| Age | Commit message (Collapse) | Author |
|---|
|
- Introduce sandboxing of the pre-auth privsep child using an optional
sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables
mandatory restrictions on the syscalls the privsep child can perform.
- Add new SHA256-based HMAC transport integrity modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt.
- The pre-authentication sshd(8) privilege separation slave process now
logs via a socket shared with the master process, avoiding the need to
maintain /dev/log inside the chroot (closes: #75043, #429243,
#599240).
- ssh(1) now warns when a server refuses X11 forwarding (closes:
#504757).
- sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths,
separated by whitespace (closes: #76312). The authorized_keys2
fallback is deprecated but documented (closes: #560156).
- ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4
ToS/DSCP (closes: #498297).
- ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add
- < /path/to/key" (closes: #229124).
- Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691).
- Say "required" rather than "recommended" in unprotected-private-key
warning (LP: #663455).
|
|
- djm@cvs.openbsd.org 2011/05/23 03:30:07
[auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
allow AuthorizedKeysFile to specify multiple files, separated by spaces.
Bring back authorized_keys2 as a default search path (to avoid breaking
existing users of this file), but override this in sshd_config so it will
be no longer used on fresh installs. Maybe in 2015 we can remove it
entierly :)
feedback and ok markus@ dtucker@
|
|
[auth.c auth.h auth2-pubkey.c pathnames.h servconf.c servconf.h]
remove support for authorized_keys2; it is a relic from the early days
of protocol v.2 support and has been undocumented for many years;
ok markus@
|
|
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH)
and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA
offer better performance than plain DH and DSA at the same equivalent
symmetric key length, as well as much shorter keys.
- sftp(1)/sftp-server(8): add a protocol extension to support a hard
link operation. It is available through the "ln" command in the
client. The old "ln" behaviour of creating a symlink is available
using its "-s" option or through the preexisting "symlink" command.
- scp(1): Add a new -3 option to scp: Copies between two remote hosts
are transferred through the local host (closes: #508613).
- ssh(1): "atomically" create the listening mux socket by binding it on
a temporary name and then linking it into position after listen() has
succeeded. This allows the mux clients to determine that the server
socket is either ready or stale without races (closes: #454784).
Stale server sockets are now automatically removed (closes: #523250).
- ssh(1): install a SIGCHLD handler to reap expired child process
(closes: #594687).
- ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent
temporary directories (closes: #357469, although only if you arrange
for ssh-agent to actually see $TMPDIR since the setgid bit will cause
it to be stripped off).
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
- After a transition period of about 10 years, this release disables SSH
protocol 1 by default. Clients and servers that need to use the
legacy protocol must explicitly enable it in ssh_config / sshd_config
or on the command-line.
- Remove the libsectok/OpenSC-based smartcard code and add support for
PKCS#11 tokens. This support is enabled by default in the Debian
packaging, since it now doesn't involve additional library
dependencies (closes: #231472, LP: #16918).
- Add support for certificate authentication of users and hosts using a
new, minimal OpenSSH certificate format (closes: #482806).
- Added a 'netcat mode' to ssh(1): "ssh -W host:port ...".
- Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian
package, this overlaps with the key blacklisting facility added in
openssh 1:4.7p1-9, but with different file formats and slightly
different scopes; for the moment, I've roughly merged the two.)
- Various multiplexing improvements, including support for requesting
port-forwardings via the multiplex protocol (closes: #360151).
- Allow setting an explicit umask on the sftp-server(8) commandline to
override whatever default the user has (closes: #496843).
- Many sftp client improvements, including tab-completion, more options,
and recursive transfer support for get/put (LP: #33378). The old
mget/mput commands never worked properly and have been removed
(closes: #270399, #428082).
- Do not prompt for a passphrase if we fail to open a keyfile, and log
the reason why the open failed to debug (closes: #431538).
- Prevent sftp from crashing when given a "-" without a command. Also,
allow whitespace to follow a "-" (closes: #531561).
|
|
[pathnames.h]
correct comment
|
|
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
|
|
for a while, but there's no GSSAPI patch available for it yet.
- Change the default cipher order to prefer the AES CTR modes and the
revised "arcfour256" mode to CBC mode ciphers that are susceptible to
CPNI-957037 "Plaintext Recovery Attack Against SSH".
