| Age | Commit message (Collapse) | Author |
|---|
|
refactor channels.c
Move static state to a "struct ssh_channels" that is allocated at
runtime and tracked as a member of struct ssh.
Explicitly pass "struct ssh" to all channels functions.
Replace use of the legacy packet APIs in channels.c.
Rework sshd_config PermitOpen handling: previously the configuration
parser would call directly into the channels layer. After the refactor
this is not possible, as the channels structures are allocated at
connection time and aren't available when the configuration is parsed.
The server config parser now tracks PermitOpen itself and explicitly
configures the channels code later.
ok markus@
Upstream-ID: 11828f161656b965cc306576422613614bea2d8f
|
|
Move several subprocess-related functions from various
locations to misc.c. Extend subprocess() to offer a little more control over
stdio disposition.
feedback & ok dtucker@
Upstream-ID: 3573dd7109d13ef9bd3bed93a3deb170fbfce049
|
|
remove ssh1 server code; ok djm@
Upstream-ID: c24c0c32c49b91740d5a94ae914fb1898ea5f534
|
|
refactor canohost.c: move functions that cache results closer
to the places that use them (authn and session code). After this, no state is
cached in canohost.c
feedback and ok markus@
Upstream-ID: 5f2e4df88d4803fc8ec59ec53629105e23ce625e
|
|
[session.c session.h]
Add logging of session starts in a useful format; ok markus@ feedback and
ok dtucker@
|
|
[monitor.c monitor_wrap.c session.h servconf.c servconf.h session.c]
[sshd_config sshd_config.5]
Make the maximum number of sessions run-time controllable via
a sshd_config MaxSessions knob. This is useful for disabling
login/shell/subsystem access while leaving port-forwarding working
(MaxSessions 0), disabling connection multiplexing (MaxSessions 1) or
simply increasing the number of allows multiplexed sessions.
Because some bozos are sure to configure MaxSessions in excess of the
number of available file descriptors in sshd (which, at peak, might be
as many as 9*MaxSessions), audit sshd to ensure that it doesn't leak fds
on error paths, and make it fail gracefully on out-of-fd conditions -
sending channel errors instead of than exiting with fatal().
bz#1090; MaxSessions config bits and manpage from junyer AT gmail.com
ok markus@
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c]
[auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c]
[auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c]
[monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c]
[session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c]
[ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c]
[uidswap.h]
move #include <pwd.h> out of includes.h; ok markus@
|
|
[atomicio.h auth-options.h auth.h auth2-gss.c authfd.h authfile.h]
[bufaux.h buffer.h canohost.h channels.h cipher.h clientloop.h]
[compat.h compress.h crc32.c crc32.h deattack.h dh.h dispatch.h]
[dns.c dns.h getput.h groupaccess.h gss-genr.c gss-serv-krb5.c]
[gss-serv.c hostfile.h includes.h kex.h key.h log.h mac.h match.h]
[misc.h monitor.h monitor_fdpass.h monitor_mm.h monitor_wrap.h msg.h]
[myproposal.h packet.h pathnames.h progressmeter.h readconf.h rsa.h]
[scard.h servconf.h serverloop.h session.h sftp-common.h sftp.h]
[ssh-gss.h ssh.h ssh1.h ssh2.h sshconnect.h sshlogin.h sshpty.h]
[ttymodes.h uidswap.h uuencode.h xmalloc.h]
standardise spacing in $OpenBSD$ tags; requested by deraadt@
|
|
[session.h]
annoying spacing fixes getting in the way of real diffs
|
|
- djm@cvs.openbsd.org 2005/07/17 06:49:04
[channels.c channels.h session.c session.h]
Fix a number of X11 forwarding channel leaks:
1. Refuse multiple X11 forwarding requests on the same session
2. Clean up all listeners after a single_connection X11 forward, not just
