| Age | Commit message (Collapse) | Author |
|---|
|
[Makefile.in auth1.c auth2.c auth.c auth.h auth-krb5.c canohost.c
cleanup.c clientloop.c fatal.c gss-serv.c log.c log.h monitor.c monitor.h
monitor_wrap.c monitor_wrap.h packet.c serverloop.c session.c session.h
ssh-agent.c sshd.c]
replace fatal_cleanup() and linked list of fatal callbacks with static
cleanup_exit() function. re-refine cleanup_exit() where appropriate,
allocate sshd's authctxt eary to allow simpler cleanup in sshd.
tested by many, ok deraadt@
|
|
[auth-krb5.c auth.h auth1.c monitor.c monitor.h monitor_wrap.c]
[monitor_wrap.h readconf.c servconf.c session.c ssh_config.5]
[sshconnect1.c sshd.c sshd_config sshd_config.5]
remove kerberos support from ssh1, since it has been replaced with GSSAPI;
but keep kerberos passwd auth for ssh1 and 2; ok djm, hin, henning, ...
|
|
[monitor.c monitor_wrap.c sshconnect2.c]
64 bit cleanups; markus ok
|
|
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
|
|
UsePAM=yes; ok dtucker
|
|
- markus@cvs.openbsd.org 2003/07/22 13:35:22
[auth1.c auth.h auth-passwd.c monitor.c monitor.h monitor_wrap.c
monitor_wrap.h readconf.c readconf.h servconf.c servconf.h session.c ssh.1
ssh.c ssh_config.5 sshconnect1.c sshd.c sshd_config.5 ssh.h]
remove (already disabled) KRB4/AFS support, re-enable -k in ssh(1);
test+ok henning@
- (dtucker) [Makefile.in acconfig.h configure.ac] Remove KRB4/AFS support.
- (dtucker) [auth-krb4.c radix.c radix.h] Remove KRB4/AFS specific files.
I hope I got this right....
|
|
[atomicio.c atomicio.h authfd.c clientloop.c monitor_wrap.c msg.c
progressmeter.c scp.c sftp-client.c ssh-keyscan.c ssh.h sshconnect.c
sshd.c]
deal with typing of write vs read in atomicio
|
|
over usage of PAM. This allows non-root use of sshd when built with
--with-pam
|
|
proper challenge-response module
|
|
[monitor_wrap.c]
typo: get correct counters; introduced during rekeying change.
|
|
- markus@cvs.openbsd.org 2003/04/02 09:48:07
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
reapply rekeying chage, tested by henning@, ok djm@
|
|
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
rekeying bugfixes and automatic rekeying:
* both client and server rekey _automatically_
(a) after 2^31 packets, because after 2^32 packets
the sequence number for packets wraps
(b) after 2^(blocksize_in_bits/4) blocks
(see: draft-ietf-secsh-newmodes-00.txt)
(a) and (b) are _enabled_ by default, and only disabled for known
openssh versions, that don't support rekeying properly.
* client option 'RekeyLimit'
* do not reply to requests during rekeying
- markus@cvs.openbsd.org 2003/04/01 10:22:21
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
backout rekeying changes (for 3.6.1)
|
|
[monitor.c monitor_wrap.c]
fix permitrootlogin forced-commands-only for privsep; bux #387; ok provos@
|
|
[monitor.c monitor_wrap.c]
skey/bsdauth: use 0 to indicate failure instead of -1, because
the buffer API only supports unsigned ints.
|
|
[auth-krb5.c auth1.c hostfile.h monitor_wrap.c sftp-client.c sftp-int.c ssh-add.c ssh-rsa.c
sshconnect.c]
KNF
|
|
[auth1.c auth.h auth-krb4.c monitor.c monitor.h monitor_wrap.c]
[monitor_wrap.h]
krb4 + privsep; ok dugsong@, deraadt@
|
|
[channels.c kex.h key.c monitor.c monitor_wrap.c radix.c uuencode.c]
signed vs unsigned from -pedantic; ok henning@
|
|
[auth1.c auth.h auth-krb5.c monitor.c monitor.h]
[monitor_wrap.c monitor_wrap.h]
kerberos support for privsep. confirmed to work by lha@stacken.kth.se
patch from markus
|
|
[key.c monitor_wrap.c ssh-dss.c ssh-rsa.c]
don't allocate, copy, and discard if there is not interested in the data;
ok deraadt@
|
|
[key.c monitor_wrap.c sftp-glob.c ssh-dss.c ssh-rsa.c]
patch memory leaks; grendel@zeitbombe.org
|
|
[auth-bsdauth.c auth-skey.c auth2-chall.c clientloop.c key.c
monitor_wrap.c monitor_wrap.h scard.h session.h sftp-glob.c ssh.c
sshconnect2.c sshd.c]
minor KNF
|
|
[monitor_wrap.c]
use ssize_t
|
|
[monitor_wrap.c]
more %u
|
|
[cipher.c monitor.c monitor_wrap.c packet.c packet.h]
make the monitor sync the transfer ssh1 session key;
transfer keycontext only for RC4 (this is still depends on EVP
implementation details and is broken).
|
|
[auth-bsdauth.c auth-skey.c auth1.c auth2-chall.c auth2-none.c authfd.c
authfd.h monitor_wrap.c msg.c nchan.c radix.c readconf.c scp.c sftp.1
ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c
ssh-keysign.c ssh.1 sshconnect.c sshconnect.h sshconnect2.c ttymodes.c
xmalloc.h]
KNF done automatically while reading....
|
|
[monitor_wrap.c]
spelling; from Brian Poole <raj@cerias.purdue.edu>
|
|
[cipher.c monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c]
__FUNCTION__ -> __func__
NOTE: This includes all portable references also.
|
|
[kex.c monitor.c monitor_wrap.c sshd.c]
'monitor' variable clashes with at least one lame platform (NeXT). i
Renamed to 'pmonitor'. provos@
- (bal) Fixed up PAM case. I think.
|
|
|
|
|
|
[monitor_mm.c monitor_wrap.c]
ssize_t args use "%ld" and cast to (long)
size_t args use "%lu" and cast to (u_long)
ok markus@ and thanks millert@
|
|
|
|
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h
auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c
session.h servconf.h serverloop.c session.c sshd.c]
integrate privilege separated openssh; its turned off by default for now.
work done by me and markus@
applied, but outside of ensure that smaller code bits migrated with
their owners.. no work was tried to 'fix' it to work. =) Later project!
|
|
|
|
PAM, Cygwin and OSF SIA will not work for sure
|