- Add countermeasures to mitigate CPNI-957037-style attacks against the
SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid
packet length or Message Authentication Code, ssh/sshd will continue
reading up to the maximum supported packet length rather than
immediately terminating the connection. This eliminates most of the
known differences in behaviour that leaked information about the
plaintext of injected data which formed the basis of this attack
(closes: #506115, LP: #379329).
- ForceCommand directive now accepts commandline arguments for the
internal-sftp server (closes: #524423, LP: #362511).
- Add AllowAgentForwarding to available Match keywords list (closes:
#540623).
- Make ssh(1) send the correct channel number for
SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to
avoid triggering 'Non-public channel' error messages on sshd(8) in
openssh-5.1.
- Avoid printing 'Non-public channel' warnings in sshd(8), since the
ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a
behaviour introduced in openssh-5.1; closes: #496017).
* Update to GSSAPI patch from
http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch,
including cascading credentials support (LP: #416958).
|
|
[pathnames.h]
no need to escape single quotes in comments
|
|
#481283).
|
|
- Add key blacklisting support. Keys listed in
/etc/ssh/blacklist.TYPE-LENGTH will be rejected for authentication by
sshd, unless "PermitBlacklistedKeys yes" is set in
/etc/ssh/sshd_config.
- Add a new program, ssh-vulnkey, which can be used to check keys
against these blacklists.
- Depend on openssh-blacklist.
- Force dependencies on libssl0.9.8 / libcrypto0.9.8-udeb to at least
0.9.8g-9.
- Automatically regenerate known-compromised host keys, with a
critical-priority debconf note. (I regret that there was no time to
gather translations.)
|
|
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h]
[bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h]
[compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h]
[dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c]
[gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h]
[misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h]
[myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h]
[scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h]
[ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h]
[ttymodes.h uidswap.h uuencode.h xmalloc.h]
standardise spacing in $OpenBSD$ tags; requested by deraadt@
|
|
[channels.c cipher.c clientloop.c clientloop.h compat.h moduli.c
readconf.c nchan.c pathnames.h progressmeter.c readconf.h servconf.c
session.c sftp-client.c sftp.c ssh-agent.1 ssh-keygen.c ssh.c ssh1.h
sshd.c ttymodes.h]
spaces
|
|
|
|
[auth-passwd.c auth.h pathnames.h session.c]
support for password change; ok dtucker@
(set password-dead=1w in login.conf to use this).
In -Portable, this is currently only platforms using bsdauth.
|
|
[authfile.c authfile.h pathnames.h ssh.c sshconnect.c sshconnect.h
sshconnect1.c sshconnect2.c ssh-keysign.8 ssh-keysign.c Makefile.in]
add /usr/libexec/ssh-keysign: a setuid helper program for hostbased
authentication in protocol v2 (needs to access the hostkeys).
Note: Makefile.in untested. Will test after merge is finished.
|
|
|
|
[pathnames.h servconf.c servconf.h sshd.c]
_PATH_PRIVSEP_CHROOT_DIR; ok provos@
|
|
- deraadt@cvs.openbsd.org 2002/02/09 17:37:34
[pathnames.h session.c ssh.1 sshd.8 sshd_config ssh-keyscan.1]
move ssh config files to /etc/ssh
- (djm) Adjust portable Makefile.in tnd ssh-rand-helper.c o match
|
|
solar@openwall.com
- (djm) Rework entropy code. If the OpenSSL PRNG is has not been
internally seeded, execute a subprogram "ssh-rand-helper" to obtain
some entropy for us. Rewrite the old in-process entropy collecter as
an example ssh-rand-helper.
- (djm) Always perform ssh_prng_cmds path lookups in configure, even if
we don't end up using ssh_prng_cmds (so we always get a valid file)
|
|
[channels.c pathnames.h]
use only one path to X11 UNIX domain socket vs. an array of paths
to try. report from djast@cs.toronto.edu. ok markus@
|
|
|
|
[kexdh.c kexgex.c kex.h pathnames.h readconf.c servconf.h ssh.1
sshconnect1.c sshconnect2.c sshconnect.c sshconnect.h sshd.8]
get rid of known_hosts2, use it for hostkey lookup, but do not
modify.
|
|
[auth2.c auth-rsa.c pathnames.h ssh.1 sshd.8 sshd_config
ssh-keygen.1]
merge authorized_keys2 into authorized_keys.
authorized_keys2 is used for backward compat.
