| Age | Commit message (Collapse) | Author |
|---|
|
ssh: Enable ForwardX11Trusted, returning to earlier semantics which cause
fewer problems with existing setups (http://bugs.debian.org/237021).
ssh: Set 'SendEnv LANG LC_*' by default (http://bugs.debian.org/264024).
ssh: Enable HashKnownHosts by default to try to limit the spread of ssh
worms.
ssh: Enable GSSAPIAuthentication and disable GSSAPIDelegateCredentials by
default.
sshd: Refer to /usr/share/doc/openssh-server/README.Debian.gz alongside
PermitRootLogin default.
Document all of this, along with several sshd defaults set in
debian/openssh-server.postinst.
Author: Russ Allbery <rra@debian.org>
Forwarded: not-needed
Last-Update: 2013-09-14
Patch-Name: debian-config.patch
|
|
Allow secure files (~/.ssh/config, ~/.ssh/authorized_keys, etc.) to be
group-writable, provided that the group in question contains only the file's
owner. Rejected upstream for IMO incorrect reasons (e.g. a misunderstanding
about the contents of gr->gr_mem). Given that per-user groups and umask 002
are the default setup in Debian (for good reasons - this makes operating in
setgid directories with other groups much easier), we need to permit this by
default.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1060
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=314347
Last-Update: 2013-09-14
Patch-Name: user-group-modes.patch
|
|
Add compatibility aliases for ProtocolKeepAlives and SetupTimeOut, supported
in previous versions of Debian's OpenSSH package but since superseded by
ServerAliveInterval. (We're probably stuck with this bit for
compatibility.)
In batch mode, default ServerAliveInterval to five minutes.
Adjust documentation to match and to give some more advice on use of
keepalives.
Author: Ian Jackson <ian@chiark.greenend.org.uk>
Author: Matthew Vernon <matthew@debian.org>
Author: Colin Watson <cjwatson@debian.org>
Last-Update: 2013-09-14
Patch-Name: keepalive-extensions.patch
|
|
These options were used as part of Debian's response to CVE-2008-0166.
Nearly six years later, we no longer need to continue carrying the bulk
of that patch, but we do need to avoid failing when the associated
configuration options are still present.
Last-Update: 2014-02-09
Patch-Name: ssh-vulnkey-compat.patch
|
|
This patch has been rejected upstream: "None of the OpenSSH developers are
in favour of adding this, and this situation has not changed for several
years. This is not a slight on Simon's patch, which is of fine quality, but
just that a) we don't trust GSSAPI implementations that much and b) we don't
like adding new KEX since they are pre-auth attack surface. This one is
particularly scary, since it requires hooks out to typically root-owned
system resources."
However, quite a lot of people rely on this in Debian, and it's better to
have it merged into the main openssh package rather than having separate
-krb5 packages (as we used to have). It seems to have a generally good
security history.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242
Last-Updated: 2014-02-10
Patch-Name: gssapi.patch
|
|
Solaris.
|
|
[authfd.c authfile.c key.c key.h myproposal.h pathnames.h readconf.c]
[servconf.c ssh-agent.c ssh-keygen.c ssh-keyscan.1 ssh-keyscan.c]
[ssh-keysign.c ssh.c ssh_config.5 sshd.8 sshd.c verify.c ssh-ed25519.c]
[sc25519.h sc25519.c hash.c ge25519_base.data ge25519.h ge25519.c]
[fe25519.h fe25519.c ed25519.c crypto_api.h blocks.c]
support ed25519 keys (hostkeys and user identities) using the public
domain ed25519 reference code from SUPERCOP, see
http://ed25519.cr.yp.to/software.html
feedback, help & ok djm@
|
|
[canohost.c clientloop.c match.c readconf.c sftp.c]
unsigned casts for ctype macros where neccessary
ok guenther millert markus
|
|
[readconf.c servconf.c ssh_config.5 sshd_config.5]
Disallow empty Match statements and add "Match all" which matches
everything. ok djm, man page help jmc@
|
|
[readconf.c ssh.c]
comment
|
|
[readconf.c]
Hostname may have %h sequences that should be expanded prior to Match
evaluation; spotted by Iain Morgan
|
|
[readconf.c ssh_config.5]
rename "command" subclause of the recently-added "Match" keyword to
"exec"; it's shorter, clearer in intent and we might want to add the
ability to match against the command being executed at the remote end in
the future.
|
|
[readconf.c readconf.h ssh.1 ssh.c ssh_config.5]
s/canonicalise/canonicalize/ for consistency with existing spelling,
e.g. authorized_keys; pointed out by naddy@
|
|
[readconf.c readconf.h roaming_client.c ssh.1 ssh.c ssh_config.5]
[sshconnect.c sshconnect.h]
Implement client-side hostname canonicalisation to allow an explicit
search path of domain suffixes to use to convert unqualified host names
to fully-qualified ones for host key matching.
This is particularly useful for host certificates, which would otherwise
need to list unqualified names alongside fully-qualified ones (and this
causes a number of problems).
