| Age | Commit message (Collapse) | Author |
|---|
|
backported to 4.7p1:
- 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9):
+ Added chroot(2) support for sshd(8), controlled by a new option
"ChrootDirectory" (closes: #139047, LP: #24777).
+ Linked sftp-server(8) into sshd(8). The internal sftp server is used
when the command "internal-sftp" is specified in a Subsystem or
ForceCommand declaration. When used with ChrootDirectory, the
internal sftp server requires no special configuration of files
inside the chroot environment.
+ Added a protocol extension method "posix-rename@openssh.com" for
sftp-server(8) to perform POSIX atomic rename() operations; sftp(1)
prefers this if available (closes: #308561).
+ Removed the fixed limit of 100 file handles in sftp-server(8).
+ ssh(8) will now skip generation of SSH protocol 1 ephemeral server
keys when in inetd mode and protocol 2 connections are negotiated.
This speeds up protocol 2 connections to inetd-mode servers that
also allow Protocol 1.
+ Accept the PermitRootLogin directive in a sshd_config(5) Match
block. Allows for, e.g. permitting root only from the local network.
+ Reworked sftp(1) argument splitting and escaping to be more
internally consistent (i.e. between sftp commands) and more
consistent with sh(1). Please note that this will change the
interpretation of some quoted strings, especially those with
embedded backslash escape sequences.
+ Support "Banner=none" in sshd_config(5) to disable sending of a
pre-login banner (e.g. in a Match block).
+ ssh(1) ProxyCommands are now executed with $SHELL rather than
/bin/sh.
+ ssh(1)'s ConnectTimeout option is now applied to both the TCP
connection and the SSH banner exchange (previously it just covered
the TCP connection). This allows callers of ssh(1) to better detect
and deal with stuck servers that accept a TCP connection but don't
progress the protocol, and also makes ConnectTimeout useful for
connections via a ProxyCommand.
+ scp(1) incorrectly reported "stalled" on slow copies (closes:
#140828).
+ scp(1) date underflow for timestamps before epoch.
+ ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS,
instead of the current standard RRSIG.
+ Correctly drain ACKs when a sftp(1) upload write fails midway,
avoids a fatal() exit from what should be a recoverable condition.
+ Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF
hostname") to not include any IP address in the data to be hashed.
+ Make ssh(1) skip listening on the IPv6 wildcard address when a
binding address of 0.0.0.0 is used against an old SSH server that
does not support the RFC4254 syntax for wildcard bind addresses.
+ Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is
already done for X11/TCP forwarding sockets (closes: #439661).
+ Fix FD leak that could hang a ssh(1) connection multiplexing master.
+ Make ssh(1) -q option documentation consistent with reality.
+ Fixed sshd(8) PAM support not calling pam_session_close(), or
failing to call it with root privileges (closes: #372680).
+ Fix activation of OpenSSL engine support when requested in configure
(LP: #119295).
- 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1):
+ Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1)
and ssh-keygen(1). Visual fingerprint display is controlled by a new
ssh_config(5) option "VisualHostKey". The intent is to render SSH
host keys in a visual form that is amenable to easy recall and
rejection of changed host keys.
+ sshd_config(5) now supports CIDR address/masklen matching in "Match
address" blocks, with a fallback to classic wildcard matching.
+ sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys
from="..." restrictions, also with a fallback to classic wildcard
matching.
+ Added an extended test mode (-T) to sshd(8) to request that it write
its effective configuration to stdout and exit. Extended test mode
also supports the specification of connection parameters (username,
source address and hostname) to test the application of
sshd_config(5) Match rules.
+ ssh(1) now prints the number of bytes transferred and the overall
connection throughput for SSH protocol 2 sessions when in verbose
mode (previously these statistics were displayed for protocol 1
connections only).
+ sftp-server(8) now supports extension methods statvfs@openssh.com
and fstatvfs@openssh.com that implement statvfs(2)-like operations.
