| Age | Commit message (Collapse) | Author |
|---|
|
OpenBSD-Commit-ID: f3cb4e54bff15c593602d95cc43e32ee1a4bac42
|
|
It turns out we still support pre-auth compression on the client.
Therefore revert the previous two commits:
date: 2018/07/06 09:06:14; author: sf; commitid: yZVYKIRtUZWD9CmE;
Rename COMP_DELAYED to COMP_ZLIB
Only delayed compression is supported nowadays.
ok markus@
date: 2018/07/06 09:05:01; author: sf; commitid: rEGuT5UgI9f6kddP;
Remove leftovers from pre-authentication compression
Support for this has been removed in 2016.
COMP_DELAYED will be renamed in a later commit.
ok markus@
OpenBSD-Commit-ID: cdfef526357e4e1483c86cf599491b2dafb77772
|
|
Support for this has been removed in 2016.
COMP_DELAYED will be renamed in a later commit.
ok markus@
OpenBSD-Commit-ID: 6a99616c832627157113fcb0cf5a752daf2e6b58
|
|
Spotted using https://github.com/lucasdemarchi/codespell
|
|
remove the legacy one.
Includes a fairly big refactor of auth2-pubkey.c to retain less state
between key file lines.
feedback and ok markus@
OpenBSD-Commit-ID: dece6cae0f47751b9892080eb13d6625599573df
|
|
uuencode.h is not used
OpenBSD-Commit-ID: 238eb4659f3c119904326b9e94a5e507a912796c
|
|
revert stricter key type / signature type checking in
userauth path; too much software generates inconsistent messages, so we need
a better plan.
OpenBSD-Commit-ID: 4a44ddc991c803c4ecc8f1ad40e0ab4d22e1c519
|
|
pass negotiated signing algorithm though to
sshkey_verify() and check that the negotiated algorithm matches the type in
the signature (only matters for RSA SHA1/SHA2 sigs). ok markus@
OpenBSD-Commit-ID: 735fb15bf4adc060d3bee9d047a4bcaaa81b1af9
|
|
replace statically-sized arrays in ServerOptions with
dynamic ones managed by xrecallocarray, removing some arbitrary (though
large) limits and saving a bit of memory; "much nicer" markus@
Upstream-ID: 1732720b2f478fe929d6687ac7b0a97ff2efe9d2
|
|
Fix PermitOpen crash; spotted by benno@, ok dtucker@ deraadt@
Upstream-ID: c2cc84ffac070d2e1ff76182c70ca230a387983c
|
|
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
|
|
switch auth2-pubkey.c to modern APIs; with & ok djm@
Upstream-ID: 8f08d4316eb1b0c4ffe4a206c05cdd45ed1daf07
|
|
switch from Key typedef with struct sshkey; ok djm@
Upstream-ID: 3067d33e04efbe5131ce8f70668c47a58e5b7a1f
|
|
allow LogLevel in sshd_config Match blocks; ok dtucker
bz#2717
Upstream-ID: 662e303be63148f47db1aa78ab81c5c2e732baa8
|
|
remove ssh1 server code; ok djm@
Upstream-ID: c24c0c32c49b91740d5a94ae914fb1898ea5f534
|
|
bz#2249: handle the case where PAM returns PAM_MAXTRIES by ceasing to offer
password and keyboard-interative authentication methods. Should prevent
"sshd ignoring max retries" warnings in the log. ok djm@
It probably won't trigger with keyboard-interactive in the default
configuration because the retry counter is stored in module-private
storage which goes away with the sshd PAM process (see bz#688). On the
other hand, those cases probably won't log a warning either.
