Age | Commit message (Collapse) | Author |
|
[canohost.c clientloop.c includes.h match.c readconf.c scp.c ssh.c]
[sshconnect.c]
move #include <ctype.h> out of includes.h; ok djm@
|
|
[clientloop.c includes.h monitor.c progressmeter.c scp.c]
[serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c]
move #include <signal.h> out of includes.h; ok markus@
|
|
[readconf.c]
raise error when the user specifies a RekeyLimit that is smaller than 16
(the smallest of our cipher's blocksize) or big enough to cause integer
wraparound; ok & feedback dtucker@
|
|
[auth-options.c includes.h misc.c misc.h readconf.c servconf.c]
[serverloop.c ssh.c ssh_config.5 sshd_config.5 configure.ac]
two changes to the new ssh tunnel support. this breaks compatibility
with the initial commit but is required for a portable approach.
- make the tunnel id u_int and platform friendly, use predefined types.
- support configuration of layer 2 (ethernet) or layer 3
(point-to-point, default) modes. configuration is done using the
Tunnel (yes|point-to-point|ethernet|no) option is ssh_config(5) and
restricted by the PermitTunnel (yes|point-to-point|ethernet|no) option
in sshd_config(5).
ok djm@, man page bits by jmc@
|
|
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
|
|
[readconf.c]
listen_hosts initialisation here too; spotted greg AT y2005.nest.cx
|
|
[auth-rh-rsa.c auth-rhosts.c auth2-chall.c auth2-gss.c channels.c]
[cipher-ctr.c gss-genr.c gss-serv.c kex.c moduli.c readconf.c]
[serverloop.c session.c sftp-client.c sftp.c ssh-add.c ssh-keygen.c]
[sshconnect.c sshconnect2.c]
knf says that a 2nd level indent is four (not three or five) spaces
|
|
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add ControlMaster=auto/autoask options to support opportunistic
multiplexing; tested avsm@ and jakob@, ok markus@
|
|
[readconf.c servconf.c]
check return value from strdelim() for NULL (AddressFamily); mpech
|
|
[misc.c ssh-keygen.c servconf.c clientloop.c auth-options.c ssh-add.c
monitor.c sftp-client.c bufaux.h hostfile.c ssh.c sshconnect.c channels.c
readconf.c bufaux.c sftp.c]
spacing
|
|
[readconf.c]
Check listen addresses for null, prevents xfree from dying during
ClearAllForwardings (bz #996). From Craig Leres, ok markus@
|
|
[readconf.c]
fix SendEnv config parsing bug found by Roumen Petrov; ok dtucker@
|
|
[hostfile.c hostfile.h readconf.c readconf.h ssh.1 ssh_config.5]
[sshconnect.c sshd.8]
add support for hashing host names and addresses added to known_hosts
files, to improve privacy of which hosts user have been visiting; ok
markus@ deraadt@
|
|
[auth-options.c channels.c channels.h clientloop.c compat.c compat.h]
[misc.c misc.h readconf.c readconf.h servconf.c ssh.1 ssh.c ssh_config.5]
[sshd_config.5]
bz#413: allow optional specification of bind address for port forwardings.
Patch originally by Dan Astorian, but worked on by several people
Adds GatewayPorts=clientspecified option on server to allow remote
forwards to bind to client-specified ports.
|
|
[channels.c cipher.c clientloop.c clientloop.h compat.h moduli.c
readconf.c nchan.c pathnames.h progressmeter.c readconf.h servconf.c
session.c sftp-client.c sftp.c ssh-agent.1 ssh-keygen.c ssh.c ssh1.h
sshd.c ttymodes.h]
spaces
|
|
[clientloop.c misc.h readconf.c readpass.c ssh.c ssh_config.5]
Add option for confirmation (ControlMaster=ask) via ssh-askpass before
opening shared connections; ok markus@
|
|
[channels.c channels.h clientloop.c clientloop.h includes.h readconf.c]
[readconf.h scp.1 sftp.1 ssh.1 ssh.c ssh_config.5]
implement session multiplexing in the client (the server has supported
this since 2.0); ok markus@
|
|
[readconf.c]
Kill dead code after fatal(); ok djm@
|
|
[readconf.c readconf.h servconf.c servconf.h session.c session.h ssh.c
ssh_config.5 sshd_config.5]
bz #815: implement ability to pass specified environment variables from
the client to the server; ok markus@
|
|
[readconf.c readconf.h ssh-keysign.c ssh.c]
perform strict ownership and modes checks for ~/.ssh/config files,
as these can be used to execute arbitrary programs; ok markus@
NB. ssh will now exit when it detects a config with poor permissions
|
|
[readconf.c readconf.h scp.1 sftp.1 ssh.1 ssh_config.5 sshconnect2.c]
add IdentitiesOnly; ok djm@, pb@
|
|
[clientloop.c clientloop.h readconf.c readconf.h scp.1 sftp.1 ssh.1]
[ssh.c ssh_config.5]
application layer keep alive (ServerAliveInterval ServerAliveCountMax)
for ssh(1), similar to the sshd(8) option; ok beck@; with help from
jmc and dtucker@
|
|
[readconf.c readconf.h scp.1 servconf.c servconf.h sftp.1 ssh.1]
[ssh_config.5 sshconnect.c sshd.c sshd_config.5]
rename keepalive to tcpkeepalive; the old name causes too much
confusion; ok djm, dtucker; with help from jmc@
|
|
[dns.c dns.h readconf.c ssh_config.5 sshconnect.c]
update SSHFP validation. ok markus@
|
|
[dns.c dns.h readconf.c ssh-keygen.c sshconnect.c]
include SSHFP lookup code (not enabled by default). ok markus@
|
|
[readconf.c readconf.h ssh.1 ssh.c ssh_config.5]
remote x11 clients are now untrusted by default, uses xauth(8) to generate
untrusted cookies; ForwardX11Trusted=yes restores old behaviour.