+ sftp(1) now has a "df" command to the sftp client that uses the
statvfs@openssh.com to produce a df(1)-like display of filesystem
space and inode utilisation (requires statvfs@openssh.com support on
the server).
+ Added a MaxSessions option to sshd_config(5) to allow control of the
number of multiplexed sessions supported over a single TCP
connection. This allows increasing the number of allowed sessions
above the previous default of 10, disabling connection multiplexing
(MaxSessions=1) or disallowing login/shell/subsystem sessions
entirely (MaxSessions=0).
+ Added a no-more-sessions@openssh.com global request extension that
is sent from ssh(1) to sshd(8) when the client knows that it will
never request another session (i.e. when session multiplexing is
disabled). This allows a server to disallow further session requests
and terminate the session in cases where the client has been
hijacked.
+ ssh-keygen(1) now supports the use of the -l option in combination
with -F to search for a host in ~/.ssh/known_hosts and display its
fingerprint.
+ ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of
"rsa1".
+ Added an AllowAgentForwarding option to sshd_config(8) to control
whether authentication agent forwarding is permitted. Note that this
is a loose control, as a client may install their own unofficial
forwarder.
+ ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when
receiving network data, resulting in a ~10% speedup.
+ ssh(1) and sshd(8) will now try additional addresses when connecting
to a port forward destination whose DNS name resolves to more than
one address. The previous behaviour was to try the only first
address and give up if that failed.
+ ssh(1) and sshd(8) now support signalling that channels are
half-closed for writing, through a channel protocol extension
notification "eow@openssh.com". This allows propagation of closed
file descriptors, so that commands such as "ssh -2 localhost od
/bin/ls | true" do not send unnecessary data over the wire.
+ sshd(8): increased the default size of ssh protocol 1 ephemeral keys
from 768 to 1024 bits.
+ When ssh(1) has been requested to fork after authentication ("ssh
-f") with ExitOnForwardFailure enabled, delay the fork until after
replies for any -R forwards have been seen. Allows for robust
detection of -R forward failure when using -f.
+ "Match group" blocks in sshd_config(5) now support negation of
groups. E.g. "Match group staff,!guests".
+ sftp(1) and sftp-server(8) now allow chmod-like operations to set
set[ug]id/sticky bits.
+ The MaxAuthTries option is now permitted in sshd_config(5) match
blocks.
+ Multiplexed ssh(1) sessions now support a subset of the ~ escapes
that are available to a primary connection.
+ ssh(1) connection multiplexing will now fall back to creating a new
connection in most error cases (closes: #352830).
+ Make ssh(1) deal more gracefully with channel requests that fail.
Previously it would optimistically assume that requests would always
succeed, which could cause hangs if they did not (e.g. when the
server runs out of file descriptors).
+ ssh(1) now reports multiplexing errors via the multiplex slave's
stderr where possible (subject to LogLevel in the mux master).
+ Prevent sshd(8) from erroneously applying public key restrictions
leaned from ~/.ssh/authorized_keys to other authentication methods
when public key authentication subsequently fails (LP: #161047).
+ Fixed an UMAC alignment problem that manifested on Itanium
platforms.
|
|
[sftp-server.8]
no need for .Pp before or after .Sh;
|
|
[sftp-server.8]
mention requirement for /dev/log inside chroot when using sftp-server
with ChrootDirectory
|
|
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if
creation of an untrusted cookie fails; found and fixed by Jan Pechanec
(closes: #444738).
- sshd(8) in new installations defaults to SSH Protocol 2 only. Existing
installations are unchanged.
- The SSH channel window size has been increased, and both ssh(1)
sshd(8) now send window updates more aggressively. These improves
performance on high-BDP (Bandwidth Delay Product) networks.
- ssh(1) and sshd(8) now preserve MAC contexts between packets, which
saves 2 hash calls per packet and results in 12-16% speedup for
arcfour256/hmac-md5.
- A new MAC algorithm has been added, UMAC-64 (RFC4418) as
"umac-64@openssh.com". UMAC-64 has been measured to be approximately
20% faster than HMAC-MD5.
