| Age | Commit message (Collapse) | Author |
|---|
|
that I was able to get all the portable bits in the right location. As for
the SKEY comment there is an email out to Markus as to how it should be
resolved. Until then I just #ifdef SKEY/#endif out the whole block.
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/18 16:20:21
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1 ssh.h
sshd.8 sshd.c]
log() is at pri=LOG_INFO, since LOG_NOTICE goes to /dev/console on many
systems
- markus@cvs.openbsd.org 2001/01/18 16:59:59
[auth-passwd.c auth.c auth.h auth1.c auth2.c serverloop.c session.c
session.h sshconnect1.c]
1) removes fake skey from sshd, since this will be much
harder with /usr/libexec/auth/login_XXX
2) share/unify code used in ssh-1 and ssh-2 authentication (server side)
3) make addition of BSD_AUTH and other challenge reponse methods
easier.
- markus@cvs.openbsd.org 2001/01/18 17:12:43
[auth-chall.c auth2-chall.c]
rename *-skey.c *-chall.c since the files are not skey specific
|
|
- markus@cvs.openbsd.org 2001/01/08 22:29:05
[auth2.c compat.c compat.h servconf.c servconf.h sshd.8
sshd_config version.h]
implement option 'Banner /etc/issue.net' for ssh2, move version to
2.3.1 (needed for bugcompat detection, 2.3.0 would fail if Banner
is enabled).
- markus@cvs.openbsd.org 2001/01/08 22:03:23
[channels.c ssh-keyscan.c]
O_NDELAY -> O_NONBLOCK; thanks stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/08 21:55:41
[sshconnect1.c]
more cleanups and fixes from stevesk@pobox.com:
1) try_agent_authentication() for loop will overwrite key just
allocated with key_new(); don't alloc
2) call ssh_close_authentication_connection() before exit
try_agent_authentication()
3) free mem on bad passphrase in try_rsa_authentication()
- markus@cvs.openbsd.org 2001/01/08 21:48:17
[kex.c]
missing free; thanks stevesk@pobox.com
|
|
- (bal) Fixed another typo in cli.c
- (bal) OpenBSD Sync
- markus@cvs.openbsd.org 2001/01/07 21:26:55
[cli.c]
typo
- markus@cvs.openbsd.org 2001/01/07 21:26:55
[cli.c]
missing free, stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/07 19:06:25
[auth1.c]
missing free, stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/07 11:28:04
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1
ssh.h sshd.8 sshd.c]
rename SYSLOG_LEVEL_INFO->SYSLOG_LEVEL_NOTICE
syslog priority changes:
fatal() LOG_ERR -> LOG_CRIT
log() LOG_INFO -> LOG_NOTICE
|
|
And I think I have all the bits right from the OpenBSD tree.
20001222
- Updated RCSID for pty.c
- (bal) OpenBSD CVS Updates:
- markus@cvs.openbsd.org 2000/12/21 15:10:16
[auth-rh-rsa.c hostfile.c hostfile.h sshconnect.c]
print keyfile:line for changed hostkeys, for deraadt@, ok deraadt@
- markus@cvs.openbsd.org 2000/12/20 19:26:56
[authfile.c]
allow ssh -i userkey for root
- markus@cvs.openbsd.org 2000/12/20 19:37:21
[authfd.c authfd.h kex.c sshconnect2.c sshd.c uidswap.c uidswap.h]
fix prototypes; from stevesk@pobox.com
- markus@cvs.openbsd.org 2000/12/20 19:32:08
[sshd.c]
init pointer to NULL; report from Jan.Ivan@cern.ch
- markus@cvs.openbsd.org 2000/12/19 23:17:54
[auth-krb4.c auth-options.c auth-options.h auth-rhosts.c auth-rsa.c
auth1.c auth2-skey.c auth2.c authfd.c authfd.h authfile.c bufaux.c
bufaux.h buffer.c canohost.c channels.c clientloop.c compress.c
crc32.c deattack.c getput.h hmac.c hmac.h hostfile.c kex.c kex.h
key.c key.h log.c login.c match.c match.h mpaux.c mpaux.h packet.c
packet.h radix.c readconf.c rsa.c scp.c servconf.c servconf.h
serverloop.c session.c sftp-server.c ssh-agent.c ssh-dss.c ssh-dss.h
ssh-keygen.c ssh-keyscan.c ssh-rsa.c ssh-rsa.h ssh.c ssh.h uuencode.c
uuencode.h sshconnect1.c sshconnect2.c sshd.c tildexpand.c]
replace 'unsigned bla' with 'u_bla' everywhere. also replace 'char
unsigned' with u_char.
