| Age | Commit message (Collapse) | Author |
|---|
|
- Add key blacklisting support. Keys listed in
/etc/ssh/blacklist.TYPE-LENGTH will be rejected for authentication by
sshd, unless "PermitBlacklistedKeys yes" is set in
/etc/ssh/sshd_config.
- Add a new program, ssh-vulnkey, which can be used to check keys
against these blacklists.
- Depend on openssh-blacklist.
- Force dependencies on libssl0.9.8 / libcrypto0.9.8-udeb to at least
0.9.8g-9.
- Automatically regenerate known-compromised host keys, with a
critical-priority debconf note. (I regret that there was no time to
gather translations.)
|
|
changes not previously backported to 4.3p2:
- 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4):
+ On portable OpenSSH, fix a GSSAPI authentication abort that could be
used to determine the validity of usernames on some platforms.
+ Implemented conditional configuration in sshd_config(5) using the
"Match" directive. This allows some configuration options to be
selectively overridden if specific criteria (based on user, group,
hostname and/or address) are met. So far a useful subset of
post-authentication options are supported and more are expected to
be added in future releases.
+ Add support for Diffie-Hellman group exchange key agreement with a
final hash of SHA256.
+ Added a "ForceCommand" directive to sshd_config(5). Similar to the
command="..." option accepted in ~/.ssh/authorized_keys, this forces
the execution of the specified command regardless of what the user
requested. This is very useful in conjunction with the new "Match"
option.
+ Add a "PermitOpen" directive to sshd_config(5). This mirrors the
permitopen="..." authorized_keys option, allowing fine-grained
control over the port-forwardings that a user is allowed to
establish.
+ Add optional logging of transactions to sftp-server(8).
+ ssh(1) will now record port numbers for hosts stored in
~/.ssh/known_hosts when a non-standard port has been requested
(closes: #50612).
+ Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a
non-zero exit code) when requested port forwardings could not be
established.
+ Extend sshd_config(5) "SubSystem" declarations to allow the
specification of command-line arguments.
+ Replacement of all integer overflow susceptible invocations of
malloc(3) and realloc(3) with overflow-checking equivalents.
+ Many manpage fixes and improvements.
+ Add optional support for OpenSSL hardware accelerators (engines),
enabled using the --with-ssl-engine configure option.
+ Tokens in configuration files may be double-quoted in order to
contain spaces (closes: #319639).
+ Move a debug() call out of a SIGCHLD handler, fixing a hang when the
session exits very quickly (closes: #307890).
+ Fix some incorrect buffer allocation calculations (closes: #410599).
+ ssh-add doesn't ask for a passphrase if key file permissions are too
liberal (closes: #103677).
+ Likewise, ssh doesn't ask either (closes: #99675).
- 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6):
+ sshd now allows the enabling and disabling of authentication methods
on a per user, group, host and network basis via the Match directive
in sshd_config.
+ Fixed an inconsistent check for a terminal when displaying scp
progress meter (closes: #257524).
+ Fix "hang on exit" when background processes are running at the time
of exit on a ttyful/login session (closes: #88337).
* Update to current GSSAPI patch from
http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch;
install ChangeLog.gssapi.
|
|
[monitor_wrap.c servconf.c servconf.h monitor.c sshd_config.5]
Teach Match how handle config directives that are used before
authentication. This allows configurations such as permitting password
authentication from the local net only while requiring pubkey from
offsite. ok djm@, man page bits ok jmc@
|
|
[servconf.c servconf.h sshd_config.5]
Add ability to match groups to Match keyword in sshd_config. Feedback
djm@, stevesk@, ok stevesk@.
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[channels.c channels.h servconf.c servconf.h sshd_config.5]
Make PermitOpen take a list of permitted ports and act more like most
other keywords (ie the first match is the effective setting). This
also makes it easier to override a previously set PermitOpen. ok djm@
|
|
[servconf.c servconf.h session.c sshd.8 sshd_config sshd_config.5]
Add ForceCommand keyword to sshd_config, equivalent to the "command="
key option, man page entry and example in sshd_config.
