summaryrefslogtreecommitdiff
path: root/ssh-keygen.1
AgeCommit message (Collapse)Author
2010-01-04Remove/adjust manual page references to BSD-specific /etc/rc (closes:Colin Watson
#513417).
2010-01-01* New upstream release (closes: #536182). Yes, I know 5.3p1 has been outColin Watson
for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958).
2008-11-03 - sthen@cvs.openbsd.org 2008/07/24 23:55:30Damien Miller
[ssh-keygen.1] Add "ssh-keygen -F -l" to synopsis (displays fingerprint from known_hosts). ok djm@
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-06-13 - jmc@cvs.openbsd.org 2008/06/12 19:10:09Darren Tucker
[ssh_config.5 ssh-keygen.1] tweak the ascii art text; ok grunk
2008-06-13 - grunk@cvs.openbsd.org 2008/06/11 22:20:46Darren Tucker
[ssh-keygen.c ssh-keygen.1] ssh-keygen would write fingerprints to STDOUT, and random art to STDERR, that is not how it was envisioned. Also correct manpage saying that -v is needed along with -l for it to work. spotted by naddy@
2008-06-13 - grunk@cvs.openbsd.org 2008/06/11 21:01:35Darren Tucker
[ssh_config.5 key.h readconf.c readconf.h ssh-keygen.1 ssh-keygen.c key.c sshconnect.c] Introduce SSH Fingerprint ASCII Visualization, a technique inspired by the graphical hash visualization schemes known as "random art", and by Dan Kaminsky's musings on the subject during a BlackOp talk at the 23C3 in Berlin. Scientific publication (original paper): "Hash Visualization: a New Technique to improve Real-World Security", Perrig A. and Song D., 1999, International Workshop on Cryptographic Techniques and E-Commerce (CrypTEC '99) http://sparrow.ece.cmu.edu/~adrian/projects/validation/validation.pdf The algorithm used here is a worm crawling over a discrete plane, leaving a trace (augmenting the field) everywhere it goes. Movement is taken from dgst_raw 2bit-wise. Bumping into walls makes the respective movement vector be ignored for this turn, thus switching to the other color of the chessboard. Graphs are not unambiguous for now, because circles in graphs can be walked in either direction. discussions with several people, help, corrections and ok markus@ djm@
2008-06-08Add cross-references to ssh-vulnkey(1) to ssh(1), ssh-add(1),Colin Watson
ssh-keygen(1), and sshd(8) (closes: #484451).
2007-12-23Import OpenSSH 4.7p1.Colin Watson
2007-06-05 - jmc@cvs.openbsd.org 2007/05/31 19:20:16Darren Tucker
[scp.1 ssh_config.5 sftp-server.8 ssh-agent.1 sshd_config.5 sftp.1 ssh-keygen.1 ssh-keyscan.1 ssh-add.1 sshd.8 ssh.1 ssh-keysign.8] convert to new .Dd format; (We will need to teach mdoc2man.awk to understand this too.)
2007-02-19 - jmc@cvs.openbsd.org 2007/01/12 20:20:41Darren Tucker
[ssh-keygen.1 ssh-keygen.c] more secsh -> rfc 4716 updates; spotted by wiz@netbsd ok markus
2007-01-05 - markus@cvs.openbsd.org 2006/12/11 21:25:46Damien Miller
[ssh-keygen.1 ssh.1] add rfc 4716 (public key format); ok jmc
2005-11-28 [ssh-keygen.1 ssh-keygen.c]Darren Tucker
Enforce DSA key length of exactly 1024 bits to comply with FIPS-186-2, increase minumum RSA key size to 768 bits and update man page to reflect these. Patch originally bz#1119 (senthilkumar_sen at hotpop.com), ok djm@, grudging ok deraadt@.
