| Age | Commit message (Collapse) | Author |
|---|
|
obliterate ssh1.h and some dead code that used it
ok markus@
Upstream-ID: 1ca9159a9fb95618f9d51e069ac8e1131a087343
|
|
remove KEY_RSA1
ok markus@
Upstream-ID: 7408517b077c892a86b581e19f82a163069bf133
|
|
remove compat20/compat13/compat15 variables
ok markus@
Upstream-ID: 43802c035ceb3fef6c50c400e4ecabf12354691c
|
|
unifdef WITH_SSH1 ok markus@
Upstream-ID: 9716e62a883ef8826c57f4d33b4a81a9cc7755c7
|
|
ensure hostname is lower-case before hashing it;
bz#2591 reported by Griff Miller II; ok dtucker@
Upstream-ID: c3b8b93804f376bd00d859b8bcd9fc0d86b4db17
|
|
correctly hash hosts with a port number. Reported by Josh
Powers in bz#2692; ok dtucker@
Upstream-ID: 468e357ff143e00acc05bdd2803a696b3d4b6442
|
|
Avoid confusing error message when attempting to use
ssh-keyscan built without SSH protocol v.1 to scan for v.1 keys; bz#2583
Upstream-ID: 5d214abd3a21337d67c6dcc5aa6f313298d0d165
|
|
add support for additional fixed DH groups from
draft-ietf-curdle-ssh-kex-sha2-03
diffie-hellman-group14-sha256 (2K group)
diffie-hellman-group16-sha512 (4K group)
diffie-hellman-group18-sha512 (8K group)
based on patch from Mark D. Baushke and Darren Tucker
ok markus@
Upstream-ID: ac00406ada4f0dfec41585ca0839f039545bc46f
|
|
Add a function to enable security-related malloc_options.
With and ok deraadt@, something similar has been in the snaps for a while.
Upstream-ID: 43a95523b832b7f3b943d2908662191110c380ed
|
|
-c before -H, in SYNOPSIS and usage();
Upstream-ID: 25e8c58a69e1f37fcd54ac2cd1699370acb5e404
|
|
Add "ssh-keyscan -c ..." flag to allow fetching
certificates instead of plain keys; ok markus@
Upstream-ID: 0947e2177dba92339eced9e49d3c5bf7dda69f82
|
|
fix keyscan output for multiple hosts/addrs on one line
when host hashing or a non standard port is in use; bz#2479 ok dtucker@
Upstream-ID: 5321dabfaeceba343da3c8a8b5754c6f4a0a307b
|
|
include port number if a non-default one has been
specified; based on patch from Michael Handler
|
|
Do not use int for sig_atomic_t; spotted by
christos@netbsd; ok markus@
|
|
Ifdef out the ECC parts when building with an OpenSSL that doesn't have
it.
|
|
set a timeout to prevent hangs when talking to busted
servers; ok markus@
|
|
avoid more fatal/exit in the packet.c paths that
ssh-keyscan uses; feedback and "looks good" markus@
|
|
avoid fatal() calls in packet code makes ssh-keyscan more
reliable against server failures ok dtucker@ markus@
|
|
temporary measure until active_state goes away entirely
|
|
Reduce use of <sys/param.h> and transition to <limits.h>
throughout. ok djm markus
|
|
switch ssh-keyscan from setjmp to multiple ssh transport
layer instances ok djm@
|
|
adapt kex to sshbuf and struct ssh; ok djm@
|
|
explicitly include sys/param.h in files that use the
howmany() macro; from portable
|
|
[auth.c authfd.c authfile.c bufaux.c cipher.c cipher.h hostfile.c]
[kex.c key.c mac.c monitor.c monitor_wrap.c myproposal.h packet.c]
[roaming_client.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-pkcs11.h ssh.c sshconnect.c sshconnect2.c sshd.c]
make compiling against OpenSSL optional (make OPENSSL=no);
reduces algorithms to curve25519, aes-ctr, chacha, ed25519;
allows us to explore further options; with and ok djm
|
|
repeatedly):
- markus@cvs.openbsd.org 2014/03/25 09:40:03
[myproposal.h]
trimm default proposals.
This commit removes the weaker pre-SHA2 hashes, the broken ciphers
(arcfour), and the broken modes (CBC) from the default configuration
(the patch only changes the default, all the modes are still available
for the config files).
ok djm@, reminded by tedu@ & naddy@ and discussed with many
- deraadt@cvs.openbsd.org 2014/03/26 17:16:26
[myproposal.h]
The current sharing of myproposal[] between both client and server code
makes the previous diff highly unpallatable. We want to go in that
direction for the server, but not for the client. Sigh.
Brought up by naddy.
