| Age | Commit message (Collapse) | Author |
|---|
|
ssh: Enable ForwardX11Trusted, returning to earlier semantics which cause
fewer problems with existing setups (http://bugs.debian.org/237021).
ssh: Set 'SendEnv LANG LC_*' by default (http://bugs.debian.org/264024).
ssh: Enable HashKnownHosts by default to try to limit the spread of ssh
worms.
ssh: Enable GSSAPIAuthentication by default.
sshd: Enable PAM, disable ChallengeResponseAuthentication, and disable
PrintMotd.
sshd: Enable X11Forwarding.
sshd: Set 'AcceptEnv LANG LC_*' by default.
sshd: Change sftp subsystem path to /usr/lib/openssh/sftp-server.
Document all of this.
Author: Russ Allbery <rra@debian.org>
Forwarded: not-needed
Last-Update: 2017-10-04
Patch-Name: debian-config.patch
|
|
Allow secure files (~/.ssh/config, ~/.ssh/authorized_keys, etc.) to be
group-writable, provided that the group in question contains only the file's
owner. Rejected upstream for IMO incorrect reasons (e.g. a misunderstanding
about the contents of gr->gr_mem). Given that per-user groups and umask 002
are the default setup in Debian (for good reasons - this makes operating in
setgid directories with other groups much easier), we need to permit this by
default.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1060
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=314347
Last-Update: 2017-10-04
Patch-Name: user-group-modes.patch
|
|
Add compatibility aliases for ProtocolKeepAlives and SetupTimeOut, supported
in previous versions of Debian's OpenSSH package but since superseded by
ServerAliveInterval. (We're probably stuck with this bit for
compatibility.)
In batch mode, default ServerAliveInterval to five minutes.
Adjust documentation to match and to give some more advice on use of
keepalives.
Author: Ian Jackson <ian@chiark.greenend.org.uk>
Author: Matthew Vernon <matthew@debian.org>
Author: Colin Watson <cjwatson@debian.org>
Last-Update: 2018-10-19
Patch-Name: keepalive-extensions.patch
|
|
These options were used as part of Debian's response to CVE-2008-0166.
Nearly six years later, we no longer need to continue carrying the bulk
of that patch, but we do need to avoid failing when the associated
configuration options are still present.
Last-Update: 2014-02-09
Patch-Name: ssh-vulnkey-compat.patch
|
|
This patch has been rejected upstream: "None of the OpenSSH developers are
in favour of adding this, and this situation has not changed for several
years. This is not a slight on Simon's patch, which is of fine quality, but
just that a) we don't trust GSSAPI implementations that much and b) we don't
like adding new KEX since they are pre-auth attack surface. This one is
particularly scary, since it requires hooks out to typically root-owned
system resources."
However, quite a lot of people rely on this in Debian, and it's better to
have it merged into the main openssh package rather than having separate
-krb5 packages (as we used to have). It seems to have a generally good
security history.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242
Last-Updated: 2018-10-20
Patch-Name: gssapi.patch
|
|
* Try to resolve a port specification with getservbyname(3) if a
numeric conversion fails.
* Make the "Port" option in ssh_config handle its argument as a
port rather than a plain integer.
ok dtucker@ deraadt@
OpenBSD-Commit-ID: e7f03633133205ab3dfbc67f9df7475fabae660d
|
|
environment variable names as well as explicit paths. ok dtucker@
OpenBSD-Commit-ID: 2f0996e103876c53d8c9dd51dcce9889d700767b
|
|
it to specify which signature algorithms may be used by CAs when signing
certificates. Useful if you want to ban RSA/SHA1; ok markus@
OpenBSD-Commit-ID: 9159e5e9f67504829bf53ff222057307a6e3230f
|
|
deraadt@ markus@
OpenBSD-Commit-ID: 5a557e74b839daf13cc105924d2af06a1560faee
|
|
Most people will 1) be using modern multi-factor authentication methods
like TOTP/OATH etc and 2) be getting support for multi-factor
authentication via PAM or BSD Auth.