2005-11-05 - jmc@cvs.openbsd.org 2005/10/31 19:55:25Damien Miller
[ssh-keygen.1] grammar;
2005-11-05 - djm@cvs.openbsd.org 2005/10/31 11:12:49Damien Miller
[ssh-keygen.1 ssh-keygen.c] generate a protocol 2 RSA key by default
2005-06-16 - djm@cvs.openbsd.org 2005/06/08 03:50:00Damien Miller
[ssh-keygen.1 ssh-keygen.c sshd.8] increase default rsa/dsa key length from 1024 to 2048 bits; ok markus@ deraadt@
2005-05-26 - djm@cvs.openbsd.org 2005/04/21 06:17:50Damien Miller
[ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh.1 ssh_config.5 sshd.8] [sshd_config.5] OpenSSH doesn't ever look at the $HOME environment variable, so don't say that we do (bz #623); ok deraadt@
2005-03-14 - dtucker@cvs.openbsd.org 2005/03/14 10:09:03Darren Tucker
[ssh-keygen.1] Correct description of -H (bz #997); ok markus@, punctuation jmc@
2005-03-02 - jmc@cvs.openbsd.org 2005/03/01 18:15:56Damien Miller
[ssh-keygen.1] sort options (no attempt made at synopsis clean up though); spelling (occurance -> occurrence); use prompt before examples; grammar;
2005-03-02 - jmc@cvs.openbsd.org 2005/03/01 15:05:00Damien Miller
[ssh-keygen.1] whitespace;
2005-03-01 - djm@cvs.openbsd.org 2005/03/01 10:42:49Damien Miller
[ssh-keygen.1 ssh-keygen.c ssh_config.5] add tools for managing known_hosts files with hashed hostnames, including hashing existing files and deleting hosts by name; ok markus@ deraadt@
2004-08-13 - jmc@cvs.openbsd.org 2004/08/13 00:01:43Darren Tucker
[ssh-keygen.1] kill whitespace at eol;
2004-08-13 - jakob@cvs.openbsd.org 2004/08/12 21:41:13Darren Tucker
[ssh-keygen.1 ssh.1] improve SSHFP documentation; ok deraadt@
2003-12-31 - djm@cvs.openbsd.org 2003/12/22 09:16:58Darren Tucker
[moduli.c ssh-keygen.1 ssh-keygen.c] tidy up moduli generation debugging, add -v (verbose/debug) option to ssh-keygen; ok markus@
2003-08-02 - djm@cvs.openbsd.org 2003/07/28 09:49:56Darren Tucker
[ssh-keygen.1 ssh-keygen.c] Support for generating Diffie-Hellman groups (/etc/moduli) from ssh-keygen. Based on code from Phil Karn, William Allen Simpson and Niels Provos. ok markus@, thanks jmc@
2003-06-11 - jmc@cvs.openbsd.org 2003/06/10 09:12:11Damien Miller
[scp.1 sftp-server.8 ssh.1 ssh-add.1 ssh-agent.1 ssh_config.5] [sshd.8 sshd_config.5 ssh-keygen.1 ssh-keyscan.1 ssh-keysign.8] - section reorder - COMPATIBILITY merge - macro cleanup - kill whitespace at EOL - new sentence, new line ssh pages ok markus@
2003-05-23 - jmc@cvs.openbsd.org 2003/05/20 12:09:31Damien Miller
[ssh.1 ssh_config.5 sshd.8 sshd_config.5 ssh-keygen.1] new sentence, new line
2003-05-15 - jakob@cvs.openbsd.org 2003/05/14 18:16:20Damien Miller
[key.c key.h readconf.c readconf.h ssh_config.5 sshconnect.c] [dns.c dns.h README.dns ssh-keygen.1 ssh-keygen.c] add experimental support for verifying hos keys using DNS as described in draft-ietf-secsh-dns-xx.txt. more information in README.dns. ok markus@ and henning@
2003-04-01 - (djm) OpenBSD CVS SyncDamien Miller
- jmc@cvs.openbsd.org 2003/03/28 10:11:43 [scp.1 sftp.1 ssh.1 ssh-add.1 ssh-agent.1 ssh_config.5 sshd_config.5] [ssh-keygen.1 ssh-keyscan.1 ssh-keysign.8] - killed whitespace - new sentence new line - .Bk for arguments ok markus@
2002-12-23 - stevesk@cvs.openbsd.org 2002/11/26 02:35:30Ben Lindstrom
[ssh-keygen.1] remove outdated statement; ok markus@ deraadt@
2002-06-21 - deraadt@cvs.openbsd.org 2002/06/19 00:27:55Ben Lindstrom
[auth-bsdauth.c auth-skey.c auth1.c auth2-chall.c auth2-none.c authfd.c authfd.h monitor_wrap.c msg.c nchan.c radix.c readconf.c scp.c sftp.1 ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh-keysign.c ssh.1 sshconnect.c sshconnect.h sshconnect2.c ttymodes.c xmalloc.h] KNF done automatically while reading....
