summaryrefslogtreecommitdiff
path: root/readconf.h
AgeCommit message (Collapse)Author
2012-05-18* New upstream release (http://www.openssh.org/txt/release-6.0).Colin Watson
- Fix IPQoS not being set on non-mapped v4-in-v6 addressed connections (closes: #643312, #650512). - Add a new privilege separation sandbox implementation for Linux's new seccomp sandbox, automatically enabled on platforms that support it. (Note: privilege separation sandboxing is still experimental.)
2012-05-17merge 6.0p1Colin Watson
2011-10-02 - markus@cvs.openbsd.org 2011/09/23 07:45:05Darren Tucker
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h] unbreak remote portforwarding with dynamic allocated listen ports: 1) send the actual listen port in the open message (instead of 0). this allows multiple forwardings with a dynamic listen port 2) update the matching permit-open entry, so we can identify where to connect to report: den at skbkontur.ru and P. Szczygielski feedback and ok djm@
2011-09-06* New upstream release (http://www.openssh.org/txt/release-5.9).Colin Watson
- Introduce sandboxing of the pre-auth privsep child using an optional sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables mandatory restrictions on the syscalls the privsep child can perform. - Add new SHA256-based HMAC transport integrity modes from http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt. - The pre-authentication sshd(8) privilege separation slave process now logs via a socket shared with the master process, avoiding the need to maintain /dev/log inside the chroot (closes: #75043, #429243, #599240). - ssh(1) now warns when a server refuses X11 forwarding (closes: #504757). - sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths, separated by whitespace (closes: #76312). The authorized_keys2 fallback is deprecated but documented (closes: #560156). - ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4 ToS/DSCP (closes: #498297). - ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add - < /path/to/key" (closes: #229124). - Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691). - Say "required" rather than "recommended" in unprotected-private-key warning (LP: #663455).
2011-09-06merge 5.9p1Colin Watson
2011-05-29 - djm@cvs.openbsd.org 2011/05/24 07:15:47Damien Miller
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c] Remove undocumented legacy options UserKnownHostsFile2 and GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile accept multiple paths per line and making their defaults include known_hosts2; ok markus
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:34:32Damien Miller
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5] Add a RequestTTY ssh_config option to allow configuration-based control over tty allocation (like -t/-T); ok markus@
2011-01-24* New upstream release (http://www.openssh.org/txt/release-5.7):Colin Watson
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. - sftp(1)/sftp-server(8): add a protocol extension to support a hard link operation. It is available through the "ln" command in the client. The old "ln" behaviour of creating a symlink is available using its "-s" option or through the preexisting "symlink" command. - scp(1): Add a new -3 option to scp: Copies between two remote hosts are transferred through the local host (closes: #508613). - ssh(1): "atomically" create the listening mux socket by binding it on a temporary name and then linking it into position after listen() has succeeded. This allows the mux clients to determine that the server socket is either ready or stale without races (closes: #454784). Stale server sockets are now automatically removed (closes: #523250). - ssh(1): install a SIGCHLD handler to reap expired child process (closes: #594687). - ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent temporary directories (closes: #357469, although only if you arrange for ssh-agent to actually see $TMPDIR since the setgid bit will cause it to be stripped off).
2011-01-24merge 5.7p1Colin Watson
2011-01-24import openssh-5.6p1-gsskex-all-20110101.patchColin Watson
2010-11-20 - djm@cvs.openbsd.org 2010/11/13 23:27:51Damien Miller
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h] [servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5] allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of hardcoding lowdelay/throughput. bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
2010-09-24 - djm@cvs.openbsd.org 2010/09/22 05:01:30Damien Miller
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h] [servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5] add a KexAlgorithms knob to the client and server configuration to allow selection of which key exchange methods are used by ssh(1) and sshd(8) and their order of preference. ok markus@
2010-08-23* New upstream release (http://www.openssh.com/txt/release-5.6):Colin Watson
- Added a ControlPersist option to ssh_config(5) that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity (closes: #335697, #350898, #454787, #500573, #550262). - Support AuthorizedKeysFile, AuthorizedPrincipalsFile, HostbasedUsesNameFromPacketOnly, and PermitTunnel in sshd_config(5) Match blocks (closes: #549858). - sftp(1): fix ls in working directories that contain globbing characters in their pathnames (LP: #530714).