|
|
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
|
|
- markus@cvs.openbsd.org 2000/10/14 04:01:15
[cipher.c]
debug3
- markus@cvs.openbsd.org 2000/10/14 04:07:23
[scp.c]
remove spaces from arguments; from djm@mindrot.org
- markus@cvs.openbsd.org 2000/10/14 06:09:46
[ssh.1]
Cipher is for SSH-1 only
- markus@cvs.openbsd.org 2000/10/14 06:12:09
[servconf.c servconf.h serverloop.c session.c sshd.8]
AllowTcpForwarding; from naddy@
- markus@cvs.openbsd.org 2000/10/14 06:16:56
[auth2.c compat.c compat.h sshconnect2.c version.h]
OpenSSH_2.3; note that is is not complete, but the version number
needs to be changed for interoperability reasons
- markus@cvs.openbsd.org 2000/10/14 06:19:45
[auth-rsa.c]
do not send RSA challenge if key is not allowed by key-options; from
eivind@ThinkSec.com
- markus@cvs.openbsd.org 2000/10/15 08:14:01
[rijndael.c session.c]
typos; from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2000/10/15 08:18:31
[rijndael.c]
typo
- Copy manpages back over from OpenBSD - too tedious to wade through diffs
|
|
- markus@cvs.openbsd.org 2000/09/30 10:27:44
[log.c]
allow loglevel debug
- markus@cvs.openbsd.org 2000/10/03 11:59:57
[packet.c]
hmac->mac
- markus@cvs.openbsd.org 2000/10/03 12:03:03
[auth-krb4.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth1.c]
move fake-auth from auth1.c to individual auth methods, disables s/key in
debug-msg
- markus@cvs.openbsd.org 2000/10/03 12:16:48
ssh.c
do not resolve canonname, i have no idea why this was added oin ossh
- markus@cvs.openbsd.org 2000/10/09 15:30:44
ssh-keygen.1 ssh-keygen.c
-X now reads private ssh.com DSA keys, too.
- markus@cvs.openbsd.org 2000/10/09 15:32:34
auth-options.c
clear options on every call.
- markus@cvs.openbsd.org 2000/10/09 15:51:00
authfd.c authfd.h
interop with ssh-agent2, from <res@shore.net>
- markus@cvs.openbsd.org 2000/10/10 14:20:45
compat.c
use rexexp for version string matching
- provos@cvs.openbsd.org 2000/10/10 22:02:18
[kex.c kex.h myproposal.h ssh.h ssh2.h sshconnect2.c sshd.c dh.c dh.h]
First rough implementation of the diffie-hellman group exchange. The
client can ask the server for bigger groups to perform the diffie-hellman
in, thus increasing the attack complexity when using ciphers with longer
keys. University of Windsor provided network, T the company.
