summaryrefslogtreecommitdiff
path: root/servconf.c
AgeCommit message (Collapse)Author
2019-03-08upstream: Move checks for lists of users or groups into their owndtucker@openbsd.org
function. This is a no-op on OpenBSD but will make things easier in -portable, eg on systems where these checks should be case-insensitive. ok djm@ OpenBSD-Commit-ID: 8bc9c8d98670e23f8eaaaefe29c1f98e7ba0487e
2019-02-22Cygwin: implement case-insensitive Unicode user and group name matchingCorinna Vinschen
The previous revert enabled case-insensitive user names again. This patch implements the case-insensitive user and group name matching. To allow Unicode chars, implement the matcher using wchar_t chars in Cygwin-specific code. Keep the generic code changes as small as possible. Cygwin: implement case-insensitive Unicode user and group name matching Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
2019-02-22Revert unintended parts of previous commit.Darren Tucker
2019-02-22Revert "[auth.c] On Cygwin, refuse usernames that have differences in case"Corinna Vinschen
This reverts commit acc9b29486dfd649dfda474e5c1a03b317449f1c. Signed-off-by: Corinna Vinschen <vinschen@redhat.com>
2019-01-24upstream: Always initialize 2nd arg to hpdelim2. It populates thatdtucker@openbsd.org
*ONLY IF* there's a delimiter. If there's not (the common case) it checked uninitialized memory, which usually passed, but if not would cause spurious failures when the uninitialized memory happens to contain "/". ok deraadt. OpenBSD-Commit-ID: 4291611eaf2a53d4c92f4a57c7f267c9f944e0d3
2019-01-24upstream: Remove support for obsolete host/port syntax.dtucker@openbsd.org
host/port was added in 2001 as an alternative to host:port syntax for the benefit of IPv6 users. These days there are establised standards for this like [::1]:22 and the slash syntax is easily mistaken for CIDR notation, which OpenSSH now supports for some things. Remove the slash notation from ListenAddress and PermitOpen. bz#2335, patch from jjelen at redhat.com, ok markus@ OpenBSD-Commit-ID: fae5f4e23c51a368d6b2d98376069ac2b10ad4b7
2019-01-20upstream: convert servconf.c to new packet APIdjm@openbsd.org
with & ok markus@ OpenBSD-Commit-ID: 126553aecca302c9e02fd77e333b9cb217e623b4
2019-01-20upstream: begin landing remaining refactoring of packet parsingdjm@openbsd.org
API, started almost exactly six years ago. This change stops including the old packet_* API by default and makes each file that requires the old API include it explicitly. We will commit file-by-file refactoring to remove the old API in consistent steps. with & ok markus@ OpenBSD-Commit-ID: 93c98a6b38f6911fd1ae025a1ec57807fb4d4ef4
2018-11-19upstream: silence (to log level debug2) failure messages whendjm@openbsd.org
loading the default hostkeys. Hostkeys explicitly specified in the configuration or on the command-line are still reported as errors, and failure to load at least one host key remains a fatal error. MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Based on patch from Dag-Erling Smørgrav via https://github.com/openssh/openssh-portable/pull/103 ok markus@ OpenBSD-Commit-ID: ffc2e35a75d1008effaf05a5e27425041c27b684
2018-11-16upstream: use path_absolute() for pathname checks; from Manoj Ampalamdjm@openbsd.org
OpenBSD-Commit-ID: 482ce71a5ea5c5f3bc4d00fd719481a6a584d925
2018-09-21upstream: actually make CASignatureAlgorithms available as a configdjm@openbsd.org
option OpenBSD-Commit-ID: 93fa7ff58314ed7b1ab7744090a6a91232e6ae52
2018-09-20upstream: Add sshd_config CASignatureAlgorithms option to allowdjm@openbsd.org
control over which signature algorithms a CA may use when signing certificates. In particular, this allows a sshd to ban certificates signed with RSA/SHA1. ok markus@ OpenBSD-Commit-ID: b05c86ef8b52b913ed48d54a9b9c1a7714d96bac
2018-08-13upstream: better diagnosics on alg list assembly errors; okdjm@openbsd.org
deraadt@ markus@ OpenBSD-Commit-ID: 5a557e74b839daf13cc105924d2af06a1560faee
2018-07-31Remove support for S/KeyDamien Miller
Most people will 1) be using modern multi-factor authentication methods like TOTP/OATH etc and 2) be getting support for multi-factor authentication via PAM or BSD Auth.
