summaryrefslogtreecommitdiff
path: root/mux.c
AgeCommit message (Collapse)Author
2017-09-22upstream commitdtucker@openbsd.org
Use strsignal in debug message instead of casting for the benefit of portable where sig_atomic_t might not be int. "much nicer" deraadt@ Upstream-ID: 2dac6c1e40511c700bd90664cd263ed2299dcf79
2017-09-19upstream commitdtucker@openbsd.org
Prevent type mismatch warning in debug on platforms where sig_atomic_t != int. ok djm@ Upstream-ID: 306e2375eb0364a4c68e48f091739bea4f4892ed
2017-09-12upstream commitdjm@openbsd.org
Make remote channel ID a u_int Previously we tracked the remote channel IDs in an int, but this is strictly incorrect: the wire protocol uses uint32 and there is nothing in-principle stopping a SSH implementation from sending, say, 0xffff0000. In practice everyone numbers their channels sequentially, so this has never been a problem. ok markus@ Upstream-ID: b9f4cd3dc53155b4a5c995c0adba7da760d03e73
2017-09-12upstream commitdjm@openbsd.org
refactor channels.c Move static state to a "struct ssh_channels" that is allocated at runtime and tracked as a member of struct ssh. Explicitly pass "struct ssh" to all channels functions. Replace use of the legacy packet APIs in channels.c. Rework sshd_config PermitOpen handling: previously the configuration parser would call directly into the channels layer. After the refactor this is not possible, as the channels structures are allocated at connection time and aren't available when the configuration is parsed. The server config parser now tracks PermitOpen itself and explicitly configures the channels code later. ok markus@ Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
2017-06-10upstream commitdjm@openbsd.org
return failure rather than fatal() for more cases during mux negotiations. Causes the session to fall back to a non-mux connection if they occur. bz#2707 ok dtucker@ Upstream-ID: d2a7892f464d434e1f615334a1c9d0cdb83b29ab
2017-01-30upstream commitguenther@openbsd.org
The POSIX APIs that that sockaddrs all ignore the s*_len field in the incoming socket, so userspace doesn't need to set it unless it has its own reasons for tracking the size along with the sockaddr. ok phessler@ deraadt@ florian@ Upstream-ID: ca6e49e2f22f2b9e81d6d924b90ecd7e422e7437
2016-10-24upstream commitdtucker@openbsd.org
When tearing down ControlMaster connecctions, don't pollute stderr when LogLevel=quiet. Patch from Tim Kuijsten via tech@. Upstream-ID: d9b3a68b2a7c2f2fc7f74678e29a4618d55ceced
2016-10-01upstream commitmarkus@openbsd.org
ssh proxy mux mode (-O proxy; idea from Simon Tatham): - mux client speaks the ssh-packet protocol directly over unix-domain socket. - mux server acts as a proxy, translates channel IDs and relays to the server. - no filedescriptor passing necessary. - combined with unix-domain forwarding it's even possible to run mux client and server on different machines. feedback & ok djm@ Upstream-ID: 666a2fb79f58e5c50e246265fb2b9251e505c25b
2016-08-09upstream commitdtucker@openbsd.org
Improve error message for overlong ControlPath. ok markus@ djm@ Upstream-ID: aed374e2e88dd3eb41390003e5303d0089861eb5
2016-06-08upstream commitdtucker@openbsd.org
Move the host and port used by ssh -W into the Options struct. This will make future changes a bit easier. ok djm@ Upstream-ID: 151bce5ecab2fbedf0d836250a27968d30389382
2016-04-01upstream commitdjm@openbsd.org
whitespace at EOL Upstream-ID: 40ae2203d07cb14e0a89e1a0d4c6120ee8fd8c3a
2016-01-14upstream commitdjm@openbsd.org
eliminate fallback from untrusted X11 forwarding to trusted forwarding when the X server disables the SECURITY extension; Reported by Thomas Hoger; ok deraadt@ Upstream-ID: f76195bd2064615a63ef9674a0e4096b0713f938
2016-01-08Support Illumos/Solaris fine-grained privilegesDamien Miller
Includes a pre-auth privsep sandbox and several pledge() emulations. bz#2511, patch by Alex Wilson. ok dtucker@
2016-01-07upstream commitsemarie@openbsd.org
adjust pledge promises for ControlMaster: when using "ask" or "autoask", the process will use ssh-askpass for asking confirmation. problem found by halex@ ok halex@ Upstream-ID: 38a58b30ae3eef85051c74d3c247216ec0735f80
2015-12-04upstream commitsemarie@openbsd.org
pledges ssh client: - mux client: which is used when ControlMaster is in use. will end with "stdio proc tty" (proc is to permit sending SIGWINCH to mux master on window resize) - client loop: several levels of pledging depending of your used options ok deraadt@ Upstream-ID: 21676155a700e51f2ce911e33538e92a2cd1d94b
