| Age | Commit message (Collapse) | Author |
|---|
|
add error message on ftruncate failure; bz#2176
Upstream-ID: cbcc606e0b748520c74a210d8f3cc9718d3148cf
|
|
fix a memory leak in an error path ok markus@ dtucker@
Upstream-ID: bc1da0f205494944918533d8780fde65dff6c598
|
|
rename xrealloc() to xreallocarray() since it follows
that form. ok djm
|
|
Reduce use of <sys/param.h> and transition to <limits.h>
throughout. ok djm markus
|
|
update sftp client and server to new buffer API. pretty
much just mechanical changes; with & ok markus
|
|
[sftp-client.c sftp-client.h sftp.c]
Implement sftp upload resume support.
OK from djm@, with input from guenther@, mlarkin@ and
okan@
|
|
[auth2-chall.c authfd.c authfile.c bufaux.c bufec.c canohost.c]
[channels.c cipher-chachapoly.c clientloop.c configure.ac hostfile.c]
[kexc25519.c krl.c monitor.c sandbox-systrace.c session.c]
[sftp-client.c ssh-keygen.c ssh.c sshconnect2.c sshd.c sshlogin.c]
[openbsd-compat/explicit_bzero.c openbsd-compat/openbsd-compat.h]
replace most bzero with explicit_bzero, except a few that cna be memset
ok djm dtucker
|
|
[sftp-client.c]
signed/unsigned comparison warning fix; from portable (Id sync only)
|
|
|
|
[sftp-client.c]
needless and incorrect cast to size_t can break resumption of
large download; patch from tobias@
|
|
[sftp-client.c]
fix memory leak in error path in do_readdir(); pointed out by
Loganaden Velvindron @ AfriNIC in bz#2163
|
|
[sftp-client.c]
bz#2171: don't leak local_fd on error; from Loganaden Velvindron @
AfriNIC
|
|
[bufaux.c bufbn.c buffer.c sftp-client.c sftp-common.c sftp-glob.c]
[uidswap.c] Include stdlib.h for free() as per the man page.
|
|
[auth-options.c auth2-chall.c authfd.c channels.c cipher-3des1.c]
[clientloop.c gss-genr.c monitor_mm.c packet.c schnorr.c umac.c]
[sftp-client.c sftp-glob.c]
use calloc for all structure allocations; from markus@
|
|
[PROTOCOL sftp-client.c sftp-client.h sftp-server.c sftp.1 sftp.c]
fsync@openssh.com protocol extension for sftp-server
client support to allow calling fsync() faster successful transfer
patch mostly by imorgan AT nas.nasa.gov; bz#1798
"fine" markus@ "grumble OK" deraadt@ "doesn't sound bad to me" millert@
|
|
[sftp-client.c]
missed one arg reorder
|
|
[sftp-client.c]
rename flag arguments to be more clear and consistent.
reorder some internal function arguments to make adding additional flags
easier.
no functional change
|
|
[sftp-client.c]
fix swapped pflag and printflag in sftp upload_dir; from Iain Morgan
|
|
[sftp-client.c]
two problems found by a to-be-committed regress test: 1) msg_id was not
being initialised so was starting at a random value from the heap
(harmless, but confusing). 2) some error conditions were not being
propagated back to the caller
|
|
[sftp-client.c sftp-client.h sftp.c]
add a "-l" flag for the rename command to force it to use the silly
standard SSH_FXP_RENAME command instead of the POSIX-rename- like
posix-rename@openssh.com extension.
intended for use in regress tests, so no documentation.
|
|
Solaris and UnixWare. Feedback and OK djm@
|
|
[sftp-client.c sftp-client.h sftp.1 sftp.c]
sftp support for resuming partial downloads; patch mostly by Loganaden
Velvindron/AfriNIC with some tweaks by me; feedback and ok dtucker@
|
|
[sftp-client.c]
Update progressmeter when data is acked, not when it's sent. bz#2108, from
Debian via Colin Watson, ok djm@
|
|
[scp.c sftp-client.c]
Replace S_IWRITE, which isn't standardized, with S_IWUSR, which is. Patch
from Nathan Osman via bz#2113. ok deraadt.
