| Age | Commit message (Collapse) | Author |
|---|
|
This patch has been rejected upstream: "None of the OpenSSH developers are
in favour of adding this, and this situation has not changed for several
years. This is not a slight on Simon's patch, which is of fine quality, but
just that a) we don't trust GSSAPI implementations that much and b) we don't
like adding new KEX since they are pre-auth attack surface. This one is
particularly scary, since it requires hooks out to typically root-owned
system resources."
However, quite a lot of people rely on this in Debian, and it's better to
have it merged into the main openssh package rather than having separate
-krb5 packages (as we used to have). It seems to have a generally good
security history.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242
Last-Updated: 2018-10-20
Patch-Name: gssapi.patch
|
|
it to specify which signature algorithms may be used by CAs when signing
certificates. Useful if you want to ban RSA/SHA1; ok markus@
OpenBSD-Commit-ID: 9159e5e9f67504829bf53ff222057307a6e3230f
|
|
ssh(1) setuid has been removed, remove supporting code and clean up
references to it in the man pages
We have not shipped ssh(1) the setuid bit since 2002. If ayone
really needs to make connections from a low port number this can
be implemented via a small setuid ProxyCommand.
ok markus@ jmc@ djm@
OpenBSD-Commit-ID: d03364610b7123ae4c6792f5274bd147b6de717e
|
|
environment variables for the remote session (subject to the server accepting
them)
refactor SendEnv to remove the arbitrary limit of variable names.
ok markus@
OpenBSD-Commit-ID: cfbb00d9b0e10c1ffff1d83424351fd961d1f2be
|
|
command-line argument to ssh(1) that directs it to bind its outgoing
connection to the address of the specified network interface.
BindInterface prefers to use addresses that aren't loopback or link-
local, but will fall back to those if no other addresses of the
required family are available on that interface.
Based on patch by Mike Manning in bz#2820, ok dtucker@
OpenBSD-Commit-ID: c5064d285c2851f773dd736a2c342aa384fbf713
|
|
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
|
|
Expand ssh_config's StrictModes option with two new
settings:
StrictModes=accept-new will automatically accept hitherto-unseen keys
but will refuse connections for changed or invalid hostkeys.
StrictModes=off is the same as StrictModes=no
Motivation:
StrictModes=no combines two behaviours for host key processing:
automatically learning new hostkeys and continuing to connect to hosts
with invalid/changed hostkeys. The latter behaviour is quite dangerous
since it removes most of the protections the SSH protocol is supposed to
provide.
Quite a few users want to automatically learn hostkeys however, so
this makes that feature available with less danger.
At some point in the future, StrictModes=no will change to be a synonym
for accept-new, with its current behaviour remaining available via
StrictModes=off.
bz#2400, suggested by Michael Samuel; ok markus
Upstream-ID: 0f55502bf75fc93a74fb9853264a8276b9680b64
|
|
Add RemoteCommand option to specify a command in the
ssh config file instead of giving it on the client's command line. This
command will be executed on the remote host. The feature allows to automate
tasks using ssh config. OK markus@
Upstream-ID: 5d982fc17adea373a9c68cae1021ce0a0904a5ee
|
|
remove SSHv1 configuration options and man pages bits
ok markus@
Upstream-ID: 84638c23546c056727b7a7d653c72574e0f19424
|
|
remove SSHv1 ciphers; ok markus@
Upstream-ID: e5ebc5e540d7f23a8c1266db1839794d4d177890
|
|
remove options.protocol and client Protocol
configuration knob
ok markus@
Upstream-ID: 5a967f5d06e2d004b0235457b6de3a9a314e9366
|
|
Add SyslogFacility option to ssh(1) matching the
equivalent option in sshd(8). bz#2705, patch from erahn at arista.com, ok
djm@
Upstream-ID: d5115c2c0193ceb056ed857813b2a7222abda9ed
|
|
Add a ProxyJump ssh_config(5) option and corresponding -J
ssh(1) command-line flag to allow simplified indirection through a SSH
bastion or "jump host".
These options construct a proxy command that connects to the
specified jump host(s) (more than one may be specified) and uses
port-forwarding to establish a connection to the next destination.
This codifies the safest way of indirecting connections through SSH
servers and makes it easy to use.
ok markus@
Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
|
|
Move the host and port used by ssh -W into the Options
struct. This will make future changes a bit easier. ok djm@
Upstream-ID: 151bce5ecab2fbedf0d836250a27968d30389382
|
|
IdentityAgent for specifying specific agent sockets; ok
djm@
Upstream-ID: 3e6a15eb89ea0fd406f108826b7dc7dec4fbfac1
|
|
Include directive for ssh_config(5); feedback & ok markus@
Upstream-ID: ae3b76e2e343322b9f74acde6f1e1c5f027d5fff
|
|
remove roaming support; ok djm@
Upstream-ID: 2cab8f4b197bc95776fb1c8dc2859dad0c64dc56
|
|
Add an AddKeysToAgent client option which can be set to
'yes', 'no', 'ask', or 'confirm', and defaults to 'no'. When enabled, a
private key that is used during authentication will be added to ssh-agent if
it is running (with confirmation enabled if set to 'confirm').
Initial version from Joachim Schipper many years ago.
ok markus@
Upstream-ID: a680db2248e8064ec55f8be72d539458c987d5f4
|
|
add ssh_config CertificateFile option to explicitly list
a certificate; patch from Meghana Bhat on bz#2436; ok markus@
Upstream-ID: 58648ec53c510b41c1f46d8fe293aadc87229ab8
|
|
Turn off DSA by default; add HostKeyAlgorithms to the
server and PubkeyAcceptedKeyTypes to the client side, so it still can be
tested or turned back on; feedback and ok djm@
Upstream-ID: 8450a9e6d83f80c9bfed864ff061dfc9323cec21
|
|
Revise hostkeys@openssh.com hostkey learning extension.
