summaryrefslogtreecommitdiff
path: root/readconf.c
AgeCommit message (Collapse)Author
2015-01-16upstream commitderaadt@openbsd.org
Replace <sys/param.h> with <limits.h> and other less dirty headers where possible. Annotate <sys/param.h> lines with their current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1, LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution. These are the files confirmed through binary verification. ok guenther, millert, doug (helped with the verification protocol)
2015-01-15upstream commitdjm@openbsd.org
sync ssh-keysign, ssh-keygen and some dependencies to the new buffer/key API; mostly mechanical, ok markus@
2015-01-13upstream commitdjm@openbsd.org
add sshd_config HostbasedAcceptedKeyTypes and PubkeyAcceptedKeyTypes options to allow sshd to control what public key types will be accepted. Currently defaults to all. Feedback & ok markus@
2015-01-09upstream commitdjm@openbsd.org
fix ssh_config FingerprintHash evaluation order; from Petr Lautrbach
2014-12-22upstream commitdjm@openbsd.org
Add FingerprintHash option to control algorithm used for key fingerprints. Default changes from MD5 to SHA256 and format from hex to base64. Feedback and ok naddy@ markus@
2014-12-05upstream commitdjm@openbsd.org
add RevokedHostKeys option for the client Allow textfile or KRL-based revocation of hostkeys.
2014-10-27upstream commitlteo@openbsd.org
Remove unnecessary include: netinet/in_systm.h is not needed by these programs. NB. skipped for portable ok deraadt@ millert@
2014-10-13upstream commitdjm@openbsd.org
Tweak config reparsing with host canonicalisation Make the second pass through the config files always run when hostname canonicalisation is enabled. Add a "Match canonical" criteria that allows ssh_config Match blocks to trigger only in the second config pass. Add a -G option to ssh that causes it to parse its configuration and dump the result to stdout, similar to "sshd -T" Allow ssh_config Port options set in the second config parse phase to be applied (they were being ignored). bz#2267 bz#2286; ok markus
2014-07-18 - millert@cvs.openbsd.org 2014/07/15 15:54:14Damien Miller
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c] [auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h] [clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c] [readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c] [ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c] [sshd_config.5 sshlogin.c] Add support for Unix domain socket forwarding. A remote TCP port may be forwarded to a local Unix domain socket and vice versa or both ends may be a Unix domain socket. This is a reimplementation of the streamlocal patches by William Ahern from: http://www.25thandclement.com/~william/projects/streamlocal.html OK djm@ markus@
2014-05-15 - djm@cvs.openbsd.org 2014/04/23 12:42:34Damien Miller
[readconf.c] don't record duplicate IdentityFiles
2014-02-24 - djm@cvs.openbsd.org 2014/02/23 20:11:36Damien Miller
[readconf.c readconf.h ssh.c ssh_config.5] reparse ssh_config and ~/.ssh/config if hostname canonicalisation changes the hostname. This allows users to write configurations that always refer to canonical hostnames, e.g. CanonicalizeHostname yes CanonicalDomains int.example.org example.org CanonicalizeFallbackLocal no Host *.int.example.org Compression off Host *.example.org User djm ok markus@
2014-02-24 - djm@cvs.openbsd.org 2014/02/22 01:32:19Damien Miller
[readconf.c] when processing Match blocks, skip 'exec' clauses if previous predicates failed to match; ok markus@
2014-02-04 - djm@cvs.openbsd.org 2014/01/29 06:18:35Damien Miller
[Makefile.in auth.h auth2-jpake.c auth2.c jpake.c jpake.h monitor.c] [monitor.h monitor_wrap.c monitor_wrap.h readconf.c readconf.h] [schnorr.c schnorr.h servconf.c servconf.h ssh2.h sshconnect2.c] remove experimental, never-enabled JPAKE code; ok markus@
2014-01-31 - (dtucker) [readconf.c] Include <arpa/inet.h> for the hton macros. FixesDarren Tucker
build with HP-UX's compiler. Patch from Kevin Brott.
2014-01-18 - (dtucker) [readconf.c] Wrap paths.h inside an ifdef. Allows building onDarren Tucker
Solaris.
