Age | Commit message (Collapse) | Author |
|
|
|
|
|
lacking that concept can share it. Patch by vinschen@redhat.com
|
|
[auth-bsdauth.c auth-skey.c auth1.c auth2-chall.c auth2-none.c authfd.c
authfd.h monitor_wrap.c msg.c nchan.c radix.c readconf.c scp.c sftp.1
ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c
ssh-keysign.c ssh.1 sshconnect.c sshconnect.h sshconnect2.c ttymodes.c
xmalloc.h]
KNF done automatically while reading....
|
|
[readconf.c ssh.1]
change RhostsRSAAuthentication and RhostsAuthentication default to no
since ssh is no longer setuid root by default; ok markus@
|
|
[readconf.c]
silently ignore deprecated options, since FallBackToRsh might be passed
by remote scp commands.
|
|
[readconf.c]
just warn about Deprecated options for now
|
|
[readconf.c readconf.h ssh.1 ssh.c]
deprecate FallBackToRsh and UseRsh; patch from djm@
|
|
[log.c log.h readconf.c servconf.c]
add SYSLOG_FACILITY_NOT_SET = -1, SYSLOG_LEVEL_NOT_SET = -1,
fixes arm/netbsd; based on patch from bjh21@netbsd.org; ok djm@
|
|
[readconf.c servconf.c]
remove #ifdef _PATH_XAUTH/#endif; ok markus@
|
|
[auth1.c auth2.c auth2-chall.c auth-bsdauth.c auth.c authfile.c auth.h]
[auth-krb4.c auth-rhosts.c auth-skey.c bufaux.c canohost.c channels.c]
[cipher.c clientloop.c compat.c compress.c deattack.c key.c log.c mac.c]
[match.c misc.c nchan.c packet.c readconf.c rijndael.c rijndael.h scard.c]
[servconf.c servconf.h serverloop.c session.c sftp.c sftp-client.c]
[sftp-glob.c sftp-int.c sftp-server.c ssh-add.c ssh-agent.c ssh.c]
[sshconnect1.c sshconnect2.c sshconnect.c sshd.8 sshd.c sshd_config]
[ssh-keygen.c sshlogin.c sshpty.c sshtty.c ttymodes.c uidswap.c]
basic KNF done while i was looking for something else
|
|
[auth2.c auth.c readconf.c servconf.c ssh-agent.c ssh-keygen.c]
enum/int type cleanup where it made sense to do so; ok markus@
|
|
[readconf.c readconf.h ssh.1 sshconnect.c]
add NoHostAuthenticationForLocalhost; note that the hostkey is
now check for localhost, too.
|
|
[readconf.c readconf.h scp.c sftp.c ssh.1]
add ClearAllForwardings ssh option and set it in scp and sftp; ok
markus@
|
|
[readconf.c readconf.h ssh.c]
fatal() for nonexistent -Fssh_config. ok markus@
|
|
[readconf.c ssh.1]
validate ports for LocalForward/RemoteForward.
add host/port alternative syntax for IPv6 (like -L/-R).
ok markus@
|
|
[readconf.c]
don't set DynamicForward unless Host matches
|
|
|
|
[authfd.c authfd.h readconf.c readconf.h scard.c scard.h ssh-add.c
ssh-agent.c ssh.c]
use strings instead of ints for smartcard reader ids
|
|
[readconf.c readconf.h ssh.1 ssh.c]
add 'SmartcardDevice' client option to specify which smartcard device
is used to access a smartcard used for storing the user's private RSA
key. ok markus@.
|
|
[readconf.c ssh.1 ssh.c sshconnect.c]
cleanup connect(); connection_attempts 4 -> 1; from
eivind@freebsd.org
|
|
[readconf.c ssh.1]
enable challenge-response auth by default; ok millert@
|
|
[sshpty.c]
update comment
|
|
[auth1.c auth.h auth-krb4.c auth-passwd.c readconf.c readconf.h
servconf.c servconf.h session.c sshconnect1.c sshd.c]
Kerberos v5 support for SSH1, mostly from Assar Westerlund
<assar@freebsd.org> and Bjorn Gronvall <bg@sics.se>. markus@ ok
|
|
[kexdh.c kexgex.c kex.h pathnames.h readconf.c servconf.h ssh.1
sshconnect1.c sshconnect2.c sshconnect.c sshconnect.h sshd.8]
get rid of known_hosts2, use it for hostkey lookup, but do not
modify.
