summaryrefslogtreecommitdiff
path: root/servconf.c
AgeCommit message (Collapse)Author
2010-01-01* New upstream release (closes: #536182). Yes, I know 5.3p1 has been outColin Watson
for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958).
2010-01-01import openssh-5.2p1-gsskex-all-20090726.patchColin Watson
2009-12-29import openssh-5.1p1-gsskex-cjwatson-20080722.patchColin Watson
2009-12-29import openssh-4.7p1-gsskex-20070927.patchColin Watson
2009-12-29import openssh-4.6p1-gsskex-20070312.patchColin Watson
2009-12-29import openssh-4.3p2-gsskex-20060223.patchColin Watson
2009-12-29import openssh-4.2p1-gsskex-20050926-2.patchColin Watson
2009-01-28 - djm@cvs.openbsd.org 2009/01/22 10:02:34Damien Miller
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h] [serverloop.c ssh-keyscan.c ssh.c sshd.c] make a2port() return -1 when it encounters an invalid port number rather than 0, which it will now treat as valid (needed for future work) adjust current consumers of a2port() to check its return value is <= 0, which in turn required some things to be converted from u_short => int make use of int vs. u_short consistent in some other places too feedback & ok markus@
2009-01-28 - stevesk@cvs.openbsd.org 2008/12/09 03:20:42Damien Miller
[channels.c servconf.c] channel_print_adm_permitted_opens() should deal with all the printing for that config option. suggested by markus@; ok markus@ djm@ dtucker@
2008-11-11 - stevesk@cvs.openbsd.org 2008/11/11 02:58:09Darren Tucker
[servconf.c] USE_AFS not referenced so remove #ifdef. fixes sshd -T not printing kerberosgetafstoken. ok dtucker@ (Id sync only, we still want the ifdef in portable)
2008-11-11 - (dtucker) OpenBSD CVS SyncDarren Tucker
- jmc@cvs.openbsd.org 2008/11/05 11:22:54 [servconf.c] passord -> password; fixes user/5975 from Rene Maroufi
2008-11-05 - djm@cvs.openbsd.org 2008/11/04 08:22:13Damien Miller
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h] [readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5] [sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c] [Makefile.in] Add support for an experimental zero-knowledge password authentication method using the J-PAKE protocol described in F. Hao, P. Ryan, "Password Authenticated Key Exchange by Juggling", 16th Workshop on Security Protocols, Cambridge, April 2008. This method allows password-based authentication without exposing the password to the server. Instead, the client and server exchange cryptographic proofs to demonstrate of knowledge of the password while revealing nothing useful to an attacker or compromised endpoint. This is experimental, work-in-progress code and is presently compiled-time disabled (turn on -DJPAKE in Makefile.inc). "just commit it. It isn't too intrusive." deraadt@
2008-11-05 - OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2008/11/03 08:59:41 [servconf.c] include MaxSessions in sshd -T output; patch from imorgan AT nas.nasa.gov
2008-11-03 - djm@cvs.openbsd.org 2008/10/09 03:50:54Damien Miller
[servconf.c sshd_config.5] support setting PermitEmptyPasswords in a Match block requested in PR3891; ok dtucker@
2008-07-25add GSSAPIKeyExchange, GSSAPIStrictAcceptorCheck, and PermitBlacklistedKeys ↵Colin Watson
to sshd -T configuration dump
2008-07-24revert accidental commitColin Watson
2008-07-24typoColin Watson
2008-07-23 - (djm) [servconf.c] Print UsePAM option in config test mode (when itDamien Miller
has been compiled in); report from nix-corp AT esperi.org.uk ok dtucker@
2008-07-23 - djm@cvs.openbsd.org 2008/07/23 07:36:55Damien Miller
[servconf.c] do not try to print options that have been compile-time disabled in config test mode (sshd -T); report from nix-corp AT esperi.org.uk ok dtucker@
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-04 - djm@cvs.openbsd.org 2008/07/04 03:44:59Darren Tucker
[servconf.c groupaccess.h groupaccess.c] support negation of groups in "Match group" block (bz#1315); ok dtucker@
2008-07-02 - djm@cvs.openbsd.org 2008/07/02 02:24:18Darren Tucker