(just append authorized_keys2 to authorized_keys).
|
|
[dh.c pathnames.h]
use /etc/moduli instead of /etc/primes, okay markus@
|
|
[includes.h pathnames.h readconf.c servconf.c]
move the path for xauth to pathnames.h
|
|
[auth-rhosts.c auth.h auth2.c buffer.c canohost.c canohost.h
compat.c compat.h hostfile.c pathnames.h readconf.c readconf.h
servconf.c servconf.h ssh.c sshconnect.c sshconnect.h sshconnect1.c
sshconnect2.c sshd_config]
implement HostbasedAuthentication (= RhostRSAAuthentication for ssh v2)
similar to RhostRSAAuthentication unless you enable (the experimental)
HostbasedUsesNameFromPacketOnly option. please test. :)
|
|
<tim@multitalents.net>
- (djm) Avoid multiple definition of _PATH_LS. Patch from Tim Rice
<tim@multitalents.net>
|
|
- djm@cvs.openbsd.org 2001/02/07 03:55:13
[sftp-client.c]
Don't free handles before we are done with them. Based on work from
Corinna Vinschen <vinschen@redhat.com>. ok markus@
- djm@cvs.openbsd.org 2001/02/06 22:32:53
[sftp.1]
Punctuation fix from Pekka Savola <pekkas@netcore.fi>
- deraadt@cvs.openbsd.org 2001/02/07 04:07:29
[sftp.1]
pretty up significantly
- itojun@cvs.openbsd.org 2001/02/07 06:49:42
[sftp.1]
.Bl-.El mismatch. markus ok
- djm@cvs.openbsd.org 2001/02/07 06:12:30
[sftp-int.c]
Check that target is a directory before doing ls; ok markus@
- itojun@cvs.openbsd.org 2001/02/07 11:01:18
[scp.c sftp-client.c sftp-server.c]
unsigned long long -> %llu, not %qu. markus ok
- stevesk@cvs.openbsd.org 2001/02/07 11:10:39
[sftp.1 sftp-int.c]
more man page cleanup and sync of help text with man page; ok markus@
- markus@cvs.openbsd.org 2001/02/07 14:58:34
[sftp-client.c]
older servers reply with SSH2_FXP_NAME + count==0 instead of EOF
- djm@cvs.openbsd.org 2001/02/07 15:27:19
[sftp.c]
Don't forward agent and X11 in sftp. Suggestion from Roumen Petrov
<roumen.petrov@skalasoft.com>
- stevesk@cvs.openbsd.org 2001/02/07 15:36:04
[sftp-int.c]
portable; ok markus@
- stevesk@cvs.openbsd.org 2001/02/07 15:55:47
[sftp-int.c]
lowercase cmds[].c also; ok markus@
- markus@cvs.openbsd.org 2001/02/07 17:04:52
[pathnames.h sftp.c]
allow sftp over ssh protocol 1; ok djm@
- deraadt@cvs.openbsd.org 2001/02/08 07:38:55
[scp.c]
memory leak fix, and snprintf throughout
- deraadt@cvs.openbsd.org 2001/02/08 08:02:02
[sftp-int.c]
plug a memory leak
- stevesk@cvs.openbsd.org 2001/02/08 10:11:23
[session.c sftp-client.c]
%i -> %d
- stevesk@cvs.openbsd.org 2001/02/08 10:57:59
[sftp-int.c]
typo
- stevesk@cvs.openbsd.org 2001/02/08 15:28:07
[sftp-int.c pathnames.h]
_PATH_LS; ok markus@
- djm@cvs.openbsd.org 2001/02/09 04:46:25
[sftp-int.c]
Check for NULL attribs for chown, chmod & chgrp operations, only send
relevant attribs back to server; ok markus@
- (djm) Update makefile.in for _PATH_SFTP_SERVER
|
|
[atomicio.h canohost.h clientloop.h deattack.h dh.h dispatch.h
groupaccess.c groupaccess.h hmac.h hostfile.h includes.h kex.h
key.h log.h login.h match.h misc.h myproposal.h nchan.ms pathnames.h
radix.h readpass.h rijndael.h serverloop.h session.h sftp.h ssh-add.1
ssh-dss.h ssh-keygen.1 ssh-keyscan.1 ssh-rsa.h ssh1.h ssh_config
