| Age | Commit message (Collapse) | Author |
|---|
|
Allow secure files (~/.ssh/config, ~/.ssh/authorized_keys, etc.) to be
group-writable, provided that the group in question contains only the file's
owner. Rejected upstream for IMO incorrect reasons (e.g. a misunderstanding
about the contents of gr->gr_mem). Given that per-user groups and umask 002
are the default setup in Debian (for good reasons - this makes operating in
setgid directories with other groups much easier), we need to permit this by
default.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1060
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=314347
Last-Update: 2013-09-14
Patch-Name: user-group-modes.patch
|
|
Add compatibility aliases for ProtocolKeepAlives and SetupTimeOut, supported
in previous versions of Debian's OpenSSH package but since superseded by
ServerAliveInterval. (We're probably stuck with this bit for
compatibility.)
In batch mode, default ServerAliveInterval to five minutes.
Adjust documentation to match and to give some more advice on use of
keepalives.
Author: Ian Jackson <ian@chiark.greenend.org.uk>
Author: Matthew Vernon <matthew@debian.org>
Author: Colin Watson <cjwatson@debian.org>
Last-Update: 2015-11-29
Patch-Name: keepalive-extensions.patch
|
|
These options were used as part of Debian's response to CVE-2008-0166.
Nearly six years later, we no longer need to continue carrying the bulk
of that patch, but we do need to avoid failing when the associated
configuration options are still present.
Last-Update: 2014-02-09
Patch-Name: ssh-vulnkey-compat.patch
|
|
This patch has been rejected upstream: "None of the OpenSSH developers are
in favour of adding this, and this situation has not changed for several
years. This is not a slight on Simon's patch, which is of fine quality, but
just that a) we don't trust GSSAPI implementations that much and b) we don't
like adding new KEX since they are pre-auth attack surface. This one is
particularly scary, since it requires hooks out to typically root-owned
system resources."
However, quite a lot of people rely on this in Debian, and it's better to
have it merged into the main openssh package rather than having separate
-krb5 packages (as we used to have). It seems to have a generally good
security history.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242
Last-Updated: 2015-11-29
Patch-Name: gssapi.patch
|
|
Allow ssh_config and sshd_config kex parameters options be
prefixed by a '+' to indicate that the specified items be appended to the
default rather than replacing it.
approach suggested by dtucker@, feedback dlg@, ok markus@
Upstream-ID: 0f901137298fc17095d5756ff1561a7028e8882a
|
|
Turn off DSA by default; add HostKeyAlgorithms to the
server and PubkeyAcceptedKeyTypes to the client side, so it still can be
tested or turned back on; feedback and ok djm@
Upstream-ID: 8450a9e6d83f80c9bfed864ff061dfc9323cec21
|
|
Fix \-escaping bug that caused forward path parsing to skip
two characters and skip past the end of the string.
Based on patch by Salvador Fandino; ok dtucker@
Upstream-ID: 7b879dc446335677cbe4cb549495636a0535f3bd
|
|
Reorder EscapeChar option parsing to avoid a single-byte
out- of-bounds read. bz#2396 from Jaak Ristioja; ok dtucker@
Upstream-ID: 1dc6b5b63d1c8d9a88619da0b27ade461d79b060
|
|
Remove pattern length argument from match_pattern_list(), we
only ever use it for strlen(pattern).
Prompted by hanno AT hboeck.de pointing an out-of-bound read
error caused by an incorrect pattern length found using AFL
and his own tools.
ok markus@
|
|
rename xrealloc() to xreallocarray() since it follows
that form. ok djm
|
|
fix uninitialised memory read when parsing a config file
consisting of a single nul byte. Found by hanno AT hboeck.de using AFL; ok
dtucker
|
|
Revise hostkeys@openssh.com hostkey learning extension.
The client will not ask the server to prove ownership of the private
halves of any hitherto-unseen hostkeys it offers to the client.
Allow UpdateHostKeys option to take an 'ask' argument to let the
user manually review keys offered.
ok markus@
|
|
turn UpdateHostkeys off by default until I figure out
mlarkin@'s warning message; requested by deraadt@
|
|
Add a ssh_config HostbasedKeyType option to control which
host public key types are tried during hostbased authentication.
This may be used to prevent too many keys being sent to the server,
and blowing past its MaxAuthTries limit.
bz#2211 based on patch by Iain Morgan; ok markus@
|
|
Host key rotation support.
Add a hostkeys@openssh.com protocol extension (global request) for
a server to inform a client of all its available host key after
authentication has completed. The client may record the keys in
known_hosts, allowing it to upgrade to better host key algorithms
and a server to gracefully rotate its keys.
The client side of this is controlled by a UpdateHostkeys config
option (default on).
ok markus@
|
|
Replace <sys/param.h> with <limits.h> and other less
dirty headers where possible. Annotate <sys/param.h> lines with their
current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1,
LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of
MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution.
These are the files confirmed through binary verification. ok guenther,
millert, doug (helped with the verification protocol)
|
|
sync ssh-keysign, ssh-keygen and some dependencies to the
new buffer/key API; mostly mechanical, ok markus@
|
|
add sshd_config HostbasedAcceptedKeyTypes and
PubkeyAcceptedKeyTypes options to allow sshd to control what public key types
will be accepted. Currently defaults to all. Feedback & ok markus@
|
|
fix ssh_config FingerprintHash evaluation order; from Petr
Lautrbach
|
|
Add FingerprintHash option to control algorithm used for
key fingerprints. Default changes from MD5 to SHA256 and format from hex to
base64.
