Age | Commit message (Collapse) | Author |
|
Explicitly check for 100% completion to avoid potential
floating point rounding error, which could cause progressmeter to report 99%
on completion. While there invert the test so the 100% case is clearer. with
& ok djm@
Upstream-ID: a166870c5878e422f3c71ff802e2ccd7032f715d
|
|
Backout rev. 1.43 for now.
The function update_progress_meter() calls refresh_progress_meter()
which calls snmprintf() which calls malloc(); but update_progress_meter()
acts as the SIGALRM signal handler.
"malloc(): error: recursive call" reported by sobrado@.
Upstream-ID: aaae57989431e5239c101f8310f74ccc83aeb93e
|
|
To prevent screwing up terminal settings when printing to
the terminal, for ASCII and UTF-8, escape bytes not forming characters and
bytes forming non-printable characters with vis(3) VIS_OCTAL. For other
character sets, abort printing of the current string in these cases. In
particular, * let scp(1) respect the local user's LC_CTYPE locale(1); *
sanitize data received from the remote host; * sanitize filenames, usernames,
and similar data even locally; * take character display widths into account
for the progressmeter.
This is believed to be sufficient to keep the local terminal safe
on OpenBSD, but bad things can still happen on other systems with
state-dependent locales because many places in the code print
unencoded ASCII characters into the output stream.
Using feedback from djm@ and martijn@,
various aspects discussed with many others.
deraadt@ says it should go in now, i probably already hesitated too long
Upstream-ID: e66afbc94ee396ddcaffd433b9a3b80f387647e0
|
|
Improve precision of progressmeter for sftp and scp by
storing sub-second timestamps. Pointed out by mmcc@, ok deraadt@ markus@
Upstream-ID: 38fd83a3d83dbf81c8ff7b5d1302382fe54970ab
|
|
update sftp client and server to new buffer API. pretty
much just mechanical changes; with & ok markus
|
|
[progressmeter.c]
store the initial file offset so the progress meter doesn't freak out
when resuming sftp transfers. bz#2137; patch from Iain Morgan; ok dtucker@
|
|
[progressmeter.c]
Add misc.h for monotime prototype. (id sync only)
|
|
[ssh-agent.c clientloop.c misc.h packet.c progressmeter.c misc.c
channels.c sandbox-systrace.c]
Use clock_gettime(CLOCK_MONOTONIC ...) for ssh timers so that things like
keepalives and rekeying will work properly over clock steps. Suggested by
markus@, "looks good" djm@.
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[authfile.c channels.c progressmeter.c scard.c servconf.c ssh.c]
clean extra spaces
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
|
[includes.h moduli.c progressmeter.c scp.c sftp-common.c]
[sftp-server.c ssh-agent.c sshlogin.c]
move #include <time.h> out of includes.h
|
|
[progressmeter.c]
ARGSUSED for signal handler
|
|
[authfd.c authfile.c channels.c cleanup.c clientloop.c groupaccess.c]
[includes.h log.c misc.c msg.c packet.c progressmeter.c readconf.c]
[readpass.c scp.c servconf.c sftp-client.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c]
[sshconnect.c sshlogin.c sshpty.c uidswap.c]
move #include <unistd.h> out of includes.h
|
|
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c
sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c
includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c
sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c
ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c]
move #include <errno.h> out of includes.h; ok markus@
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c]
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c]
[auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c]
[buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c]
[cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c]
[deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c]
[kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c]
[readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c]
[sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c]
Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that
Theo nuked - our scripts to sync -portable need them in the files
|
|
[clientloop.c progressmeter.c serverloop.c sshd.c]
ARGSUSED for signal handlers
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c]
[auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c]
[auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c]
[auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c]
[canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c]
[groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c]
[kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c]
[loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c]
[nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c]
[scard.c scp.c servconf.c serverloop.c session.c sftp-client.c]
[sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c]
[openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c]
[openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c]
[openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c]
[openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c]
RCSID() can die
|
|
- stevesk@cvs.openbsd.org 2006/02/20 17:02:44
[clientloop.c includes.h monitor.c progressmeter.c scp.c]
[serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c]
move #include <signal.h> out of includes.h; ok markus@
the previous was:
- stevesk@cvs.openbsd.org 2006/02/20 17:19:54
[auth-rhosts.c auth-rsa.c auth.c auth2-none.c auth2-pubkey.c]
[authfile.c clientloop.c includes.h readconf.c scp.c session.c]
[sftp-client.c sftp-common.c sftp-common.h sftp-glob.c]
[sftp-server.c sftp.c ssh-add.c ssh-keygen.c ssh.c sshconnect.c]
[sshconnect2.c sshd.c sshpty.c]
move #include <sys/stat.h> out of includes.h; ok markus@
|
|
[channels.c clientloop.c includes.h misc.c progressmeter.c sftp.c]
[ssh.c sshd.c sshpty.c]
move #include <sys/ioctl.h> out of includes.h; ok markus@
|
|
snprintf formats, fixes warnings on some 64 bit platforms. Patch from
shaw at vranix.com, ok djm@
|
|
- jaredy@cvs.openbsd.org 2005/06/07 13:25:23
[progressmeter.c]
catch SIGWINCH and resize progress meter accordingly; ok markus dtucker
|
|
[progressmeter.c ssh-keyscan.c]
add snprintf checks. ok djm@ markus@
|
|
[channels.c cipher.c clientloop.c clientloop.h compat.h moduli.c
readconf.c nchan.c pathnames.h progressmeter.c readconf.h servconf.c
session.c sftp-client.c sftp.c ssh-agent.1 ssh-keygen.c ssh.c ssh1.h
sshd.c ttymodes.h]
spaces
|
|
[auth-rsa.c auth2-gss.c auth2-pubkey.c authfile.c canohost.c channels.c
cipher.c dns.c kex.c monitor.c monitor_fdpass.c monitor_wrap.c
monitor_wrap.h nchan.c packet.c progressmeter.c scp.c sftp-server.c sftp.c
ssh-gss.h ssh-keygen.c ssh.c sshconnect.c sshconnect1.c sshlogin.c
sshpty.c]
make ssh -Wshadow clean, no functional changes
markus@ ok
There are also some portable-specific -Wshadow warnings to be fixed in
monitor.c and montior_wrap.c.
|
|
[auth.c auth2-none.c authfile.c channels.c monitor.c monitor_mm.c
packet.c packet.h progressmeter.c session.c openbsd-compat/xmmap.c]
improve some code lint did not like; djm millert ok
|
|
[progressmeter.c]
fix ETA for > 4GB; bugzilla #791; ok henning@ deraadt@
|
|
[progressmeter.c]
improvments from andreas@:
* saner speed estimate for transfers that takes less than a second by
rounding the time to 1 second.
* when the transfer is finished calculate the actual total speed
rather than the current speed which is given during the transfer
|
|
- markus@cvs.openbsd.org 2003/11/20 11:39:28
[progressmeter.c]
fix rounding errors; from andreas@
|
|
[progressmeter.c]
don't print trailing \0; bug #709; Robert.Dahlem@siemens.com
ok millert/deraadt@
|
|
[progressmeter.c]
do write to buf[-1]
|
|
[progressmeter.c]
pass file_size + 1 to snprintf: fixes printing of truncated
file names; fix based on patch/report from sturm@;
|
|
openbsd-compat/bsd-misc.c, s/mysignal/signal/ and #define signal to
be our 'mysignal' by default. OK djm@
|
|
[LICENCE progressmeter.c]
replace 4 clause BSD licensed progressmeter code with a replacement
from Nils Nordman and myself; ok deraadt@
(copied from OpenBSD an re-applied portable changes)
|
|
[atomicio.c atomicio.h authfd.c clientloop.c monitor_wrap.c msg.c
progressmeter.c scp.c sftp-client.c ssh-keyscan.c ssh.h sshconnect.c
sshd.c]
deal with typing of write vs read in atomicio
|
|
[packet.c progressmeter.c]
mostly ansi cleanup; pval ok
|
|
|
|
hacked code.
|
|
[progressmeter.c]
The UCB copyright here is incorrect. This code did not originate
at UCB, it was written by Luke Mewburn. Updated the copyright at
the author's request. markus@ OK
|
|
[progressmeter.c]
$OpenBSD$
- itojun@cvs.openbsd.org 2003/04/03 10:17:35
[progressmeter.c]
remove $OpenBSD$, as other *.c does not have it.
|
|
- markus@cvs.openbsd.org 2003/03/17 10:38:38
[progressmeter.c]
don't print \n if backgrounded; from ho@
|
|
|
|
|
|
[progressmeter.c]
allow WARNINGS=yes; ok djm@
|
|
[scp.c sftp.1 sftp.c sftp-client.c sftp-int.c progressmeter.c]
[progressmeter.h]
sftp progress meter support.
original diffs by Nils Nordman <nino at nforced dot com> via
markus@, merged to -current by me, djm@ ok.
|