| Age | Commit message (Collapse) | Author |
|---|
|
This directive has a single valid option "no-touch-required" that
causes sshd to skip checking whether user presence was tested before
a security key signature was made (usually by the user touching the
key).
ok markus@
OpenBSD-Commit-ID: 46e434a49802d4ed82bc0aa38cb985c198c407de
|
|
-C does not match, which allows it to work when sshd_config contains a Match
directive with or without -C. bz#2858, ok djm@
OpenBSD-Commit-ID: 1a701f0a33e3bc96753cfda2fe0b0378520b82eb
|
|
with & ok markus@
OpenBSD-Commit-ID: 126553aecca302c9e02fd77e333b9cb217e623b4
|
|
loading the default hostkeys. Hostkeys explicitly specified in the
configuration or on the command-line are still reported as errors, and
failure to load at least one host key remains a fatal error.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Based on patch from Dag-Erling Smørgrav via
https://github.com/openssh/openssh-portable/pull/103
ok markus@
OpenBSD-Commit-ID: ffc2e35a75d1008effaf05a5e27425041c27b684
|
|
control over which signature algorithms a CA may use when signing
certificates. In particular, this allows a sshd to ban certificates signed
with RSA/SHA1.
ok markus@
OpenBSD-Commit-ID: b05c86ef8b52b913ed48d54a9b9c1a7714d96bac
|
|
OpenBSD-Commit-ID: f3cb4e54bff15c593602d95cc43e32ee1a4bac42
|
|
pattern-list of whitelisted environment variable names in addition to yes|no.
bz#1800, feedback and ok markus@
OpenBSD-Commit-ID: 77dc2b468e0bf04b53f333434ba257008a1fdf24
|
|
administrator to explicitly specify environment variables set in sessions
started by sshd. These override the default environment and any variables set
by user configuration (PermitUserEnvironment, etc), but not the SSH_*
variables set by sshd itself.
ok markus@
OpenBSD-Commit-ID: b6a96c0001ccd7dd211df6cae9e961c20fd718c0
|
|
OpenBSD-Commit-ID: 8650883018d7aa893173d703379e4456a222c672
|
|
addresses may be listened on when the client requests remote forwarding (ssh
-R).
This is the converse of the existing PermitOpen directive and this
includes some refactoring to share much of its implementation.
feedback and ok markus@
OpenBSD-Commit-ID: 15a931238c61a3f2ac74ea18a98c933e358e277f
|
|
establishes a minimum time for each failed authentication attempt (5ms) and
adds a per-user constant derived from a host secret (0-4ms). Based on work
by joona.kannisto at tut.fi, ok markus@ djm@.
OpenBSD-Commit-ID: b7845b355bb7381703339c8fb0e57e81a20ae5ca
|
|
add a "rdomain" criteria for the sshd_config Match
keyword to allow conditional configuration that depends on which rdomain(4) a
connection was recevied on. ok markus@
Upstream-ID: 27d8fd5a3f1bae18c9c6e533afdf99bff887a4fb
|
|
add sshd_config RDomain keyword to place sshd and the
subsequent user session (including the shell and any TCP/IP forwardings) into
the specified rdomain(4)
ok markus@
Upstream-ID: be2358e86346b5cacf20d90f59f980b87d1af0f5
|
|
Add optional rdomain qualifier to sshd_config's
ListenAddress option to allow listening on a different rdomain(4), e.g.
ListenAddress 0.0.0.0 rdomain 4
Upstream-ID: 24b6622c376feeed9e9be8b9605e593695ac9091
|
|
Apply missing commit 1.127 to servconf.h
Upstream-ID: f14c4bac74a2b7cf1e3cff6bea5c447f192a7d15
|
|
Fix PermitOpen crash; spotted by benno@, ok dtucker@ deraadt@
Upstream-ID: c2cc84ffac070d2e1ff76182c70ca230a387983c
|
|
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
|
|
refactor authentication logging
optionally record successful auth methods and public credentials
used in a file accessible to user sessions
feedback and ok markus@
Upstream-ID: 090b93036967015717b9a54fd0467875ae9d32fb
|
|
Add a sshd_config DisableForwaring option that disables
X11, agent, TCP, tunnel and Unix domain socket forwarding, as well as
anything else we might implement in the future.
