summaryrefslogtreecommitdiff
path: root/regress/test-exec.sh
AgeCommit message (Collapse)Author
2020-04-05upstream: Indicate if we're using a cached key in trace output.dtucker@openbsd.org
OpenBSD-Regress-ID: 409a7b0e59d1272890fda507651c0c3d2d3c0d89
2020-02-01upstream: regress test for sshd_config Include directive; from Jakubdjm@openbsd.org
Jelen OpenBSD-Regress-ID: 0d9224de3297c7a5f51ba68d6e3725a2a9345fa4
2020-01-25upstream: Move setting $NC into test-exec since it's now used bydtucker@openbsd.org
multiple tests, and in -portable we use our own local copy to avoid portability problems. OpenBSD-Regress-ID: ceb78445fcaac317bec2fc51b3f0d9589048c114
2020-01-24upstream: Do not warn about permissions on symlinks.dtucker@openbsd.org
OpenBSD-Regress-ID: 339d4cbae224bd8743ffad9c3afb0cf3cb66c357
2020-01-23upstream: When checking for unsafe directories, ignore non-directoriesdtucker@openbsd.org
(ie symlinks, where permissions are not relevant). OpenBSD-Regress-ID: fb6cfc8b022becb62b2dcb99ed3f072b3326e501
2020-01-23upstream: Check for and warn about StrictModes permission problems. ok tb@dtucker@openbsd.org
OpenBSD-Regress-ID: 4841704ccdee50ee7efc6035bc686695c6ac2991
2020-01-21upstream: pass SSH_SK_HELPER explicitly past $SUDO to avoid it gettingdjm@openbsd.org
cleared; with dtucker@ OpenBSD-Regress-ID: 03178a0580324bf0dff28f7eac6c3edbc5407f8e
2019-12-21upstream: test security key host keys in addition to user keysdjm@openbsd.org
OpenBSD-Regress-ID: 9fb45326106669a27e4bf150575c321806e275b1
2019-11-27upstream: test FIDO2/U2F key types; ok markus@djm@openbsd.org
OpenBSD-Regress-ID: 367e06d5a260407619b4b113ea0bd7004a435474
2019-11-01upstream: skip security-key key types for tests until we have adjm@openbsd.org
dummy U2F middleware to use. OpenBSD-Regress-ID: 37200462b44334a4ad45e6a1f7ad1bd717521a95
2019-07-23Rename valgrind "errors" to "failures".Darren Tucker
When valgrind is enabled, test-exec.sh counts the number of invocations that valgrind detects failures in, not the total number of errors detected. This makes the name to be more accurate.
2019-07-20Skip running sftp-chroot under Valgrind.Darren Tucker
2019-07-19Show when skipping valgrind for a test.Darren Tucker
2019-07-19Enable connect-privsep test with valgrind.Darren Tucker
connect-privsep seems to work OK with valgrind now so don't skip valgrind on it.
2019-07-19Show valgrind results and error counts.Darren Tucker
2019-07-18Fail tests if Valgrind enabled and reports errors.Darren Tucker
Also dump the failing valgrind report to stdout (not the cleanest solution, but better than nothing).
2019-07-18Allow low-priv tests to write to pipe dir.Darren Tucker
When running regression tests with Valgrind and SUDO, the low-priv agent tests need to be able to create pipes in the appropriate directory.
2019-07-17Put valgrind vgdb files to a specific directory.Darren Tucker
Valgrind by default puts vgdb files and pipes under /tmp, however it is not always able to clean them up, which can cause test failures when there's a pid/file collision. Using a specific directory ensures that we can clean up and start clean.
2019-07-15Clear valgrind-out dir to prevent collisions.Darren Tucker
2019-07-15Allow agent tests to write to valgrind dir.Darren Tucker
2019-07-05upstream: Adapt the PuTTY/Conch tests to new key names.dtucker@openbsd.org
A recent regress change (2a9b3a2ce411d16cda9c79ab713c55f65b0ec257 in portable) broke the PuTTY and Twisted Conch interop tests, because the key they want to use is now called ssh-rsa rather than rsa. Adapt the tests to the new file names. bz#3020, patch from cjwatson at debian.org. OpenBSD-Regress-ID: fd342a37db4d55aa4ec85316f73082c8eb96e64e
2019-03-28drop old Cygwin considerationsCorinna Vinschen
- Cygwin supports non-DOS characters in filenames - Cygwin does not support Windows XP anymore Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
2019-01-27upstream: Generate all key supported key types and enable for keyscandtucker@openbsd.org
test. OpenBSD-Regress-ID: 72f72ff49946c61bc949e1692dd9e3d71370891b
2018-08-23shorten temporary SSH_REGRESS_TMP pathDamien Miller
Previous path was exceeding max socket length on at least one platform (OSX)
2018-08-10upstream: The script that cooks up PuTTY format host keys does notdtucker@openbsd.org
understand the new key format so convert back to old format to create the PuTTY key and remove it once done. OpenBSD-Regress-ID: 2a449a18846c3a144bc645135b551ba6177e38d3
2018-07-20Create control sockets in clean temp directoriesDamien Miller
Adds a regress/mkdtemp tool and uses it to create empty temp directories for tests needing control sockets. Patch from Colin Watson via bz#2660; ok dtucker
2018-07-11VALGRIND_CHECK_LEAKS logic was backwards :(Damien Miller
2018-07-11disable valgrind memleak checking by defaultDamien Miller
Add VALGRIND_CHECK_LEAKS knob to turn it back on.
