| Age | Commit message (Collapse) | Author |
|---|
|
[serverloop.c]
Cast signal to int for logging. A no-op on openbsd (they're always ints)
but will prevent warnings in portable. ok djm@
|
|
[auth-options.c channels.c servconf.c servconf.h serverloop.c session.c]
[sshd_config.5]
make AllowTcpForwarding accept "local" and "remote" in addition to its
current "yes"/"no" to allow the server to specify whether just local or
remote TCP forwarding is enabled. ok markus@
|
|
[clientloop.c serverloop.c]
initialise accept() backoff timer to avoid EINVAL from select(2) in
rekeying
|
|
[channels.c channels.h clientloop.c serverloop.c]
don't spin in accept() when out of fds (ENFILE/ENFILE) - back off for a
while; ok deraadt@ markus@
|
|
- djm@cvs.openbsd.org 2011/05/15 08:09:01
[authfd.c monitor.c serverloop.c]
use FD_CLOEXEC consistently; patch from zion AT x96.org
|
|
(-R 0:...); bz#1578, spotted and fix by gavin AT emf.net; ok dtucker@
|
|
[sshd.c packet.c serverloop.c monitor_wrap.c clientloop.c sshconnect.c
monitor.c Added roaming.h roaming_common.c roaming_dummy.c]
Keep track of number of bytes read and written. Needed for upcoming
changes. Most code from Martin Forssen, maf at appgate dot com.
ok markus@
Also, applied appropriate changes to Makefile.in
|
|
[canohost.h canohost.c]
Add clear_cached_addr(), needed for upcoming changes allowing the peer
address to change.
ok markus@
|
|
[serverloop.c]
tighten check for -R0:... forwarding: only allow dynamic allocation
if want_reply is set in the packet
|
|
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c]
[readconf.h serverloop.c ssh.c]
support remote port forwarding with a zero listen port (-R0:...) to
dyamically allocate a listen port at runtime (this is actually
specified in rfc4254); bz#1003 ok markus@
|
|
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
|
|
[serverloop.c]
backout 1.149, since it's not necessary and openssh clients send
broken CHANNEL_FAILURE/SUCCESS messages since about 2004; ok djm@
|
|
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c]
[sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on
some platforms (HP nonstop) it is a distinct errno;
bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
|
|
[serverloop.c]
only pass channel requests on session channels through to the session
channel handler, avoiding spurious log messages; ok! markus@
|
|
takes 2 more args. with djm@
|
|
[PROTOCOL ssh.c serverloop.c]
Add a no-more-sessions@openssh.com global request extension that the
client sends when it knows that it will never request another session
(i.e. when session multiplexing is disabled). This allows a server to
disallow further session requests and terminate the session.
Why would a non-multiplexing client ever issue additional session
requests? It could have been attacked with something like SSH'jack:
http://www.storm.net.nz/projects/7
feedback & ok markus
|
|
[channels.h clientloop.c nchan.c serverloop.c]
unbreak
ssh -2 localhost od /bin/ls | true
ignoring SIGPIPE by adding a new channel message (EOW) that signals
the peer that we're not interested in any data it might send.
fixes bz #85; discussion, debugging and ok djm@
|
|
[channels.c channels.h clientloop.c serverloop.c]
Try additional addresses when connecting to a port forward destination
whose DNS name resolves to more than one address. The previous behaviour
was to try the first address and give up.
Reported by stig AT venaas.com in bz#343
great feedback and ok markus@
|
|
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
|
|
[clientloop.c packet.c packet.h serverloop.c]
Allow all SSH2 packet types, including UNIMPLEMENTED to reset the
keepalive timer (bz #1307). ok markus@
|
|
[clientloop.c packet.c serverloop.c]
Revert the change for bz #1307 as it causes connection aborts if an IGNORE
packet arrives while we're waiting in packet_read_expect (and possibly
elsewhere).
|
|
[clientloop.c serverloop.c packet.c]
Make SSH2_MSG_UNIMPLEMENTED and SSH2_MSG_IGNORE messages reset the
ServerAlive and ClientAlive timers. Prevents dropping a connection
when these are enabled but the peer does not support our keepalives.
bz #1307, ok djm@.