2018-07-12upstream: remove legacy key emulation layer; ok djm@markus@openbsd.org
OpenBSD-Commit-ID: 2b1f9619259e222bbd4fe9a8d3a0973eafb9dd8d
2018-07-10upstream: sshd: switch config to sshbuf API; ok djm@markus@openbsd.org
OpenBSD-Commit-ID: 72b02017bac7feac48c9dceff8355056bea300bd
2018-07-10upstream: Revert previous two commitssf@openbsd.org
It turns out we still support pre-auth compression on the client. Therefore revert the previous two commits: date: 2018/07/06 09:06:14; author: sf; commitid: yZVYKIRtUZWD9CmE; Rename COMP_DELAYED to COMP_ZLIB Only delayed compression is supported nowadays. ok markus@ date: 2018/07/06 09:05:01; author: sf; commitid: rEGuT5UgI9f6kddP; Remove leftovers from pre-authentication compression Support for this has been removed in 2016. COMP_DELAYED will be renamed in a later commit. ok markus@ OpenBSD-Commit-ID: cdfef526357e4e1483c86cf599491b2dafb77772
2018-07-10upstream: Rename COMP_DELAYED to COMP_ZLIBsf@openbsd.org
Only delayed compression is supported nowadays. ok markus@ OpenBSD-Commit-ID: 5b1dbaf3d9a4085aaa10fec0b7a4364396561821
2018-07-04upstream: repair PubkeyAcceptedKeyTypes (and friends) after RSAdjm@openbsd.org
signature work - returns ability to add/remove/specify algorithms by wildcard. Algorithm lists are now fully expanded when the server/client configs are finalised, so errors are reported early and the config dumps (e.g. "ssh -G ...") now list the actual algorithms selected. Clarify that, while wildcards are accepted in algorithm lists, they aren't full pattern-lists that support negation. (lots of) feedback, ok markus@ OpenBSD-Commit-ID: a8894c5c81f399a002f02ff4fe6b4fa46b1f3207
2018-07-03upstream: allow sshd_config PermitUserEnvironment to accept adjm@openbsd.org
pattern-list of whitelisted environment variable names in addition to yes|no. bz#1800, feedback and ok markus@ OpenBSD-Commit-ID: 77dc2b468e0bf04b53f333434ba257008a1fdf24
2018-06-19upstream: allow bare port numbers to appear in PermitListen directives,djm@openbsd.org
e.g. PermitListen 2222 8080 is equivalent to: PermitListen *:2222 *:8080 Some bonus manpage improvements, mostly from markus@ "looks fine" markus@ OpenBSD-Commit-ID: 6546b0cc5aab7f53d65ad0a348ca0ae591d6dd24
2018-06-09upstream: add a SetEnv directive for sshd_config to allow andjm@openbsd.org
administrator to explicitly specify environment variables set in sessions started by sshd. These override the default environment and any variables set by user configuration (PermitUserEnvironment, etc), but not the SSH_* variables set by sshd itself. ok markus@ OpenBSD-Commit-ID: b6a96c0001ccd7dd211df6cae9e961c20fd718c0
2018-06-07upstream: switch config file parsing to getline(3) as this avoidsmarkus@openbsd.org
static limits noted by gerhard@; ok dtucker@, djm@ OpenBSD-Commit-ID: 6d702eabef0fa12e5a1d75c334a8c8b325298b5c
2018-06-07upstream: permitlisten option for authorized_keys; ok markus@djm@openbsd.org
OpenBSD-Commit-ID: 8650883018d7aa893173d703379e4456a222c672
2018-06-07upstream: Add a PermitListen directive to control which server-sidedjm@openbsd.org
addresses may be listened on when the client requests remote forwarding (ssh -R). This is the converse of the existing PermitOpen directive and this includes some refactoring to share much of its implementation. feedback and ok markus@ OpenBSD-Commit-ID: 15a931238c61a3f2ac74ea18a98c933e358e277f
2018-04-10upstream: lots of typos in comments/docs. Patch from Karsten Weissdjm@openbsd.org
after checking with codespell tool (https://github.com/lucasdemarchi/codespell) OpenBSD-Commit-ID: 373222f12d7ab606598a2d36840c60be93568528