- markus@cvs.openbsd.org 2000/10/11 13:59:52
[auth-rsa.c auth2.c]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:00:27
[auth-options.h]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:03:27
[scp.1 scp.c]
support 'scp -o' with help from mouring@pconline.com
- markus@cvs.openbsd.org 2000/10/11 14:11:35
[dh.c]
Wall
- markus@cvs.openbsd.org 2000/10/11 14:14:40
[auth.h auth2.c readconf.c readconf.h readpass.c servconf.c servconf.h]
[ssh.h sshconnect2.c sshd_config auth2-skey.c cli.c cli.h]
add support for s/key (kbd-interactive) to ssh2, based on work by
mkiernan@avantgo.com and me
- markus@cvs.openbsd.org 2000/10/11 14:27:24
[auth.c auth1.c auth2.c authfile.c cipher.c cipher.h kex.c kex.h]
[myproposal.h packet.c readconf.c session.c ssh.c ssh.h sshconnect1.c]
[sshconnect2.c sshd.c]
new cipher framework
- markus@cvs.openbsd.org 2000/10/11 14:45:21
[cipher.c]
remove DES
- markus@cvs.openbsd.org 2000/10/12 03:59:20
[cipher.c cipher.h sshconnect1.c sshconnect2.c sshd.c]
enable DES in SSH-1 clients only
- markus@cvs.openbsd.org 2000/10/12 08:21:13
[kex.h packet.c]
remove unused
- markus@cvs.openbsd.org 2000/10/13 12:34:46
[sshd.c]
Kludge for F-Secure Macintosh < 1.0.2; appro@fy.chalmers.se
- markus@cvs.openbsd.org 2000/10/13 12:59:15
[cipher.c cipher.h myproposal.h rijndael.c rijndael.h]
rijndael/aes support
- markus@cvs.openbsd.org 2000/10/13 13:10:54
[sshd.8]
more info about -V
- markus@cvs.openbsd.org 2000/10/13 13:12:02
[myproposal.h]
prefer no compression
|
|
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
|
|
- markus@cvs.openbsd.org 2000/07/22 03:14:37
[servconf.c servconf.h sshd.8 sshd.c sshd_config]
random early drop; ok theo, niels
- deraadt@cvs.openbsd.org 2000/07/26 11:46:51
[ssh.1]
typo
- deraadt@cvs.openbsd.org 2000/08/01 11:46:11
[sshd.8]
many fixes from pepper@mail.reppep.com
- provos@cvs.openbsd.org 2000/08/01 13:01:42
[Makefile.in util.c aux.c]
rename aux.c to util.c to help with cygwin port
- deraadt@cvs.openbsd.org 2000/08/02 00:23:31
[authfd.c]
correct sun_len; Alexander@Leidinger.net
- provos@cvs.openbsd.org 2000/08/02 10:27:17
[readconf.c sshd.8]
disable kerberos authentication by default
- provos@cvs.openbsd.org 2000/08/02 11:27:05
[sshd.8 readconf.c auth-krb4.c]
disallow kerberos authentication if we can't verify the TGT; from
dugsong@
kerberos authentication is on by default only if you have a srvtab.
- markus@cvs.openbsd.org 2000/08/04 14:30:07
[auth.c]
unused
- markus@cvs.openbsd.org 2000/08/04 14:30:35
[sshd_config]
MaxStartups
- markus@cvs.openbsd.org 2000/08/15 13:20:46
[authfd.c]
cleanup; ok niels@
- markus@cvs.openbsd.org 2000/08/17 14:05:10
[session.c]
cleanup login(1)-like jobs, no duplicate utmp entries
- markus@cvs.openbsd.org 2000/08/17 14:06:34
[session.c sshd.8 sshd.c]
sshd -u len, similar to telnetd
|
|
- provos@cvs.openbsd.org 2000/07/13 16:53:22
[aux.c readconf.c servconf.c ssh.h]
allow multiple whitespace but only one '=' between tokens, bug report from
Ralf S. Engelschall <rse@engelschall.com> but different fix. okay deraadt@
- provos@cvs.openbsd.org 2000/07/13 17:14:09
[clientloop.c]
typo; todd@fries.net
- provos@cvs.openbsd.org 2000/07/13 17:19:31
[scp.c]
close can fail on AFS, report error; from Greg Hudson <ghudson@mit.edu>
- markus@cvs.openbsd.org 2000/07/14 16:59:46
[readconf.c servconf.c]
allow leading whitespace. ok niels
- djm@cvs.openbsd.org 2000/07/14 22:01:38
[ssh-keygen.c ssh.c]
Always create ~/.ssh with mode 700; ok Markus
|
|
- markus@cvs.openbsd.org 2000/06/26 03:22:29
[authfd.c]
cleanup, less cut&paste
- markus@cvs.openbsd.org 2000/06/26 15:59:19
[servconf.c servconf.h session.c sshd.8 sshd.c]
MaxStartups: limit number of unauthenticated connections, work by
theo and me
- deraadt@cvs.openbsd.org 2000/07/05 14:18:07
[session.c]
use no_x11_forwarding_flag correctly; provos ok
- provos@cvs.openbsd.org 2000/07/05 15:35:57
[sshd.c]
typo
- aaron@cvs.openbsd.org 2000/07/05 22:06:58
[scp.1 ssh-agent.1 ssh-keygen.1 sshd.8]
Insert more missing .El directives. Our troff really should identify
these and spit out a warning.