2013-12-07 - markus@cvs.openbsd.org 2013/12/06 13:39:49Damien Miller
[authfd.c authfile.c key.c key.h myproposal.h pathnames.h readconf.c] [servconf.c ssh-agent.c ssh-keygen.c ssh-keyscan.1 ssh-keyscan.c] [ssh-keysign.c ssh.c ssh_config.5 sshd.8 sshd.c verify.c ssh-ed25519.c] [sc25519.h sc25519.c hash.c ge25519_base.data ge25519.h ge25519.c] [fe25519.h fe25519.c ed25519.c crypto_api.h blocks.c] support ed25519 keys (hostkeys and user identities) using the public domain ed25519 reference code from SUPERCOP, see http://ed25519.cr.yp.to/software.html feedback, help & ok djm@
2013-11-21 - deraadt@cvs.openbsd.org 2013/11/20 20:54:10Damien Miller
[canohost.c clientloop.c match.c readconf.c sftp.c] unsigned casts for ctype macros where neccessary ok guenther millert markus
2013-10-24 - dtucker@cvs.openbsd.org 2013/10/24 00:51:48Damien Miller
[readconf.c servconf.c ssh_config.5 sshd_config.5] Disallow empty Match statements and add "Match all" which matches everything. ok djm, man page help jmc@
2013-10-23 - djm@cvs.openbsd.org 2013/10/23 03:05:19Damien Miller
[readconf.c ssh.c] comment
2013-10-23 - djm@cvs.openbsd.org 2013/10/23 03:03:07Damien Miller
[readconf.c] Hostname may have %h sequences that should be expanded prior to Match evaluation; spotted by Iain Morgan
2013-10-23 - djm@cvs.openbsd.org 2013/10/20 06:19:28Damien Miller
[readconf.c ssh_config.5] rename "command" subclause of the recently-added "Match" keyword to "exec"; it's shorter, clearer in intent and we might want to add the ability to match against the command being executed at the remote end in the future.
2013-10-17 - djm@cvs.openbsd.org 2013/10/16 22:49:39Damien Miller
[readconf.c readconf.h ssh.1 ssh.c ssh_config.5] s/canonicalise/canonicalize/ for consistency with existing spelling, e.g. authorized_keys; pointed out by naddy@
2013-10-17 - djm@cvs.openbsd.org 2013/10/16 02:31:47Damien Miller
[readconf.c readconf.h roaming_client.c ssh.1 ssh.c ssh_config.5] [sshconnect.c sshconnect.h] Implement client-side hostname canonicalisation to allow an explicit search path of domain suffixes to use to convert unqualified host names to fully-qualified ones for host key matching. This is particularly useful for host certificates, which would otherwise need to list unqualified names alongside fully-qualified ones (and this causes a number of problems). "looks fine" markus@
2013-10-15 - djm@cvs.openbsd.org 2013/10/14 23:28:23Damien Miller
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c] refactor client config code a little: add multistate option partsing to readconf.c, similar to servconf.c's existing code. move checking of options that accept "none" as an argument to readconf.c add a lowercase() function and use it instead of explicit tolower() in loops part of a larger diff that was ok markus@
2013-10-15 - djm@cvs.openbsd.org 2013/10/14 22:22:05Damien Miller
[readconf.c readconf.h ssh-keysign.c ssh.c ssh_config.5] add a "Match" keyword to ssh_config that allows matching on hostname, user and result of arbitrary commands. "nice work" markus@
2013-08-21 - djm@cvs.openbsd.org 2013/08/20 00:11:38Damien Miller
[readconf.c readconf.h ssh_config.5 sshconnect.c] Add a ssh_config ProxyUseFDPass option that supports the use of ProxyCommands that establish a connection and then pass a connected file descriptor back to ssh(1). This allows the ProxyCommand to exit rather than have to shuffle data back and forth and enables ssh to use getpeername, etc. to obtain address information just like it does with regular directly-connected sockets. ok markus@
2013-07-18 - dtucker@cvs.openbsd.org 2013/06/10 19:19:44Damien Miller
[readconf.c] revert 1.203 while we investigate crashes reported by okan@
2013-06-06 - dtucker@cvs.openbsd.org 2013/06/05 22:00:28Darren Tucker
[readconf.c] plug another memleak. bz#1967, from Zhenbo Xu, detected by Melton, ok djm
2013-06-02 - djm@cvs.openbsd.org 2013/05/17 00:13:13Darren Tucker
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c dns.c packet.c readpass.c authfd.c moduli.c] bye, bye xfree(); ok markus@
2013-05-16 - dtucker@cvs.openbsd.org 2013/05/16 10:43:34Darren Tucker
[servconf.c readconf.c] remove now-unused variables
2013-05-16 - (dtucker) [configure.ac readconf.c servconf.cDarren Tucker
openbsd-compat/openbsd-compat.h] Add compat bits for scan_scaled.
