| Age | Commit message (Collapse) | Author |
|---|
|
Switch to recallocarray() for a few operations. Both
growth and shrinkage are handled safely, and there also is no need for
preallocation dances. Future changes in this area will be less error prone.
Review and one bug found by markus
Upstream-ID: 822d664d6a5a1d10eccb23acdd53578a679d5065
|
|
remove options -12 from usage();
Upstream-ID: db7ceef25132e63b50ed05289bf447fece1d1270
|
|
|
|
exterminate the -1 flag from scp
ok markus@
Upstream-ID: 26d247f7065da15056b209cef5f594ff591b89db
|
|
Avoid relying on implementation-specific behavior when
detecting whether the timestamp or file size overflowed. If time_t and off_t
are not either 32-bit or 64-bit scp will exit with an error. OK djm@
Upstream-ID: f31caae73ddab6df496b7bbbf7da431e267ad135
|
|
Avoid potential signed int overflow when parsing the file
size. Use strtoul() instead of parsing manually. OK djm@
Upstream-ID: 1f82640861c7d905bbb05e7d935d46b0419ced02
|
|
Turkish locales are unique in their handling of the letters 'i' and
'I' (yes, they are different letters) and OpenSSH isn't remotely
prepared to deal with that. For now, the best we can do is to force
OpenSSH to use the C/POSIX locale and try to preserve the UTF-8
encoding if possible.
ok dtucker@
|
|
Add MAXIMUM(), MINIMUM(), and ROUNDUP() to misc.h, then
use those definitions rather than pulling <sys/param.h> and unknown namespace
pollution. ok djm markus dtucker
Upstream-ID: 712cafa816c9f012a61628b66b9fbd5687223fb8
|
|
To prevent screwing up terminal settings when printing to
the terminal, for ASCII and UTF-8, escape bytes not forming characters and
bytes forming non-printable characters with vis(3) VIS_OCTAL. For other
character sets, abort printing of the current string in these cases. In
particular, * let scp(1) respect the local user's LC_CTYPE locale(1); *
sanitize data received from the remote host; * sanitize filenames, usernames,
and similar data even locally; * take character display widths into account
for the progressmeter.
This is believed to be sufficient to keep the local terminal safe
on OpenBSD, but bad things can still happen on other systems with
state-dependent locales because many places in the code print
unencoded ASCII characters into the output stream.
Using feedback from djm@ and martijn@,
various aspects discussed with many others.
deraadt@ says it should go in now, i probably already hesitated too long
Upstream-ID: e66afbc94ee396ddcaffd433b9a3b80f387647e0
|
|
Improve accuracy of reported transfer speeds by waiting
for the ack from the other end. Pointed out by mmcc@, ok deraadt@ markus@
Upstream-ID: 99f1cf15c9a8f161086b814d414d862795ae153d
|
|
pledge "stdio rpath wpath cpath fattr tty proc exec"
except for the -p option (which sadly has insane semantics...) ok semarie
dtucker
Upstream-ID: 8854bbd58279abe00f6c33f8094bdc02c8c65059
|
|
0 -> NULL when comparing with a char*.
ok dtucker@, djm@.
Upstream-ID: a928e9c21c0a9020727d99738ff64027c1272300
|
|
rename xrealloc() to xreallocarray() since it follows
that form. ok djm
|
|
Replace <sys/param.h> with <limits.h> and other less
dirty headers where possible. Annotate <sys/param.h> lines with their
current reasons. Switch to PATH_MAX, NGROUPS_MAX, HOST_NAME_MAX+1,
LOGIN_NAME_MAX, etc. Change MIN() and MAX() to local definitions of
MINIMUM() and MAXIMUM() where sensible to avoid pulling in the pollution.
These are the files confirmed through binary verification. ok guenther,
millert, doug (helped with the verification protocol)
|
|
[scp.c]
when copying local->remote fails during read, don't send uninitialised
heap to the remote end. Reported by Jann Horn
|
|
[scp.c]
unsigned casts for ctype macros where neccessary
ok guenther millert markus
|
|
[scp.c]
improved time_t overflow check suggested by guenther@
|
|
[scp.c]
make this -Wsign-compare clean after time_t conversion
|
|
[scp.c]
Handle time_t values as long long's when formatting them and when
parsing them from remote servers.
Improve error checking in parsing of 'T' lines.
ok dtucker@ deraadt@
|
|
[scp.c]
use MAXPATHLEN for buffer size instead of fixed value. ok markus
|
|
[scp.c sftp-client.c]
Replace S_IWRITE, which isn't standardized, with S_IWUSR, which is. Patch
from Nathan Osman via bz#2113. ok deraadt.