- todd@cvs.openbsd.org 2000/07/06 21:55:04
[auth-rsa.c auth2.c ssh-keygen.c]
clean code is good code
- deraadt@cvs.openbsd.org 2000/07/07 02:14:29
[serverloop.c]
sense of port forwarding flag test was backwards
- provos@cvs.openbsd.org 2000/07/08 17:17:31
[compat.c readconf.c]
replace strtok with strsep; from David Young <dyoung@onthejob.net>
- deraadt@cvs.openbsd.org 2000/07/08 19:21:15
[auth.h]
KNF
- ho@cvs.openbsd.org 2000/07/08 19:27:33
[compat.c readconf.c]
Better conditions for strsep() ending.
- ho@cvs.openbsd.org 2000/07/10 10:27:05
[readconf.c]
Get the correct message on errors. (niels@ ok)
- ho@cvs.openbsd.org 2000/07/10 10:30:25
[cipher.c kex.c servconf.c]
strtok() --> strsep(). (niels@ ok)
|
|
- markus@cvs.openbsd.org 2000/06/18 18:50:11
[auth2.c compat.c compat.h sshconnect2.c]
make userauth+pubkey interop with ssh.com-2.2.0
- markus@cvs.openbsd.org 2000/06/18 20:56:17
[dsa.c]
mem leak + be more paranoid in dsa_verify.
- markus@cvs.openbsd.org 2000/06/18 21:29:50
[key.c]
cleanup fingerprinting, less hardcoded sizes
- markus@cvs.openbsd.org 2000/06/19 19:39:45
[atomicio.c auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c authfd.c authfd.h authfile.c bufaux.c bufaux.h]
[buffer.c buffer.h canohost.c channels.c channels.h cipher.c cipher.h]
[clientloop.c compat.c compat.h compress.c compress.h crc32.c crc32.h]
[deattack.c dispatch.c dsa.c fingerprint.c fingerprint.h getput.h hmac.c]
[kex.c log-client.c log-server.c login.c match.c mpaux.c mpaux.h nchan.c]
[nchan.h packet.c packet.h pty.c pty.h readconf.c readconf.h readpass.c]
[rsa.c rsa.h scp.c servconf.c servconf.h ssh-add.c ssh-keygen.c ssh.c]
[ssh.h tildexpand.c ttymodes.c ttymodes.h uidswap.c xmalloc.c xmalloc.h]
OpenBSD tag
- markus@cvs.openbsd.org 2000/06/21 10:46:10
sshconnect2.c missing free; nuke old comment
|
|
- deraadt@cvs.openbsd.org 2000/06/17 09:58:46
[channels.c]
everyone says "nix it" (remove protocol 2 debugging message)
- markus@cvs.openbsd.org 2000/06/17 13:24:34
[sshconnect.c]
allow extended server banners
- markus@cvs.openbsd.org 2000/06/17 14:30:10
[sshconnect.c]
missing atomicio, typo
- jakob@cvs.openbsd.org 2000/06/17 16:52:34
[servconf.c servconf.h session.c sshd.8 sshd_config]
add support for ssh v2 subsystems. ok markus@.
