summaryrefslogtreecommitdiff
path: root/mux.c
AgeCommit message (Collapse)Author
2012-06-20 - djm@cvs.openbsd.org 2011/12/02 00:41:56Damien Miller
[mux.c] fix bz#1948: ssh -f doesn't fork for multiplexed connection. ok dtucker@
2012-02-11 - djm@cvs.openbsd.org 2012/01/07 21:11:36Damien Miller
[mux.c] fix double-free in new session handler
2011-12-19 - djm@cvs.openbsd.org 2011/12/04 23:16:12Damien Miller
[mux.c] revert: > revision 1.32 > date: 2011/12/02 00:41:56; author: djm; state: Exp; lines: +4 -1 > fix bz#1948: ssh -f doesn't fork for multiplexed connection. > ok dtucker@ it interacts badly with ControlPersist
2011-12-19 - djm@cvs.openbsd.org 2011/12/02 00:41:56Damien Miller
[mux.c] fix bz#1948: ssh -f doesn't fork for multiplexed connection. ok dtucker@
2011-10-02 - markus@cvs.openbsd.org 2011/09/23 07:45:05Darren Tucker
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h] unbreak remote portforwarding with dynamic allocated listen ports: 1) send the actual listen port in the open message (instead of 0). this allows multiple forwardings with a dynamic listen port 2) update the matching permit-open entry, so we can identify where to connect to report: den at skbkontur.ru and P. Szczygielski feedback and ok djm@
2011-09-22 - djm@cvs.openbsd.org 2011/09/09 22:46:44Damien Miller
[channels.c channels.h clientloop.h mux.c ssh.c] support for cancelling local and remote port forwards via the multiplex socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request the cancellation of the specified forwardings; ok markus@
2011-06-23 - djm@cvs.openbsd.org 2011/06/22 22:08:42Damien Miller
[channels.c channels.h clientloop.c clientloop.h mux.c ssh.c] hook up a channel confirm callback to warn the user then requested X11 forwarding was refused by the server; ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/08 12:52:01Damien Miller
[PROTOCOL.mux clientloop.c clientloop.h mux.c] improve our behaviour when TTY allocation fails: if we are in RequestTTY=auto mode (the default), then do not treat at TTY allocation error as fatal but rather just restore the local TTY to cooked mode and continue. This is more graceful on devices that never allocate TTYs. If RequestTTY is set to "yes" or "force", then failure to allocate a TTY is fatal. ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:34:32Damien Miller
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5] Add a RequestTTY ssh_config option to allow configuration-based control over tty allocation (like -t/-T); ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/05 05:12:08Damien Miller
[mux.c] gracefully fall back when ControlPath is too large for a sockaddr_un. ok markus@ as part of a larger diff
2011-05-05 - djm@cvs.openbsd.org 2011/04/17 22:42:42Damien Miller
[PROTOCOL.mux clientloop.c clientloop.h mux.c ssh.1 ssh.c] allow graceful shutdown of multiplexing: request that a mux server removes its listener socket and refuse future multiplexing requests; ok markus@
2011-01-14 - djm@cvs.openbsd.org 2011/01/13 21:54:53Damien Miller
[mux.c] correct error messages; patch from bert.wesarg AT googlemail.com
2010-10-21 - OpenBSD CVS SyncDamien Miller
- dtucker@cvs.openbsd.org 2010/10/12 02:22:24 [mux.c] Typo in confirmation message. bz#1827, patch from imorgan at nas nasa gov
2010-09-24 - djm@cvs.openbsd.org 2010/09/20 07:19:27Damien Miller
[mux.c] "atomically" create the listening mux socket by binding it on a temorary name and then linking it into position after listen() has succeeded. this allows the mux clients to determine that the server socket is either ready or stale without races. stale server sockets are now automatically removed ok deraadt
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 23:10:30Damien Miller
[ssh.c] log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts; "nice!" markus@
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 07:14:46Damien Miller
[channels.c mux.c readconf.c readconf.h ssh.h] bz#1327: remove hardcoded limit of 100 permitopen clauses and port forwards per direction; ok markus@ stevesk@
2010-06-26 - djm@cvs.openbsd.org 2010/06/17 07:07:30Damien Miller
[mux.c] Correct sizing of object to be allocated by calloc(), replacing sizeof(state) with sizeof(*state). This worked by accident since the struct contained a single int at present, but could have broken in the future. patch from hyc AT symas.com
2010-05-21 - markus@cvs.openbsd.org 2010/05/16 12:55:51Damien Miller
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c] mux support for remote forwarding with dynamic port allocation, use with LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost` feedback and ok djm@
2010-05-21 - djm@cvs.openbsd.org 2010/05/14 23:29:23Damien Miller
[channels.c channels.h mux.c ssh.c] Pause the mux channel while waiting for reply from aynch callbacks. Prevents misordering of replies if new requests arrive while waiting. Extend channel open confirm callback to allow signalling failure conditions as well as success. Use this to 1) fix a memory leak, 2) start using the above pause mechanism and 3) delay sending a success/ failure message on mux slave session open until we receive a reply from the server. motivated by and with feedback from markus@