the one that made the single connection
3. Destroy X11 listeners when the session owning them goes away
testing and ok dtucker@
|
|
[auth-rsa.c auth.c auth1.c auth2-chall.c auth2-gss.c authfd.c authfile.c]
[bufaux.c canohost.c channels.c cipher.c clientloop.c dns.c gss-serv.c]
[kex.c kex.h key.c mac.c match.c misc.c packet.c packet.h scp.c]
[servconf.c session.c session.h sftp-client.c sftp-server.c sftp.c]
[ssh-keyscan.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
make this -Wsign-compare clean; ok avsm@ markus@
NB. auth1.c changes not committed yet (conflicts with uncommitted sync)
NB2. more work may be needed to make portable Wsign-compare clean
|
|
[monitor.c monitor_wrap.c session.c session.h sshd.c sshlogin.c]
Move "Last logged in at.." message generation to the monitor, right
before recording the new login. Fixes missing lastlog message when
/var/log/lastlog is not world-readable and incorrect datestamp when
multiple sessions are used (bz #463); much assistance & ok markus@
|
|
[readconf.c readconf.h servconf.c servconf.h session.c session.h ssh.c
ssh_config.5 sshd_config.5]
bz #815: implement ability to pass specified environment variables from
the client to the server; ok markus@
|
|
[Makefile.in auth1.c auth2.c auth.c auth.h auth-krb5.c canohost.c
cleanup.c clientloop.c fatal.c gss-serv.c log.c log.h monitor.c monitor.h
monitor_wrap.c monitor_wrap.h packet.c serverloop.c session.c session.h
ssh-agent.c sshd.c]
replace fatal_cleanup() and linked list of fatal callbacks with static
cleanup_exit() function. re-refine cleanup_exit() where appropriate,
allocate sshd's authctxt eary to allow simpler cleanup in sshd.
tested by many, ok deraadt@
|
|
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
|
|
[auth-bsdauth.c auth-skey.c auth2-chall.c clientloop.c key.c
monitor_wrap.c monitor_wrap.h scard.h session.h sftp-glob.c ssh.c
sshconnect2.c sshd.c]
minor KNF
|
|
[channels.c channels.h session.c session.h]
display, screen, row, col, xpixel, ypixel are u_int; markus ok
- (bal) Also fixed IPADDR_IN_DISPLAY case where display, screen, row, col,
xpixel are u_int.
|
|
[session.c session.h]
retrieve last login time before the pty is allocated, store per session
|
|
[auth-options.c auth.h session.c session.h sshd.c]
clean up prototypes
|
|
[auth-bsdauth.c auth-options.c auth-rh-rsa.c auth-rsa.c auth-skey.c auth.h
auth1.c auth2-chall.c auth2.c kex.c kex.h kexdh.c kexgex.c servconf.c
session.h servconf.h serverloop.c session.c sshd.c]
integrate privilege separated openssh; its turned off by default for now.
work done by me and markus@
applied, but outside of ensure that smaller code bits migrated with
their owners.. no work was tried to 'fix' it to work. =) Later project!
|
|
revert
|
|
PAM, Cygwin and OSF SIA will not work for sure
|
|
[auth1.c serverloop.c session.c session.h]
don't use channel_input_channel_request and callback
use new server_input_channel_req() instead:
server_input_channel_req does generic request parsing on server side
session_input_channel_req handles just session specific things now
ok djm@
|
|
- markus@cvs.openbsd.org 2001/10/10 22:18:47
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c session.h]
try to keep channels open until an exit-status message is sent.
don't kill the login shells if the shells stdin/out/err is closed.
this should now work:
ssh -2n localhost 'exec > /dev/null 2>&1; sleep 10; exit 5'; echo ?
|
|
[channels.c channels.h serverloop.c session.c session.h]
simplify session close: no more delayed session_close, no more blocking wait() calls.
|
|
[serverloop.c session.c session.h]
wait until !session_have_children(); bugreport from
Lutz.Jaenicke@aet.TU-Cottbus.DE
|
|
[serverloop.c serverloop.h session.c session.h]
quick hack to make ssh2 work again.