Feedback & ok djm@, man page corrections & ok jmc@
|
|
[sshd.c servconf.h servconf.c sshd_config.5 auth.c]
Add support for conditional directives to sshd_config via a "Match"
keyword, which works similarly to the "Host" directive in ssh_config.
Lines after a Match line override the default set in the main section
if the condition on the Match line is true, eg
AllowTcpForwarding yes
Match User anoncvs
AllowTcpForwarding no
will allow port forwarding by all users except "anoncvs".
Currently only a very small subset of directives are supported.
ok djm@
|
|
[servconf.c servconf.h session.c sshd_config.5]
support arguments to Subsystem commands; ok markus@
|
|
http://www.sxw.org.uk/computing/patches/openssh-4.3p2-gsskex-20060223.patch
(closes: #352042).
|
|
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h]
[bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h]
[compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h]
[dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c]
[gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h]
[misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h]
[myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h]
[scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h]
[ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h]
[ttymodes.h uidswap.h uuencode.h xmalloc.h]
standardise spacing in $OpenBSD$ tags; requested by deraadt@
|
|
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
|
|
[servconf.c servconf.h sshd.c sshd_config sshd_config.5]
bz #898: support AddressFamily in sshd_config. from
peak@argo.troja.mff.cuni.cz; ok deraadt@
|
|
[servconf.c servconf.h sshd.c]
re-exec sshd on accept(); initial work, final debugging and ok markus@
|
|
[auth.c auth.h auth1.c auth2.c servconf.c servconf.h sshd_config sshd_config.5]
Add MaxAuthTries sshd config option; ok markus@
|
|
[readconf.c readconf.h servconf.c servconf.h session.c session.h ssh.c
ssh_config.5 sshd_config.5]
bz #815: implement ability to pass specified environment variables from
the client to the server; ok markus@
|
|
[servconf.c servconf.h session.c sshd_config]
implement KerberosGetAFSToken server option. ok markus@, beck@
|
|
[readconf.c readconf.h scp.1 servconf.c servconf.h sftp.1 ssh.1]
[ssh_config.5 sshconnect.c sshd.c sshd_config.5]
rename keepalive to tcpkeepalive; the old name causes too much
confusion; ok djm, dtucker; with help from jmc@
|
|
[readconf.c readconf.h servconf.c servconf.h ssh.c]
remove unused kerberos code; ok henning@
|
|
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
|
|
[auth1.c readconf.c readconf.h servconf.c servconf.h ssh.c ssh_config
ssh_config.5 sshconnect1.c sshd.8 sshd.c sshd_config sshd_config.5]
remove RhostsAuthentication; suggested by djm@ before; ok djm@, deraadt@,
fgsch@, miod@, henning@, jakob@ and others
|
|
- markus@cvs.openbsd.org 2003/07/22 13:35:22
[auth1.c auth.h auth-passwd.c monitor.c monitor.h monitor_wrap.c
monitor_wrap.h readconf.c readconf.h servconf.c servconf.h session.c ssh.1
ssh.c ssh_config.5 sshconnect1.c sshd.c sshd_config.5 ssh.h]
remove (already disabled) KRB4/AFS support, re-enable -k in ssh(1);
test+ok henning@
- (dtucker) [Makefile.in acconfig.h configure.ac] Remove KRB4/AFS support.
- (dtucker) [auth-krb4.c radix.c radix.h] Remove KRB4/AFS specific files.