(note: corrected bug number from 2085)
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
[ssh-pkcs11-helper.c sftp-client.c]
fix a couple of "assigned but not used" warnings. ok markus@
|
|
[sftp-client.c]
fix leak in do_lsreaddir(); ok djm
|
|
[sftp-client.c]
fix leaks in do_hardlink() and do_readlink(); bz#1921
from Loganaden Velvindron
|
|
[sftp-server.c sftp.1 sftp-client.h sftp.c PROTOCOL sftp-client.c]
add a protocol extension to support a hard link operation. It is
available through the "ln" command in the client. The old "ln"
behaviour of creating a symlink is available using its "-s" option
or through the preexisting "symlink" command; based on a patch from
miklos AT szeredi.hu in bz#1555; ok markus@
|
|
[atomicio.c atomicio.h misc.c misc.h scp.c sftp-client.c]
[sftp-client.h sftp.1 sftp.c]
add an option per-read/write callback to atomicio
factor out bandwidth limiting code from scp(1) into a generic bandwidth
limiter that can be attached using the atomicio callback mechanism
add a bandwidth limit option to sftp(1) using the above
"very nice" markus@
|
|
[sftp-client.c]
bz#1797: fix swapped args in upload_dir_internal(), breaking recursive
upload depth checks and causing verbose printing of transfers to always
be turned on; patch from imorgan AT nas.nasa.gov
|
|
[sftp-client.c]
fix memory leak in do_realpath() error path; bz#1771, patch from
anicka AT suse.cz
|
|
[sftp-client.c]
d_type isn't portable so use lstat to get dirent modes. Suggested by and
"looks sane" deraadt@
|
|
dirent d_type and DTTOIF as we've switched OpenBSD to the more portable
lstat.
|
|
stat(), needed on at least cygwin.
|
|
least dragonflybsd.
|
|
[sftp-client.h sftp.1 sftp-client.c sftp.c]
recursive transfer support for get/put and on the commandline
work mostly by carlosvsilvapt@gmail.com for the Google Summer of Code
with some tweaks by me; "go for it" deraadt@
|
|
[sftp-client.c]
make the "get_handle: ..." error messages vaguely useful by allowing
callers to specify their own error message strings.
|
|
[monitor_wrap.c monitor_mm.c ssh-keygen.c auth2.c gss-genr.c sftp-client.c]
alphabetize includes; reduces diff vs portable and style(9).
ok stevesk djm
(Id sync only; these were already in order in -portable)
|
|
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c]
[sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on
some platforms (HP nonstop) it is a distinct errno;
bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
|
|
[sftp-client.c sftp-server.c]
allow the sftp chmod(2)-equivalent operation to set set[ug]id/sticky
bits. Note that this only affects explicit setting of modes (e.g. via
sftp(1)'s chmod command) and not file transfers. (bz#1310)
ok deraadt@ at c2k8
|
|
[sftp-client.c]
print extension revisions for extensions that we understand
|
|
[sftp.c sftp-client.c sftp-client.h]
Have the sftp client store the statvfs replies in wire format,
which prevents problems when the server's native sizes exceed the
client's.
Also extends the sizes of the remaining 32bit wire format to 64bit,
they're specified as unsigned long in the standard.
|
|
openbsd-compat/Makefile.in openbsd-compat/openbsd-compat.h
openbsd-compat/bsd-statvfs.{c,h}] Add a null implementation of statvfs and
fstatvfs and remove #defines around statvfs code. ok djm@
|
|
[sftp-server.c sftp-client.c]
statvfs member fsid needs to be wider, increase it to 64 bits and
crank extension revision number to 2; prodded and ok dtucker@
|
|
not enable statvfs extensions on platforms that do not have statvfs. ok djm@
|
|
[sftp-client.c sftp-client.h sftp-server.c sftp.1 sftp.c sftp.h]
introduce sftp extension methods statvfs@openssh.com and
fstatvfs@openssh.com that implement statvfs(2)-like operations,
based on a patch from miklos AT szeredi.hu (bz#1399)
also add a "df" command to the sftp client that uses the
statvfs@openssh.com to produce a df(1)-like display of filesystem
space and inode utilisation
ok markus@
|
|
[sftp-client.c]
prefer POSIX-style file renaming over filexfer rename behaviour if the
server supports the posix-rename@openssh.com extension.
Note that the old (filexfer) behaviour would refuse to clobber an
existing file. Users who depended on this should adjust their sftp(1)
usage.
ok deraadt@ markus@
|
|
[sftp-client.c]
when a remote write error occurs during an upload, ensure that ACKs for
all issued requests are properly drained. patch from t8m AT centrum.cz
|
|
[sftp-client.c]
fix remote handle leak in do_download() local file open error path;
report and fix from sworley AT chkno.net
|