|
|
[authfd.h authfile.h auth.h auth-options.h bufaux.h buffer.h
canohost.h channels.h cipher.h clientloop.h compat.h compress.h
crc32.h deattack.h dh.h dispatch.h groupaccess.c groupaccess.h
hostfile.h kex.h key.h log.c log.h mac.h misc.c misc.h mpaux.h
packet.h radix.h readconf.h readpass.h rsa.h servconf.h serverloop.h
session.h sftp-common.c sftp-common.h sftp-glob.h sftp-int.h
sshconnect.h ssh-dss.h sshlogin.h sshpty.h ssh-rsa.h sshtty.h
tildexpand.h uidswap.h uuencode.h xmalloc.h]
remove comments from .h, since they are cut&paste from the .c files
and out of sync
|
|
[servconf.h serverloop.h session.h sftp-client.h sftp-common.h
sftp-glob.h sftp-int.h sshconnect.h ssh-dss.h sshlogin.h sshpty.h
ssh-rsa.h tildexpand.h uidswap.h uuencode.h xmalloc.h]
prototype pedant. not very creative...
- () -> (void)
- no variable names
|
|
[channels.c channels.h cipher.c clientloop.c compat.c compat.h
hostfile.c kex.c kex.h key.c key.h nchan.c packet.c serverloop.c
session.c session.h sftp-server.c ssh-add.c ssh-agent.c uuencode.h]
update copyright for 2001
|
|
[auth1.c auth2.c session.c session.h]
merge common ssh v1/2 code
|
|
[atomicio.h canohost.h clientloop.h deattack.h dh.h dispatch.h
groupaccess.c groupaccess.h hmac.h hostfile.h includes.h kex.h
key.h log.h login.h match.h misc.h myproposal.h nchan.ms pathnames.h
radix.h readpass.h rijndael.h serverloop.h session.h sftp.h ssh-add.1
ssh-dss.h ssh-keygen.1 ssh-keyscan.1 ssh-rsa.h ssh1.h ssh_config
sshconnect.h sshd_config tildexpand.h uidswap.h uuencode.h]
$OpenBSD$
|
|
that I was able to get all the portable bits in the right location. As for
the SKEY comment there is an email out to Markus as to how it should be
resolved. Until then I just #ifdef SKEY/#endif out the whole block.
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/18 16:20:21
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1 ssh.h
sshd.8 sshd.c]
log() is at pri=LOG_INFO, since LOG_NOTICE goes to /dev/console on many
systems
- markus@cvs.openbsd.org 2001/01/18 16:59:59
[auth-passwd.c auth.c auth.h auth1.c auth2.c serverloop.c session.c
session.h sshconnect1.c]
1) removes fake skey from sshd, since this will be much
harder with /usr/libexec/auth/login_XXX
2) share/unify code used in ssh-1 and ssh-2 authentication (server side)
3) make addition of BSD_AUTH and other challenge reponse methods
easier.
- markus@cvs.openbsd.org 2001/01/18 17:12:43
[auth-chall.c auth2-chall.c]
rename *-skey.c *-chall.c since the files are not skey specific
|
|
|
|
|
|
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
|
|
- [auth.c auth.h servconf.c servconf.h serverloop.c session.c]
[session.h ssh.h sshd.c README.openssh2]
ssh2 server side, see README.openssh2; enable with 'sshd -2'
- [channels.c]
no adjust after close
- [sshd.c compat.c ]
interop w/ latest ssh.com windows client.
|
|
- [auth.c session.c sshd.c auth.h]
split sshd.c -> auth.c session.c sshd.c plus cleanup and goto-removal
- [bufaux.c bufaux.h]
support ssh2 bignums
- [channels.c channels.h clientloop.c sshd.c nchan.c nchan.h packet.c]
[readconf.c ssh.c ssh.h serverloop.c]
replace big switch() with function tables (prepare for ssh2)
- [ssh2.h]
ssh2 message type codes
- [sshd.8]
reorder Xr to avoid cutting
- [serverloop.c]
close(fdin) if fdin != fdout, shutdown otherwise, ok theo@
- [channels.c]
missing close
allow bigger packets
- [cipher.c cipher.h]
support ssh2 ciphers
- [compress.c]
cleanup, less code
- [dispatch.c dispatch.h]
function tables for different message types
- [log-server.c]
do not log() if debuggin to stderr
rename a cpp symbol, to avoid param.h collision
- [mpaux.c]
KNF
- [nchan.c]
sync w/ channels.c
|