|
|
[includes.h pathnames.h readconf.c servconf.c]
move the path for xauth to pathnames.h
|
|
[clientloop.c readconf.c ssh.c ssh.h]
don't perform escape processing when ``EscapeChar none''; ok markus@
|
|
[auth-chall.c auth.h auth1.c auth2-chall.c auth2.c readconf.c
readconf.h servconf.c servconf.h sshconnect1.c sshconnect2.c sshd.c]
improved kbd-interactive support. work by per@appgate.com and me
|
|
[readconf.c readconf.h ssh.1 ssh.c sshconnect.c]
implement 'ssh -b bind_address' like 'telnet -b'
|
|
[key.c key.h readconf.c readconf.h ssh.1 sshconnect2.c]
add HostKeyAlgorithms; based on patch from res@shore.net; ok provos@
|
|
[readconf.c servconf.c]
use fatal() or error() vs. fprintf(); ok markus@
|
|
[misc.c misc.h readconf.c servconf.c ssh.c sshd.c]
robust port validation; ok markus@ jakob@
|
|
[readconf.c]
typo
|
|
[auth-rhosts.c auth.h auth2.c buffer.c canohost.c canohost.h
compat.c compat.h hostfile.c pathnames.h readconf.c readconf.h
servconf.c servconf.h ssh.c sshconnect.c sshconnect.h sshconnect1.c
sshconnect2.c sshd_config]
implement HostbasedAuthentication (= RhostRSAAuthentication for ssh v2)
similar to RhostRSAAuthentication unless you enable (the experimental)
HostbasedUsesNameFromPacketOnly option. please test. :)
|
|
[buffer.c channels.c channels.h readconf.c ssh.c]
allow the ssh client act as a SOCKS4 proxy (dynamic local
portforwarding). work by Dan Kaminsky <dankamin@cisco.com> and me.
thanks to Dan for this great patch: use 'ssh -D 1080 host' and make
netscape use localhost:1080 as a socks proxy.
|
|
[readconf.c servconf.c]
correct comment; ok markus@
|
|
- markus@cvs.openbsd.org 2001/03/20 19:10:16
[readconf.c]
default to SSH protocol version 2
|
|
[auth.c readconf.c]
undo /etc/shell and proto 2,1 change for openssh-2.5.2
|
|
[kex.c match.c match.h readconf.c readconf.h sshconnect2.c]
add PreferredAuthentications
|
|
[readconf.c ssh_config]
default to SSH2, now that m68k runs fast
|
|
- markus@cvs.openbsd.org 2001/03/08 00:15:48
[readconf.c ssh.1]
turn off useprivilegedports by default. only rhost-auth needs
this. older sshd's may need this, too.
|
|
[authfd.c channels.c dh.c log.c readconf.c servconf.c sftp-int.c
ssh.c sshconnect.c sshd.c]
log functions should not be passed strings that end in newline as they
get passed on to syslog() and when logging to stderr, do_log() appends
its own newline.
|
|
[readconf.c]
look for id_rsa by default, before id_dsa
|
|
[Makefile.in sshd.8 sshconnect2.c readconf.h readconf.c packet.c
sshd.c ssh.c ssh.1 servconf.h servconf.c myproposal.h kex.h kex.c]
1) clean up the MAC support for SSH-2
2) allow you to specify the MAC with 'ssh -m'
3) or the 'MACs' keyword in ssh(d)_config
4) add hmac-{md5,sha1}-96
ok stevesk@, provos@
|
|
[readconf.c]
snprintf
|
|
[readconf.c]
``StrictHostKeyChecking ask'' documentation and small cleanup.
ok markus@
|
|
[auth1.c auth2.c readconf.c readconf.h servconf.c servconf.h
sshconnect1.c sshconnect2.c sshd.c]
rename skey -> challenge response.
auto-enable kbd-interactive for ssh2 if challenge-reponse is enabled.