2018-04-06upstream: Update default IPQoS in ssh(1), sshd(8) to DSCP AF21 forjob@openbsd.org
interactive and CS1 for bulk AF21 was selected as this is the highest priority within the low-latency service class (and it is higher than what we have today). SSH is elastic and time-sensitive data, where a user is waiting for a response via the network in order to continue with a task at hand. As such, these flows should be considered foreground traffic, with delays or drops to such traffic directly impacting user-productivity. For bulk SSH traffic, the CS1 "Lower Effort" marker was chosen to enable networks implementing a scavanger/lower-than-best effort class to discriminate scp(1) below normal activities, such as web surfing. In general this type of bulk SSH traffic is a background activity. An advantage of using "AF21" for interactive SSH and "CS1" for bulk SSH is that they are recognisable values on all common platforms (IANA https://www.iana.org/assignments/dscp-registry/dscp-registry.xml), and for AF21 specifically a definition of the intended behavior exists https://tools.ietf.org/html/rfc4594#section-4.7 in addition to the definition of the Assured Forwarding PHB group https://tools.ietf.org/html/rfc2597, and for CS1 (Lower Effort) there is https://tools.ietf.org/html/rfc3662 The first three bits of "AF21" map to the equivalent IEEEE 802.1D PCP, IEEE 802.11e, MPLS EXP/CoS and IP Precedence value of 2 (also known as "Immediate", or "AC_BE"), and CS1's first 3 bits map to IEEEE 802.1D PCP, IEEE 802.11e, MPLS/CoS and IP Precedence value 1 ("Background" or "AC_BK"). OK deraadt@, "no objection" djm@ OpenBSD-Commit-ID: d11d2a4484f461524ef0c20870523dfcdeb52181
2018-03-02upstream: missing #ifdef for _PATH_HOST_XMSS_KEY_FILE; report bymarkus@openbsd.org
jmc@ OpenBSD-Commit-ID: 9039cb69a3f9886bfef096891a9e7fcbd620280b
2018-02-26upstream: Add experimental support for PQC XMSS keys (Extendedmarkus@openbsd.org
Hash-Based Signatures) The code is not compiled in by default (see WITH_XMSS in Makefile.inc) Joint work with stefan-lukas_gazdag at genua.eu See https://tools.ietf.org/html/draft-irtf-cfrg-xmss-hash-based-signatures-12 ok djm@ OpenBSD-Commit-ID: ef3eccb96762a5d6f135d7daeef608df7776a7ac
2018-02-16upstream: stop loading DSA keys by default, remove sshd_configdjm@openbsd.org
stanza and manpage bits; from Colin Watson via bz#2662, ok dtucker@ OpenBSD-Commit-ID: d33a849f481684ff655c140f5eb1b4acda8c5c09
2018-02-09upstream commitdtucker@openbsd.org
Remove unused sKerberosTgtPassing from enum. From calestyo via github pull req #11, ok djm@ OpenBSD-Commit-ID: 1008f8870865a7c4968b7aed402a0a9e3e5b9540
2017-12-07upstream commitdtucker@openbsd.org
Replace atoi and strtol conversions for integer arguments to config keywords with a checking wrapper around strtonum. This will prevent and flag invalid and negative arguments to these keywords. ok djm@ OpenBSD-Commit-ID: 99ae3981f3d608a219ccb8d2fff635ae52c17998
2017-12-07upstream commitdtucker@openbsd.org
Add missing break for rdomain. Prevents spurious "Deprecated option" warnings. ok djm@ OpenBSD-Commit-ID: ba28a675d39bb04a974586241c3cba71a9c6099a
2017-11-03upstream commitdjm@openbsd.org@openbsd.org
reuse parse_multistate for parse_flag (yes/no arguments). Saves a few lines of code and makes the parser more consistent wrt case- sensitivity. bz#2664 ok dtucker@ OpenBSD-Commit-ID: b2ad1b6086858d5db71c7b11e5a74dba6d60efef
2017-11-03upstream commitdtucker@openbsd.org@openbsd.org
When doing a config test with sshd -T, only require the attributes that are actually used in Match criteria rather than (an incomplete list of) all criteria. ok djm@, man page help jmc@ OpenBSD-Commit-ID: b4e773c4212d3dea486d0259ae977551aab2c1fc