2002-02-19 - stevesk@cvs.openbsd.org 2002/02/16 14:53:37Damien Miller
[ssh-keygen.1] -t required now for key generation
2002-01-22 - djm@cvs.openbsd.org 2001/12/21 08:52:22Damien Miller
[ssh-keygen.1 ssh-keygen.c] Remove default (rsa1) key type; ok markus@
2001-12-06 - stevesk@cvs.openbsd.org 2001/11/21 18:49:14Ben Lindstrom
[ssh-keygen.1] more on passphrase construction; ok markus@
2001-11-12 - markus@cvs.openbsd.org 2001/10/25 21:14:32Damien Miller
[ssh-keygen.1 ssh-keygen.c] better docu for fingerprinting, ok deraadt@
2001-09-12 - deraadt@cvs.openbsd.org 2001/09/05 06:23:07Ben Lindstrom
[scp.1 sftp.1 ssh.1 ssh-agent.1 sshd.8 ssh-keygen.1 ssh-keyscan.1] avoid first person in manual pages
2001-08-06 - jakob@cvs.openbsd.org 2001/08/02 15:07:23Ben Lindstrom
[ssh-keygen.1] document smartcard upload/download. ok markus@
2001-08-06 - aaron@cvs.openbsd.org 2001/07/23 14:14:18Ben Lindstrom
[ssh-keygen.1] Fix typo.
2001-07-04 - markus@cvs.openbsd.org 2001/06/25 17:18:27Ben Lindstrom
[ssh-keygen.1] sshd(8) will never read the private keys, but ssh(1) does; hugh@mimosa.com
2001-06-25 - deraadt@cvs.openbsd.org 2001/06/23 05:57:09Ben Lindstrom
[sftp.1 sftp-server.8 ssh-keygen.1] ok, tmac is now fixed
2001-06-25 - deraadt@cvs.openbsd.org 2001/06/23 02:33:05Ben Lindstrom
[sftp.1 sftp-server.8 ssh-keygen.1] join .%A entries; most by bk@rt.fm
2001-06-25 - markus@cvs.openbsd.org 2001/06/22 21:55:49Ben Lindstrom
[auth2.c auth-rsa.c pathnames.h ssh.1 sshd.8 sshd_config ssh-keygen.1] merge authorized_keys2 into authorized_keys. authorized_keys2 is used for backward compat. (just append authorized_keys2 to authorized_keys).
2001-06-09 - markus@cvs.openbsd.org 2001/06/03 19:36:44Ben Lindstrom
[ssh-keygen.1] 1-2 bits of entrophy per character (not per word), ok stevesk@
2001-05-06 - stevesk@cvs.openbsd.org 2001/05/05 13:42:52Ben Lindstrom
[sftp.1 ssh-add.1 ssh-keygen.1] typos, grammar
2001-04-24 - markus@cvs.openbsd.org 2001/04/23 21:57:07Ben Lindstrom
[ssh-keygen.1 ssh-keygen.c] allow public key for -e, too
2001-04-23 - markus@cvs.openbsd.org 2001/04/22 23:58:36Ben Lindstrom
[ssh-keygen.1 ssh.1 sshd.8] document hostbased and other cleanup
2001-04-22 - markus@cvs.openbsd.org 2001/04/22 13:41:02Ben Lindstrom
[ssh-keygen.1 ssh-keygen.c] style, noted by stevesk; sort flags in usage
2001-04-22 - markus@cvs.openbsd.org 2001/04/22 13:25:37Ben Lindstrom
[ssh-keygen.1 ssh-keygen.c] rename arguments -x -> -e (export key), -X -> -i (import key) xref draft-ietf-secsh-publickeyfile-01.txt
2001-04-11 - itojun@cvs.openbsd.org 2001/04/10 09:13:22Ben Lindstrom
[ssh-add.1 ssh-agent.1 ssh-keygen.1 ssh.1 sshd.8] document id_rsa{.pub,}. markus ok
2001-03-12 - markus@cvs.openbsd.org 2001/03/11 22:33:24Ben Lindstrom
[ssh-keygen.1 ssh-keygen.c] remove -v again. use -B instead for bubblebabble. make -B consistent with -l and make -B work with /path/to/known_hosts. ok deraadt@