|
|
when closing a tty session when a background process still holds tty
fds open. Great detective work and patch by Marc Aurele La France,
slightly tweaked by me; ok dtucker@
|
|
[clientloop.c serverloop.c]
exit instead of doing a blocking tcp send if we detect a client/server
timeout, since the tcp sendqueue might be already full (of alive
requests); ok dtucker, report mpf
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[atomicio.c auth.c dh.c authfile.c buffer.c clientloop.c kex.c]
[groupaccess.c gss-genr.c kexgexs.c misc.c monitor.c monitor_mm.c]
[packet.c scp.c serverloop.c session.c sftp-client.c sftp-common.c]
[sftp-server.c sftp.c ssh-add.c ssh-agent.c ssh-keygen.c sshlogin.c]
[uidswap.c xmalloc.c]
move #include <sys/param.h> out of includes.h
|
|
[channels.c clientloop.c packet.c scp.c serverloop.c sftp-client.c]
[sftp-server.c ssh-agent.c ssh-keyscan.c sshconnect.c sshd.c]
move #include <sys/time.h> out of includes.h
|
|
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c]
[auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c]
[authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c]
[cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c]
[compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c]
[includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c]
[progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c]
move #include <string.h> out of includes.h
|
|
[auth1.c serverloop.c session.c sshconnect2.c]
missed some needed #include <unistd.h> when KERBEROS5=no; issue from
massimo@cedoc.mo.it
|
|
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c
sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c
includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c
sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c
ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c]
move #include <errno.h> out of includes.h; ok markus@
|
|
[auth2-none.c authfd.c authfile.c includes.h misc.c monitor.c]
[readpass.c scp.c serverloop.c sftp-client.c sftp-server.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
[sshlogin.c sshpty.c]
move #include <fcntl.h> out of includes.h
|
|
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c]
[auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c]
[auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c]
[monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c]
[session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c]
[ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c]
[uidswap.h]
move #include <pwd.h> out of includes.h; ok markus@
|
|
[canohost.c hostfile.c includes.h misc.c packet.c readconf.c]
[serverloop.c sshconnect.c uuencode.c]
move #include <netinet/in.h> out of includes.h; ok deraadt@
(also ssh-rand-helper.c logintest.c loginrec.c)
|
|
only, otherwise sshd can hang exiting non-interactive sessions.
|
|
#1102 workaround.
|
|
4.3.3 ML3 or so, the AIX pty layer starting passing zero-length writes
on the pty slave as zero-length reads on the pty master, which sshd
interprets as the descriptor closing. Since most things don't do zero
length writes this rarely matters, but occasionally it happens, and when
it does the SSH pty session appears to hang, so we add a special case for
this condition. ok djm@
|
|
[clientloop.c serverloop.c]
spacing
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c]
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c]
[auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c]
[buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c]
[cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c]
[deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c]
[kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c]
[readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c]
[sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c]
Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that
Theo nuked - our scripts to sync -portable need them in the files
|
|
[channels.c fatal.c kex.c packet.c serverloop.c]
spacing
|
|
[channels.c clientloop.c monitor_wrap.c monitor_wrap.h serverloop.c]
[ssh.c sshpty.c sshpty.h]
sprinkle u_int throughout pty subsystem, ok markus
|
|
[clientloop.c progressmeter.c serverloop.c sshd.c]
ARGSUSED for signal handlers
|
|
[serverloop.c]
memory leaks detected by Coverity via elad AT netbsd.org;
ok deraadt@ dtucker@
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c]
[auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c]
[auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c]
[auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c]
[canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c]
[groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c]
[kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c]
[loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c]
[nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c]
[scard.c scp.c servconf.c serverloop.c session.c sftp-client.c]
[sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c]
[openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c]
[openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c]
[openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c]
[openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c]
RCSID() can die
|
|
[serverloop.c]
move a debug() outside of a signal handler; ok markus@ a little while back
|
|
- stevesk@cvs.openbsd.org 2006/02/20 17:02:44
[clientloop.c includes.h monitor.c progressmeter.c scp.c]
[serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c]
move #include <signal.h> out of includes.h; ok markus@
the previous was:
- stevesk@cvs.openbsd.org 2006/02/20 17:19:54
[auth-rhosts.c auth-rsa.c auth.c auth2-none.c auth2-pubkey.c]
[authfile.c clientloop.c includes.h readconf.c scp.c session.c]
[sftp-client.c sftp-common.c sftp-common.h sftp-glob.c]
[sftp-server.c sftp.c ssh-add.c ssh-keygen.c ssh.c sshconnect.c]
[sshconnect2.c sshd.c sshpty.c]
move #include <sys/stat.h> out of includes.h; ok markus@
|
|
[includes.h monitor.c readpass.c scp.c serverloop.c session.c^?]
[sftp.c sshconnect.c sshconnect2.c sshd.c]
move #include <sys/wait.h> out of includes.h; ok markus@
|
|
[channels.c clientloop.c clientloop.h includes.h packet.h]
[serverloop.c sshpty.c sshpty.h sshtty.c ttymodes.c]
move #include <termios.h> out of includes.h; ok markus@
|
|
[serverloop.c ssh.c openbsd-compat/Makefile.in]
[openbsd-compat/openbsd-compat.h] Implement tun(4) forwarding
compatability support for Linux, diff from reyk@
|
|
- reyk@cvs.openbsd.org 2005/12/13 15:03:02
[serverloop.c]
if forced_tun_device is not set, it is -1 and not SSH_TUNID_ANY
|
|
[auth-options.c includes.h misc.c misc.h readconf.c servconf.c]
[serverloop.c ssh.c ssh_config.5 sshd_config.5 configure.ac]
two changes to the new ssh tunnel support. this breaks compatibility
with the initial commit but is required for a portable approach.
- make the tunnel id u_int and platform friendly, use predefined types.
- support configuration of layer 2 (ethernet) or layer 3
(point-to-point, default) modes. configuration is done using the
Tunnel (yes|point-to-point|ethernet|no) option is ssh_config(5) and
restricted by the PermitTunnel (yes|point-to-point|ethernet|no) option
in sshd_config(5).
ok djm@, man page bits by jmc@
|