- deraadt@cvs.openbsd.org 2000/06/17 18:57:48
[readconf.c servconf.c]
include = in WHITESPACE; markus ok
- markus@cvs.openbsd.org 2000/06/17 19:09:10
[auth2.c]
implement bug compatibility with ssh-2.0.13 pubkey, server side
- markus@cvs.openbsd.org 2000/06/17 21:00:28
[compat.c]
initial support for ssh.com's 2.2.0
- markus@cvs.openbsd.org 2000/06/17 21:16:09
[scp.c]
typo
- markus@cvs.openbsd.org 2000/06/17 22:05:02
[auth-rsa.c auth2.c serverloop.c session.c auth-options.c auth-options.h]
split auth-rsa option parsing into auth-options
add options support to authorized_keys2
- markus@cvs.openbsd.org 2000/06/17 22:42:54
[session.c]
typo
|
|
<tibbs@math.uh.edu>
- (djm) OpenBSD CVS updates:
- todd@cvs.openbsd.org
[sshconnect2.c]
teach protocol v2 to count login failures properly and also enable an
explanation of why the password prompt comes up again like v1; this is NOT
crypto
- markus@cvs.openbsd.org
[readconf.c readconf.h servconf.c servconf.h session.c ssh.1 ssh.c sshd.8]
xauth_location support; pr 1234
[readconf.c sshconnect2.c]
typo, unused
[session.c]
allow use_login only for login sessions, otherwise remote commands are
execed with uid==0
[sshd.8]
document UseLogin better
[version.h]
OpenSSH 2.1.1
[auth-rsa.c]
fix match_hostname() logic for auth-rsa: deny access if we have a
negative match or no match at all
[channels.c hostfile.c match.c]
don't panic if mkdtemp fails for authfwd; jkb@yahoo-inc.com via
kris@FreeBSD.org
|
|
- markus@cvs.openbsd.org
[session.c]
make x11-fwd work w/ localhost (xauth add host/unix:11)
[cipher.c compat.c readconf.c servconf.c]
check strtok() != NULL; ok niels@
[key.c]
fix key_read() for uuencoded keys w/o '='
[serverloop.c]
group ssh1 vs. ssh2 in serverloop
[kex.c kex.h myproposal.h sshconnect2.c sshd.c]
split kexinit/kexdh, factor out common code
[readconf.c ssh.1 ssh.c]
forwardagent defaults to no, add ssh -A
- theo@cvs.openbsd.org
[session.c]
just some line shortening
|
|
- markus@cvs.openbsd.org
[cipher.h myproposal.h readconf.c readconf.h servconf.c ssh.1 ssh.c]
[ssh.h sshconnect1.c sshconnect2.c sshd.8]
- complain about invalid ciphers in SSH1 (e.g. arcfour is SSH2 only)
- hugh@cvs.openbsd.org
[ssh.1]
- zap typo
[ssh-keygen.1]
- One last nit fix. (markus approved)
[sshd.8]
- some markus certified spelling adjustments
- markus@cvs.openbsd.org
[auth2.c channels.c clientloop.c compat compat.h dsa.c kex.c]
[sshconnect2.c ]
- bug compat w/ ssh-2.0.13 x11, split out bugs
[nchan.c]
- no drain if ibuf_empty, fixes x11fwd problems; tests by fries@
[ssh-keygen.c]
- handle escapes in real and original key format, ok millert@
[version.h]
- OpenSSH-2.1
|
|
- Big OpenBSD CVS update
- markus@cvs.openbsd.org
[clientloop.c]
- typo
[session.c]
- update proctitle on pty alloc/dealloc, e.g. w/ windows client
[session.c]
- update proctitle for proto 1, too
[channels.h nchan.c serverloop.c session.c sshd.c]
- use c-style comments
- deraadt@cvs.openbsd.org
[scp.c]
- more atomicio
- markus@cvs.openbsd.org
[channels.c]
- set O_NONBLOCK
[ssh.1]
- update AUTHOR
[readconf.c ssh-keygen.c ssh.h]
- default DSA key file ~/.ssh/id_dsa
[clientloop.c]
- typo, rm verbose debug
- deraadt@cvs.openbsd.org
[ssh-keygen.1]
- document DSA use of ssh-keygen
[sshd.8]
- a start at describing what i understand of the DSA side
[ssh-keygen.1]
- document -X and -x
[ssh-keygen.c]
- simplify usage
- markus@cvs.openbsd.org
[sshd.8]
- there is no rhosts_dsa
[ssh-keygen.1]
- document -y, update -X,-x
[nchan.c]
- fix close for non-open ssh1 channels
[servconf.c servconf.h ssh.h sshd.8 sshd.c ]
- s/DsaKey/HostDSAKey/, document option
[sshconnect2.c]
- respect number_of_password_prompts
[channels.c channels.h servconf.c servconf.h session.c sshd.8]
- GatewayPorts for sshd, ok deraadt@
[ssh-add.1 ssh-agent.1 ssh.1]
- more doc on: DSA, id_dsa, known_hosts2, authorized_keys2
[ssh.1]
- more info on proto 2
[sshd.8]
- sync AUTHOR w/ ssh.1
[key.c key.h sshconnect.c]
- print key type when talking about host keys
[packet.c]
- clear padding in ssh2
[dsa.c key.c radix.c ssh.h sshconnect1.c uuencode.c uuencode.h]
- replace broken uuencode w/ libc b64_ntop
[auth2.c]
- log failure before sending the reply
[key.c radix.c uuencode.c]
- remote trailing comments before calling __b64_pton
[auth2.c readconf.c readconf.h servconf.c servconf.h ssh.1]
[sshconnect2.c sshd.8]
- add DSAAuthetication option to ssh/sshd, document SSH2 in sshd.8
- Bring in b64_ntop and b64_pton from OpenBSD libc (bsd-base64.[ch])
|
|
[channels.c]
- init all fds, close all fds.
