Age | Commit message (Collapse) | Author |
|
setup error path with user's privileged. This is a no-op as this code always
runs with user privilege now that we no longer support running sshd with
privilege separation disabled, but as long as the privsep skeleton is there
we should follow the rules.
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
bz#2969 with patch from Erik Sjölund
OpenBSD-Commit-ID: 2b708401a5a8d6133c865d7698d9852210dca846
|
|
command when ForceCommand=internal-sftp is in effect; bz2960; ok dtucker@
OpenBSD-Commit-ID: 8c87fa66d7fc6c0fffa3a3c28e8ab5e8dde234b8
|
|
PAM typically specifies the user environment if it's enabled, so don't
second guess. bz#2937; ok dtucker@
|
|
API. This code is not normally reachable since USE_PIPES is always defined.
bz#2961, patch from adrian.fita at gmail com.
OpenBSD-Commit-ID: 8d8428d678d1d5eb4bb21921df34e8173e6d238a
|
|
|
|
with & ok markus@
OpenBSD-Commit-ID: fae817207e23099ddd248960c984f7b7f26ea68e
|
|
with & ok markus@
OpenBSD-Commit-ID: 7e10359f614ff522b52a3f05eec576257794e8e4
|
|
API, started almost exactly six years ago.
This change stops including the old packet_* API by default and makes
each file that requires the old API include it explicitly. We will
commit file-by-file refactoring to remove the old API in consistent
steps.
with & ok markus@
OpenBSD-Commit-ID: 93c98a6b38f6911fd1ae025a1ec57807fb4d4ef4
|
|
=?UTF-8?q?e=20extern;=20from=20Hanno=20B=C3=B6ck?=
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
OpenBSD-Commit-ID: d53dede6e521161bf04d39d09947db6253a38271
|
|
This makes the connection 4-tuple available to PAM modules that
wish to use it in decision-making. bz#2741
|
|
OpenBSD-Commit-ID: 482ce71a5ea5c5f3bc4d00fd719481a6a584d925
|
|
disposition of channel's extended (stderr) fd; makes debugging some things a
bit easier. No behaviour change.
OpenBSD-Commit-ID: 483eb6467dc7d5dbca8eb109c453e7a43075f7ce
|
|
|
|
channel/ session protocol. Signalling is only supported to sesssions that are
not subsystems and were not started with a forced command.
Long requested in bz#1424
Based on a patch from markus@ and reworked by dtucker@;
ok markus@ dtucker@
OpenBSD-Commit-ID: 4bea826f575862eaac569c4bedd1056a268be1c3
|
|
OpenBSD-Commit-ID: b5149a6d92b264d35f879d24608087b254857a83
|
|
OpenBSD-Commit-ID: 2b1f9619259e222bbd4fe9a8d3a0973eafb9dd8d
|
|
|
|
OpenBSD-Commit-ID: f3cb4e54bff15c593602d95cc43e32ee1a4bac42
|
|
OpenBSD-Commit-ID: 5df340c5965e822c9da21e19579d08dea3cbe429
|
|
read_environment_file recently gained an extra argument Some platform
specific code also calls it so add the argument to those too. Fixes
build on Solaris and AIX.
|
|
pattern-list of whitelisted environment variable names in addition to yes|no.
bz#1800, feedback and ok markus@
OpenBSD-Commit-ID: 77dc2b468e0bf04b53f333434ba257008a1fdf24
|
|
administrator to explicitly specify environment variables set in sessions
started by sshd. These override the default environment and any variables set
by user configuration (PermitUserEnvironment, etc), but not the SSH_*
variables set by sshd itself.
ok markus@
OpenBSD-Commit-ID: b6a96c0001ccd7dd211df6cae9e961c20fd718c0
|
|
read from ~/.ssh/environment (if enabled) do not override SSH_* variables set
by the server.
OpenBSD-Commit-ID: 59f9d4c213cdcef2ef21f4b4ae006594dcf2aa7a
|
|
static limits noted by gerhard@; ok dtucker@, djm@
OpenBSD-Commit-ID: 6d702eabef0fa12e5a1d75c334a8c8b325298b5c
|
|
OpenBSD-Commit-ID: 8650883018d7aa893173d703379e4456a222c672
|
|
addresses may be listened on when the client requests remote forwarding (ssh
-R).