I hope I got this right....
|
|
- markus@cvs.openbsd.org 2003/06/02 09:17:34
[auth2-hostbased.c auth.c auth-options.c auth-rhosts.c auth-rh-rsa.c]
[canohost.c monitor.c servconf.c servconf.h session.c sshd_config]
[sshd_config.5]
deprecate VerifyReverseMapping since it's dangerous if combined
with IP based access control as noted by Mike Harding; replace with
a UseDNS option, UseDNS is on by default and includes the
VerifyReverseMapping check; with itojun@, provos@, jakob@ and deraadt@
ok deraadt@, djm@
- (djm) Fix portable-specific uses of verify_reverse_mapping too
|
|
[readconf.c readconf.h servconf.c servconf.h]
always parse kerberos options. ok djm@ markus@
- (djm) Always parse UsePAM
|
|
over usage of PAM. This allows non-root use of sshd when built with
--with-pam
|
|
[auth-options.c servconf.c servconf.h session.c sshd_config sshd_config.5]
add PermitUserEnvironment (off by default!); from dot@dotat.at;
ok provos, deraadt
|
|
[servconf.c servconf.h session.c sshd.c]
allow Compression=yes/no in sshd_config
|
|
[servconf.c servconf.h ssh.h sshd.c]
for unprivileged user, group do:
pw=getpwnam(SSH_PRIVSEP_USER); do_setusercontext(pw). ok provos@
|
|
[pathnames.h servconf.c servconf.h sshd.c]
_PATH_PRIVSEP_CHROOT_DIR; ok provos@
|
|
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h
auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c
session.h servconf.h serverloop.c session.c sshd.c]
integrate privilege separated openssh; its turned off by default for now.
work done by me and markus@
applied, but outside of ensure that smaller code bits migrated with
their owners.. no work was tried to 'fix' it to work. =) Later project!
|
|
[auth-krb5.c auth-options.h auth.h authfd.h authfile.h bufaux.h buffer.h
channels.h cipher.h compat.h compress.h crc32.h deattack.c getput.h
groupaccess.c misc.c mpaux.h packet.h readconf.h rsa.h scard.h
servconf.h ssh-agent.c ssh.h ssh2.h sshpty.h sshtty.c ttymodes.h
uuencode.c xmalloc.h]
$OpenBSD$ and RCSID() cleanup: don't use RCSID() in .h files; add
missing RCSID() to .c files and remove dup /*$OpenBSD$*/ from .c
files. ok markus@
|
|
[auth2.c auth.c auth-options.c auth-rhosts.c auth-rh-rsa.c canohost.c servconf.c servconf.h session.c sshd.8 sshd_config]
s/ReverseMappingCheck/VerifyReverseMapping/ and avoid confusion; ok stevesk@
|
|
[channels.c servconf.c servconf.h session.c sshd.8 sshd_config]
add X11UseLocalhost; ok markus@
|
|
[auth1.c auth2.c auth2-chall.c auth-bsdauth.c auth.c authfile.c auth.h]
[auth-krb4.c auth-rhosts.c auth-skey.c bufaux.c canohost.c channels.c]
[cipher.c clientloop.c compat.c compress.c deattack.c key.c log.c mac.c]
[match.c misc.c nchan.c packet.c readconf.c rijndael.c rijndael.h scard.c]
[servconf.c servconf.h serverloop.c session.c sftp.c sftp-client.c]
[sftp-glob.c sftp-int.c sftp-server.c ssh-add.c ssh-agent.c ssh.c]
[sshconnect1.c sshconnect2.c sshconnect.c sshd.8 sshd.c sshd_config]
[ssh-keygen.c sshlogin.c sshpty.c sshtty.c ttymodes.c uidswap.c]
basic KNF done while i was looking for something else
|
|
[servconf.c servconf.h sshd.8 sshd.c]
add -o to sshd, too. ok deraadt@
- (bal) Minor white space fix up in servconf.c
|
|
[servconf.h]
typo in comment
|
|
[servconf.c servconf.h session.c sshd.8]
deprecate CheckMail. ok markus@
|
|
|