2015-10-16upstream commitdjm@openbsd.org
fix some signed/unsigned integer type mismatches in format strings; reported by Nicholas Lemonias Upstream-ID: 78cd55420a0eef68c4095bdfddd1af84afe5f95c
2015-08-20upstream commitdjm@openbsd.org
fix free() of uninitialised pointer reported by Mateusz Kocielski; ok markus@ Upstream-ID: 519552b050618501a06b7b023de5cb104e2c5663
2015-05-10upstream commitdjm@openbsd.org
remove failed remote forwards established by muliplexing from the list of active forwards; bz#2363, patch mostly by Yoann Ricordel; ok dtucker@
2015-05-10upstream commitdjm@openbsd.org
reduce stderr spam when using ssh -S /path/mux -O forward -R 0:... ok dtucker@
2015-04-29upstream commitderaadt@openbsd.org
rename xrealloc() to xreallocarray() since it follows that form. ok djm
2015-01-26upstream commitderaadt@openbsd.org
Reduce use of <sys/param.h> and transition to <limits.h> throughout. ok djm markus
2014-12-22upstream commitdjm@openbsd.org
fix passing of wildcard forward bind addresses when connection multiplexing is in use; patch from Sami Hartikainen via bz#2324; ok dtucker@
2014-07-18 - djm@cvs.openbsd.org 2014/07/17 07:22:19Damien Miller
[mux.c ssh.c] reflect stdio-forward ("ssh -W host:port ...") failures in exit status. previously we were always returning 0. bz#2255 reported by Brendan Germain; ok dtucker
2014-07-18 - djm@cvs.openbsd.org 2014/07/17 00:10:18Damien Miller
[mux.c] preserve errno across syscall
2014-07-18 - millert@cvs.openbsd.org 2014/07/15 15:54:14Damien Miller
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c] [auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h] [clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c] [readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c] [ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c] [sshd_config.5 sshlogin.c] Add support for Unix domain socket forwarding. A remote TCP port may be forwarded to a local Unix domain socket and vice versa or both ends may be a Unix domain socket. This is a reimplementation of the streamlocal patches by William Ahern from: http://www.25thandclement.com/~william/projects/streamlocal.html OK djm@ markus@
2014-05-15 - djm@cvs.openbsd.org 2014/04/28 03:09:18Damien Miller
[authfile.c bufaux.c buffer.h channels.c krl.c mux.c packet.c packet.h] [ssh-keygen.c] buffer_get_string_ptr's return should be const to remind callers that futzing with it will futz with the actual buffer contents
2013-07-18 - djm@cvs.openbsd.org 2013/07/12 00:19:59Damien Miller
[auth-options.c auth-rsa.c bufaux.c buffer.h channels.c hostfile.c] [hostfile.h mux.c packet.c packet.h roaming_common.c serverloop.c] fix pointer-signedness warnings from clang/llvm-3.3; "seems nice" deraadt@
2013-06-06 - dtucker@cvs.openbsd.org 2013/06/05 02:07:29Darren Tucker
[mux.c] fix leaks in mux error paths, from Zhenbo Xu, found by Melton. bz#1967, ok djm
2013-06-06 - dtucker@cvs.openbsd.org 2013/06/02 23:36:29Darren Tucker
[clientloop.h clientloop.c mux.c] No need for the mux cleanup callback to be visible so restore it to static and call it through the detach_user function pointer. ok djm@
2013-06-02 - djm@cvs.openbsd.org 2013/05/17 00:13:13Darren Tucker
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c dns.c packet.c readpass.c authfd.c moduli.c] bye, bye xfree(); ok markus@
2013-04-23 - dtucker@cvs.openbsd.org 2013/04/22 01:17:18Damien Miller
[mux.c] typo in debug output: evitval->exitval
2013-04-23 - djm@cvs.openbsd.org 2013/04/05 00:58:51Damien Miller
[mux.c] cleanup mux-created channels that are in SSH_CHANNEL_OPENING state too (in addition to ones already in OPEN); bz#2079, ok dtucker@
2013-02-23 - (djm) [configure.ac includes.h loginrec.c mux.c sftp.c] PreferDamien Miller
bsd/libutil.h to libutil.h to avoid deprecation warnings on Ubuntu. ok tim
2013-01-09 - djm@cvs.openbsd.org 2013/01/02 00:32:07Damien Miller
[clientloop.c mux.c] channel_setup_local_fwd_listener() returns 0 on failure, not -ve bz#2055 reported by mathieu.lacage AT gmail.com
2012-09-06 - dtucker@cvs.openbsd.org 2012/08/17 00:45:45Darren Tucker
[clientloop.c clientloop.h mux.c] Force a clean shutdown of ControlMaster client sessions when the ~. escape sequence is used. This means that ~. should now work in mux clients even if the server is no longer responding. Found by tedu, ok djm.