2010-08-23merge 5.6p1Colin Watson
2010-08-03 - djm@cvs.openbsd.org 2010/07/19 09:15:12Damien Miller
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5] add a "ControlPersist" option that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but further hacked on by wmertens AT cisco.com, apb AT cequrux.com, martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 23:10:30Damien Miller
[ssh.c] log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts; "nice!" markus@
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 07:14:46Damien Miller
[channels.c mux.c readconf.c readconf.h ssh.h] bz#1327: remove hardcoded limit of 100 permitopen clauses and port forwards per direction; ok markus@ stevesk@
2010-05-21 - markus@cvs.openbsd.org 2010/05/16 12:55:51Damien Miller
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c] mux support for remote forwarding with dynamic port allocation, use with LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost` feedback and ok djm@
2010-03-31* New upstream release (LP: #535029).Colin Watson
- After a transition period of about 10 years, this release disables SSH protocol 1 by default. Clients and servers that need to use the legacy protocol must explicitly enable it in ssh_config / sshd_config or on the command-line. - Remove the libsectok/OpenSC-based smartcard code and add support for PKCS#11 tokens. This support is enabled by default in the Debian packaging, since it now doesn't involve additional library dependencies (closes: #231472, LP: #16918). - Add support for certificate authentication of users and hosts using a new, minimal OpenSSH certificate format (closes: #482806). - Added a 'netcat mode' to ssh(1): "ssh -W host:port ...". - Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian package, this overlaps with the key blacklisting facility added in openssh 1:4.7p1-9, but with different file formats and slightly different scopes; for the moment, I've roughly merged the two.) - Various multiplexing improvements, including support for requesting port-forwardings via the multiplex protocol (closes: #360151). - Allow setting an explicit umask on the sftp-server(8) commandline to override whatever default the user has (closes: #496843). - Many sftp client improvements, including tab-completion, more options, and recursive transfer support for get/put (LP: #33378). The old mget/mput commands never worked properly and have been removed (closes: #270399, #428082). - Do not prompt for a passphrase if we fail to open a keyfile, and log the reason why the open failed to debug (closes: #431538). - Prevent sftp from crashing when given a "-" without a command. Also, allow whitespace to follow a "-" (closes: #531561).
2010-03-31merge 5.4p1Colin Watson
2010-02-12 - markus@cvs.openbsd.org 2010/02/08 10:50:20Damien Miller
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c] [ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5] replace our obsolete smartcard code with PKCS#11. ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11 provider (shared library) while ssh-agent(1) delegates PKCS#11 to a forked a ssh-pkcs11-helper process. PKCS#11 is currently a compile time option. feedback and ok djm@; inspired by patches from Alon Bar-Lev `
2010-01-24* New upstream release.Colin Watson
* Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.3p1-gsskex-all-20100124.patch.
2010-01-24import openssh-5.3p1-gsskex-all-20100124.patchColin Watson
2010-01-10 - dtucker@cvs.openbsd.org 2010/01/09 23:04:13Darren Tucker
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c readconf.h scp.1 sftp.1 ssh_config.5 misc.h] Remove RoutingDomain from ssh since it's now not needed. It can be replaced with "route exec" or "nc -V" as a proxycommand. "route exec" also ensures that trafic such as DNS lookups stays withing the specified routingdomain. For example (from reyk): # route -T 2 exec /usr/sbin/sshd or inherited from the parent process $ route -T 2 exec sh $ ssh 10.1.2.3 ok deraadt@ markus@ stevesk@ reyk@
2010-01-08 - reyk@cvs.openbsd.org 2009/10/28 16:38:18Darren Tucker
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1 sftp.1 sshd_config.5 readconf.c ssh.c misc.c] Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan. ok markus@
2010-01-01* New upstream release (closes: #536182). Yes, I know 5.3p1 has been outColin Watson
for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958).
2010-01-01import openssh-5.2p1-gsskex-all-20090726.patchColin Watson
2009-12-29import openssh-5.1p1-gsskex-cjwatson-20080722.patchColin Watson
2009-12-29import openssh-4.6p1-gsskex-20070312.patchColin Watson
2009-12-29import openssh-4.3p2-gsskex-20060223.patchColin Watson
2009-12-29import openssh-4.2p1-gsskex-20050926-2.patchColin Watson
2009-07-06 - andreas@cvs.openbsd.org 2009/06/27 09:35:06Darren Tucker
[readconf.h readconf.c] Add client option UseRoaming. It doesn't do anything yet but will control whether the client tries to use roaming if enabled on the server. From Martin Forssen. ok markus@
2009-02-14 - djm@cvs.openbsd.org 2009/02/12 03:00:56Damien Miller
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c] [readconf.h serverloop.c ssh.c] support remote port forwarding with a zero listen port (-R0:...) to dyamically allocate a listen port at runtime (this is actually specified in rfc4254); bz#1003 ok markus@
2009-01-28 - djm@cvs.openbsd.org 2009/01/22 10:02:34Damien Miller
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h] [serverloop.c ssh-keyscan.c ssh.c sshd.c] make a2port() return -1 when it encounters an invalid port number rather than 0, which it will now treat as valid (needed for future work) adjust current consumers of a2port() to check its return value is <= 0, which in turn required some things to be converted from u_short => int make use of int vs. u_short consistent in some other places too feedback & ok markus@