This, like the 'restrict' authorized_keys flag, is intended to be a
simple and future-proof way of restricting an account. Suggested as
a complement to 'restrict' by Jann Horn; ok markus@
Upstream-ID: 203803f66e533a474086b38a59ceb4cf2410fcf7
|
|
remove UseLogin option and support for having /bin/login
manage login sessions; ok deraadt markus dtucker
Upstream-ID: bea7213fbf158efab7e602d9d844fba4837d2712
|
|
Remove more SSH1 server code: * Drop sshd's -k option. *
Retire configuration keywords that only apply to protocol 1, as well as the
"protocol" keyword. * Remove some related vestiges of protocol 1 support.
ok markus@
Upstream-ID: 9402f82886de917779db12f8ee3f03d4decc244d
|
|
Turn off DSA by default; add HostKeyAlgorithms to the
server and PubkeyAcceptedKeyTypes to the client side, so it still can be
tested or turned back on; feedback and ok djm@
Upstream-ID: 8450a9e6d83f80c9bfed864ff061dfc9323cec21
|
|
add knob to relax GSSAPI host credential check for
multihomed hosts bz#928, patch by Simon Wilkinson; ok dtucker
(kerberos/GSSAPI is not compiled by default on OpenBSD)
Upstream-ID: 15ddf1c6f7fd9d98eea9962f480079ae3637285d
|
|
add AuthorizedPrincipalsCommand that allows getting
authorized_principals from a subprocess rather than a file, which is quite
useful in deployments with large userbases
feedback and ok markus@
Upstream-ID: aa1bdac7b16fc6d2fa3524ef08f04c7258d247f6
|
|
Allow ListenAddress, Port and AddressFamily in any
order. bz#68, ok djm@, jmc@ (for the man page bit).
|
|
add sshd_config HostbasedAcceptedKeyTypes and
PubkeyAcceptedKeyTypes options to allow sshd to control what public key types
will be accepted. Currently defaults to all. Feedback & ok markus@
|
|
Add FingerprintHash option to control algorithm used for
key fingerprints. Default changes from MD5 to SHA256 and format from hex to
base64.
Feedback and ok naddy@ markus@
|
|
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
|
|
[servconf.c servconf.h session.c sshd.8 sshd_config.5]
Add a sshd_config PermitUserRC option to control whether ~/.ssh/rc is
executed, mirroring the no-user-rc authorized_keys option;
bz#2160; ok markus@
|
|
[Makefile.in auth.h auth2-jpake.c auth2.c jpake.c jpake.h monitor.c]
[monitor.h monitor_wrap.c monitor_wrap.h readconf.c readconf.h]
[schnorr.c schnorr.h servconf.c servconf.h ssh2.h sshconnect2.c]
remove experimental, never-enabled JPAKE code; ok markus@
|
|
[servconf.c servconf.h]
bz#2161 - fix AuthorizedKeysCommand inside a Match block and
rearrange things so the same error is harder to make next time;
with and ok dtucker@
|
|
[servconf.c servconf.h session.c sshd_config sshd_config.5]
shd_config PermitTTY to disallow TTY allocation, mirroring the
longstanding no-pty authorized_keys option;
bz#2070, patch from Teran McKinney; ok markus@
|
|
[auth.h kex.h kexdhs.c kexecdhs.c kexgexs.c monitor.c servconf.c]
[servconf.h session.c sshd.c sshd_config.5]
add ssh-agent(1) support to sshd(8); allows encrypted hostkeys,
or hostkeys on smartcards; most of the work by Zev Weiss; bz #1974
ok djm@
|
|
[sshd_config.5 servconf.c servconf.h packet.c serverloop.c monitor.c sshd_config
sshd.c] Add RekeyLimit to sshd with the same syntax as the client allowing
rekeying based on traffic volume or time. ok djm@, help & ok jmc@ for the man
page.
|
|
[servconf.h]
add a couple of ServerOptions members that should be copied to the privsep
child (for consistency, in this case they happen only to be accessed in
the monitor); ok dtucker@
|
|
[auth-options.c channels.c servconf.c servconf.h serverloop.c session.c]
[sshd_config.5]
make AllowTcpForwarding accept "local" and "remote" in addition to its
current "yes"/"no" to allow the server to specify whether just local or
remote TCP forwarding is enabled. ok markus@
|
|
[auth.h auth1.c auth2.c monitor.c servconf.c servconf.h sshd.c]
[sshd_config.5]
Support multiple required authentication via an AuthenticationMethods
option. This option lists one or more comma-separated lists of
authentication method names. Successful completion of all the methods in
any list is required for authentication to complete;
feedback and ok markus@
|
|
[auth-rsa.c auth.c auth.h auth2-pubkey.c servconf.c servconf.h]
[sshd.c sshd_config sshd_config.5]
new sshd_config option AuthorizedKeysCommand to support fetching
authorized_keys from a command in addition to (or instead of) from
the filesystem. The command is run as the target server user unless
another specified via a new AuthorizedKeysCommandUser option.