sshconnect.h sshd_config tildexpand.h uidswap.h uuencode.h]
$OpenBSD$
|
|
Petrov <roumen.petrov@skalasoft.com>
|
|
- (bal) regexp.h typo in configure.in. Should have been regex.h
- (bal) SSH_USER_DIR to _PATH_SSH_USER_DIR patch by stevesk@
|
|
Linux and works. So that is at least a good sign. =)
20010122
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/19 12:45:26 GMT 2001 by markus
[servconf.c ssh.h sshd.c]
only auth-chall.c needs #ifdef SKEY
- markus@cvs.openbsd.org 2001/01/19 15:55:10 GMT 2001 by markus
[auth-krb4.c auth-options.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth1.c auth2.c channels.c clientloop.c dh.c dispatch.c nchan.c
packet.c pathname.h readconf.c scp.c servconf.c serverloop.c
session.c ssh-add.c ssh-keygen.c ssh-keyscan.c ssh.c ssh.h
ssh1.h sshconnect1.c sshd.c ttymodes.c]
move ssh1 definitions to ssh1.h, pathnames to pathnames.h
- markus@cvs.openbsd.org 2001/01/19 16:48:14
[sshd.8]
fix typo; from stevesk@
- markus@cvs.openbsd.org 2001/01/19 16:50:58
[ssh-dss.c]
clear and free digest, make consistent with other code (use dlen); from
stevesk@
- markus@cvs.openbsd.org 2001/01/20 15:55:20 GMT 2001 by markus
[auth-options.c auth-options.h auth-rsa.c auth2.c]
pass the filename to auth_parse_options()
- markus@cvs.openbsd.org 2001/01/20 17:59:40 GMT 2001
[readconf.c]
fix SIGSEGV from -o ""; problem noted by jehsom@togetherweb.com
- stevesk@cvs.openbsd.org 2001/01/20 18:20:29
[sshconnect2.c]
dh_new_group() does not return NULL. ok markus@
- markus@cvs.openbsd.org 2001/01/20 21:33:42
[ssh-add.c]
do not loop forever if askpass does not exist; from
andrew@pimlott.ne.mediaone.net
- djm@cvs.openbsd.org 2001/01/20 23:00:56
[servconf.c]
Check for NULL return from strdelim; ok markus
- djm@cvs.openbsd.org 2001/01/20 23:02:07
[readconf.c]
KNF; ok markus
- jakob@cvs.openbsd.org 2001/01/21 9:00:33
[ssh-keygen.1]
remove -R flag; ok markus@
- markus@cvs.openbsd.org 2001/01/21 19:05:40
[atomicio.c automicio.h auth-chall.c auth-krb4.c auth-options.c
auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth.c auth.h auth1.c auth2-chall.c auth2.c authfd.c authfile.c
bufaux.c bufaux.h buffer.c canahost.c canahost.h channels.c
cipher.c cli.c clientloop.c clientloop.h compat.c compress.c
deattack.c dh.c dispatch.c groupaccess.c hmac.c hostfile.c kex.c
key.c key.h log-client.c log-server.c log.c log.h login.c login.h
match.c misc.c misc.h nchan.c packet.c pty.c radix.h readconf.c
readpass.c readpass.h rsa.c scp.c servconf.c serverloop.c serverloop.h
session.c sftp-server.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c
ssh-keyscan.c ssh-rsa.c ssh.c ssh.h sshconnect.c sshconnect.h
sshconnect1.c sshconnect2.c sshd.c tildexpand.c tildexpand.h
ttysmodes.c uidswap.c xmalloc.c]
split ssh.h and try to cleanup the #include mess. remove unnecessary
#includes. rename util.[ch] -> misc.[ch]
- (bal) renamed 'PIDDIR' to '_PATH_SSH_PIDDIR' to match OpenBSD tree
- (bal) Moved #ifdef KRB4 in auth-krb4.c above the #include to resolve
conflict when compiling for non-kerb install
- (bal) removed the #ifdef SKEY in auth1.c to match Markus' changes
on 1/19.
|