[sshconnect2.c]
- check whether file exists before asking for passphrase
[servconf.c servconf.h sshd.8 sshd.c]
- PidFile, pr 1210
[channels.c]
- EINTR
[channels.c]
- unbreak, ok niels@
[sshd.c]
- unlink pid file, ok niels@
[auth2.c]
- Add missing #ifdefs; ok - markus
|
|
[README.openssh2]
- interop w/ F-secure windows client
- sync documentation
- ssh_host_dsa_key not ssh_dsa_key
[auth-rsa.c]
- missing fclose
[auth.c authfile.c compat.c dsa.c dsa.h hostfile.c key.c key.h radix.c]
[readconf.c readconf.h ssh-add.c ssh-keygen.c ssh.c ssh.h sshconnect.c]
[sshd.c uuencode.c uuencode.h authfile.h]
- add DSA pubkey auth and other SSH2 fixes. use ssh-keygen -[xX]
for trading keys with the real and the original SSH, directly from the
people who invented the SSH protocol.
[auth.c auth.h authfile.c sshconnect.c auth1.c auth2.c sshconnect.h]
[sshconnect1.c sshconnect2.c]
- split auth/sshconnect in one file per protocol version
[sshconnect2.c]
- remove debug
[uuencode.c]
- add trailing =
[version.h]
- OpenSSH-2.0
[ssh-keygen.1 ssh-keygen.c]
- add -R flag: exit code indicates if RSA is alive
[sshd.c]
- remove unused
silent if -Q is specified
[ssh.h]
- host key becomes /etc/ssh_host_dsa_key
[readconf.c servconf.c ]
- ssh/sshd default to proto 1 and 2
[uuencode.c]
- remove debug
[auth2.c ssh-keygen.c sshconnect2.c sshd.c]
- xfree DSA blobs
[auth2.c serverloop.c session.c]
- cleanup logging for sshd/2, respect PasswordAuth no
[sshconnect2.c]
- less debug, respect .ssh/config
[README.openssh2 channels.c channels.h]
- clientloop.c session.c ssh.c
- support for x11-fwding, client+server
|
|
[ssh.1 ssh.c]
- ssh -2
[auth.c channels.c clientloop.c packet.c packet.h serverloop.c]
[session.c sshconnect.c]
- check payload for (illegal) extra data
[ALL]
- whitespace cleanup
|
|
- [channels.c]
repair x11-fwd
- [sshconnect.c]
fix passwd prompt for ssh2, less debugging output.
- [clientloop.c compat.c dsa.c kex.c sshd.c]
less debugging output
- [kex.c kex.h sshconnect.c sshd.c]
check for reasonable public DH values
- [README.openssh2 cipher.c cipher.h compat.c compat.h readconf.c]
[readconf.h servconf.c servconf.h ssh.c ssh.h sshconnect.c sshd.c]
add Cipher and Protocol options to ssh/sshd, e.g.:
ssh -o 'Protocol 1,2' if you prefer proto 1, ssh -o 'Ciphers
arcfour,3des-cbc'
- [sshd.c]
print 1.99 only if server supports both
|
|
- [auth.c auth.h servconf.c servconf.h serverloop.c session.c]
[session.h ssh.h sshd.c README.openssh2]
ssh2 server side, see README.openssh2; enable with 'sshd -2'
- [channels.c]
no adjust after close
- [sshd.c compat.c ]
interop w/ latest ssh.com windows client.
|
|
[ssh.h atomicio.c]
- int atomicio -> ssize_t (for alpha). ok deraadt@
[auth-rsa.c]
- delay MD5 computation until client sends response, free() early, cleanup.
