. ok markus@
|
|
[monitor.c monitor_mm.c]
Change mm_zalloc() sanity checks to be more in line with what
we do in calloc() and add a check to monitor_mm.c.
OK provos@ and markus@
|
|
[monitor.c]
u_int here; ok provos@
|
|
[auth2-none.c monitor.c sftp-client.c]
use xfree()
|
|
[monitor.c]
improve mm_zalloc check; markus ok
|
|
[monitor.c]
correct %u
|
|
[monitor.c]
be careful in mm_zalloc
|
|
|
|
[monitor.c]
save auth method before monitor_reset_key_state(); bugzilla bug #284;
ok provos@
|
|
[monitor.c]
Don't initialise compression buffers when compression=no in sshd_config;
ok Niels@
|
|
[cipher.c monitor.c monitor_wrap.c packet.c packet.h]
make the monitor sync the transfer ssh1 session key;
transfer keycontext only for RC4 (this is still depends on EVP
implementation details and is broken).
|
|
[cipher.c monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c]
__FUNCTION__ -> __func__
NOTE: This includes all portable references also.
|
|
[monitor.c]
save the session id (hash) for ssh2 (it will be passed with the
initial sign request) and verify that this value is used during
authentication; ok provos@
|
|
[monitor.c]
only allow enabled authentication methods; ok provos@
|
|
[kex.c monitor.c monitor_wrap.c sshd.c]
'monitor' variable clashes with at least one lame platform (NeXT). i
Renamed to 'pmonitor'. provos@
- (bal) Fixed up PAM case. I think.
|
|
|
|
<pekkas@netcore.fi>
|
|
|
|
|
|
[monitor.c serverloop.c sftp-int.c sftp.c sshd.c]
check waitpid for EINTR; based on patch from peter@ifm.liu.se
|