"looks fine" markus@
|
|
[canohost.c misc.c misc.h readconf.c sftp-server.c ssh.c]
refactor client config code a little:
add multistate option partsing to readconf.c, similar to servconf.c's
existing code.
move checking of options that accept "none" as an argument to readconf.c
add a lowercase() function and use it instead of explicit tolower() in
loops
part of a larger diff that was ok markus@
|
|
[readconf.c readconf.h ssh-keysign.c ssh.c ssh_config.5]
add a "Match" keyword to ssh_config that allows matching on hostname,
user and result of arbitrary commands. "nice work" markus@
|
|
[readconf.c readconf.h ssh_config.5 sshconnect.c]
Add a ssh_config ProxyUseFDPass option that supports the use of
ProxyCommands that establish a connection and then pass a connected
file descriptor back to ssh(1). This allows the ProxyCommand to exit
rather than have to shuffle data back and forth and enables ssh to use
getpeername, etc. to obtain address information just like it does with
regular directly-connected sockets. ok markus@
|
|
[readconf.c]
revert 1.203 while we investigate crashes reported by okan@
|
|
[readconf.c]
plug another memleak. bz#1967, from Zhenbo Xu, detected by Melton, ok djm
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
[servconf.c readconf.c]
remove now-unused variables
|
|
openbsd-compat/openbsd-compat.h] Add compat bits for scan_scaled.
|
|
[readconf.c servconf.c]
switch RekeyLimit traffic volume parsing to scan_scaled. ok djm@
|
|
[ssh_config.5 readconf.h readconf.c]
add the ability to ignore specific unrecognised ssh_config options;
bz#866; ok markus@
|
|
[ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c
ssh_config.5 packet.h]
Add an optional second argument to RekeyLimit in the client to allow
rekeying based on elapsed time in addition to amount of traffic.
with djm@ jmc@, ok djm
|
|
[readconf.c]
g/c unused variable (-Wunused)
|
|
[ssh.c readconf.c readconf.h]
Don't complain if IdentityFiles specified in system-wide configs are
missing. ok djm, deraadt
|
|
[readconf.c ssh.c readconf.h sshconnect2.c]
Keep track of which IndentityFile options were manually supplied and which
were default options, and don't warn if the latter are missing.
ok markus@
|
|
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h]
unbreak remote portforwarding with dynamic allocated listen ports:
1) send the actual listen port in the open message (instead of 0).
this allows multiple forwardings with a dynamic listen port
2) update the matching permit-open entry, so we can identify where
to connect to
report: den at skbkontur.ru and P. Szczygielski
feedback and ok djm@
|
|
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c]
Remove undocumented legacy options UserKnownHostsFile2 and
GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile
accept multiple paths per line and making their defaults include
known_hosts2; ok markus
|
|
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5]
Add a RequestTTY ssh_config option to allow configuration-based
control over tty allocation (like -t/-T); ok markus@
|
|
[readconf.c ssh_config.5]
support negated Host matching, e.g.
Host *.example.org !c.example.org
User mekmitasdigoat
Will match "a.example.org", "b.example.org", but not "c.example.org"
ok markus@
|
|
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
|
|
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
|
|
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c]
[ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on
platforms that don't have the requisite OpenSSL support. ok dtucker@
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
|
|
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
|
|
[channels.c mux.c readconf.c readconf.h ssh.h]
bz#1327: remove hardcoded limit of 100 permitopen clauses and port
forwards per direction; ok markus@ stevesk@
|
|
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c]
mux support for remote forwarding with dynamic port allocation,
use with
LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost`
feedback and ok djm@
|
|
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
|
|
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
|
|
Remove hacks add for RoutingDomain in preparation for its removal.
|
|
RoutingDomain an unsupported option on platforms that don't have it.
|
|
[sshd_config.5 readconf.c ssh_config.5 scp.1 servconf.c sftp.1 ssh.1]
Rename RDomain config option to RoutingDomain to be more clear and
consistent with other options.
NOTE: if you currently use RDomain in the ssh client or server config,
or ssh/sshd -o, you must update to use RoutingDomain.
ok markus@ djm@
|
|
[readconf.c servconf.c misc.h ssh-keyscan.c misc.c]
validate routing domain is in range 0-RT_TABLEID_MAX.
'Looks right' deraadt@
|
|
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
|
|
- markus@cvs.openbsd.org 2009/10/08 14:03:41
[sshd_config readconf.c ssh_config.5 servconf.c sshd_config.5]
disable protocol 1 by default (after a transition period of about 10 years)
ok deraadt
|
|
[readconf.h readconf.c]
Add client option UseRoaming. It doesn't do anything yet but will
control whether the client tries to use roaming if enabled on the
server. From Martin Forssen.
ok markus@
|
|
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c]
[readconf.h serverloop.c ssh.c]
support remote port forwarding with a zero listen port (-R0:...) to
dyamically allocate a listen port at runtime (this is actually
specified in rfc4254); bz#1003 ok markus@
|