[sshd_config sshd_config.5 sshd.8 servconf.c] increase default size of ssh protocol 1 ephemeral key from 768 to 1024 bits; prodded by & ok dtucker@ ok deraadt@
2008-06-16 - dtucker@cvs.openbsd.org 2008/06/15 16:58:40Damien Miller
[servconf.c sshd_config.5] Allow MaxAuthTries within a Match block. ok djm@
2008-06-11 - djm@cvs.openbsd.org 2008/06/10 23:06:19Darren Tucker
[auth-options.c match.c servconf.c addrmatch.c sshd.8] support CIDR address matching in .ssh/authorized_keys from="..." stanzas ok and extensive testing dtucker@
2008-06-10 - dtucker@cvs.openbsd.org 2008/06/10 04:50:25Darren Tucker
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8] Add extended test mode (-T) and connection parameters for test mode (-C). -T causes sshd to write its effective configuration to stdout and exit. -C causes any relevant Match rules to be applied before output. The combination allows tesing of the parser and config files. ok deraadt djm
2008-06-10 - (dtucker) OpenBSD CVS SyncDarren Tucker
- djm@cvs.openbsd.org 2008/06/10 03:57:27 [servconf.c match.h sshd_config.5] support CIDR address matching in sshd_config "Match address" blocks, with full support for negation and fall-back to classic wildcard matching. For example: Match address 192.0.2.0/24,3ffe:ffff::/32,!10.* PasswordAuthentication yes addrmatch.c code mostly lifted from flowd's addr.c feedback and ok dtucker@
2008-05-19 - djm@cvs.openbsd.org 2008/05/08 12:21:16Damien Miller
[monitor.c monitor_wrap.c session.h servconf.c servconf.h session.c] [sshd_config sshd_config.5] Make the maximum number of sessions run-time controllable via a sshd_config MaxSessions knob. This is useful for disabling login/shell/subsystem access while leaving port-forwarding working (MaxSessions 0), disabling connection multiplexing (MaxSessions 1) or simply increasing the number of allows multiplexed sessions. Because some bozos are sure to configure MaxSessions in excess of the number of available file descriptors in sshd (which, at peak, might be as many as 9*MaxSessions), audit sshd to ensure that it doesn't leak fds on error paths, and make it fail gracefully on out-of-fd conditions - sending channel errors instead of than exiting with fatal(). bz#1090; MaxSessions config bits and manpage from junyer AT gmail.com ok markus@
2008-05-19 - djm@cvs.openbsd.org 2008/05/08 12:02:23Damien Miller
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c] [monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c] [ssh.c sshd.c] Implement a channel success/failure status confirmation callback mechanism. Each channel maintains a queue of callbacks, which will be drained in order (RFC4253 guarantees confirm messages are not reordered within an channel). Also includes a abandonment callback to clean up if a channel is closed without sending confirmation messages. This probably shouldn't happen in compliant implementations, but it could be abused to leak memory. ok markus@ (as part of a larger diff)
2008-05-19 - pyr@cvs.openbsd.org 2008/05/07 05:49:37Damien Miller
[servconf.c servconf.h session.c sshd_config.5] Enable the AllowAgentForwarding option in sshd_config (global and match context), to specify if agents should be permitted on the server. As the man page states: ``Note that disabling Agent forwarding does not improve security unless users are also denied shell access, as they can always install their own forwarders.'' ok djm@, ok and a mild frown markus@
2008-05-12* Mitigate OpenSSL security vulnerability:Colin Watson
- Add key blacklisting support. Keys listed in /etc/ssh/blacklist.TYPE-LENGTH will be rejected for authentication by sshd, unless "PermitBlacklistedKeys yes" is set in /etc/ssh/sshd_config. - Add a new program, ssh-vulnkey, which can be used to check keys against these blacklists. - Depend on openssh-blacklist. - Force dependencies on libssl0.9.8 / libcrypto0.9.8-udeb to at least 0.9.8g-9. - Automatically regenerate known-compromised host keys, with a critical-priority debconf note. (I regret that there was no time to gather translations.)