(note: corrected bug number from 2085)
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
[log.c scp.c sshd.c serverloop.c schnorr.c sftp.c]
Fix some "unused result" warnings found via clang and -portable.
ok markus@
|
|
[openbsd-compat/vis.h] FreeBSD's strnvis isn't compatible with OpenBSD's
so mark it as broken. Patch from des AT des.no
|
|
[scp.c]
suppress adding '--' to remote commandlines when the first argument
does not start with '-'. saves breakage on some difficult-to-upgrade
embedded/router platforms; feedback & ok dtucker ok markus
|
|
[scp.1 scp.c]
scp.1: grammer fix
scp.c: add -3 to usage()
|
|
[scp.1 scp.c]
add a new -3 option to scp: Copies between two remote hosts are
transferred through the local host. Without this option the data
is copied directly between the two remote hosts. ok djm@ (bugzilla #1837)
|
|
[scp.c]
Pass through ssh command-line flags and options when doing remote-remote
transfers, e.g. to enable agent forwarding which is particularly useful
in this case; bz#1837 ok dtucker@
|
|
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
[sftp-client.h sftp.1 sftp.c]
add an option per-read/write callback to atomicio
factor out bandwidth limiting code from scp(1) into a generic bandwidth
limiter that can be attached using the atomicio callback mechanism
add a bandwidth limit option to sftp(1) using the above
"very nice" markus@
|
|
[scp.c]
Fix a longstanding problem where if you suspend scp at the
password/passphrase prompt the terminal mode is not restored.
OK djm@
|
|
[ssh.c sftp.c scp.c]
When passing user-controlled options with arguments to other programs,
pass the option and option argument as separate argv entries and
not smashed into one (e.g., as -l foo and not -lfoo). Also, always
pass a "--" argument to stop option parsing, so that a positional
argument that starts with a '-' isn't treated as an option. This
fixes some error cases as well as the handling of hostnames and
filenames that start with a '-'.
Based on a diff by halex@
ok halex@ djm@ deraadt@
|
|
[scp.c]
spelling in comment; ok djm@
|
|
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c]
[sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on
some platforms (HP nonstop) it is a distinct errno;
bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
|
|
[scp.c]
Prevent -Wsign-compare warnings on LP64 systems. bz #1192, ok deraadt@
|
|
by vinschen at redhat.com.
|
|
|
|
[scp.c]
If scp -p encounters a pre-epoch timestamp, use the epoch which is
as close as we can get given that it's used unsigned. Add a little
debugging while there. bz #828, ok djm@
|
|
leftover debug code.
|
|
[scp.c]
factor out network read/write into an atomicio()-like function, and
use it to handle short reads, apply bandwidth limits and update
counters. make network IO non-blocking, so a small trickle of
reads/writes has a chance of updating the progress meter; bz #799
ok dtucker@
|
|
[scp.1 scp.c]
the ellipsis is not an optional argument; while here, sync the usage
and synopsis of commands
lots of good ideas by jmc@
ok jmc@
|
|
[scp.c]
don't ftruncate() non-regular files; bz#1236 reported by wood AT
xmission.com; ok dtucker@
|
|
[scp.c]
Encode filename with strnvis if the name contains a newline (which can't
be represented in the scp protocol), from bz #891. ok markus@
|
|
[scp.c]
make scp try to skip FIFOs rather than blocking when nothing is listening.
depends on the platform supporting sane O_NONBLOCK semantics for open
on FIFOs (apparently POSIX does not mandate this), which OpenBSD does.
bz #856; report by cjwatson AT debian.org; ok markus@
|
|
[scp.c]
fix detection of whether we should show progress meter or not: scp
tested isatty(stderr) but wrote the progress meter to stdout. This patch
makes it test stdout. bz#1265 reported by junkmail AT bitsculpture.com;
of dtucker@
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c]
[hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c]
[scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c]
[sshconnect1.c sshd.c xmalloc.c]
move #include <stdlib.h> out of includes.h
|
|
[atomicio.c auth.c dh.c authfile.c buffer.c clientloop.c kex.c]
[groupaccess.c gss-genr.c kexgexs.c misc.c monitor.c monitor_mm.c]
[packet.c scp.c serverloop.c session.c sftp-client.c sftp-common.c]
[sftp-server.c sftp.c ssh-add.c ssh-agent.c ssh-keygen.c sshlogin.c]
[uidswap.c xmalloc.c]
move #include <sys/param.h> out of includes.h
|
|
[channels.c clientloop.c packet.c scp.c serverloop.c sftp-client.c]
[sftp-server.c ssh-agent.c ssh-keyscan.c sshconnect.c sshd.c]
move #include <sys/time.h> out of includes.h
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
