summaryrefslogtreecommitdiff
path: root/mux.c
AgeCommit message (Collapse)Author
2010-03-31Drop most of our "LogLevel SILENT" (-qq) patch. This was originallyColin Watson
introduced to match the behaviour of non-free SSH, in which -q does not suppress fatal errors, but matching the behaviour of OpenSSH upstream is much more important nowadays. We no longer document that -q does not suppress fatal errors (closes: #280609). Migrate "LogLevel SILENT" to "LogLevel QUIET" in sshd_config on upgrade.
2010-03-31* New upstream release (LP: #535029).Colin Watson
- After a transition period of about 10 years, this release disables SSH protocol 1 by default. Clients and servers that need to use the legacy protocol must explicitly enable it in ssh_config / sshd_config or on the command-line. - Remove the libsectok/OpenSC-based smartcard code and add support for PKCS#11 tokens. This support is enabled by default in the Debian packaging, since it now doesn't involve additional library dependencies (closes: #231472, LP: #16918). - Add support for certificate authentication of users and hosts using a new, minimal OpenSSH certificate format (closes: #482806). - Added a 'netcat mode' to ssh(1): "ssh -W host:port ...". - Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian package, this overlaps with the key blacklisting facility added in openssh 1:4.7p1-9, but with different file formats and slightly different scopes; for the moment, I've roughly merged the two.) - Various multiplexing improvements, including support for requesting port-forwardings via the multiplex protocol (closes: #360151). - Allow setting an explicit umask on the sftp-server(8) commandline to override whatever default the user has (closes: #496843). - Many sftp client improvements, including tab-completion, more options, and recursive transfer support for get/put (LP: #33378). The old mget/mput commands never worked properly and have been removed (closes: #270399, #428082). - Do not prompt for a passphrase if we fail to open a keyfile, and log the reason why the open failed to debug (closes: #431538). - Prevent sftp from crashing when given a "-" without a command. Also, allow whitespace to follow a "-" (closes: #531561).
2010-01-30 - djm@cvs.openbsd.org 2010/01/29 20:16:17Damien Miller
[mux.c] kill correct channel (was killing already-dead mux channel, not its session channel)
2010-01-30 - djm@cvs.openbsd.org 2010/01/29 00:20:41Damien Miller
[sshd.c] set FD_CLOEXEC on sock_in/sock_out; bz#1706 from jchadima AT redhat.com ok dtucker@
2010-01-28 - djm@cvs.openbsd.org 2010/01/27 13:26:17Damien Miller
[mux.c] fix bug introduced in mux rewrite: In a mux master, when a socket to a mux slave closes before its server session (as may occur when the slave has been signalled), gracefully close the server session rather than deleting its channel immediately. A server may have more messages on that channel to send (e.g. an exit message) that will fatal() the client if they are sent to a channel that has been prematurely deleted. spotted by imorgan AT nas.nasa.gov
2010-01-28 - djm@cvs.openbsd.org 2010/01/26 02:15:20Damien Miller
[mux.c] -Wuninitialized and remove a // comment; from portable (Id sync only)
2010-01-26 - djm@cvs.openbsd.org 2010/01/26 01:28:35Damien Miller
[channels.c channels.h clientloop.c clientloop.h mux.c nchan.c ssh.c] rewrite ssh(1) multiplexing code to a more sensible protocol. The new multiplexing code uses channels for the listener and accepted control sockets to make the mux master non-blocking, so no stalls when processing messages from a slave. avoid use of fatal() in mux master protocol parsing so an errant slave process cannot take down a running master. implement requesting of port-forwards over multiplexed sessions. Any port forwards requested by the slave are added to those the master has established. add support for stdio forwarding ("ssh -W host:port ...") in mux slaves. document master/slave mux protocol so that other tools can use it to control a running ssh(1). Note: there are no guarantees that this protocol won't be incompatibly changed (though it is versioned). feedback Salvador Fandino, dtucker@ channel changes ok markus@
2010-01-09 - djm@cvs.openbsd.org 2010/01/09 05:04:24Darren Tucker
[mux.c sshpty.h clientloop.c sshtty.c] quell tc[gs]etattr warnings when forcing a tty (ssh -tt), since we usually don't actually have a tty to read/set; bz#1686 ok dtucker@
2009-10-07 - dtucker@cvs.openbsd.org 2009/08/20 23:54:28Darren Tucker
[mux.c] subsystem_flag is defined in ssh.c so it's extern; ok djm
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-06-14 - dtucker@cvs.openbsd.org 2008/06/13 17:21:20Darren Tucker
[mux.c] Friendlier error messages for mux fallback. ok djm@
2008-06-13 - dtucker@cvs.openbsd.org 2008/06/13 00:47:53Darren Tucker
[mux.c] upcast size_t to u_long to match format arg; ok djm@
2008-06-13 - djm@cvs.openbsd.org 2008/06/13 00:16:49Darren Tucker
[mux.c] fall back to creating a new TCP connection on most multiplexing errors (socket connect fail, invalid version, refused permittion, corrupted messages, etc.); bz #1329 ok dtucker@
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 15:19:17Darren Tucker
[clientloop.h channels.h clientloop.c channels.c mux.c] The multiplexing escape char handler commit last night introduced a small memory leak per session; plug it.
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 05:32:30Darren Tucker
[mux.c] some more TODO for me
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 03:40:52Darren Tucker
[clientloop.h mux.c channels.c clientloop.c channels.h] Enable ~ escapes for multiplex slave sessions; give each channel its own escape state and hook the escape filters up to muxed channels. bz #1331 Mux slaves do not currently support the ~^Z and ~& escapes. NB. this change cranks the mux protocol version, so a new ssh mux client will not be able to connect to a running old ssh mux master. ok dtucker@
2008-06-07 - (dtucker) [mux.c] Include paths.h inside ifdef HAVE_PATHS_H.Darren Tucker
2008-05-20 - (djm) [configure.ac mux.c sftp.c openbsd-compat/Makefile.in]Damien Miller
[openbsd-compat/fmt_scaled.c openbsd-compat/openbsd-compat.h] Fix compilation on Linux, including pulling in fmt_scaled(3) implementation from OpenBSD's libutil.
2008-05-19 - djm@cvs.openbsd.org 2008/05/09 14:18:44Damien Miller
[clientloop.c clientloop.h ssh.c mux.c] tidy up session multiplexing code, moving it into its own file and making the function names more consistent - making ssh.c and clientloop.c a fair bit more readable. ok markus@