ok deraadt; feedback and ok djm/fries
|
|
[readconf.c ssh_config.5]
default GSS API to no in client, too; ok jakob, deraadt@
|
|
[readconf.c readconf.h servconf.c servconf.h ssh.c]
remove unused kerberos code; ok henning@
|
|
[readconf.c]
rm gssapidelegatecreds alias; never supported before
|
|
[auth-krb5.c auth.h auth1.c monitor.c monitor.h monitor_wrap.c]
[monitor_wrap.h readconf.c servconf.c session.c ssh_config.5]
[sshconnect1.c sshd.c sshd_config sshd_config.5]
remove kerberos support from ssh1, since it has been replaced with GSSAPI;
but keep kerberos passwd auth for ssh1 and 2; ok djm, hin, henning, ...
|
|
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
|
|
[readconf.c ssh.c]
socks4->socks, since with support both 4 and 5; dtucker@zip.com.au
|
|
[auth1.c readconf.c readconf.h servconf.c servconf.h ssh.c ssh_config
ssh_config.5 sshconnect1.c sshd.8 sshd.c sshd_config sshd_config.5]
remove RhostsAuthentication; suggested by djm@ before; ok djm@, deraadt@,
fgsch@, miod@, henning@, jakob@ and others
|
|
- markus@cvs.openbsd.org 2003/07/22 13:35:22
[auth1.c auth.h auth-passwd.c monitor.c monitor.h monitor_wrap.c
monitor_wrap.h readconf.c readconf.h servconf.c servconf.h session.c ssh.1
ssh.c ssh_config.5 sshconnect1.c sshd.c sshd_config.5 ssh.h]
remove (already disabled) KRB4/AFS support, re-enable -k in ssh(1);
test+ok henning@
- (dtucker) [Makefile.in acconfig.h configure.ac] Remove KRB4/AFS support.
- (dtucker) [auth-krb4.c radix.c radix.h] Remove KRB4/AFS specific files.
I hope I got this right....
|
|
[readconf.c readconf.h ssh-keysign.c ssh.c]
fix AddressFamily option in config file, from brent@graveland.net;
ok markus@
|
|
[readconf.c]
do not dump core for 'ssh -o proxycommand host'; ok deraadt@
|
|
[readconf.c ssh_config ssh_config.5 ssh-keysign.c]
add AddressFamily option to ssh_config (like -4, -6 on commandline).
Portable bug #534; ok markus@
|
|
[readconf.c readconf.h ssh_config ssh_config.5 sshconnect.c]
add a ConnectTimeout option to ssh, based on patch from
Jean-Charles Longuet (jclonguet at free.fr); portable #207 ok markus@
|
|
[readconf.c servconf.c]
warn for unsupported config option. ok markus@
|
|
[readconf.c servconf.c]
disable kerberos when not supported. ok markus@
|
|
[readconf.c readconf.h servconf.c servconf.h]
always parse kerberos options. ok djm@ markus@
- (djm) Always parse UsePAM
|
|
[key.c key.h readconf.c readconf.h ssh_config.5 sshconnect.c]
[dns.c dns.h README.dns ssh-keygen.1 ssh-keygen.c]
add experimental support for verifying hos keys using DNS as described
in draft-ietf-secsh-dns-xx.txt. more information in README.dns.
ok markus@ and henning@
|
|
- djm@cvs.openbsd.org 2003/04/09 12:00:37
[readconf.c]
strip trailing whitespace from config lines before parsing.
Fixes bz 528; ok markus@
|
|
- markus@cvs.openbsd.org 2003/04/02 09:48:07
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
reapply rekeying chage, tested by henning@, ok djm@
|
|
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
rekeying bugfixes and automatic rekeying:
* both client and server rekey _automatically_
(a) after 2^31 packets, because after 2^32 packets
the sequence number for packets wraps
(b) after 2^(blocksize_in_bits/4) blocks
(see: draft-ietf-secsh-newmodes-00.txt)
(a) and (b) are _enabled_ by default, and only disabled for known
openssh versions, that don't support rekeying properly.
* client option 'RekeyLimit'
* do not reply to requests during rekeying
- markus@cvs.openbsd.org 2003/04/01 10:22:21
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
backout rekeying changes (for 3.6.1)
|
|
[readconf.c]
simplify ProxyCommand parsing, remove strcat/xrealloc; ok henning@, djm@
|
|
[readconf.c readconf.h ssh-keysign.8 ssh-keysign.c]
we cannot use HostbasedAuthentication for enabling ssh-keysign(8),
because HostbasedAuthentication might be enabled based on the
target host and ssh-keysign(8) does not know the remote hostname
and not trust ssh(1) about the hostname, so we add a new option
EnableSSHKeysign; ok djm@, report from zierke@informatik.uni-hamburg.de
|
|
lacking that concept can share it. Patch by vinschen@redhat.com
|
|
[auth-bsdauth.c auth-skey.c auth1.c auth2-chall.c auth2-none.c authfd.c
authfd.h monitor_wrap.c msg.c nchan.c radix.c readconf.c scp.c sftp.1
ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c
ssh-keysign.c ssh.1 sshconnect.c sshconnect.h sshconnect2.c ttymodes.c
xmalloc.h]
KNF done automatically while reading....
|
|
[readconf.c ssh.1]
change RhostsRSAAuthentication and RhostsAuthentication default to no
since ssh is no longer setuid root by default; ok markus@
|