2012-07-06 - djm@cvs.openbsd.org 2012/07/06 01:37:21Damien Miller
[mux.c] fix memory leak of passed-in environment variables and connection context when new session message is malformed; bz#2003 from Bert.Wesarg AT googlemail.com
2012-06-20 - djm@cvs.openbsd.org 2012/06/01 01:01:22Damien Miller
[mux.c] fix memory leak when mux socket creation fails; bz#2002 from bert.wesarg AT googlemail.com
2012-06-20 - djm@cvs.openbsd.org 2012/01/07 21:11:36Damien Miller
[mux.c] fix double-free in new session handler NB. Id sync only
2012-06-20 - djm@cvs.openbsd.org 2011/12/04 23:16:12Damien Miller
[mux.c] revert: > revision 1.32 > date: 2011/12/02 00:41:56; author: djm; state: Exp; lines: +4 -1 > fix bz#1948: ssh -f doesn't fork for multiplexed connection. > ok dtucker@ it interacts badly with ControlPersist
2012-06-20 - djm@cvs.openbsd.org 2011/12/02 00:41:56Damien Miller
[mux.c] fix bz#1948: ssh -f doesn't fork for multiplexed connection. ok dtucker@
2012-02-11 - djm@cvs.openbsd.org 2012/01/07 21:11:36Damien Miller
[mux.c] fix double-free in new session handler
2011-12-19 - djm@cvs.openbsd.org 2011/12/04 23:16:12Damien Miller
[mux.c] revert: > revision 1.32 > date: 2011/12/02 00:41:56; author: djm; state: Exp; lines: +4 -1 > fix bz#1948: ssh -f doesn't fork for multiplexed connection. > ok dtucker@ it interacts badly with ControlPersist
2011-12-19 - djm@cvs.openbsd.org 2011/12/02 00:41:56Damien Miller
[mux.c] fix bz#1948: ssh -f doesn't fork for multiplexed connection. ok dtucker@
2011-10-02 - markus@cvs.openbsd.org 2011/09/23 07:45:05Darren Tucker
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h] unbreak remote portforwarding with dynamic allocated listen ports: 1) send the actual listen port in the open message (instead of 0). this allows multiple forwardings with a dynamic listen port 2) update the matching permit-open entry, so we can identify where to connect to report: den at skbkontur.ru and P. Szczygielski feedback and ok djm@
2011-09-22 - djm@cvs.openbsd.org 2011/09/09 22:46:44Damien Miller
[channels.c channels.h clientloop.h mux.c ssh.c] support for cancelling local and remote port forwards via the multiplex socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request the cancellation of the specified forwardings; ok markus@
2011-06-23 - djm@cvs.openbsd.org 2011/06/22 22:08:42Damien Miller
[channels.c channels.h clientloop.c clientloop.h mux.c ssh.c] hook up a channel confirm callback to warn the user then requested X11 forwarding was refused by the server; ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/08 12:52:01Damien Miller
[PROTOCOL.mux clientloop.c clientloop.h mux.c] improve our behaviour when TTY allocation fails: if we are in RequestTTY=auto mode (the default), then do not treat at TTY allocation error as fatal but rather just restore the local TTY to cooked mode and continue. This is more graceful on devices that never allocate TTYs. If RequestTTY is set to "yes" or "force", then failure to allocate a TTY is fatal. ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:34:32Damien Miller
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5] Add a RequestTTY ssh_config option to allow configuration-based control over tty allocation (like -t/-T); ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/05 05:12:08Damien Miller
[mux.c] gracefully fall back when ControlPath is too large for a sockaddr_un. ok markus@ as part of a larger diff
2011-05-05 - djm@cvs.openbsd.org 2011/04/17 22:42:42Damien Miller
[PROTOCOL.mux clientloop.c clientloop.h mux.c ssh.1 ssh.c] allow graceful shutdown of multiplexing: request that a mux server removes its listener socket and refuse future multiplexing requests; ok markus@