2017-10-27fix rdomain compilation errorsDamien Miller
2017-10-25upstream commitdjm@openbsd.org
uninitialised variable in PermitTunnel printing code Upstream-ID: f04dc33e42855704e116b8da61095ecc71bc9e9a
2017-10-25provide hooks and fallbacks for rdomain supportDamien Miller
2017-10-25upstream commitdjm@openbsd.org
add a "rdomain" criteria for the sshd_config Match keyword to allow conditional configuration that depends on which rdomain(4) a connection was recevied on. ok markus@ Upstream-ID: 27d8fd5a3f1bae18c9c6e533afdf99bff887a4fb
2017-10-25upstream commitdjm@openbsd.org
add sshd_config RDomain keyword to place sshd and the subsequent user session (including the shell and any TCP/IP forwardings) into the specified rdomain(4) ok markus@ Upstream-ID: be2358e86346b5cacf20d90f59f980b87d1af0f5
2017-10-25upstream commitdjm@openbsd.org
Add optional rdomain qualifier to sshd_config's ListenAddress option to allow listening on a different rdomain(4), e.g. ListenAddress 0.0.0.0 rdomain 4 Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
2017-10-20upstream commitdjm@openbsd.org
replace statically-sized arrays in ServerOptions with dynamic ones managed by xrecallocarray, removing some arbitrary (though large) limits and saving a bit of memory; "much nicer" markus@ Upstream-ID: 1732720b2f478fe929d6687ac7b0a97ff2efe9d2
2017-10-05upstream commitdjm@openbsd.org
fix (another) problem in PermitOpen introduced during the channels.c refactor: the third and subsequent arguments to PermitOpen were being silently ignored; ok markus@ Upstream-ID: 067c89f1f53cbc381628012ba776d6861e6782fd
2017-10-03upstream commitdjm@openbsd.org
Fix PermitOpen crash; spotted by benno@, ok dtucker@ deraadt@ Upstream-ID: c2cc84ffac070d2e1ff76182c70ca230a387983c
2017-09-19upstream commitdtucker@openbsd.org
Add braces missing after channels refactor. ok markus@ Upstream-ID: 72ab325c84e010680dbc88f226e2aa96b11a3980
2017-09-12upstream commitdjm@openbsd.org
refactor channels.c Move static state to a "struct ssh_channels" that is allocated at runtime and tracked as a member of struct ssh. Explicitly pass "struct ssh" to all channels functions. Replace use of the legacy packet APIs in channels.c. Rework sshd_config PermitOpen handling: previously the configuration parser would call directly into the channels layer. After the refactor this is not possible, as the channels structures are allocated at connection time and aren't available when the configuration is parsed. The server config parser now tracks PermitOpen itself and explicitly configures the channels code later. ok markus@ Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
2017-06-24upstream commitdjm@openbsd.org
refactor authentication logging optionally record successful auth methods and public credentials used in a file accessible to user sessions feedback and ok markus@ Upstream-ID: 090b93036967015717b9a54fd0467875ae9d32fb
2017-05-17upstream commitdjm@openbsd.org
allow LogLevel in sshd_config Match blocks; ok dtucker bz#2717 Upstream-ID: 662e303be63148f47db1aa78ab81c5c2e732baa8
2017-04-28upstream commitjsg@openbsd.org
remove a static array unused since rev 1.306 spotted by clang ok djm@ Upstream-ID: 249b3eed2446f6074ba2219ccc46919dd235a7b8
2017-03-15upstream commitdjm@openbsd.org
Mark the sshd_config UsePrivilegeSeparation option as deprecated, effectively making privsep mandatory in sandboxing mode. ok markus@ deraadt@ (note: this doesn't remove the !privsep code paths, though that will happen eventually). Upstream-ID: b4c52666256c4dd865f8ce9431af5d6ce2d74a0a
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-15 06:53:52 +0000