patch originally by jchadima AT redhat.com, reworked by me; feedback
and ok markus@
|
|
[servconf.c servconf.h sshd.c sshd_config]
Turn on systrace sandboxing of pre-auth sshd by default for new installs
by shipping a config that overrides the current UsePrivilegeSeparation=yes
default. Make it easier to flip the default in the future by adding too.
|
|
[servconf.c servconf.h sshd_config.5]
sshd_config: extend Match to allow AcceptEnv and {Allow,Deny}{Users,Groups}
this allows 'Match LocalPort 1022' combined with 'AllowUser bauer'
ok djm@ (back in March)
|
|
- dtucker@cvs.openbsd.org 2012/05/13 01:42:32
[servconf.h servconf.c sshd.8 sshd.c auth.c sshd_config.5]
Add "Match LocalAddress" and "Match LocalPort" to sshd and adjust tests
to match. Feedback and ok djm@ markus@.
|
|
[servconf.c servconf.h sshd.c sshd_config sshd_config.5]
VersionAddendum option to allow server operators to append some arbitrary
text to the SSH-... banner; ok deraadt@ "don't care" markus@
|
|
[servconf.c servconf.h sshd.c sshd_config.5 sandbox-rlimit.c]
[sandbox-systrace.c sandbox.h configure.ac Makefile.in]
introduce sandboxing of the pre-auth privsep child using systrace(4).
This introduces a new "UsePrivilegeSeparation=sandbox" option for
sshd_config that applies mandatory restrictions on the syscalls the
privsep child can perform. This prevents a compromised privsep child
from being used to attack other hosts (by opening sockets and proxying)
or probing local kernel attack surface.
The sandbox is implemented using systrace(4) in unsupervised "fast-path"
mode, where a list of permitted syscalls is supplied. Any syscall not
on the list results in SIGKILL being sent to the privsep child. Note
that this requires a kernel with the new SYSTR_POLICY_KILL option.
UsePrivilegeSeparation=sandbox will become the default in the future
so please start testing it now.
feedback dtucker@; ok markus@
|
|
- djm@cvs.openbsd.org 2011/05/23 03:30:07
[auth-rsa.c auth.c auth.h auth2-pubkey.c monitor.c monitor_wrap.c pathnames.h servconf.c servconf.h sshd.8 sshd_config sshd_config.5]
allow AuthorizedKeysFile to specify multiple files, separated by spaces.
Bring back authorized_keys2 as a default search path (to avoid breaking
existing users of this file), but override this in sshd_config so it will
be no longer used on fresh installs. Maybe in 2015 we can remove it
entierly :)
feedback and ok markus@ dtucker@
|
|
[monitor.c monitor_wrap.c servconf.c servconf.h]
use a macro to define which string options to copy between configs
for Match. This avoids problems caused by forgetting to keep three
code locations in perfect sync and ordering
"this is at once beautiful and horrible" + ok dtucker@
|
|
[auth.c auth.h auth2-pubkey.c pathnames.h servconf.c servconf.h]
remove support for authorized_keys2; it is a relic from the early days
of protocol v.2 support and has been undocumented for many years;
ok markus@
|
|
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
|
|
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
|
|
[auth-options.c auth-options.h auth.c auth.h auth2-pubkey.c]
[key.c servconf.c servconf.h sshd.8 sshd_config.5]
add some optional indirection to matching of principal names listed
in certificates. Currently, a certificate must include the a user's name
to be accepted for authentication. This change adds the ability to
specify a list of certificate principal names that are acceptable.
When authenticating using a CA trusted through ~/.ssh/authorized_keys,
this adds a new principals="name1[,name2,...]" key option.
For CAs listed through sshd_config's TrustedCAKeys option, a new config
option "AuthorizedPrincipalsFile" specifies a per-user file containing
the list of acceptable names.
If either option is absent, the current behaviour of requiring the
username to appear in principals continues to apply.
These options are useful for role accounts, disjoint account namespaces
and "user@realm"-style naming policies in certificates.
feedback and ok markus@
|
|
[auth-rh-rsa.c auth-rsa.c auth.c auth.h auth2-hostbased.c auth2-pubkey.c]
[authfile.c authfile.h hostfile.c hostfile.h servconf.c servconf.h]
[ssh-keygen.c ssh.1 sshconnect.c sshd_config.5]
Add a TrustedUserCAKeys option to sshd_config to specify CA keys that
are trusted to authenticate users (in addition than doing it per-user
in authorized_keys).
Add a RevokedKeys option to sshd_config and a @revoked marker to
known_hosts to allow keys to me revoked and banned for user or host
authentication.
feedback and ok markus@
|