[cipher.c]
- void* -> unsigned char*, ok niels@
[hostfile.c]
- remove unused variable 'len'. fix comments.
- remove unused variable
[log-client.c log-server.c]
- rename a cpp symbol, to avoid param.h collision
[packet.c]
- missing xfree()
- getsockname() requires initialized tolen; andy@guildsoftware.com
- use getpeername() in packet_connection_is_on_socket(), fixes sshd -i;
from Holger.Trapp@Informatik.TU-Chemnitz.DE
[pty.c pty.h]
- register cleanup for pty earlier. move code for pty-owner handling to
pty.c ok provos@, dugsong@
[readconf.c]
- turn off x11-fwd for the client, too.
[rsa.c]
- PKCS#1 padding
[scp.c]
- allow '.' in usernames; from jedgar@fxp.org
[servconf.c]
- typo: ignore_user_known_hosts int->flag; naddy@mips.rhein-neckar.de
- sync with sshd_config
[ssh-keygen.c]
- enable ssh-keygen -l -f ~/.ssh/known_hosts, ok deraadt@
[ssh.1]
- Change invalid 'CHAT' loglevel to 'VERBOSE'
[ssh.c]
- suppress AAAA query host when '-4' is used; from shin@nd.net.fujitsu.co.jp
- turn off x11-fwd for the client, too.
[sshconnect.c]
- missing xfree()
- retry rresvport_af(), too. from sumikawa@ebina.hitachi.co.jp.
- read error vs. "Connection closed by remote host"
[sshd.8]
- ie. -> i.e.,
- do not link to a commercial page..
- sync with sshd_config
[sshd.c]
- no need for poll.h; from bright@wintelcom.net
- log with level log() not fatal() if peer behaves badly.
- don't panic if client behaves strange. ok deraadt@
- make no-port-forwarding for RSA keys deny both -L and -R style fwding
- delay close() of pty until the pty has been chowned back to root
- oops, fix comment, too.
- missing xfree()
- move XAUTHORITY to subdir. ok dugsong@. fixes debian bug #57907, too.
(http://cgi.debian.org/cgi-bin/bugreport.cgi?archive=no&bug=57907)
- register cleanup for pty earlier. move code for pty-owner handling to
pty.c ok provos@, dugsong@
- create x11 cookie file
- fix pr 1113, fclose() -> pclose(), todo: remote popen()
- version 1.2.3
- Cleaned up
|
|
- [sshd.c sshd.8 sshconnect.c ssh.h ssh.c servconf.h servconf.c scp.1]
[scp.c packet.h packet.c login.c log.c canohost.c channels.c]
[hostfile.c sshd_config]
ipv6 support: mostly gethostbyname->getaddrinfo/getnameinfo, new
features: sshd allows multiple ListenAddress and Port options. note
that libwrap is not IPv6-ready. (based on patches from
fujiwara@rcac.tdi.co.jp)
- [ssh.c canohost.c]
more hints (hints.ai_socktype=SOCK_STREAM) for getaddrinfo,
from itojun@
- [channels.c]
listen on _all_ interfaces for X11-Fwd (hints.ai_flags = AI_PASSIVE)
- [packet.h]
allow auth-kerberos for IPv4 only
- [scp.1 sshd.8 servconf.h scp.c]
document -4, -6, and 'ssh -L 2022/::1/22'
- [ssh.c]
'ssh @host' is illegal (null user name), from
karsten@gedankenpolizei.de
- [sshconnect.c]
better error message
- [sshd.c]
allow auth-kerberos for IPv4 only
- Big IPv6 merge:
- Cleanup overrun in sockaddr copying on RHL 6.1
- Replacements for getaddrinfo, getnameinfo, etc based on versions
from patch from KIKUCHI Takahiro <kick@kyoto.wide.ad.jp>
- Replacement for missing structures on systems that lack IPv6
- record_login needed to know about AF_INET6 addresses
- Borrowed more code from OpenBSD: rresvport_af and requisites
|
|
- Merged OpenBSD CVS changes:
- [channels.c]
report from mrwizard@psu.edu via djm@ibs.com.au
- [channels.c]
set SO_REUSEADDR and SO_LINGER for forwarded ports.