2013-05-16 - dtucker@cvs.openbsd.org 2013/05/16 09:12:31Darren Tucker
[readconf.c servconf.c] switch RekeyLimit traffic volume parsing to scan_scaled. ok djm@
2013-05-16 - djm@cvs.openbsd.org 2013/05/16 04:27:50Darren Tucker
[ssh_config.5 readconf.h readconf.c] add the ability to ignore specific unrecognised ssh_config options; bz#866; ok markus@
2013-05-16 - dtucker@cvs.openbsd.org 2013/05/16 02:00:34Darren Tucker
[ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c ssh_config.5 packet.h] Add an optional second argument to RekeyLimit in the client to allow rekeying based on elapsed time in addition to amount of traffic. with djm@ jmc@, ok djm
2013-04-23 - djm@cvs.openbsd.org 2013/03/06 23:36:53Damien Miller
[readconf.c] g/c unused variable (-Wunused)
2013-04-05 - dtucker@cvs.openbsd.org 2013/02/22 04:45:09Darren Tucker
[ssh.c readconf.c readconf.h] Don't complain if IdentityFiles specified in system-wide configs are missing. ok djm, deraadt
2013-04-05 - dtucker@cvs.openbsd.org 2013/02/17 23:16:57Darren Tucker
[readconf.c ssh.c readconf.h sshconnect2.c] Keep track of which IndentityFile options were manually supplied and which were default options, and don't warn if the latter are missing. ok markus@
2011-10-02 - markus@cvs.openbsd.org 2011/09/23 07:45:05Darren Tucker
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h] unbreak remote portforwarding with dynamic allocated listen ports: 1) send the actual listen port in the open message (instead of 0). this allows multiple forwardings with a dynamic listen port 2) update the matching permit-open entry, so we can identify where to connect to report: den at skbkontur.ru and P. Szczygielski feedback and ok djm@
2011-05-29 - djm@cvs.openbsd.org 2011/05/24 07:15:47Damien Miller
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c] Remove undocumented legacy options UserKnownHostsFile2 and GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile accept multiple paths per line and making their defaults include known_hosts2; ok markus
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:34:32Damien Miller
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5] Add a RequestTTY ssh_config option to allow configuration-based control over tty allocation (like -t/-T); ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:31:38Damien Miller
[readconf.c ssh_config.5] support negated Host matching, e.g. Host *.example.org !c.example.org User mekmitasdigoat Will match "a.example.org", "b.example.org", but not "c.example.org" ok markus@
2010-11-20 - djm@cvs.openbsd.org 2010/11/13 23:27:51Damien Miller
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h] [servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5] allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of hardcoding lowdelay/throughput. bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
2010-09-24 - djm@cvs.openbsd.org 2010/09/22 05:01:30Damien Miller
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h] [servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5] add a KexAlgorithms knob to the client and server configuration to allow selection of which key exchange methods are used by ssh(1) and sshd(8) and their order of preference. ok markus@
2010-09-10 - (djm) [authfd.c authfile.c bufec.c buffer.h configure.ac kex.h kexecdh.c]Damien Miller
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c] [ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on platforms that don't have the requisite OpenSSL support. ok dtucker@
2010-08-31 - djm@cvs.openbsd.org 2010/08/31 11:54:45Damien Miller
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c] [authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c] [monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c] [ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c] [ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h] [ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5] [uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c] Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. Only the mandatory sections of RFC5656 are implemented, specifically the three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and ECDSA. Point compression (optional in RFC5656 is NOT implemented). Certificate host and user keys using the new ECDSA key types are supported. Note that this code has not been tested for interoperability and may be subject to change. feedback and ok markus@
2010-08-03 - djm@cvs.openbsd.org 2010/07/19 09:15:12Damien Miller
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5] add a "ControlPersist" option that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but further hacked on by wmertens AT cisco.com, apb AT cequrux.com, martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 23:10:30Damien Miller
[ssh.c] log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts; "nice!" markus@
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 07:14:46Damien Miller
[channels.c mux.c readconf.c readconf.h ssh.h] bz#1327: remove hardcoded limit of 100 permitopen clauses and port forwards per direction; ok markus@ stevesk@
2010-05-21 - markus@cvs.openbsd.org 2010/05/16 12:55:51Damien Miller
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c] mux support for remote forwarding with dynamic port allocation, use with LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost` feedback and ok djm@
2010-02-12 - markus@cvs.openbsd.org 2010/02/08 10:50:20Damien Miller
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c] [ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5] replace our obsolete smartcard code with PKCS#11. ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11 provider (shared library) while ssh-agent(1) delegates PKCS#11 to a forked a ssh-pkcs11-helper process. PKCS#11 is currently a compile time option. feedback and ok djm@; inspired by patches from Alon Bar-Lev `
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-07 07:45:02 +0000