|
|
original_real_uid and original_effective_uid globals and replace with calls
to plain getuid(). ok djm@
OpenBSD-Commit-ID: 92561c0cd418d34e6841e20ba09160583e27b68c
|
|
cannot be setuid and sshd always has privsep on, we can remove the uid checks
for low port binds and just let the system do the check. We leave a sanity
check for the !privsep case so long as the code is stil there. with & ok
djm@
OpenBSD-Commit-ID: 9535cfdbd1cd54486fdbedfaee44ce4367ec7ca0
|
|
ssh(1) setuid has been removed, remove supporting code and clean up
references to it in the man pages
We have not shipped ssh(1) the setuid bit since 2002. If ayone
really needs to make connections from a low port number this can
be implemented via a small setuid ProxyCommand.
ok markus@ jmc@ djm@
OpenBSD-Commit-ID: d03364610b7123ae4c6792f5274bd147b6de717e
|
|
attempted. Do not link uidwap.c into ssh any more. Neuters
UsePrivilegedPort, which will be marked as deprecated shortly. ok markus@
djm@
OpenBSD-Commit-ID: c4ba5bf9c096f57a6ed15b713a1d7e9e2e373c42
|
|
signature work - returns ability to add/remove/specify algorithms by
wildcard.
Algorithm lists are now fully expanded when the server/client configs
are finalised, so errors are reported early and the config dumps
(e.g. "ssh -G ...") now list the actual algorithms selected.
Clarify that, while wildcards are accepted in algorithm lists, they
aren't full pattern-lists that support negation.
(lots of) feedback, ok markus@
OpenBSD-Commit-ID: a8894c5c81f399a002f02ff4fe6b4fa46b1f3207
|
|
OpenBSD-Commit-ID: fc808daced813242563b80976e1478de95940056
|
|
environment variables for the remote session (subject to the server accepting
them)
refactor SendEnv to remove the arbitrary limit of variable names.
ok markus@
OpenBSD-Commit-ID: cfbb00d9b0e10c1ffff1d83424351fd961d1f2be
|
|
static limits noted by gerhard@; ok dtucker@, djm@
OpenBSD-Commit-ID: 6d702eabef0fa12e5a1d75c334a8c8b325298b5c
|
|
username is available currently. In the client this is via %i, in the server
%U (since %i was already used in the client in some places for this, but used
for something different in the server); bz#2870, ok dtucker@
OpenBSD-Commit-ID: c7e912b0213713316cb55db194b3a6415b3d4b95
|
|
functionality; bz#2869 ok dtucker@
OpenBSD-Commit-ID: 1c06ee08eb78451b5837fcfd8cbebc5ff3a67a01
|
|
previously labeled for sendind. bz#1285 ok dtucker@
OpenBSD-Commit-ID: f6fec9e3d0f366f15903094fbe1754cb359a0df9
|
|
from Jakub Jelen via bz2835
OpenBSD-Commit-ID: 5970adadf6ef206bee0dddfc75d24c2019861446
|
|
interactive and CS1 for bulk
AF21 was selected as this is the highest priority within the low-latency
service class (and it is higher than what we have today). SSH is elastic
and time-sensitive data, where a user is waiting for a response via the
network in order to continue with a task at hand. As such, these flows
should be considered foreground traffic, with delays or drops to such
traffic directly impacting user-productivity.
For bulk SSH traffic, the CS1 "Lower Effort" marker was chosen to enable
networks implementing a scavanger/lower-than-best effort class to
discriminate scp(1) below normal activities, such as web surfing. In
general this type of bulk SSH traffic is a background activity.