chip@valinux.com via damien@ibs.com.au
- [nchan.c]
it's not an error() if shutdown_write failes in nchan.
- [readconf.c]
remove dead #ifdef-0-code
- [readconf.c servconf.c]
strcasecmp instead of tolower
- [scp.c]
progress meter overflow fix from damien@ibs.com.au
- [ssh-add.1 ssh-add.c]
SSH_ASKPASS support
- [ssh.1 ssh.c]
postpone fork_after_authentication until command execution,
request/patch from jahakala@cc.jyu.fi via damien@ibs.com.au
plus: use daemon() for backgrounding
|
|
- OpenBSD CVS updates
- [channels.c cipher.c compat.c log-client.c scp.c serverloop.c]
[ssh.h sshd.8 sshd.c]
syslog changes:
* Unified Logmessage for all auth-types, for success and for failed
* Standard connections get only ONE line in the LOG when level==LOG:
Auth-attempts are logged only, if authentication is:
a) successfull or
b) with passwd or
c) we had more than AUTH_FAIL_LOG failues
* many log() became verbose()
* old behaviour with level=VERBOSE
- [readconf.c readconf.h ssh.1 ssh.h sshconnect.c sshd.c]
tranfer s/key challenge/response data in SSH_SMSG_AUTH_TIS_CHALLENGE
messages. allows use of s/key in windows (ttssh, securecrt) and
ssh-1.2.27 clients without 'ssh -v', ok: niels@
- [sshd.8]
-V, for fallback to openssh in SSH2 compatibility mode
- [sshd.c]
fix sigchld race; cjc5@po.cwru.edu
|
|
- [channels.c]
make this compile, bad markus
- [log.c readconf.c servconf.c ssh.h]
bugfix: loglevels are per host in clientconfig,
factor out common log-level parsing code.
- [servconf.c]
remove unused index (-Wall)
- [ssh-agent.c]
only one 'extern char *__progname'
- [sshd.8]
document SIGHUP, -Q to synopsis
- [sshconnect.c serverloop.c sshd.c packet.c packet.h]
[channels.c clientloop.c]
SSH_CMSG_MAX_PACKET_SIZE, some clients use this, some need this, niels@
[hope this time my ISP stays alive during commit]
|
|
- [auth-rh-rsa.c auth-rhosts.c auth-rsa.c channels.c clientloop.c]
[ssh.c ssh.h sshconnect.c sshd.c]
make all access to options via 'extern Options options'
and 'extern ServerOptions options' respectively;
options are no longer passed as arguments:
* make options handling more consistent
* remove #include "readconf.h" from ssh.h
* readconf.h is only included if necessary
- [mpaux.c] clear temp buffer
- [servconf.c] print _all_ bad options found in configfile
|
|
- [sshd.c] session_key_int may be zero
- [auth-rh-rsa.c servconf.c servconf.h ssh.h sshd.8 sshd.c sshd_config]
IgnoreUserKnownHosts(default=no), used for RhostRSAAuth, ok
deraadt,millert
- Brought default sshd_config more in line with OpenBSDs
|
|
- [auth-krb4.c auth-passwd.c] remove x11- and krb-cleanup from fatal()
+ krb-cleanup cleanup
- [clientloop.c log-client.c log-server.c ]
[readconf.c readconf.h servconf.c servconf.h ]
[ssh.1 ssh.c ssh.h sshd.8]
add LogLevel {QUIET, FATAL, ERROR, INFO, CHAT, DEBUG} to ssh/sshd,
obsoletes QuietMode and FascistLogging in sshd.
|
|
|