This is the converse of the existing PermitOpen directive and this
includes some refactoring to share much of its implementation.
feedback and ok markus@
OpenBSD-Commit-ID: 15a931238c61a3f2ac74ea18a98c933e358e277f
|
|
username is available currently. In the client this is via %i, in the server
%U (since %i was already used in the client in some places for this, but used
for something different in the server); bz#2870, ok dtucker@
OpenBSD-Commit-ID: c7e912b0213713316cb55db194b3a6415b3d4b95
|
|
remove the legacy one.
Includes a fairly big refactor of auth2-pubkey.c to retain less state
between key file lines.
feedback and ok markus@
OpenBSD-Commit-ID: dece6cae0f47751b9892080eb13d6625599573df
|
|
The code required to support it is quite invasive to the mainline
code that is synced with upstream and is an ongoing maintenance burden.
Both the hardware and software are literal museum pieces these days and
we could not find anyone still running OpenSSH on one.
|
|
|
|
|
|
Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
|
|
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
|
|
Move several subprocess-related functions from various
locations to misc.c. Extend subprocess() to offer a little more control over
stdio disposition.
feedback & ok dtucker@
Upstream-ID: 3573dd7109d13ef9bd3bed93a3deb170fbfce049
|
|
bz#2408; ok dtucker@
|
|
refactor authentication logging
optionally record successful auth methods and public credentials
used in a file accessible to user sessions
feedback and ok markus@
Upstream-ID: 090b93036967015717b9a54fd0467875ae9d32fb
|
|
no need to call log_init to reinitialise logged PID in
child sessions, since we haven't called openlog() in log_init() since 1999;
ok markus@
Upstream-ID: 0906e4002af5d83d3d544df75e1187c932a3cf2e
|
|
Switch to recallocarray() for a few operations. Both
growth and shrinkage are handled safely, and there also is no need for
preallocation dances. Future changes in this area will be less error prone.
Review and one bug found by markus
Upstream-ID: 822d664d6a5a1d10eccb23acdd53578a679d5065
|
|
clear session keys from memory; ok djm@
Upstream-ID: ecd178819868975affd5fd6637458b7c712b6a0f
|
|
Add a sshd_config DisableForwaring option that disables
X11, agent, TCP, tunnel and Unix domain socket forwarding, as well as
anything else we might implement in the future.
This, like the 'restrict' authorized_keys flag, is intended to be a
simple and future-proof way of restricting an account. Suggested as
a complement to 'restrict' by Jann Horn; ok markus@
Upstream-ID: 203803f66e533a474086b38a59ceb4cf2410fcf7
|
|
fix previous, a condition was modified incorrectly; ok
markus@ deraadt@
Upstream-ID: c443e339768e7ed396dff3bb55f693e7d3641453
|
|
remove UseLogin option and support for having /bin/login
manage login sessions; ok deraadt markus dtucker
Upstream-ID: bea7213fbf158efab7e602d9d844fba4837d2712
|
|
remove ssh1 server code; ok djm@
Upstream-ID: c24c0c32c49b91740d5a94ae914fb1898ea5f534
|
|
Apply the same get_remote_name_or_ip -> session_get_remote_name_or_ip
change as commit 95767262 to the code inside #ifdef LOGIN_NEEDS_UTMPX.
Fixes build on AIX.
|
|
If PAM is configured to read user-specified environment variables
and UseLogin=yes in sshd_config, then a hostile local user may
attack /bin/login via LD_PRELOAD or similar environment variables
set via PAM.
CVE-2015-8325, found by Shayan Sadigh, via Colin Watson
|
|
sanitise characters destined for xauth reported by
github.com/tintinweb feedback and ok deraadt and markus
Upstream-ID: 18ad8d0d74cbd2ea3306a16595a306ee356aa261
|
|
refactor canohost.c: move functions that cache results closer
to the places that use them (authn and session code). After this, no state is
cached in canohost.c
feedback and ok markus@
Upstream-ID: 5f2e4df88d4803fc8ec59ec53629105e23ce625e
|
|
add a "Close session" log entry (at loglevel=verbose) to
correspond to the existing "Starting session" one. Also include the session
id number to make multiplexed sessions more apparent.
feedback and ok dtucker@
Upstream-ID: e72d2ac080e02774376325136e532cb24c2e617c
|
|
skip "Could not chdir to home directory" message when
chrooted
patch from Christian Hesse in bz#2485 ok dtucker@
Upstream-ID: 86783c1953da426dff5b03b03ce46e699d9e5431
|
|
rename xrealloc() to xreallocarray() since it follows
that form. ok djm
|