2008-11-05 - djm@cvs.openbsd.org 2008/11/04 08:22:13Damien Miller
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h] [readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5] [sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c] [Makefile.in] Add support for an experimental zero-knowledge password authentication method using the J-PAKE protocol described in F. Hao, P. Ryan, "Password Authenticated Key Exchange by Juggling", 16th Workshop on Security Protocols, Cambridge, April 2008. This method allows password-based authentication without exposing the password to the server. Instead, the client and server exchange cryptographic proofs to demonstrate of knowledge of the password while revealing nothing useful to an attacker or compromised endpoint. This is experimental, work-in-progress code and is presently compiled-time disabled (turn on -DJPAKE in Makefile.inc). "just commit it. It isn't too intrusive." deraadt@
2008-11-03 - stevesk@cvs.openbsd.org 2008/11/01 17:40:33Damien Miller
[clientloop.c readconf.c readconf.h ssh.c] merge dynamic forward parsing into parse_forward(); 'i think this is OK' djm@
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-06-30 - grunk@cvs.openbsd.org 2008/06/26 11:46:31Damien Miller
[readconf.c readconf.h ssh.1 ssh_config.5 sshconnect.c] Move SSH Fingerprint Visualization away from sharing the config option CheckHostIP to an own config option named VisualHostKey. While there, fix the behaviour that ssh would draw a random art picture on every newly seen host even when the option was not enabled. prodded by deraadt@, discussions, help and ok markus@ djm@ dtucker@
2008-06-13 - grunk@cvs.openbsd.org 2008/06/11 21:01:35Darren Tucker
[ssh_config.5 key.h readconf.c readconf.h ssh-keygen.1 ssh-keygen.c key.c sshconnect.c] Introduce SSH Fingerprint ASCII Visualization, a technique inspired by the graphical hash visualization schemes known as "random art", and by Dan Kaminsky's musings on the subject during a BlackOp talk at the 23C3 in Berlin. Scientific publication (original paper): "Hash Visualization: a New Technique to improve Real-World Security", Perrig A. and Song D., 1999, International Workshop on Cryptographic Techniques and E-Commerce (CrypTEC '99) http://sparrow.ece.cmu.edu/~adrian/projects/validation/validation.pdf The algorithm used here is a worm crawling over a discrete plane, leaving a trace (augmenting the field) everywhere it goes. Movement is taken from dgst_raw 2bit-wise. Bumping into walls makes the respective movement vector be ignored for this turn, thus switching to the other color of the chessboard. Graphs are not unambiguous for now, because circles in graphs can be walked in either direction. discussions with several people, help, corrections and ok markus@ djm@
2008-06-02Check compromised key blacklist in ssh or ssh-add, as well as in theColin Watson
server (LP: #232391). To override the blacklist check in ssh temporarily, use 'ssh -o UseBlacklistedKeys=yes'; there is no override for the blacklist check in ssh-add.
2008-02-10 - djm@cvs.openbsd.org 2008/01/19 23:09:49Damien Miller
[readconf.c readconf.h sshconnect2.c] promote rekeylimit to a int64 so it can hold the maximum useful limit of 2^32; report and patch from Jan.Pechanec AT Sun.COM, ok dtucker@
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-07-12 - markus@cvs.openbsd.org 2006/07/11 18:50:48Darren Tucker
[clientloop.c ssh.1 ssh.c channels.c ssh_config.5 readconf.h session.c channels.h readconf.c] add ExitOnForwardFailure: terminate the connection if ssh(1) cannot set up all requested dynamic, local, and remote port forwardings. ok djm, dtucker, stevesk, jmc
2006-05-12* Update to current GSSAPI patch fromColin Watson
http://www.sxw.org.uk/computing/patches/openssh-4.3p2-gsskex-20060223.patch (closes: #352042).
2006-05-12Merge 4.3p2 to the trunk.Colin Watson
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 22:22:43Damien Miller
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h] [bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h] [compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h] [dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c] [gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h] [misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h] [myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h] [scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h] [ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h] [ttymodes.h uidswap.h uuencode.h xmalloc.h] standardise spacing in $OpenBSD$ tags; requested by deraadt@
2005-12-13 - reyk@cvs.openbsd.org 2005/12/06 22:38:28Damien Miller
[auth-options.c auth-options.h channels.c channels.h clientloop.c] [misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h] [serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c] [sshconnect.h sshd.8 sshd_config sshd_config.5] Add support for tun(4) forwarding over OpenSSH, based on an idea and initial channel code bits by markus@. This is a simple and easy way to use OpenSSH for ad hoc virtual private network connections, e.g. administrative tunnels or secure wireless access. It's based on a new ssh channel and works similar to the existing TCP forwarding support, except that it depends on the tun(4) network interface on both ends of the connection for layer 2 or layer 3 tunneling. This diff also adds support for LocalCommand in the ssh(1) client. ok djm@, markus@, jmc@ (manpages), tested and discussed with others
2005-09-14Merge 4.2p1 to the trunk.Colin Watson
2005-06-16 - djm@cvs.openbsd.org 2005/06/08 11:25:09Damien Miller
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5] add ControlMaster=auto/autoask options to support opportunistic multiplexing; tested avsm@ and jakob@, ok markus@