2018-06-01upstream: Add TEST_SSH_FAIL_FATAL variable, to force all failuresdjm@openbsd.org
to instantly abort the test. Useful in capturing clean logs for individual failure cases. OpenBSD-Regress-ID: feba18cf338c2328b9601bd4093cabdd9baa3af1
2018-03-23Provide $OBJ to paths in PuTTY interop tests.Darren Tucker
2018-03-23upstream: Tell puttygen to use /dev/urandom instead of /dev/random. Ondtucker@openbsd.org
OpenBSD they are both non-blocking, but on many other -portable platforms it blocks, stalling tests. OpenBSD-Regress-ID: 397d0d4c719c353f24d79f5b14775e0cfdf0e1cc
2017-09-18upstream commitdtucker@openbsd.org
Don't call fatal from stop_sshd since it calls cleanup which calls stop_sshd which will probably fail in the same way. Instead, just bail. Differentiate between sshd dying without cleanup and not shutting down. Upstream-Regress-ID: f97315f538618b349e2b0bea02d6b0c9196c6bc4
2017-05-01upstream commitdjm@openbsd.org
eliminate explicit specification of protocol in tests and loops over protocol. We only support SSHv2 now. Upstream-Regress-ID: 0082838a9b8a382b7ee9cbf0c1b9db727784fadd
2017-02-17upstream commitdtucker@openbsd.org
Remove deprecated SSH1 options RSAAuthentication and RhostsRSAAuthentication from regression test sshd_config. Upstream-Regress-ID: 8066b753d9dce7cf02ff87af5c727ff680d99491
2016-12-16upstream commitdtucker@openbsd.org
Move the "stop sshd" code into its own helper function. Patch from Zev Weiss <zev at bewilderbeest.net>, ok djm@ Upstream-Regress-ID: a113dea77df5bd97fb4633ea31f3d72dbe356329
2016-11-29upstream commitdtucker@openbsd.org
Allow PuTTY interop tests to run unattended. bz#2639, patch from cjwatson at debian.org. Upstream-Regress-ID: 4345253558ac23b2082aebabccd48377433b6fe0
2016-11-29upstream commitdtucker@openbsd.org
Reverse args to sshd-log-wrapper. Matches change in portable, where it allows sshd do be optionally run under Valgrind. Upstream-Regress-ID: b438d1c6726dc5caa2a45153e6103a0393faa906
2016-11-29upstream commitdtucker@openbsd.org
Fix typo in trace message; from portable. Upstream-Regress-ID: 4c4a2ba0d37faf5fd230a91b4c7edb5699fbd73a
2016-08-23upstream commitdjm@openbsd.org
remove Protocol directive from client/server configs that causes spammy deprecation warnings hardcode SSH_PROTOCOLS=2, since that's all we support on the server now (the client still may support both, so it could get confused) Upstream-Regress-ID: c16662c631af51633f9fd06aca552a70535de181
2016-04-15upstream commitdjm@openbsd.org
missing bit of Include regress Upstream-Regress-ID: 1063595f7f40f8489a1b7a27230b9e8acccea34f
2016-04-15upstream commitdjm@openbsd.org
add test knob and warning for StrictModes Upstream-Regress-ID: 8cd10952ce7898655ee58945904f2a0a3bdf7682
2015-04-07Fix misspellings of regress CONFOPTS env variables.Darren Tucker
Patch from Bryan Drewery.
2015-03-16portability fix: Solaris systems may not have a grep that understands -qTim Rice
2015-03-05upstream commitmarkus@openbsd.org
make it possible to run tests w/o ssh1 support; ok djm@
2015-02-26valgrind supportDamien Miller
2014-07-09 - djm@cvs.openbsd.org 2014/07/06 07:42:03Damien Miller
[multiplex.sh test-exec.sh] add a hook to the cleanup() function to kill $SSH_PID if it is set use it to kill the mux master started in multiplex.sh (it was being left around on fatal failures)
2013-11-09 - dtucker@cvs.openbsd.org 2013/11/09 05:41:34Darren Tucker
[regress/test-exec.sh regress/rekey.sh] Use smaller test data files to speed up tests. Grow test datafiles where necessary for a specific test.
2013-08-08 - (dtucker) [regress/Makefile regress/test-exec.sh] Roll back the -ntDarren Tucker
removal. The "make clean" removes modpipe which is built by the top-level directory before running the tests. Spotted by tim@
2013-08-08 - (dtucker) [regress/Makefile regress/test-exec.sh] Don't try to use test -ntDarren Tucker
since some platforms (eg really old FreeBSD) don't have it. Instead, run "make clean" before a complete regress run. ok djm.
2013-07-25 - djm@cvs.openbsd.org 2013/06/21 02:26:26Damien Miller
[regress/sftp-cmds.sh regress/test-exec.sh] unbreak sftp-cmds for renamed test data (s/ls/data/)