- Failure to establish a ssh(1) TunnelForward is now treated as a fatal
error when the ExitOnForwardFailure option is set.
- ssh(1) returns a sensible exit status if the control master goes away
without passing the full exit status.
- When using a ProxyCommand in ssh(1), set the outgoing hostname with
gethostname(2), allowing hostbased authentication to work.
- Make scp(1) skip FIFOs rather than hanging (closes: #246774).
- Encode non-printing characters in scp(1) filenames. These could cause
copies to be aborted with a "protocol error".
- Handle SIGINT in sshd(8) privilege separation child process to ensure
that wtmp and lastlog records are correctly updated.
- Report GSSAPI mechanism in errors, for libraries that support multiple
mechanisms.
- Improve documentation for ssh-add(1)'s -d option.
- Rearrange and tidy GSSAPI code, removing server-only code being linked
into the client.
- Delay execution of ssh(1)'s LocalCommand until after all forwardings
have been established.
- In scp(1), do not truncate non-regular files.
- Improve exit message from ControlMaster clients.
- Prevent sftp-server(8) from reading until it runs out of buffer space,
whereupon it would exit with a fatal error (closes: #365541).
- pam_end() was not being called if authentication failed
(closes: #405041).
- Manual page datestamps updated (closes: #433181).
|
|
|
|
sshd_config(5).
|
|
[scp.1 ssh_config.5 sftp-server.8 ssh-agent.1 sshd_config.5 sftp.1
ssh-keygen.1 ssh-keyscan.1 ssh-add.1 sshd.8 ssh.1 ssh-keysign.8]
convert to new .Dd format;
(We will need to teach mdoc2man.awk to understand this too.)
|
|
|
|
[sftp-server.8 sftp-server.c]
add commandline options to enable logging of transactions; ok markus@
|
|
[scp.1 scp.c sftp-server.8 sftp.1 sftp.c ssh.1 sshd.8]
scp and sftp: add options list and sort options. options list requested
by deraadt@
sshd: use same format as ssh
ssh: remove wrong option from list
sftp-server: Subsystem is documented in ssh_config(5), not sshd(8)
ok deraadt@ markus@
|
|
[scp.1 sftp-server.8 ssh.1 ssh-add.1 ssh-agent.1 ssh_config.5]
[sshd.8 sshd_config.5 ssh-keygen.1 ssh-keyscan.1 ssh-keysign.8]
- section reorder
- COMPATIBILITY merge
- macro cleanup
- kill whitespace at EOL
- new sentence, new line
ssh pages ok markus@
|
|
[sftp.1 sftp-server.8 ssh-keygen.1]
ok, tmac is now fixed
|
|
[sftp.1 sftp-server.8 ssh-keygen.1]
join .%A entries; most by bk@rt.fm
|
|
[sftp-server.8 sftp.1 ssh.1 sshd.8]
xref draft-ietf-secsh-*
|
|
[atomicio.c atomicio.h auth-chall.c auth.c auth2-chall.c crc32.h
scp.c serverloop.c session.c sftp-server.8 sftp.1 ssh-add.1 ssh-add.c
ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh.1 sshd.8]
make copyright lines the same format
|
|
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
|
|
- markus@cvs.openbsd.org 2000/10/14 04:01:15
[cipher.c]
debug3
- markus@cvs.openbsd.org 2000/10/14 04:07:23
[scp.c]
remove spaces from arguments; from djm@mindrot.org
- markus@cvs.openbsd.org 2000/10/14 06:09:46
[ssh.1]
Cipher is for SSH-1 only
- markus@cvs.openbsd.org 2000/10/14 06:12:09
[servconf.c servconf.h serverloop.c session.c sshd.8]
AllowTcpForwarding; from naddy@
- markus@cvs.openbsd.org 2000/10/14 06:16:56
[auth2.c compat.c compat.h sshconnect2.c version.h]
OpenSSH_2.3; note that is is not complete, but the version number
needs to be changed for interoperability reasons
- markus@cvs.openbsd.org 2000/10/14 06:19:45
[auth-rsa.c]
do not send RSA challenge if key is not allowed by key-options; from
eivind@ThinkSec.com
- markus@cvs.openbsd.org 2000/10/15 08:14:01
[rijndael.c session.c]
typos; from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2000/10/15 08:18:31
[rijndael.c]
typo
- Copy manpages back over from OpenBSD - too tedious to wade through diffs
|
|
- markus@cvs.openbsd.org 2000/09/30 10:27:44
[log.c]
allow loglevel debug
- markus@cvs.openbsd.org 2000/10/03 11:59:57
[packet.c]
hmac->mac
- markus@cvs.openbsd.org 2000/10/03 12:03:03
[auth-krb4.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth1.c]
move fake-auth from auth1.c to individual auth methods, disables s/key in
debug-msg
- markus@cvs.openbsd.org 2000/10/03 12:16:48
ssh.c
do not resolve canonname, i have no idea why this was added oin ossh
- markus@cvs.openbsd.org 2000/10/09 15:30:44
ssh-keygen.1 ssh-keygen.c
-X now reads private ssh.com DSA keys, too.
