Age | Commit message (Collapse) | Author |
|
[servconf.c sshd.8]
protocol 2 HostKey code default is now /etc/ssh_host_rsa_key and
/etc/ssh_host_dsa_key like we have in sshd_config. ok markus@
|
|
[readconf.c servconf.c]
remove #ifdef _PATH_XAUTH/#endif; ok markus@
|
|
[auth1.c auth2.c auth2-chall.c auth-bsdauth.c auth.c authfile.c auth.h]
[auth-krb4.c auth-rhosts.c auth-skey.c bufaux.c canohost.c channels.c]
[cipher.c clientloop.c compat.c compress.c deattack.c key.c log.c mac.c]
[match.c misc.c nchan.c packet.c readconf.c rijndael.c rijndael.h scard.c]
[servconf.c servconf.h serverloop.c session.c sftp.c sftp-client.c]
[sftp-glob.c sftp-int.c sftp-server.c ssh-add.c ssh-agent.c ssh.c]
[sshconnect1.c sshconnect2.c sshconnect.c sshd.8 sshd.c sshd_config]
[ssh-keygen.c sshlogin.c sshpty.c sshtty.c ttymodes.c uidswap.c]
basic KNF done while i was looking for something else
|
|
[servconf.c servconf.h sshd.8 sshd.c]
add -o to sshd, too. ok deraadt@
- (bal) Minor white space fix up in servconf.c
|
|
[authfd.c authfile.c bufaux.c channels.c compat.c kex.c kexgex.c
key.c misc.c packet.c servconf.c ssh-agent.c sshconnect2.c
sshconnect.c sshd.c ssh-dss.c ssh-keygen.c ssh-rsa.c]
minor KNF
|
|
[auth2.c auth.c readconf.c servconf.c ssh-agent.c ssh-keygen.c]
enum/int type cleanup where it made sense to do so; ok markus@
|
|
[servconf.c]
enable authorized_keys2 again. tested by fries@
|
|
This should help reduce diff collisions for new server options (as they
will appear at the end)
|
|
[servconf.c]
make AuthorizedKeysFile2 fallback to AuthorizedKeysFile if AuthorizedKeysFile is specified.
|
|
[servconf.c servconf.h session.c sshd.8]
deprecate CheckMail. ok markus@
|
|
[servconf.c]
make it compilable in all 4 combination of KRB4/KRB5 settings.
dugsong ok
XXX isn't it sensitive to the order of -I/usr/include/kerberosIV and
-I/usr/include/kerberosV?
|
|
- stevesk@cvs.openbsd.org 2001/07/08 15:23:38
[servconf.c]
fix ``MaxStartups max''; ok markus@
|
|
|
|
[servconf.c]
#include <kafs.h>
|
|
[auth1.c auth.h auth-krb4.c auth-passwd.c readconf.c readconf.h
servconf.c servconf.h session.c sshconnect1.c sshd.c]
Kerberos v5 support for SSH1, mostly from Assar Westerlund
<assar@freebsd.org> and Bjorn Gronvall <bg@sics.se>. markus@ ok
|
|
[auth1.c auth2.c auth2-chall.c authfd.c authfile.c auth-rhosts.c
canohost.c channels.c cipher.c clientloop.c deattack.c dh.c
hostfile.c kex.c kexdh.c kexgex.c key.c nchan.c packet.c radix.c
readpass.c scp.c servconf.c serverloop.c session.c sftp.c
sftp-client.c sftp-glob.c sftp-int.c sftp-server.c ssh-add.c
ssh-agent.c ssh.c sshconnect1.c sshconnect2.c sshconnect.c sshd.c
ssh-keygen.c ssh-keyscan.c]
more strict prototypes. raise warning level in Makefile.inc.
markus ok'ed
TODO; cleanup headers
|
|
[includes.h pathnames.h readconf.c servconf.c]
move the path for xauth to pathnames.h
|
|
[auth-rsa.c auth.c auth.h auth2.c servconf.c servconf.h sshd.8
sshd_config]
configurable authorized_keys{,2} location; originally from peter@;
ok djm@
|
|
[misc.c misc.h servconf.c sshd.8 sshd.c]
sshd command-line arguments and configuration file options that
specify time may be expressed using a sequence of the form:
time[qualifier], where time is a positive integer value and qualifier
is one of the following:
<none>,s,m,h,d,w
Examples:
600 600 seconds (10 minutes)
10m 10 minutes
1h30m 1 hour 30 minutes (90 minutes)
ok markus@
|
|
[auth-chall.c auth.h auth1.c auth2-chall.c auth2.c readconf.c
readconf.h servconf.c servconf.h sshconnect1.c sshconnect2.c sshd.c]
improved kbd-interactive support. work by per@appgate.com and me
|
|
[servconf.c]
remove "\n" from fatal()
|
|
(default: off), implies KbdInteractiveAuthentication. Suggestion from
markus@
|
|
[readconf.c servconf.c]
use fatal() or error() vs. fprintf(); ok markus@
|
|
[channels.c channels.h servconf.c servconf.h serverloop.c sshd.8]
Add options ClientAliveInterval and ClientAliveCountMax to sshd.