|
|
refactor canohost.c: move functions that cache results closer
to the places that use them (authn and session code). After this, no state is
cached in canohost.c
feedback and ok markus@
Upstream-ID: 5f2e4df88d4803fc8ec59ec53629105e23ce625e
|
|
remove roaming support; ok djm@
Upstream-ID: 2cab8f4b197bc95776fb1c8dc2859dad0c64dc56
|
|
implement SHA2-{256,512} for RSASSA-PKCS1-v1_5 signatures
(user and host auth) based on draft-rsa-dsa-sha2-256-03.txt and
draft-ssh-ext-info-04.txt; with & ok djm@
Upstream-ID: cf82ce532b2733e5c4b34bb7b7c94835632db309
|
|
Pointed out by Moritz Jodeit; ok dtucker@
|
|
prevent authorized_keys options picked up on public key
tests without a corresponding private key authentication being applied to
other authentication methods. Reported by halex@, ok markus@
|
|
pointed out by Christian Hesse
|
|
Revise hostkeys@openssh.com hostkey learning extension.
The client will not ask the server to prove ownership of the private
halves of any hitherto-unseen hostkeys it offers to the client.
Allow UpdateHostKeys option to take an 'ask' argument to let the
user manually review keys offered.
ok markus@
|
|
adapt kex to sshbuf and struct ssh; ok djm@
|
|
update packet.c & isolate, introduce struct ssh a) switch
packet.c to buffer api and isolate per-connection info into struct ssh b)
(de)serialization of the state is moved from monitor to packet.c c) the old
packet.c API is implemented in opacket.[ch] d) compress.c/h is removed and
integrated into packet.c with and ok djm@
|
|
Disables and removes dependency on OpenSSL. Many features don't
work and the set of crypto options is greatly restricted. This
will only work on system with native arc4random or /dev/urandom.
Considered highly experimental for now.
|
|
adapt mac.c to ssherr.h return codes (de-fatal) and
simplify dependencies ok djm@
|
|
[auth.c authfd.c authfile.c bufaux.c cipher.c cipher.h hostfile.c]
[kex.c key.c mac.c monitor.c monitor_wrap.c myproposal.h packet.c]
[roaming_client.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-pkcs11.h ssh.c sshconnect.c sshconnect2.c sshd.c]
make compiling against OpenSSL optional (make OPENSSL=no);
reduces algorithms to curve25519, aes-ctr, chacha, ed25519;
allows us to explore further options; with and ok djm
|
|
[auth1.c auth2-chall.c auth2-passwd.c authfile.c bufaux.c bufbn.c]
[buffer.c cipher-3des1.c cipher.c clientloop.c gss-serv.c kex.c]
[kexdhc.c kexdhs.c kexecdhc.c kexgexc.c kexecdhs.c kexgexs.c key.c]
[monitor.c monitor_wrap.c packet.c readpass.c rsa.c serverloop.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-ecdsa.c ssh-ed25519.c]
[ssh-keygen.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c]
convert memset of potentially-private data to explicit_bzero()
|
|
[Makefile.in auth.h auth2-jpake.c auth2.c jpake.c jpake.h monitor.c]
[monitor.h monitor_wrap.c monitor_wrap.h readconf.c readconf.h]
[schnorr.c schnorr.h servconf.c servconf.h ssh2.h sshconnect2.c]
remove experimental, never-enabled JPAKE code; ok markus@
|
|
[monitor_wrap.c]
fix rekeying for AES-GCM modes; ok deraadt
|
|
groupaccess.c loginrec.c monitor.c monitor_wrap.c session.c sshd.c
sshlogin.c uidswap.c openbsd-compat/bsd-cygwin_util.c
openbsd-compat/getrrsetbyname-ldns.c openbsd-compat/port-aix.c
openbsd-compat/port-linux.c] Replace portable-specific instances of xfree
with the equivalent calls to free.
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
platforms, such as Android, that lack struct passwd.pw_gecos. Report
and initial patch from Nathan Osman bz#2086; feedback tim@ ok dtucker@
|
|
[PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c]
[myproposal.h packet.c ssh_config.5 sshd_config.5]
support AES-GCM as defined in RFC 5647 (but with simpler KEX handling)
ok and feedback djm@
|
|
[monitor_wrap.c]
pasto; ok djm@
|
|
[log.c log.h monitor.c monitor.h monitor_wrap.c monitor_wrap.h sshd.c]
make the pre-auth privsep slave log via a socketpair shared with the
monitor rather than /var/empty/dev/log; ok dtucker@ deraadt@ markus@
|
|
- djm@cvs.openbsd.org 2011/05/23 03:30:07
[auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
allow AuthorizedKeysFile to specify multiple files, separated by spaces.