2008-02-10 - djm@cvs.openbsd.org 2008/02/10 10:54:29Damien Miller
[servconf.c session.c] delay ~ expansion for ChrootDirectory so it expands to the logged-in user's home, rather than the user who starts sshd (probably root)
2008-02-10 - djm@cvs.openbsd.org 2008/02/08 23:24:07Damien Miller
[servconf.c servconf.h session.c sftp-server.c sftp.h sshd_config] [sshd_config.5] add sshd_config ChrootDirectory option to chroot(2) users to a directory and tweak internal sftp server to work with it (no special files in chroot required). ok markus@
2008-01-01 - dtucker@cvs.openbsd.org 2008/01/01 09:27:33Darren Tucker
[sshd_config.5 servconf.c] Allow PermitRootLogin in a Match block. Allows for, eg, permitting root only from the local network. ok markus@, man page bit ok jmc@
2008-01-01 - (dtucker) OpenBSD CVS SyncDarren Tucker
- dtucker@cvs.openbsd.org 2007/12/31 10:41:31 [readconf.c servconf.c] Prevent strict-aliasing warnings on newer gcc versions. bz #1355, patch from Dmitry V. Levin, ok djm@
2007-12-29 - dtucker@cvs.openbsd.org 2007/12/27 14:22:08Darren Tucker
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c sshd.c] Add a small helper function to consistently handle the EAI_SYSTEM error code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417. ok markus@ stevesk@
2007-12-24* New upstream release (closes: #453367).Colin Watson
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if creation of an untrusted cookie fails; found and fixed by Jan Pechanec (closes: #444738). - sshd(8) in new installations defaults to SSH Protocol 2 only. Existing installations are unchanged. - The SSH channel window size has been increased, and both ssh(1) sshd(8) now send window updates more aggressively. These improves performance on high-BDP (Bandwidth Delay Product) networks. - ssh(1) and sshd(8) now preserve MAC contexts between packets, which saves 2 hash calls per packet and results in 12-16% speedup for arcfour256/hmac-md5. - A new MAC algorithm has been added, UMAC-64 (RFC4418) as "umac-64@openssh.com". UMAC-64 has been measured to be approximately 20% faster than HMAC-MD5. - Failure to establish a ssh(1) TunnelForward is now treated as a fatal error when the ExitOnForwardFailure option is set. - ssh(1) returns a sensible exit status if the control master goes away without passing the full exit status. - When using a ProxyCommand in ssh(1), set the outgoing hostname with gethostname(2), allowing hostbased authentication to work. - Make scp(1) skip FIFOs rather than hanging (closes: #246774). - Encode non-printing characters in scp(1) filenames. These could cause copies to be aborted with a "protocol error". - Handle SIGINT in sshd(8) privilege separation child process to ensure that wtmp and lastlog records are correctly updated. - Report GSSAPI mechanism in errors, for libraries that support multiple mechanisms. - Improve documentation for ssh-add(1)'s -d option. - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. - Delay execution of ssh(1)'s LocalCommand until after all forwardings have been established. - In scp(1), do not truncate non-regular files. - Improve exit message from ControlMaster clients. - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error (closes: #365541). - pam_end() was not being called if authentication failed (closes: #405041). - Manual page datestamps updated (closes: #433181).
2007-06-19 - Move C/R -> kbdint special case to after the defaults have beenColin Watson
loaded, which makes ChallengeResponse default to yes again. This was broken by the Match changes and not fixed properly subsequently (closes: #428968).
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2007-05-20 - dtucker@cvs.openbsd.org 2007/04/23 10:15:39Darren Tucker
[servconf.c] Remove debug() left over from development. ok deraadt@
2007-03-21 - dtucker@cvs.openbsd.org 2007/03/09 05:20:06Darren Tucker
[servconf.c sshd.c] Move C/R -> kbdint special case to after the defaults have been loaded, which makes ChallengeResponse default to yes again. This was broken by the Match changes and not fixed properly subsequently. Found by okan at demirmen.com, ok djm@ "please do it" deraadt@
2007-03-01 - dtucker@cvs.openbsd.org 2007/03/01 10:28:02Darren Tucker
[auth2.c sshd_config.5 servconf.c] Remove ChallengeResponseAuthentication support inside a Match block as its interaction with KbdInteractive makes it difficult to support. Also, relocate the CR/kbdint option special-case code into servconf. "please commit" djm@, ok markus@ for the relocation.
2007-02-25 - dtucker@cvs.openbsd.org 2007/02/22 12:58:40Darren Tucker
[servconf.c] Check activep so Match and GatewayPorts work together; ok markus@
2007-02-19 - dtucker@cvs.openbsd.org 2007/02/19 10:45:58Darren Tucker
[monitor_wrap.c servconf.c servconf.h monitor.c sshd_config.5] Teach Match how handle config directives that are used before authentication. This allows configurations such as permitting password authentication from the local net only while requiring pubkey from offsite. ok djm@, man page bits ok jmc@
2007-01-05 - dtucker@cvs.openbsd.org 2006/12/14 10:01:14Damien Miller
[servconf.c] Make "PermitOpen all" first-match within a block to match the way other options work. ok markus@ djm@
2007-01-05 - dtucker@cvs.openbsd.org 2006/12/13 08:34:39Damien Miller
[servconf.c] Make PermitOpen work with multiple values like the man pages says. bz #1267 with details from peter at dmtz.com, with & ok djm@
2006-12-23* Make GSSAPICleanupCreds a compatibility alias forColin Watson
GSSAPICleanupCredentials. Mark GSSUseSessionCCache and GSSAPIUseSessionCredCache as known-but-unsupported options, and migrate away from them on upgrade.
2006-08-19 - dtucker@cvs.openbsd.org 2006/08/14 12:40:25Damien Miller
[servconf.c servconf.h sshd_config.5] Add ability to match groups to Match keyword in sshd_config. Feedback djm@, stevesk@, ok stevesk@.
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:36:12Damien Miller
[authfile.c channels.c progressmeter.c scard.c servconf.c ssh.c] clean extra spaces
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h