An advantage of using "AF21" for interactive SSH and "CS1" for bulk SSH
is that they are recognisable values on all common platforms (IANA
https://www.iana.org/assignments/dscp-registry/dscp-registry.xml), and
for AF21 specifically a definition of the intended behavior exists
https://tools.ietf.org/html/rfc4594#section-4.7 in addition to the definition
of the Assured Forwarding PHB group https://tools.ietf.org/html/rfc2597, and
for CS1 (Lower Effort) there is https://tools.ietf.org/html/rfc3662
The first three bits of "AF21" map to the equivalent IEEEE 802.1D PCP, IEEE
802.11e, MPLS EXP/CoS and IP Precedence value of 2 (also known as "Immediate",
or "AC_BE"), and CS1's first 3 bits map to IEEEE 802.1D PCP, IEEE 802.11e,
MPLS/CoS and IP Precedence value 1 ("Background" or "AC_BK").
OK deraadt@, "no objection" djm@
OpenBSD-Commit-ID: d11d2a4484f461524ef0c20870523dfcdeb52181
|
|
Hash-Based Signatures) The code is not compiled in by default (see WITH_XMSS
in Makefile.inc) Joint work with stefan-lukas_gazdag at genua.eu See
https://tools.ietf.org/html/draft-irtf-cfrg-xmss-hash-based-signatures-12 ok
djm@
OpenBSD-Commit-ID: ef3eccb96762a5d6f135d7daeef608df7776a7ac
|
|
command-line argument to ssh(1) that directs it to bind its outgoing
connection to the address of the specified network interface.
BindInterface prefers to use addresses that aren't loopback or link-
local, but will fall back to those if no other addresses of the
required family are available on that interface.
Based on patch by Mike Manning in bz#2820, ok dtucker@
OpenBSD-Commit-ID: c5064d285c2851f773dd736a2c342aa384fbf713
|
|
Replace atoi and strtol conversions for integer arguments
to config keywords with a checking wrapper around strtonum. This will
prevent and flag invalid and negative arguments to these keywords. ok djm@
OpenBSD-Commit-ID: 99ae3981f3d608a219ccb8d2fff635ae52c17998
|
|
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
|
|
Add 'reverse' dynamic forwarding which combines dynamic
forwarding (-D) with remote forwarding (-R) where the remote-forwarded port
expects SOCKS-requests.
The SSH server code is unchanged and the parsing happens at the SSH
clients side. Thus the full SOCKS-request is sent over the forwarded
channel and the client parses c->output. Parsing happens in
channel_before_prepare_select(), _before_ the select bitmask is
computed in the pre[] handlers, but after network input processing
in the post[] handlers.
help and ok djm@
Upstream-ID: aa25a6a3851064f34fe719e0bf15656ad5a64b89
|
|
Expand ssh_config's StrictModes option with two new
settings:
StrictModes=accept-new will automatically accept hitherto-unseen keys
but will refuse connections for changed or invalid hostkeys.
StrictModes=off is the same as StrictModes=no
Motivation:
StrictModes=no combines two behaviours for host key processing:
automatically learning new hostkeys and continuing to connect to hosts
with invalid/changed hostkeys. The latter behaviour is quite dangerous
since it removes most of the protections the SSH protocol is supposed to
provide.
Quite a few users want to automatically learn hostkeys however, so
this makes that feature available with less danger.
At some point in the future, StrictModes=no will change to be a synonym
for accept-new, with its current behaviour remaining available via
StrictModes=off.
