| Age | Commit message (Collapse) | Author |
|---|
|
[monitor.c monitor_wrap.c servconf.c servconf.h]
use a macro to define which string options to copy between configs
for Match. This avoids problems caused by forgetting to keep three
code locations in perfect sync and ordering
"this is at once beautiful and horrible" + ok dtucker@
|
|
[servconf.c]
Add comment documenting what should be after the preauth check. ok djm
|
|
[servconf.c]
the options TrustedUserCAKeys, RevokedKeysFile, AuthorizedKeysFile
and AuthorizedPrincipalsFile were not being correctly applied in
Match blocks, despite being overridable there; ok dtucker@
|
|
|
|
[auth.c auth.h auth2-pubkey.c pathnames.h servconf.c servconf.h]
remove support for authorized_keys2; it is a relic from the early days
of protocol v.2 support and has been undocumented for many years;
ok markus@
|
|
[misc.c misc.h servconf.c]
print ipqos friendly string for sshd -T; ok markus
# sshd -Tf sshd_config|grep ipqos
ipqos lowdelay throughput
|
|
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
|
|
platforms that don't support ECC. Fixes some spurious warnings reported
by tim@
|
|
[servconf.c]
prevent free() of string in .rodata when overriding AuthorizedKeys in
a Match block; patch from rein AT basefarm.no
|
|
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
|
|
[servconf.c]
pick up ECDSA host key by default; ok djm@
|
|
[servconf.c sshd_config.5]
expose some more sshd_config options inside Match blocks:
AuthorizedKeysFile AuthorizedPrincipalsFile
HostbasedUsesNameFromPacketOnly PermitTunnel
bz#1764; feedback from imorgan AT nas.nasa.gov; ok dtucker@
|
|
[auth-options.c auth-options.h auth.c auth.h auth2-pubkey.c]
[key.c servconf.c servconf.h sshd.8 sshd_config.5]
add some optional indirection to matching of principal names listed
in certificates. Currently, a certificate must include the a user's name
to be accepted for authentication. This change adds the ability to
specify a list of certificate principal names that are acceptable.
When authenticating using a CA trusted through ~/.ssh/authorized_keys,
this adds a new principals="name1[,name2,...]" key option.
For CAs listed through sshd_config's TrustedCAKeys option, a new config
option "AuthorizedPrincipalsFile" specifies a per-user file containing
the list of acceptable names.
If either option is absent, the current behaviour of requiring the
username to appear in principals continues to apply.
These options are useful for role accounts, disjoint account namespaces
and "user@realm"-style naming policies in certificates.
feedback and ok markus@
|
|
[servconf.c]
from portable: getcwd(NULL, 0) doesn't work on all platforms, so
use a stack buffer; ok dtucker@
|
|
[servconf.c]
do not prepend AuthorizedKeysFile with getcwd(), unbreaks relative paths
free() (not xfree()) the buffer returned by getcwd()
|
|
[servconf.c]
unbreak AuthorizedKeys option with a $HOME-relative path; reported by
vinschen AT redhat.com, ok dtucker@
|
|
[auth-rh-rsa.c auth-rsa.c auth.c auth.h auth2-hostbased.c auth2-pubkey.c]
[authfile.c authfile.h hostfile.c hostfile.h servconf.c servconf.h]
[ssh-keygen.c ssh.1 sshconnect.c sshd_config.5]
Add a TrustedUserCAKeys option to sshd_config to specify CA keys that
are trusted to authenticate users (in addition than doing it per-user
in authorized_keys).
Add a RevokedKeys option to sshd_config and a @revoked marker to
known_hosts to allow keys to me revoked and banned for user or host
authentication.
feedback and ok markus@
|
|
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
|
|
[servconf.c servconf.h sshd.c]
avoid run-time failures when specifying hostkeys via a relative
path by prepending the cwd in these cases; bz#1290; ok dtucker@
|
|
[servconf.c]
Add ChrootDirectory to sshd.c test-mode output
|
|
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
|
|
Remove hacks add for RoutingDomain in preparation for its removal.
|
|
RoutingDomain an unsupported option on platforms that don't have it.
|
|
[sshd_config.5 readconf.c ssh_config.5 scp.1 servconf.c sftp.1 ssh.1]
Rename RDomain config option to RoutingDomain to be more clear and
consistent with other options.
NOTE: if you currently use RDomain in the ssh client or server config,
or ssh/sshd -o, you must update to use RoutingDomain.
ok markus@ djm@
|
|
[readconf.c servconf.c misc.h ssh-keyscan.c misc.c]
validate routing domain is in range 0-RT_TABLEID_MAX.