This gives the ability to do a "keepalive" via the encrypted channel
which can't be spoofed (unlike TCP keepalives). Useful for when you want
to use ssh connections to authenticate people for something, and know
relatively quickly when they are no longer authenticated. Disabled
by default (of course). ok markus@
|
|
[misc.c misc.h readconf.c servconf.c ssh.c sshd.c]
robust port validation; ok markus@ jakob@
|
|
[auth-rhosts.c auth.h auth2.c buffer.c canohost.c canohost.h
compat.c compat.h hostfile.c pathnames.h readconf.c readconf.h
servconf.c servconf.h ssh.c sshconnect.c sshconnect.h sshconnect1.c
sshconnect2.c sshd_config]
implement HostbasedAuthentication (= RhostRSAAuthentication for ssh v2)
similar to RhostRSAAuthentication unless you enable (the experimental)
HostbasedUsesNameFromPacketOnly option. please test. :)
|
|
[servconf.c]
in addition to:
ListenAddress host|ipv4_addr|ipv6_addr
permit:
ListenAddress [host|ipv4_addr|ipv6_addr]:port
ListenAddress host|ipv4_addr:port
sshd.8 updates coming. ok markus@
|
|
[readconf.c servconf.c]
correct comment; ok markus@
|
|
[servconf.c servconf.h session.c sshd.8 sshd_config]
PrintLastLog option; from chip@valinux.com with some minor
changes by me. ok markus@
|
|
[servconf.c]
sync error message; ok markus@
|
|
[authfd.c channels.c dh.c log.c readconf.c servconf.c sftp-int.c
ssh.c sshconnect.c sshd.c]
log functions should not be passed strings that end in newline as they
get passed on to syslog() and when logging to stderr, do_log() appends
its own newline.
|
|
[servconf.c sshd.8]
kill obsolete RandomSeed; ok markus@ deraadt@
|
|
[servconf.c]
grammar; slade@shore.net
|
|
[auth-passwd.c auth.c auth.h auth1.c auth2.c servconf.c servconf.h
ssh-keygen.c sshd.8]
PermitRootLogin={yes,without-password,forced-commands-only,no}
(before this change, root could login even if PermitRootLogin==no)
|
|
[Makefile.in sshd.8 sshconnect2.c readconf.h readconf.c packet.c
sshd.c ssh.c ssh.1 servconf.h servconf.c myproposal.h kex.h kex.c]
1) clean up the MAC support for SSH-2
2) allow you to specify the MAC with 'ssh -m'
3) or the 'MACs' keyword in ssh(d)_config
4) add hmac-{md5,sha1}-96
ok stevesk@, provos@
|
|
|
|
[many files; did this manually to our top-level source dir]
unexpand and remove end-of-line whitespace; ok markus@
|
|
- (djm) OpenBSD CVS sync:
- markus@cvs.openbsd.org 2001/02/03 03:08:38
[auth-options.c auth-rh-rsa.c auth-rhosts.c auth.c canohost.c]
[canohost.h servconf.c servconf.h session.c sshconnect1.c sshd.8]
[sshd_config]
make ReverseMappingCheck optional in sshd_config; ok djm@,dugsong@
- markus@cvs.openbsd.org 2001/02/03 03:19:51
[ssh.1 sshd.8 sshd_config]
Skey is now called ChallengeResponse
- markus@cvs.openbsd.org 2001/02/03 03:43:09
[sshd.8]
use no-pty option in .ssh/authorized_keys* if you need a 8-bit clean
channel. note from Erik.Anggard@cygate.se (pr/1659)
- stevesk@cvs.openbsd.org 2001/02/03 10:03:06
[ssh.1]
typos; ok markus@
- djm@cvs.openbsd.org 2001/02/04 04:11:56
[scp.1 sftp-server.c ssh.1 sshd.8 sftp-client.c sftp-client.h]
[sftp-common.c sftp-common.h sftp-int.c sftp-int.h sftp.1 sftp.c]
Basic interactive sftp client; ok theo@
- (djm) Update RPM specs for new sftp binary
- (djm) Update several bits for new optional reverse lookup stuff. I
think I got them all.