The client will not ask the server to prove ownership of the private
halves of any hitherto-unseen hostkeys it offers to the client.
Allow UpdateHostKeys option to take an 'ask' argument to let the
user manually review keys offered.
ok markus@
|
|
Add a ssh_config HostbasedKeyType option to control which
host public key types are tried during hostbased authentication.
This may be used to prevent too many keys being sent to the server,
and blowing past its MaxAuthTries limit.
bz#2211 based on patch by Iain Morgan; ok markus@
|
|
Host key rotation support.
Add a hostkeys@openssh.com protocol extension (global request) for
a server to inform a client of all its available host key after
authentication has completed. The client may record the keys in
known_hosts, allowing it to upgrade to better host key algorithms
and a server to gracefully rotate its keys.
The client side of this is controlled by a UpdateHostkeys config
option (default on).
ok markus@
|
|
sync ssh-keysign, ssh-keygen and some dependencies to the
new buffer/key API; mostly mechanical, ok markus@
|
|
Add FingerprintHash option to control algorithm used for
key fingerprints. Default changes from MD5 to SHA256 and format from hex to
base64.
Feedback and ok naddy@ markus@
|
|
add RevokedHostKeys option for the client
Allow textfile or KRL-based revocation of hostkeys.
|
|
Tweak config reparsing with host canonicalisation
Make the second pass through the config files always run when
hostname canonicalisation is enabled.
Add a "Match canonical" criteria that allows ssh_config Match
blocks to trigger only in the second config pass.
Add a -G option to ssh that causes it to parse its configuration
and dump the result to stdout, similar to "sshd -T"
Allow ssh_config Port options set in the second config parse
phase to be applied (they were being ignored).
bz#2267 bz#2286; ok markus
|
|
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
|
|
[readconf.c readconf.h ssh.c ssh_config.5]
reparse ssh_config and ~/.ssh/config if hostname canonicalisation changes
the hostname. This allows users to write configurations that always
refer to canonical hostnames, e.g.
CanonicalizeHostname yes
CanonicalDomains int.example.org example.org
CanonicalizeFallbackLocal no
Host *.int.example.org
Compression off
Host *.example.org
User djm
ok markus@
|
|
[Makefile.in auth.h auth2-jpake.c auth2.c jpake.c jpake.h monitor.c]
[monitor.h monitor_wrap.c monitor_wrap.h readconf.c readconf.h]
[schnorr.c schnorr.h servconf.c servconf.h ssh2.h sshconnect2.c]
remove experimental, never-enabled JPAKE code; ok markus@
|
|
[readconf.c readconf.h ssh.1 ssh.c ssh_config.5]
s/canonicalise/canonicalize/ for consistency with existing spelling,
e.g. authorized_keys; pointed out by naddy@
|
|
[readconf.c readconf.h roaming_client.c ssh.1 ssh.c ssh_config.5]
[sshconnect.c sshconnect.h]
Implement client-side hostname canonicalisation to allow an explicit
search path of domain suffixes to use to convert unqualified host names
to fully-qualified ones for host key matching.
This is particularly useful for host certificates, which would otherwise
need to list unqualified names alongside fully-qualified ones (and this
causes a number of problems).
"looks fine" markus@
|
|
[readconf.c readconf.h ssh-keysign.c ssh.c ssh_config.5]
add a "Match" keyword to ssh_config that allows matching on hostname,
user and result of arbitrary commands. "nice work" markus@
|
|
[readconf.c readconf.h ssh_config.5 sshconnect.c]
Add a ssh_config ProxyUseFDPass option that supports the use of
ProxyCommands that establish a connection and then pass a connected
file descriptor back to ssh(1). This allows the ProxyCommand to exit
rather than have to shuffle data back and forth and enables ssh to use
getpeername, etc. to obtain address information just like it does with
regular directly-connected sockets. ok markus@
|
|
[ssh_config.5 readconf.h readconf.c]
add the ability to ignore specific unrecognised ssh_config options;
bz#866; ok markus@
|
|
[ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c
ssh_config.5 packet.h]
Add an optional second argument to RekeyLimit in the client to allow
rekeying based on elapsed time in addition to amount of traffic.
with djm@ jmc@, ok djm
|
|
[ssh.c readconf.c readconf.h]
Don't complain if IdentityFiles specified in system-wide configs are
missing. ok djm, deraadt
|
|
[readconf.c ssh.c readconf.h sshconnect2.c]
Keep track of which IndentityFile options were manually supplied and which
were default options, and don't warn if the latter are missing.
ok markus@
|
|
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h]
unbreak remote portforwarding with dynamic allocated listen ports:
1) send the actual listen port in the open message (instead of 0).
this allows multiple forwardings with a dynamic listen port
2) update the matching permit-open entry, so we can identify where
to connect to
report: den at skbkontur.ru and P. Szczygielski
feedback and ok djm@
|
|
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c]
Remove undocumented legacy options UserKnownHostsFile2 and
GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile
accept multiple paths per line and making their defaults include
known_hosts2; ok markus
|
|
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5]
Add a RequestTTY ssh_config option to allow configuration-based
control over tty allocation (like -t/-T); ok markus@
|
|
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
|
|
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
|
|
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
|
|
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
|
|
[channels.c mux.c readconf.c readconf.h ssh.h]
bz#1327: remove hardcoded limit of 100 permitopen clauses and port
forwards per direction; ok markus@ stevesk@
|
|
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c]
mux support for remote forwarding with dynamic port allocation,
use with
LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost`
feedback and ok djm@
|
|
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
|
|
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
|
|
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
|