Feedback and ok naddy@ markus@
|
|
add RevokedHostKeys option for the client
Allow textfile or KRL-based revocation of hostkeys.
|
|
Remove unnecessary include: netinet/in_systm.h is not needed
by these programs.
NB. skipped for portable
ok deraadt@ millert@
|
|
Tweak config reparsing with host canonicalisation
Make the second pass through the config files always run when
hostname canonicalisation is enabled.
Add a "Match canonical" criteria that allows ssh_config Match
blocks to trigger only in the second config pass.
Add a -G option to ssh that causes it to parse its configuration
and dump the result to stdout, similar to "sshd -T"
Allow ssh_config Port options set in the second config parse
phase to be applied (they were being ignored).
bz#2267 bz#2286; ok markus
|
|
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
|
|
[readconf.c]
don't record duplicate IdentityFiles
|
|
[readconf.c readconf.h ssh.c ssh_config.5]
reparse ssh_config and ~/.ssh/config if hostname canonicalisation changes
the hostname. This allows users to write configurations that always
refer to canonical hostnames, e.g.
CanonicalizeHostname yes
CanonicalDomains int.example.org example.org
CanonicalizeFallbackLocal no
Host *.int.example.org
Compression off
Host *.example.org
User djm
ok markus@
|
|
[readconf.c]
when processing Match blocks, skip 'exec' clauses if previous predicates
failed to match; ok markus@
|
|
[Makefile.in auth.h auth2-jpake.c auth2.c jpake.c jpake.h monitor.c]
[monitor.h monitor_wrap.c monitor_wrap.h readconf.c readconf.h]
[schnorr.c schnorr.h servconf.c servconf.h ssh2.h sshconnect2.c]
remove experimental, never-enabled JPAKE code; ok markus@
|
|
build with HP-UX's compiler. Patch from Kevin Brott.
|
|
Solaris.
|
|
[authfd.c authfile.c key.c key.h myproposal.h pathnames.h readconf.c]
[servconf.c ssh-agent.c ssh-keygen.c ssh-keyscan.1 ssh-keyscan.c]
[ssh-keysign.c ssh.c ssh_config.5 sshd.8 sshd.c verify.c ssh-ed25519.c]
[sc25519.h sc25519.c hash.c ge25519_base.data ge25519.h ge25519.c]
[fe25519.h fe25519.c ed25519.c crypto_api.h blocks.c]
support ed25519 keys (hostkeys and user identities) using the public
domain ed25519 reference code from SUPERCOP, see
http://ed25519.cr.yp.to/software.html
feedback, help & ok djm@
|
|
[canohost.c clientloop.c match.c readconf.c sftp.c]
unsigned casts for ctype macros where neccessary
ok guenther millert markus
|
|
[readconf.c servconf.c ssh_config.5 sshd_config.5]
Disallow empty Match statements and add "Match all" which matches
everything. ok djm, man page help jmc@
|
|
[readconf.c ssh.c]
comment
|
|
[readconf.c]
Hostname may have %h sequences that should be expanded prior to Match
evaluation; spotted by Iain Morgan
|
|
[readconf.c ssh_config.5]
rename "command" subclause of the recently-added "Match" keyword to
"exec"; it's shorter, clearer in intent and we might want to add the
ability to match against the command being executed at the remote end in
the future.
|
|
[readconf.c readconf.h ssh.1 ssh.c ssh_config.5]
s/canonicalise/canonicalize/ for consistency with existing spelling,
e.g. authorized_keys; pointed out by naddy@
|
|
[readconf.c readconf.h roaming_client.c ssh.1 ssh.c ssh_config.5]
[sshconnect.c sshconnect.h]
Implement client-side hostname canonicalisation to allow an explicit
search path of domain suffixes to use to convert unqualified host names
to fully-qualified ones for host key matching.
This is particularly useful for host certificates, which would otherwise
need to list unqualified names alongside fully-qualified ones (and this
causes a number of problems).
"looks fine" markus@
|
|
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c]
refactor client config code a little:
add multistate option partsing to readconf.c, similar to servconf.c's
existing code.
move checking of options that accept "none" as an argument to readconf.c
add a lowercase() function and use it instead of explicit tolower() in
loops
part of a larger diff that was ok markus@
|
|
[readconf.c readconf.h ssh-keysign.c ssh.c ssh_config.5]
add a "Match" keyword to ssh_config that allows matching on hostname,
user and result of arbitrary commands. "nice work" markus@
|
|
[readconf.c readconf.h ssh_config.5 sshconnect.c]
Add a ssh_config ProxyUseFDPass option that supports the use of
ProxyCommands that establish a connection and then pass a connected
file descriptor back to ssh(1). This allows the ProxyCommand to exit
rather than have to shuffle data back and forth and enables ssh to use
getpeername, etc. to obtain address information just like it does with
regular directly-connected sockets. ok markus@
|
|
[readconf.c]
revert 1.203 while we investigate crashes reported by okan@
|
|
[readconf.c]
plug another memleak. bz#1967, from Zhenbo Xu, detected by Melton, ok djm
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
[servconf.c readconf.c]
remove now-unused variables
|
|
openbsd-compat/openbsd-compat.h] Add compat bits for scan_scaled.
|
|
[readconf.c servconf.c]
switch RekeyLimit traffic volume parsing to scan_scaled. ok djm@
|
|
[ssh_config.5 readconf.h readconf.c]
add the ability to ignore specific unrecognised ssh_config options;
bz#866; ok markus@
|
|
[ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c
ssh_config.5 packet.h]
Add an optional second argument to RekeyLimit in the client to allow
rekeying based on elapsed time in addition to amount of traffic.
with djm@ jmc@, ok djm
|
|
[readconf.c]
g/c unused variable (-Wunused)
|