- markus@cvs.openbsd.org 2000/10/09 15:32:34
auth-options.c
clear options on every call.
- markus@cvs.openbsd.org 2000/10/09 15:51:00
authfd.c authfd.h
interop with ssh-agent2, from <res@shore.net>
- markus@cvs.openbsd.org 2000/10/10 14:20:45
compat.c
use rexexp for version string matching
- provos@cvs.openbsd.org 2000/10/10 22:02:18
[kex.c kex.h myproposal.h ssh.h ssh2.h sshconnect2.c sshd.c dh.c dh.h]
First rough implementation of the diffie-hellman group exchange. The
client can ask the server for bigger groups to perform the diffie-hellman
in, thus increasing the attack complexity when using ciphers with longer
keys. University of Windsor provided network, T the company.
- markus@cvs.openbsd.org 2000/10/11 13:59:52
[auth-rsa.c auth2.c]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:00:27
[auth-options.h]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:03:27
[scp.1 scp.c]
support 'scp -o' with help from mouring@pconline.com
- markus@cvs.openbsd.org 2000/10/11 14:11:35
[dh.c]
Wall
- markus@cvs.openbsd.org 2000/10/11 14:14:40
[auth.h auth2.c readconf.c readconf.h readpass.c servconf.c servconf.h]
[ssh.h sshconnect2.c sshd_config auth2-skey.c cli.c cli.h]
add support for s/key (kbd-interactive) to ssh2, based on work by
mkiernan@avantgo.com and me
- markus@cvs.openbsd.org 2000/10/11 14:27:24
[auth.c auth1.c auth2.c authfile.c cipher.c cipher.h kex.c kex.h]
[myproposal.h packet.c readconf.c session.c ssh.c ssh.h sshconnect1.c]
[sshconnect2.c sshd.c]
new cipher framework
- markus@cvs.openbsd.org 2000/10/11 14:45:21
[cipher.c]
remove DES
- markus@cvs.openbsd.org 2000/10/12 03:59:20
[cipher.c cipher.h sshconnect1.c sshconnect2.c sshd.c]
enable DES in SSH-1 clients only
- markus@cvs.openbsd.org 2000/10/12 08:21:13
[kex.h packet.c]
remove unused
- markus@cvs.openbsd.org 2000/10/13 12:34:46
[sshd.c]
Kludge for F-Secure Macintosh < 1.0.2; appro@fy.chalmers.se
- markus@cvs.openbsd.org 2000/10/13 12:59:15
[cipher.c cipher.h myproposal.h rijndael.c rijndael.h]
rijndael/aes support
- markus@cvs.openbsd.org 2000/10/13 13:10:54
[sshd.8]
more info about -V
- markus@cvs.openbsd.org 2000/10/13 13:12:02
[myproposal.h]
prefer no compression
|
|
|
|
- markus@cvs.openbsd.org 2000/09/05 02:59:57
[session.c]
print hostname (not hushlogin)
- markus@cvs.openbsd.org 2000/09/05 13:18:48
[authfile.c ssh-add.c]
enable ssh-add -d for DSA keys
- markus@cvs.openbsd.org 2000/09/05 13:20:49
[sftp-server.c]
cleanup
- markus@cvs.openbsd.org 2000/09/06 03:46:41
[authfile.h]
prototype
- deraadt@cvs.openbsd.org 2000/09/07 14:27:56
[ALL]
cleanup copyright notices on all files. I have attempted to be
accurate with the details. everything is now under Tatu's licence
(which I copied from his readme), and/or the core-sdi bsd-ish thing
for deattack, or various openbsd developers under a 2-term bsd
licence. We're not changing any rules, just being accurate.