|
|
|
|
[auth1.c auth2.c readconf.c readconf.h servconf.c servconf.h
sshconnect1.c sshconnect2.c sshd.c]
rename skey -> challenge response.
auto-enable kbd-interactive for ssh2 if challenge-reponse is enabled.
|
|
Linux and works. So that is at least a good sign. =)
20010122
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/19 12:45:26 GMT 2001 by markus
[servconf.c ssh.h sshd.c]
only auth-chall.c needs #ifdef SKEY
- markus@cvs.openbsd.org 2001/01/19 15:55:10 GMT 2001 by markus
[auth-krb4.c auth-options.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth1.c auth2.c channels.c clientloop.c dh.c dispatch.c nchan.c
packet.c pathname.h readconf.c scp.c servconf.c serverloop.c
session.c ssh-add.c ssh-keygen.c ssh-keyscan.c ssh.c ssh.h
ssh1.h sshconnect1.c sshd.c ttymodes.c]
move ssh1 definitions to ssh1.h, pathnames to pathnames.h
- markus@cvs.openbsd.org 2001/01/19 16:48:14
[sshd.8]
fix typo; from stevesk@
- markus@cvs.openbsd.org 2001/01/19 16:50:58
[ssh-dss.c]
clear and free digest, make consistent with other code (use dlen); from
stevesk@
- markus@cvs.openbsd.org 2001/01/20 15:55:20 GMT 2001 by markus
[auth-options.c auth-options.h auth-rsa.c auth2.c]
pass the filename to auth_parse_options()
- markus@cvs.openbsd.org 2001/01/20 17:59:40 GMT 2001
[readconf.c]
fix SIGSEGV from -o ""; problem noted by jehsom@togetherweb.com
- stevesk@cvs.openbsd.org 2001/01/20 18:20:29
[sshconnect2.c]
dh_new_group() does not return NULL. ok markus@
- markus@cvs.openbsd.org 2001/01/20 21:33:42
[ssh-add.c]
do not loop forever if askpass does not exist; from
andrew@pimlott.ne.mediaone.net
- djm@cvs.openbsd.org 2001/01/20 23:00:56
[servconf.c]
Check for NULL return from strdelim; ok markus
- djm@cvs.openbsd.org 2001/01/20 23:02:07
[readconf.c]
KNF; ok markus
- jakob@cvs.openbsd.org 2001/01/21 9:00:33
[ssh-keygen.1]
remove -R flag; ok markus@
- markus@cvs.openbsd.org 2001/01/21 19:05:40
[atomicio.c automicio.h auth-chall.c auth-krb4.c auth-options.c
auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth.c auth.h auth1.c auth2-chall.c auth2.c authfd.c authfile.c
bufaux.c bufaux.h buffer.c canahost.c canahost.h channels.c
cipher.c cli.c clientloop.c clientloop.h compat.c compress.c
deattack.c dh.c dispatch.c groupaccess.c hmac.c hostfile.c kex.c
key.c key.h log-client.c log-server.c log.c log.h login.c login.h
match.c misc.c misc.h nchan.c packet.c pty.c radix.h readconf.c
readpass.c readpass.h rsa.c scp.c servconf.c serverloop.c serverloop.h
session.c sftp-server.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c
ssh-keyscan.c ssh-rsa.c ssh.c ssh.h sshconnect.c sshconnect.h
sshconnect1.c sshconnect2.c sshd.c tildexpand.c tildexpand.h
ttysmodes.c uidswap.c xmalloc.c]
split ssh.h and try to cleanup the #include mess. remove unnecessary
#includes. rename util.[ch] -> misc.[ch]
- (bal) renamed 'PIDDIR' to '_PATH_SSH_PIDDIR' to match OpenBSD tree
- (bal) Moved #ifdef KRB4 in auth-krb4.c above the #include to resolve
conflict when compiling for non-kerb install
- (bal) removed the #ifdef SKEY in auth1.c to match Markus' changes
on 1/19.
|
|
20010120
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/19 12:45:26
[ssh-chall.c servconf.c servconf.h ssh.h sshd.c]
only auth-chall.c needs #ifdef SKEY
|
|
that I was able to get all the portable bits in the right location. As for
the SKEY comment there is an email out to Markus as to how it should be
resolved. Until then I just #ifdef SKEY/#endif out the whole block.