2010-05-10 - djm@cvs.openbsd.org 2010/04/23 22:27:38Damien Miller
[mux.c] set "detach_close" flag when registering channel cleanup callbacks. This causes the channel to close normally when its fds close and hangs when terminating a mux slave using ~. bz#1758; ok markus@
2010-04-16 - djm@cvs.openbsd.org 2010/04/10 05:48:16Damien Miller
[mux.c] fix NULL dereference; from matthew.haub AT alumni.adelaide.edu.au
2010-01-30 - djm@cvs.openbsd.org 2010/01/29 20:16:17Damien Miller
[mux.c] kill correct channel (was killing already-dead mux channel, not its session channel)
2010-01-30 - djm@cvs.openbsd.org 2010/01/29 00:20:41Damien Miller
[sshd.c] set FD_CLOEXEC on sock_in/sock_out; bz#1706 from jchadima AT redhat.com ok dtucker@
2010-01-28 - djm@cvs.openbsd.org 2010/01/27 13:26:17Damien Miller
[mux.c] fix bug introduced in mux rewrite: In a mux master, when a socket to a mux slave closes before its server session (as may occur when the slave has been signalled), gracefully close the server session rather than deleting its channel immediately. A server may have more messages on that channel to send (e.g. an exit message) that will fatal() the client if they are sent to a channel that has been prematurely deleted. spotted by imorgan AT nas.nasa.gov
2010-01-28 - djm@cvs.openbsd.org 2010/01/26 02:15:20Damien Miller
[mux.c] -Wuninitialized and remove a // comment; from portable (Id sync only)
2010-01-26 - djm@cvs.openbsd.org 2010/01/26 01:28:35Damien Miller
[channels.c channels.h clientloop.c clientloop.h mux.c nchan.c ssh.c] rewrite ssh(1) multiplexing code to a more sensible protocol. The new multiplexing code uses channels for the listener and accepted control sockets to make the mux master non-blocking, so no stalls when processing messages from a slave. avoid use of fatal() in mux master protocol parsing so an errant slave process cannot take down a running master. implement requesting of port-forwards over multiplexed sessions. Any port forwards requested by the slave are added to those the master has established. add support for stdio forwarding ("ssh -W host:port ...") in mux slaves. document master/slave mux protocol so that other tools can use it to control a running ssh(1). Note: there are no guarantees that this protocol won't be incompatibly changed (though it is versioned). feedback Salvador Fandino, dtucker@ channel changes ok markus@
2010-01-09 - djm@cvs.openbsd.org 2010/01/09 05:04:24Darren Tucker
[mux.c sshpty.h clientloop.c sshtty.c] quell tc[gs]etattr warnings when forcing a tty (ssh -tt), since we usually don't actually have a tty to read/set; bz#1686 ok dtucker@
2009-10-07 - dtucker@cvs.openbsd.org 2009/08/20 23:54:28Darren Tucker
[mux.c] subsystem_flag is defined in ssh.c so it's extern; ok djm
2008-06-14 - dtucker@cvs.openbsd.org 2008/06/13 17:21:20Darren Tucker
[mux.c] Friendlier error messages for mux fallback. ok djm@
2008-06-13 - dtucker@cvs.openbsd.org 2008/06/13 00:47:53Darren Tucker
[mux.c] upcast size_t to u_long to match format arg; ok djm@
2008-06-13 - djm@cvs.openbsd.org 2008/06/13 00:16:49Darren Tucker
[mux.c] fall back to creating a new TCP connection on most multiplexing errors (socket connect fail, invalid version, refused permittion, corrupted messages, etc.); bz #1329 ok dtucker@
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 15:19:17Darren Tucker
[clientloop.h channels.h clientloop.c channels.c mux.c] The multiplexing escape char handler commit last night introduced a small memory leak per session; plug it.
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 05:32:30Darren Tucker
[mux.c] some more TODO for me
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 03:40:52Darren Tucker
[clientloop.h mux.c channels.c clientloop.c channels.h] Enable ~ escapes for multiplex slave sessions; give each channel its own escape state and hook the escape filters up to muxed channels. bz #1331 Mux slaves do not currently support the ~^Z and ~& escapes. NB. this change cranks the mux protocol version, so a new ssh mux client will not be able to connect to a running old ssh mux master. ok dtucker@
2008-06-07 - (dtucker) [mux.c] Include paths.h inside ifdef HAVE_PATHS_H.Darren Tucker
2008-05-20 - (djm) [configure.ac mux.c sftp.c openbsd-compat/Makefile.in]Damien Miller
[openbsd-compat/fmt_scaled.c openbsd-compat/openbsd-compat.h] Fix compilation on Linux, including pulling in fmt_scaled(3) implementation from OpenBSD's libutil.
2008-05-19 - djm@cvs.openbsd.org 2008/05/09 14:18:44Damien Miller
[clientloop.c clientloop.h ssh.c mux.c] tidy up session multiplexing code, moving it into its own file and making the function names more consistent - making ssh.c and clientloop.c a fair bit more readable. ok markus@