- markus@cvs.openbsd.org 2000/09/07 14:40:30
[channels.c channels.h clientloop.c serverloop.c ssh.c]
cleanup window and packet sizes for ssh2 flow control; ok niels
- markus@cvs.openbsd.org 2000/09/07 14:53:00
[scp.c]
typo
- markus@cvs.openbsd.org 2000/09/07 15:13:37
[auth-options.c auth-options.h auth-rh-rsa.c auth-rsa.c auth.c]
[authfile.h canohost.c channels.h compat.c hostfile.h log.c match.h]
[pty.c readconf.c]
some more Copyright fixes
- markus@cvs.openbsd.org 2000/09/08 03:02:51
[README.openssh2]
bye bye
- deraadt@cvs.openbsd.org 2000/09/11 18:38:33
[LICENCE cipher.c]
a few more comments about it being ARC4 not RC4
- markus@cvs.openbsd.org 2000/09/12 14:53:11
[log-client.c log-server.c log.c ssh.1 ssh.c ssh.h sshd.8 sshd.c]
multiple debug levels
- markus@cvs.openbsd.org 2000/09/14 14:25:15
[clientloop.c]
typo
- deraadt@cvs.openbsd.org 2000/09/15 01:13:51
[ssh-agent.c]
check return value for setenv(3) for failure, and deal appropriately
|
|
- (djm) Import OpenBSD CVS changes
- markus@cvs.openbsd.org 2000/08/31 15:52:24
[Makefile sshd.8 sshd_config sftp-server.8 sftp-server.c]
implement a SFTP server. interops with sftp2, scp2 and the windows
client from ssh.com
- markus@cvs.openbsd.org 2000/08/31 15:56:03
[README.openssh2]
sync
- markus@cvs.openbsd.org 2000/08/31 16:05:42
[session.c]
Wall
- markus@cvs.openbsd.org 2000/08/31 16:09:34
[authfd.c ssh-agent.c]
add a flag to SSH2_AGENTC_SIGN_REQUEST for future extensions
- deraadt@cvs.openbsd.org 2000/09/01 09:25:13
[scp.1 scp.c]
cleanup and fix -S support; stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2000/09/01 16:29:32
[sftp-server.c]
portability fixes
- markus@cvs.openbsd.org 2000/09/01 16:32:41
[sftp-server.c]
fix cast; mouring@pconline.com
- itojun@cvs.openbsd.org 2000/09/03 09:23:28
[ssh-add.1 ssh.1]
add missing .El against .Bl.
- markus@cvs.openbsd.org 2000/09/04 13:03:41
[session.c]
missing close; ok theo
- markus@cvs.openbsd.org 2000/09/04 13:07:21
[session.c]
fix get_last_login_time order; from andre@van-veen.de
- markus@cvs.openbsd.org 2000/09/04 13:10:09
[sftp-server.c]
more cast fixes; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/09/04 13:06:04
[session.c]
set SSH_ORIGINAL_COMMAND; from Leakin@dfw.nostrum.com, bet@rahul.net
- (djm) Cleanup after import. Fix sftp-server compilation, Makefile
|