|
|
Linux and works. So that is at least a good sign. =)
20010122
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/19 12:45:26 GMT 2001 by markus
[servconf.c ssh.h sshd.c]
only auth-chall.c needs #ifdef SKEY
- markus@cvs.openbsd.org 2001/01/19 15:55:10 GMT 2001 by markus
[auth-krb4.c auth-options.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth1.c auth2.c channels.c clientloop.c dh.c dispatch.c nchan.c
packet.c pathname.h readconf.c scp.c servconf.c serverloop.c
session.c ssh-add.c ssh-keygen.c ssh-keyscan.c ssh.c ssh.h
ssh1.h sshconnect1.c sshd.c ttymodes.c]
move ssh1 definitions to ssh1.h, pathnames to pathnames.h
- markus@cvs.openbsd.org 2001/01/19 16:48:14
[sshd.8]
fix typo; from stevesk@
- markus@cvs.openbsd.org 2001/01/19 16:50:58
[ssh-dss.c]
clear and free digest, make consistent with other code (use dlen); from
stevesk@
- markus@cvs.openbsd.org 2001/01/20 15:55:20 GMT 2001 by markus
[auth-options.c auth-options.h auth-rsa.c auth2.c]
pass the filename to auth_parse_options()
- markus@cvs.openbsd.org 2001/01/20 17:59:40 GMT 2001
[readconf.c]
fix SIGSEGV from -o ""; problem noted by jehsom@togetherweb.com
- stevesk@cvs.openbsd.org 2001/01/20 18:20:29
[sshconnect2.c]
dh_new_group() does not return NULL. ok markus@
- markus@cvs.openbsd.org 2001/01/20 21:33:42
[ssh-add.c]
do not loop forever if askpass does not exist; from
andrew@pimlott.ne.mediaone.net
- djm@cvs.openbsd.org 2001/01/20 23:00:56
[servconf.c]
Check for NULL return from strdelim; ok markus
- djm@cvs.openbsd.org 2001/01/20 23:02:07
[readconf.c]
KNF; ok markus
- jakob@cvs.openbsd.org 2001/01/21 9:00:33
[ssh-keygen.1]
remove -R flag; ok markus@
- markus@cvs.openbsd.org 2001/01/21 19:05:40
[atomicio.c automicio.h auth-chall.c auth-krb4.c auth-options.c
auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth.c auth.h auth1.c auth2-chall.c auth2.c authfd.c authfile.c
bufaux.c bufaux.h buffer.c canahost.c canahost.h channels.c
cipher.c cli.c clientloop.c clientloop.h compat.c compress.c
deattack.c dh.c dispatch.c groupaccess.c hmac.c hostfile.c kex.c
key.c key.h log-client.c log-server.c log.c log.h login.c login.h
match.c misc.c misc.h nchan.c packet.c pty.c radix.h readconf.c
readpass.c readpass.h rsa.c scp.c servconf.c serverloop.c serverloop.h
session.c sftp-server.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c
ssh-keyscan.c ssh-rsa.c ssh.c ssh.h sshconnect.c sshconnect.h
sshconnect1.c sshconnect2.c sshd.c tildexpand.c tildexpand.h
ttysmodes.c uidswap.c xmalloc.c]
split ssh.h and try to cleanup the #include mess. remove unnecessary
#includes. rename util.[ch] -> misc.[ch]
- (bal) renamed 'PIDDIR' to '_PATH_SSH_PIDDIR' to match OpenBSD tree
- (bal) Moved #ifdef KRB4 in auth-krb4.c above the #include to resolve
conflict when compiling for non-kerb install
- (bal) removed the #ifdef SKEY in auth1.c to match Markus' changes
on 1/19.
|
|
that I was able to get all the portable bits in the right location. As for
the SKEY comment there is an email out to Markus as to how it should be
resolved. Until then I just #ifdef SKEY/#endif out the whole block.
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/18 16:20:21
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1 ssh.h
sshd.8 sshd.c]
log() is at pri=LOG_INFO, since LOG_NOTICE goes to /dev/console on many
systems
- markus@cvs.openbsd.org 2001/01/18 16:59:59
[auth-passwd.c auth.c auth.h auth1.c auth2.c serverloop.c session.c
session.h sshconnect1.c]
1) removes fake skey from sshd, since this will be much
harder with /usr/libexec/auth/login_XXX
2) share/unify code used in ssh-1 and ssh-2 authentication (server side)
3) make addition of BSD_AUTH and other challenge reponse methods
easier.
- markus@cvs.openbsd.org 2001/01/18 17:12:43
[auth-chall.c auth2-chall.c]
rename *-skey.c *-chall.c since the files are not skey specific
|
|
- (bal) Fixed another typo in cli.c
- (bal) OpenBSD Sync
- markus@cvs.openbsd.org 2001/01/07 21:26:55
[cli.c]
typo
- markus@cvs.openbsd.org 2001/01/07 21:26:55
[cli.c]
missing free, stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/07 19:06:25
[auth1.c]
missing free, stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/07 11:28:04
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1
ssh.h sshd.8 sshd.c]
rename SYSLOG_LEVEL_INFO->SYSLOG_LEVEL_NOTICE
syslog priority changes:
fatal() LOG_ERR -> LOG_CRIT
log() LOG_INFO -> LOG_NOTICE
|