Bring back authorized_keys2 as a default search path (to avoid breaking
existing users of this file), but override this in sshd_config so it will
be no longer used on fresh installs. Maybe in 2015 we can remove it
entierly :)
feedback and ok markus@ dtucker@
|
|
[monitor.c monitor_wrap.c servconf.c servconf.h]
use a macro to define which string options to copy between configs
for Match. This avoids problems caused by forgetting to keep three
code locations in perfect sync and ordering
"this is at once beautiful and horrible" + ok dtucker@
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
[auth-rhosts.c monitor.c monitor_wrap.c session.c auth-options.c sshd.c]
Hold authentication debug messages until after successful authentication.
Fixes an info leak of environment variables specified in authorized_keys,
reported by Jacob Appelbaum. ok djm@
|
|
[monitor_wrap.c monitor_mm.c ssh-keygen.c auth2.c gss-genr.c sftp-client.c]
alphabetize includes; reduces diff vs portable and style(9).
ok stevesk djm
(Id sync only; these were already in order in -portable)
|
|
[sshd.c packet.c serverloop.c monitor_wrap.c clientloop.c sshconnect.c
monitor.c Added roaming.h roaming_common.c roaming_dummy.c]
Keep track of number of bytes read and written. Needed for upcoming
changes. Most code from Martin Forssen, maf at appgate dot com.
ok markus@
Also, applied appropriate changes to Makefile.in
|
|
[canohost.h canohost.c]
Add clear_cached_addr(), needed for upcoming changes allowing the peer
address to change.
ok markus@
|
|
[auth2-jpake.c jpake.c jpake.h monitor_wrap.c monitor_wrap.h schnorr.c]
[sshconnect2.c]
refactor the (disabled) Schnorr proof code to make it a little more
generally useful
|
|
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h]
[readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5]
[sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c]
[Makefile.in]
Add support for an experimental zero-knowledge password authentication
method using the J-PAKE protocol described in F. Hao, P. Ryan,
"Password Authenticated Key Exchange by Juggling", 16th Workshop on
Security Protocols, Cambridge, April 2008.
This method allows password-based authentication without exposing
the password to the server. Instead, the client and server exchange
cryptographic proofs to demonstrate of knowledge of the password while
revealing nothing useful to an attacker or compromised endpoint.
This is experimental, work-in-progress code and is presently
compiled-time disabled (turn on -DJPAKE in Makefile.inc).
"just commit it. It isn't too intrusive." deraadt@
|
|
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h sshd.c]
sync v1 and v2 traffic accounting; add it to sshd, too;
ok djm@, dtucker@
|
|
[monitor.c monitor_wrap.c session.h servconf.c servconf.h session.c]
[sshd_config sshd_config.5]
Make the maximum number of sessions run-time controllable via
a sshd_config MaxSessions knob. This is useful for disabling
login/shell/subsystem access while leaving port-forwarding working
(MaxSessions 0), disabling connection multiplexing (MaxSessions 1) or
simply increasing the number of allows multiplexed sessions.
Because some bozos are sure to configure MaxSessions in excess of the
number of available file descriptors in sshd (which, at peak, might be
as many as 9*MaxSessions), audit sshd to ensure that it doesn't leak fds
on error paths, and make it fail gracefully on out-of-fd conditions -
sending channel errors instead of than exiting with fatal().
bz#1090; MaxSessions config bits and manpage from junyer AT gmail.com
ok markus@
|
|
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
|
|
[monitor_wrap.c monitor.c]
Send config block back to slave for invalid users too so options
set by a Match block (eg Banner) behave the same for non-existent
users. Found by and ok djm@
|