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/18 16:20:21
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1 ssh.h
sshd.8 sshd.c]
log() is at pri=LOG_INFO, since LOG_NOTICE goes to /dev/console on many
systems
- markus@cvs.openbsd.org 2001/01/18 16:59:59
[auth-passwd.c auth.c auth.h auth1.c auth2.c serverloop.c session.c
session.h sshconnect1.c]
1) removes fake skey from sshd, since this will be much
harder with /usr/libexec/auth/login_XXX
2) share/unify code used in ssh-1 and ssh-2 authentication (server side)
3) make addition of BSD_AUTH and other challenge reponse methods
easier.
- markus@cvs.openbsd.org 2001/01/18 17:12:43
[auth-chall.c auth2-chall.c]
rename *-skey.c *-chall.c since the files are not skey specific
|
|
- markus@cvs.openbsd.org 2001/01/08 22:29:05
[auth2.c compat.c compat.h servconf.c servconf.h sshd.8
sshd_config version.h]
implement option 'Banner /etc/issue.net' for ssh2, move version to
2.3.1 (needed for bugcompat detection, 2.3.0 would fail if Banner
is enabled).
- markus@cvs.openbsd.org 2001/01/08 22:03:23
[channels.c ssh-keyscan.c]
O_NDELAY -> O_NONBLOCK; thanks stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/08 21:55:41
[sshconnect1.c]
more cleanups and fixes from stevesk@pobox.com:
1) try_agent_authentication() for loop will overwrite key just
allocated with key_new(); don't alloc
2) call ssh_close_authentication_connection() before exit
try_agent_authentication()
3) free mem on bad passphrase in try_rsa_authentication()
- markus@cvs.openbsd.org 2001/01/08 21:48:17
[kex.c]
missing free; thanks stevesk@pobox.com
|
|
- (bal) Fixed another typo in cli.c
- (bal) OpenBSD Sync
- markus@cvs.openbsd.org 2001/01/07 21:26:55
[cli.c]
typo
- markus@cvs.openbsd.org 2001/01/07 21:26:55
[cli.c]
missing free, stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/07 19:06:25
[auth1.c]
missing free, stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/07 11:28:04
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1
ssh.h sshd.8 sshd.c]
rename SYSLOG_LEVEL_INFO->SYSLOG_LEVEL_NOTICE
syslog priority changes:
fatal() LOG_ERR -> LOG_CRIT
log() LOG_INFO -> LOG_NOTICE
|
|
And I think I have all the bits right from the OpenBSD tree.
20001222
- Updated RCSID for pty.c
- (bal) OpenBSD CVS Updates:
- markus@cvs.openbsd.org 2000/12/21 15:10:16
[auth-rh-rsa.c hostfile.c hostfile.h sshconnect.c]
print keyfile:line for changed hostkeys, for deraadt@, ok deraadt@
- markus@cvs.openbsd.org 2000/12/20 19:26:56
[authfile.c]
allow ssh -i userkey for root
- markus@cvs.openbsd.org 2000/12/20 19:37:21
[authfd.c authfd.h kex.c sshconnect2.c sshd.c uidswap.c uidswap.h]
fix prototypes; from stevesk@pobox.com
- markus@cvs.openbsd.org 2000/12/20 19:32:08
[sshd.c]
init pointer to NULL; report from Jan.Ivan@cern.ch
- markus@cvs.openbsd.org 2000/12/19 23:17:54
[auth-krb4.c auth-options.c auth-options.h auth-rhosts.c auth-rsa.c
auth1.c auth2-skey.c auth2.c authfd.c authfd.h authfile.c bufaux.c
bufaux.h buffer.c canohost.c channels.c clientloop.c compress.c
crc32.c deattack.c getput.h hmac.c hmac.h hostfile.c kex.c kex.h
key.c key.h log.c login.c match.c match.h mpaux.c mpaux.h packet.c
packet.h radix.c readconf.c rsa.c scp.c servconf.c servconf.h
serverloop.c session.c sftp-server.c ssh-agent.c ssh-dss.c ssh-dss.h
ssh-keygen.c ssh-keyscan.c ssh-rsa.c ssh-rsa.h ssh.c ssh.h uuencode.c
uuencode.h sshconnect1.c sshconnect2.c sshd.c tildexpand.c]
replace 'unsigned bla' with 'u_bla' everywhere. also replace 'char
unsigned' with u_char.
