summaryrefslogtreecommitdiff
path: root/monitor_fdpass.c
AgeCommit message (Collapse)Author
2010-01-15Drop change from 1:3.6.1p2-5 to disable cmsg_type check for fileColin Watson
descriptor passing when running on Linux 2.0. The previous stable release of Debian dropped support for Linux 2.4, let alone 2.0, so this very likely has no remaining users depending on it.
2010-01-01* New upstream release (closes: #536182). Yes, I know 5.3p1 has been outColin Watson
for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958).
2008-12-01 - dtucker@cvs.openbsd.org 2008/11/30 11:59:26Darren Tucker
[monitor_fdpass.c] Retry sendmsg/recvmsg on EAGAIN and EINTR; ok djm@
2008-11-23 - (dtucker) [monitor_fdpass.c] Reduce diff vs OpenBSD by moving someDarren Tucker
declarations, removing an unnecessary union member and adding whitespace. ok djm some time ago.
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-03-27 - deraadt@cvs.openbsd.org 2008/03/24 16:11:07Damien Miller
[monitor_fdpass.c] msg_controllen has to be CMSG_SPACE so that the kernel can account for each cmsg_len (ie. msg_controllen = sum of CMSG_ALIGN(cmsg_len). This works now that kernel fd passing has been fixed to accept a bit of sloppiness because of this ABI repair. lots of discussion with kettenis
2008-03-27 - deraadt@cvs.openbsd.org 2008/03/15 16:19:02Damien Miller
[monitor_fdpass.c] Repair the simple cases for msg_controllen where it should just be CMSG_SIZE(sizeof(int)), not sizeof(buffer) which may be larger because of alignment; ok kettenis hshoexer
2008-03-27 - deraadt@cvs.openbsd.org 2008/03/13 01:49:53Damien Miller
[monitor_fdpass.c] Correct CMSG_SPACE and CMSG_LEN usage everywhere in the tree. Due to an extensive discussion with otto, kettenis, millert, and hshoexer
2008-03-07 - deraadt@cvs.openbsd.org 2008/03/02 18:19:35Damien Miller
[monitor_fdpass.c] use a union to ensure alignment of the cmsg (pay attention: various other parts of the tree need this treatment too); ok djm
2007-09-17 - djm@cvs.openbsd.org 2007/09/04 03:21:03Damien Miller
[clientloop.c monitor.c monitor_fdpass.c monitor_fdpass.h] [monitor_wrap.c ssh.c] make file descriptor passing code return an error rather than call fatal() when it encounters problems, and use this to make session multiplexing masters survive slaves failing to pass all stdio FDs; ok markus@
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2006-10-16 - (dtucker) [monitor_fdpass.c] Include sys/in.h, required for cmsg macrosDarren Tucker
on older (2.0) Linuxes. Based on patch from thmo-13 at gmx de.
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/22 20:48:23Damien Miller
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c] [auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c] [authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c] [cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c] [compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c] [includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c] [progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c] move #include <string.h> out of includes.h
2006-07-12 - stevesk@cvs.openbsd.org 2006/07/11 20:07:25Darren Tucker
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c] move #include <errno.h> out of includes.h; ok markus@
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/08 21:47:12Damien Miller
[authfd.c canohost.c clientloop.c dns.c dns.h includes.h] [monitor_fdpass.c nchan.c packet.c servconf.c sftp.c ssh-agent.c] [ssh-keyscan.c ssh.c sshconnect.h sshd.c sshlogin.h] move #include <sys/socket.h> out of includes.h
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 13:17:03Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c] [auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c] [auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c] [auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c] [buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c] [cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c] [deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c] [kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c] [readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c] [sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c] Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that Theo nuked - our scripts to sync -portable need them in the files
2006-03-26 - deraadt@cvs.openbsd.org 2006/03/19 18:51:18Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c] [auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c] [auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c] [auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c] [canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c] [groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c] [kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c] [loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c] [nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c] [scard.c scp.c servconf.c serverloop.c session.c sftp-client.c] [sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c] [ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c] [ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c] [openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c] [openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c] [openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c] [openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c] RCSID() can die
2005-01-04Merge 3.9p1 to the trunk.Colin Watson
2004-08-13 - djm@cvs.openbsd.org 2004/08/13 02:51:48Darren Tucker
[monitor_fdpass.c] extra check for no message case; ok markus, deraadt, hshoexer, henning
2004-06-22 - avsm@cvs.openbsd.org 2004/06/21 17:36:31Darren Tucker
[auth-rsa.c auth2-gss.c auth2-pubkey.c authfile.c canohost.c channels.c cipher.c dns.c kex.c monitor.c monitor_fdpass.c monitor_wrap.c monitor_wrap.h nchan.c packet.c progressmeter.c scp.c sftp-server.c sftp.c ssh-gss.h ssh-keygen.c ssh.c sshconnect.c sshconnect1.c sshlogin.c sshpty.c] make ssh -Wshadow clean, no functional changes markus@ ok There are also some portable-specific -Wshadow warnings to be fixed in monitor.c and montior_wrap.c.
2003-09-01Debian release 3.6.1p2-5.Colin Watson
2003-05-02 - (dtucker) Bug #544: ignore invalid cmsg_type on Linux 2.0 kernels,Darren Tucker
privsep should now work.
2002-06-27 - deraadt@cvs.openbsd.org 2002/06/26 14:50:04Ben Lindstrom
[monitor_fdpass.c] use ssize_t for recvmsg() and sendmsg() return
2002-06-06 - markus@cvs.openbsd.org 2002/06/04 23:05:49Ben Lindstrom
[cipher.c monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c] __FUNCTION__ -> __func__ NOTE: This includes all portable references also.
2002-05-27[configure.ac.orig monitor_fdpass.c] Enahnce msghdr tests to addressTim Rice
build problem on Irix reported by Dave Love <d.love@dl.ac.uk>. Back out last monitor_fdpass.c changes that are no longer needed with new tests. Patch tested on Irix by Jan-Frode Myklebust <janfrode@parallab.uib.no>
2002-05-11 fix for systems that have both HAVE_ACCRIGHTS_IN_MSGHDR andTim Rice
HAVE_CONTROL_IN_MSGHDR. Ie. sys/socket.h has #define msg_accrights msg_control
2002-04-15[configure.ac] add tests for recvmsg and sendmsg.Tim Rice
[monitor_fdpass.c] add checks for HAVE_SENDMSG and HAVE_RECVMSG for systems that HAVE_ACCRIGHTS_IN_MSGHDR but no recvmsg or sendmsg.
2002-04-07 - (stevesk) [monitor_fdpass.c] fatal() for UsePrivilegeSeparation=yesKevin Steves
and no fd passing support.
2002-03-26 - stevesk@cvs.openbsd.org 2002/03/24 17:53:16Ben Lindstrom
[monitor_fdpass.c] minor cleanup and more error checking; ok markus@
2002-03-22 - (stevesk) [monitor_fdpass.c] support for access rights style fileKevin Steves
descriptor passing
2002-03-22 - provos@cvs.openbsd.org 2002/03/18 17:50:31Ben Lindstrom
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c session.h servconf.h serverloop.c session.c sshd.c] integrate privilege separated openssh; its turned off by default for now. work done by me and markus@ applied, but outside of ensure that smaller code bits migrated with their owners.. no work was tried to 'fix' it to work. =) Later project!
2002-03-13revert more of my stupidityDamien Miller
2002-03-13Import of Niels Provos' 20020312 ssh-complete.diffDamien Miller
PAM, Cygwin and OSF SIA will not work for sure