bz#2400, suggested by Michael Samuel; ok markus
Upstream-ID: 0f55502bf75fc93a74fb9853264a8276b9680b64
|
|
Add RemoteCommand option to specify a command in the
ssh config file instead of giving it on the client's command line. This
command will be executed on the remote host. The feature allows to automate
tasks using ssh config. OK markus@
Upstream-ID: 5d982fc17adea373a9c68cae1021ce0a0904a5ee
|
|
there's no reason to artificially limit the key path
here, just check that it fits PATH_MAX; spotted by Matthew Patton
Upstream-ID: 858addaf2009c9cf04d80164a41b2088edb30b58
|
|
remove SSHv1 configuration options and man pages bits
ok markus@
Upstream-ID: 84638c23546c056727b7a7d653c72574e0f19424
|
|
remove SSHv1 ciphers; ok markus@
Upstream-ID: e5ebc5e540d7f23a8c1266db1839794d4d177890
|
|
remove options.protocol and client Protocol
configuration knob
ok markus@
Upstream-ID: 5a967f5d06e2d004b0235457b6de3a9a314e9366
|
|
unifdef WITH_SSH1 ok markus@
Upstream-ID: 9716e62a883ef8826c57f4d33b4a81a9cc7755c7
|
|
Add SyslogFacility option to ssh(1) matching the
equivalent option in sshd(8). bz#2705, patch from erahn at arista.com, ok
djm@
Upstream-ID: d5115c2c0193ceb056ed857813b2a7222abda9ed
|
|
better match sshd config parser behaviour: fatal() if
line is overlong, increase line buffer to match sshd's; bz#2651 reported by
Don Fong; ok dtucker@
Upstream-ID: b175ae7e0ba403833f1ee566edf10f67443ccd18
|
|
Plug mem leak on GLOB_NOMATCH case. From jjelen at
redhat.com via bz#2687, ok djm@
Upstream-ID: 8016a7ae97719d3aa55fb723fc2ad3200058340d
|
|
support =- for removing methods from algorithms lists,
e.g. Ciphers=-*cbc; suggested by Cristian Ionescu-Idbohrn in bz#2671 "I like
it" markus@
Upstream-ID: c78c38f9f81a963b33d0eade559f6048add24a6d
|
|
allow form-feed characters at EOL; bz#2431 ok dtucker@
Upstream-ID: 1f453afaba6da2ae69d6afdf1ae79a917552f1a2
|
|
small cleanup post SSHv1 removal:
remove SSHv1-isms in commented examples
reorder token table to group deprecated and compile-time conditional tokens
better
fix config dumping code for some compile-time conditional options that
weren't being correctly skipped (SSHv1 and PKCS#11)
Upstream-ID: f2e96b3cb3158d857c5a91ad2e15925df3060105
|
|
some explicit NULL tests when dumping configured
forwardings; from Karsten Weiss
Upstream-ID: 40957b8dea69672b0e50df6b4a91a94e3e37f72d
|
|
fix previous
Upstream-ID: c107d6a69bc22325d79fbf78a2a62e04bcac6895
|
|
show a useful error message when included config files
can't be opened; bz#2653, ok dtucker@
Upstream-ID: f598b73b5dfe497344cec9efc9386b4e5a3cb95b
|
|
Fix logic in add_local_forward() that inverted a test
when code was refactored out into bind_permitted(). This broke ssh port
forwarding for non-priv ports as a non root user.
ok dtucker@ 'looks good' deraadt@
Upstream-ID: ddb8156ca03cc99997de284ce7777536ff9570c9
|
|
Factor out "can bind to low ports" check into its own function. This will
make it easier for Portable to support platforms with permissions models
other than uid==0 (eg bz#2625). ok djm@, "doesn't offend me too much"
deraadt@.
Upstream-ID: 86213df4183e92b8f189a6d2dac858c994bfface
|
|
remove superfluous NOTREACHED comment
Upstream-ID: a7485c1f1be618e8c9e38fd9be46c13b2d03b90c
|
|
reverse the order in which -J/JumpHost proxies are visited to
be more intuitive and document
reported by and manpage bits naddy@
Upstream-ID: 3a68fd6a841fd6cf8cedf6552a9607ba99df179a
|
|
Do not clobber the global jump_host variables when
parsing an inactive configuration. ok djm@
Upstream-ID: 5362210944d91417d5976346d41ac0b244350d31
|
|
Add a ProxyJump ssh_config(5) option and corresponding -J
ssh(1) command-line flag to allow simplified indirection through a SSH
bastion or "jump host".
These options construct a proxy command that connects to the
specified jump host(s) (more than one may be specified) and uses
port-forwarding to establish a connection to the next destination.
This codifies the safest way of indirecting connections through SSH
servers and makes it easy to use.
ok markus@
Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
|