|
[authfd.h authfile.h auth.h auth-options.h bufaux.h buffer.h
canohost.h channels.h cipher.h clientloop.h compat.h compress.h
crc32.h deattack.h dh.h dispatch.h groupaccess.c groupaccess.h
hostfile.h kex.h key.h log.c log.h mac.h misc.c misc.h mpaux.h
packet.h radix.h readconf.h readpass.h rsa.h servconf.h serverloop.h
session.h sftp-common.c sftp-common.h sftp-glob.h sftp-int.h
sshconnect.h ssh-dss.h sshlogin.h sshpty.h ssh-rsa.h sshtty.h
tildexpand.h uidswap.h uuencode.h xmalloc.h]
remove comments from .h, since they are cut&paste from the .c files
and out of sync
|
|
[auth1.c auth.h auth-krb4.c auth-passwd.c readconf.c readconf.h
servconf.c servconf.h session.c sshconnect1.c sshd.c]
Kerberos v5 support for SSH1, mostly from Assar Westerlund
<assar@freebsd.org> and Bjorn Gronvall <bg@sics.se>. markus@ ok
|
|
[servconf.h serverloop.h session.h sftp-client.h sftp-common.h
sftp-glob.h sftp-int.h sshconnect.h ssh-dss.h sshlogin.h sshpty.h
ssh-rsa.h tildexpand.h uidswap.h uuencode.h xmalloc.h]
prototype pedant. not very creative...
- () -> (void)
- no variable names
|
|
[kexdh.c kexgex.c kex.h pathnames.h readconf.c servconf.h ssh.1
sshconnect1.c sshconnect2.c sshconnect.c sshconnect.h sshd.8]
get rid of known_hosts2, use it for hostkey lookup, but do not
modify.
|
|
[auth-rsa.c auth.c auth.h auth2.c servconf.c servconf.h sshd.8
sshd_config]
configurable authorized_keys{,2} location; originally from peter@;
ok djm@
|
|
[auth-chall.c auth.h auth1.c auth2-chall.c auth2.c readconf.c
readconf.h servconf.c servconf.h sshconnect1.c sshconnect2.c sshd.c]
improved kbd-interactive support. work by per@appgate.com and me
|
|
(default: off), implies KbdInteractiveAuthentication. Suggestion from
markus@
|
|
[channels.c channels.h servconf.c servconf.h serverloop.c sshd.8]
Add options ClientAliveInterval and ClientAliveCountMax to sshd.
This gives the ability to do a "keepalive" via the encrypted channel
which can't be spoofed (unlike TCP keepalives). Useful for when you want
to use ssh connections to authenticate people for something, and know
relatively quickly when they are no longer authenticated. Disabled
by default (of course). ok markus@
|
|
[auth-rhosts.c auth.h auth2.c buffer.c canohost.c canohost.h
compat.c compat.h hostfile.c pathnames.h readconf.c readconf.h
servconf.c servconf.h ssh.c sshconnect.c sshconnect.h sshconnect1.c
sshconnect2.c sshd_config]
implement HostbasedAuthentication (= RhostRSAAuthentication for ssh v2)
similar to RhostRSAAuthentication unless you enable (the experimental)
HostbasedUsesNameFromPacketOnly option. please test. :)
|
|
[servconf.c servconf.h session.c sshd.8 sshd_config]
PrintLastLog option; from chip@valinux.com with some minor
changes by me. ok markus@
|
|
[auth-passwd.c auth.c auth.h auth1.c auth2.c servconf.c servconf.h
ssh-keygen.c sshd.8]
PermitRootLogin={yes,without-password,forced-commands-only,no}
(before this change, root could login even if PermitRootLogin==no)
|
|
[Makefile.in sshd.8 sshconnect2.c readconf.h readconf.c packet.c
sshd.c ssh.c ssh.1 servconf.h servconf.c myproposal.h kex.h kex.c]
1) clean up the MAC support for SSH-2
2) allow you to specify the MAC with 'ssh -m'
3) or the 'MACs' keyword in ssh(d)_config
4) add hmac-{md5,sha1}-96
ok stevesk@, provos@
|