'Looks right' deraadt@
|
|
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
|
|
- markus@cvs.openbsd.org 2009/10/08 14:03:41
[sshd_config readconf.c ssh_config.5 servconf.c sshd_config.5]
disable protocol 1 by default (after a transition period of about 10 years)
ok deraadt
|
|
|
|
[servconf.c]
Fixed a few the-the misspellings in comments. Skipped a bunch in
binutils,gcc and so on. ok jmc@
|
|
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
|
|
[channels.c servconf.c]
channel_print_adm_permitted_opens() should deal with all the printing
for that config option. suggested by markus@; ok markus@ djm@
dtucker@
|
|
[servconf.c]
USE_AFS not referenced so remove #ifdef. fixes sshd -T not printing
kerberosgetafstoken. ok dtucker@
(Id sync only, we still want the ifdef in portable)
|
|
- jmc@cvs.openbsd.org 2008/11/05 11:22:54
[servconf.c]
passord -> password;
fixes user/5975 from Rene Maroufi
|
|
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h]
[readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5]
[sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c]
[Makefile.in]
Add support for an experimental zero-knowledge password authentication
method using the J-PAKE protocol described in F. Hao, P. Ryan,
"Password Authenticated Key Exchange by Juggling", 16th Workshop on
Security Protocols, Cambridge, April 2008.
This method allows password-based authentication without exposing
the password to the server. Instead, the client and server exchange
cryptographic proofs to demonstrate of knowledge of the password while
revealing nothing useful to an attacker or compromised endpoint.
This is experimental, work-in-progress code and is presently
compiled-time disabled (turn on -DJPAKE in Makefile.inc).
"just commit it. It isn't too intrusive." deraadt@
|
|
- djm@cvs.openbsd.org 2008/11/03 08:59:41
[servconf.c]
include MaxSessions in sshd -T output; patch from imorgan AT nas.nasa.gov
|
|
[servconf.c sshd_config.5]
support setting PermitEmptyPasswords in a Match block
requested in PR3891; ok dtucker@
|
|
has been compiled in); report from nix-corp AT esperi.org.uk
ok dtucker@
|
|
[servconf.c]
do not try to print options that have been compile-time disabled
in config test mode (sshd -T); report from nix-corp AT esperi.org.uk
ok dtucker@
|
|
[servconf.c groupaccess.h groupaccess.c]
support negation of groups in "Match group" block (bz#1315); ok dtucker@
|
|
[sshd_config sshd_config.5 sshd.8 servconf.c]
increase default size of ssh protocol 1 ephemeral key from 768 to 1024
bits; prodded by & ok dtucker@ ok deraadt@
|
|
[servconf.c sshd_config.5]
Allow MaxAuthTries within a Match block. ok djm@
|
|
[auth-options.c match.c servconf.c addrmatch.c sshd.8]
support CIDR address matching in .ssh/authorized_keys from="..." stanzas
ok and extensive testing dtucker@
|
|
[sshd.c channels.h channels.c log.c servconf.c log.h servconf.h sshd.8]
Add extended test mode (-T) and connection parameters for test mode (-C).
-T causes sshd to write its effective configuration to stdout and exit.
-C causes any relevant Match rules to be applied before output. The
combination allows tesing of the parser and config files. ok deraadt djm
|
|
- djm@cvs.openbsd.org 2008/06/10 03:57:27
[servconf.c match.h sshd_config.5]
support CIDR address matching in sshd_config "Match address" blocks, with
full support for negation and fall-back to classic wildcard matching.
For example:
Match address 192.0.2.0/24,3ffe:ffff::/32,!10.*
PasswordAuthentication yes
addrmatch.c code mostly lifted from flowd's addr.c
feedback and ok dtucker@
|
|
[monitor.c monitor_wrap.c session.h servconf.c servconf.h session.c]
[sshd_config sshd_config.5]
Make the maximum number of sessions run-time controllable via
a sshd_config MaxSessions knob. This is useful for disabling
login/shell/subsystem access while leaving port-forwarding working
(MaxSessions 0), disabling connection multiplexing (MaxSessions 1) or
simply increasing the number of allows multiplexed sessions.
Because some bozos are sure to configure MaxSessions in excess of the
number of available file descriptors in sshd (which, at peak, might be
as many as 9*MaxSessions), audit sshd to ensure that it doesn't leak fds
on error paths, and make it fail gracefully on out-of-fd conditions -
sending channel errors instead of than exiting with fatal().
bz#1090; MaxSessions config bits and manpage from junyer AT gmail.com
ok markus@
|
|
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
|
|
[servconf.c servconf.h session.c sshd_config.5]
Enable the AllowAgentForwarding option in sshd_config (global and match
context), to specify if agents should be permitted on the server.
As the man page states:
``Note that disabling Agent forwarding does not improve security
unless users are also denied shell access, as they can always install
their own forwarders.''
ok djm@, ok and a mild frown markus@
|
|
[servconf.c session.c]
delay ~ expansion for ChrootDirectory so it expands to the logged-in user's
home, rather than the user who starts sshd (probably root)
|
|
[servconf.c servconf.h session.c sftp-server.c sftp.h sshd_config]
[sshd_config.5]
add sshd_config ChrootDirectory option to chroot(2) users to a directory
and tweak internal sftp server to work with it (no special files in
chroot required). ok markus@
|
|
[sshd_config.5 servconf.c]
Allow PermitRootLogin in a Match block. Allows for, eg, permitting root
only from the local network. ok markus@, man page bit ok jmc@
|