- markus@cvs.openbsd.org 2014/03/27 23:01:27
[myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
disable weak proposals in sshd, but keep them in ssh; ok djm@
|
|
[ssh-keyscan.c]
scan for Ed25519 keys by default too
|
|
[authfd.c authfile.c key.c key.h myproposal.h pathnames.h readconf.c]
[servconf.c ssh-agent.c ssh-keygen.c ssh-keyscan.1 ssh-keyscan.c]
[ssh-keysign.c ssh.c ssh_config.5 sshd.8 sshd.c verify.c ssh-ed25519.c]
[sc25519.h sc25519.c hash.c ge25519_base.data ge25519.h ge25519.c]
[fe25519.h fe25519.c ed25519.c crypto_api.h blocks.c]
support ed25519 keys (hostkeys and user identities) using the public
domain ed25519 reference code from SUPERCOP, see
http://ed25519.cr.yp.to/software.html
feedback, help & ok djm@
|
|
[kex.c kex.h myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
use curve25519 for default key exchange (curve25519-sha256@libssh.org);
initial patch from Aris Adamantiadis; ok djm@
|
|
[xmalloc.h cipher.c sftp-glob.c ssh-keyscan.c ssh.c sftp-common.c
ssh-ecdsa.c auth2-chall.c compat.c readconf.c kexgexs.c monitor.c
gss-genr.c cipher-3des1.c kex.c monitor_wrap.c ssh-pkcs11-client.c
auth-options.c rsa.c auth2-pubkey.c sftp.c hostfile.c auth2.c
servconf.c auth.c authfile.c xmalloc.c uuencode.c sftp-client.c
auth2-gss.c sftp-server.c bufaux.c mac.c session.c jpake.c kexgexc.c
sshconnect.c auth-chall.c auth2-passwd.c sshconnect1.c buffer.c
kexecdhs.c kexdhs.c ssh-rsa.c auth1.c ssh-pkcs11.c auth2-kbdint.c
kexdhc.c sshd.c umac.c ssh-dss.c auth2-jpake.c bufbn.c clientloop.c
monitor_mm.c scp.c roaming_client.c serverloop.c key.c auth-rsa.c
ssh-pkcs11-helper.c ssh-keysign.c ssh-keygen.c match.c channels.c
sshconnect2.c addrmatch.c mux.c canohost.c kexecdhc.c schnorr.c
ssh-add.c misc.c auth2-hostbased.c ssh-agent.c bufec.c groupaccess.c
dns.c packet.c readpass.c authfd.c moduli.c]
bye, bye xfree(); ok markus@
|
|
[ssh-keyscan.1 ssh-keyscan.c]
now that sshd defaults to offering ECDSA keys, ssh-keyscan should also
look for them by default; bz#1971
|
|
[ssh-keyscan.c]
use timerclear macro
ok djm@
|
|
[entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c]
[ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh]
[regress/README.regress] Remove ssh-rand-helper and all its
tentacles. PRNGd seeding has been rolled into entropy.c directly.
Thanks to tim@ for testing on affected platforms.
|
|
[ssh-keyscan.c]
handle ecdsa-sha2 with various key lengths; hint and ok djm@
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
[ssh-keyscan.c]
replace verbose and overflow-prone Linebuf code with read_keyfile_line()
based on patch from joachim AT joachimschipper.nl; bz#1565; ok dtucker@
|
|
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
|
|
Remove hacks add for RoutingDomain in preparation for its removal.
|
|
RoutingDomain an unsupported option on platforms that don't have it.
|
|
[readconf.c servconf.c misc.h ssh-keyscan.c misc.c]
validate routing domain is in range 0-RT_TABLEID_MAX.
'Looks right' deraadt@
|
|
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
|
|
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
|
|
[ssh-keyscan.1 ssh-keyscan.c]
the ellipsis is not an optional argument; while here, improve spacing.
|
|
[packet.c scp.c serverloop.c sftp-client.c ssh-agent.c ssh-keyscan.c]
[sshd.c] Explicitly handle EWOULDBLOCK wherever we handle EAGAIN, on
some platforms (HP nonstop) it is a distinct errno;
bz#1467 reported by sconeu AT yahoo.com; ok dtucker@
|
|
[ssh-keyscan.1 ssh-keyscan.c]
default to rsa (protocol 2) keys, instead of rsa1 keys; spotted by
larsnooden AT openoffice.org
|
|
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c
sshd.c]
Add a small helper function to consistently handle the EAI_SYSTEM error
code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417.
ok markus@ stevesk@
|
|
[ssh-agent.c ssh-keyscan.c ssh.c]
sys/resource.h needs sys/time.h; prompted by brad@
(NB. Id sync only for portable)
|
|
openbsd-compat/bindresvport.c openbsd-compat/getrrsetbyname.c
openbsd-compat/port-tun.c openbsd-compat/rresvport.c] Include <arpa/inet.h>
for hton* and ntoh* macros. Required on (at least) HP-UX since we define
_XOPEN_SOURCE_EXTENDED. Found by santhi.amirta at gmail com.
|
|
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c]
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ]
[auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c]
[buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c]
[groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c]
[kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c]
[key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c]
[monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c]
[readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h]
[serverloop.c session.c session.h sftp-client.c sftp-common.c]
[sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c]
[ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c]
[sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c]
[uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h]
[loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h]
almost entirely get rid of the culture of ".h files that include .h files"
ok djm, sort of ok stevesk
makes the pain stop in one easy step
NB. portable commit contains everything *except* removing includes.h, as
that will take a fair bit more work as we move headers that are required
for portability workarounds to defines.h. (also, this step wasn't "easy")
|
|
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c]
[auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c]
[channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c]
[kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c]
[monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c]
[servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c]
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c]
[sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c]
[uuencode.h xmalloc.c]
move #include <stdio.h> out of includes.h
|
|
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c]
[hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c]
[scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c]
[ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c]
[sshconnect1.c sshd.c xmalloc.c]
move #include <stdlib.h> out of includes.h
|