|
|
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
|
|
- markus@cvs.openbsd.org 2000/10/14 04:01:15
[cipher.c]
debug3
- markus@cvs.openbsd.org 2000/10/14 04:07:23
[scp.c]
remove spaces from arguments; from djm@mindrot.org
- markus@cvs.openbsd.org 2000/10/14 06:09:46
[ssh.1]
Cipher is for SSH-1 only
- markus@cvs.openbsd.org 2000/10/14 06:12:09
[servconf.c servconf.h serverloop.c session.c sshd.8]
AllowTcpForwarding; from naddy@
- markus@cvs.openbsd.org 2000/10/14 06:16:56
[auth2.c compat.c compat.h sshconnect2.c version.h]
OpenSSH_2.3; note that is is not complete, but the version number
needs to be changed for interoperability reasons
- markus@cvs.openbsd.org 2000/10/14 06:19:45
[auth-rsa.c]
do not send RSA challenge if key is not allowed by key-options; from
eivind@ThinkSec.com
- markus@cvs.openbsd.org 2000/10/15 08:14:01
[rijndael.c session.c]
typos; from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2000/10/15 08:18:31
[rijndael.c]
typo
- Copy manpages back over from OpenBSD - too tedious to wade through diffs
|
|
- markus@cvs.openbsd.org 2000/09/30 10:27:44
[log.c]
allow loglevel debug
- markus@cvs.openbsd.org 2000/10/03 11:59:57
[packet.c]
hmac->mac
- markus@cvs.openbsd.org 2000/10/03 12:03:03
[auth-krb4.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth1.c]
move fake-auth from auth1.c to individual auth methods, disables s/key in
debug-msg
- markus@cvs.openbsd.org 2000/10/03 12:16:48
ssh.c
do not resolve canonname, i have no idea why this was added oin ossh
- markus@cvs.openbsd.org 2000/10/09 15:30:44
ssh-keygen.1 ssh-keygen.c
-X now reads private ssh.com DSA keys, too.
- markus@cvs.openbsd.org 2000/10/09 15:32:34
auth-options.c
clear options on every call.
- markus@cvs.openbsd.org 2000/10/09 15:51:00
authfd.c authfd.h
interop with ssh-agent2, from <res@shore.net>
- markus@cvs.openbsd.org 2000/10/10 14:20:45
compat.c
use rexexp for version string matching
- provos@cvs.openbsd.org 2000/10/10 22:02:18
[kex.c kex.h myproposal.h ssh.h ssh2.h sshconnect2.c sshd.c dh.c dh.h]
First rough implementation of the diffie-hellman group exchange. The
client can ask the server for bigger groups to perform the diffie-hellman
in, thus increasing the attack complexity when using ciphers with longer
keys. University of Windsor provided network, T the company.
- markus@cvs.openbsd.org 2000/10/11 13:59:52
[auth-rsa.c auth2.c]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:00:27
[auth-options.h]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:03:27
[scp.1 scp.c]
support 'scp -o' with help from mouring@pconline.com
- markus@cvs.openbsd.org 2000/10/11 14:11:35
[dh.c]
Wall
- markus@cvs.openbsd.org 2000/10/11 14:14:40
[auth.h auth2.c readconf.c readconf.h readpass.c servconf.c servconf.h]
[ssh.h sshconnect2.c sshd_config auth2-skey.c cli.c cli.h]
add support for s/key (kbd-interactive) to ssh2, based on work by
mkiernan@avantgo.com and me
- markus@cvs.openbsd.org 2000/10/11 14:27:24
[auth.c auth1.c auth2.c authfile.c cipher.c cipher.h kex.c kex.h]
[myproposal.h packet.c readconf.c session.c ssh.c ssh.h sshconnect1.c]
[sshconnect2.c sshd.c]
new cipher framework
- markus@cvs.openbsd.org 2000/10/11 14:45:21
[cipher.c]
remove DES
- markus@cvs.openbsd.org 2000/10/12 03:59:20
[cipher.c cipher.h sshconnect1.c sshconnect2.c sshd.c]
enable DES in SSH-1 clients only
- markus@cvs.openbsd.org 2000/10/12 08:21:13
[kex.h packet.c]
remove unused
- markus@cvs.openbsd.org 2000/10/13 12:34:46
[sshd.c]
Kludge for F-Secure Macintosh < 1.0.2; appro@fy.chalmers.se
- markus@cvs.openbsd.org 2000/10/13 12:59:15
[cipher.c cipher.h myproposal.h rijndael.c rijndael.h]
rijndael/aes support
- markus@cvs.openbsd.org 2000/10/13 13:10:54
[sshd.8]
more info about -V
- markus@cvs.openbsd.org 2000/10/13 13:12:02
[myproposal.h]
prefer no compression
|
|
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
|