| Age | Commit message (Collapse) | Author |
|---|
|
[clientloop.c ssh.c sshconnect.c sshconnect.h]
kill proxy command on fatal() (we already kill it on clean exit);
ok markus@
|
|
[ssh.c]
install a SIGCHLD handler to reap expiried child process; ok markus@
|
|
for missing headers and compiler warnings.
|
|
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c]
[ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on
platforms that don't have the requisite OpenSSL support. ok dtucker@
|
|
[ssh.c]
unbreak ControlPersist=yes for ControlMaster=yes; ok djm@
|
|
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
reintroduce commit from tedu@, which I pulled out for release
engineering:
OpenSSL_add_all_algorithms is the name of the function we have a
man page for, so use that. ok djm
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
backout previous temporarily; discussed with deraadt@
|
|
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
OpenSSL_add_all_algorithms is the name of the function we have a man page
for, so use that. ok djm
|
|
[ssh.c]
close any extra file descriptors inherited from parent at start and
reopen stdin/stdout to /dev/null when forking for ControlPersist.
prevents tools that fork and run a captive ssh for communication from
failing to exit when the ssh completes while they wait for these fds to
close. The inherited fds may persist arbitrarily long if a background
mux master has been started by ControlPersist. cvs and scp were effected
by this.
"please commit" markus@
|
|
[auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8]
[ssh-keysign.c ssh.c]
enable certificates for hostbased authentication, from Iain Morgan;
"looks ok" markus@
|
|
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
|
|
[ssh.c ssh_config.5]
expand %h to the hostname in ssh_config Hostname options. While this
sounds useless, it is actually handy for working with unqualified
hostnames:
Host *.*
Hostname %h
Host *
Hostname %h.example.org
"I like it" markus@
|
|
[ssh.c]
Make ExitOnForwardFailure work with fork-after-authentication ("ssh -f")
for protocol 2. ok markus@
|
|
[ssh.c]
oops, forgot to #include <canohost.h>; spotted and patch from chl@
|
|
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
|
|
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
|
|
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c]
mux support for remote forwarding with dynamic port allocation,
use with
LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost`
feedback and ok djm@
|
|
[channels.c channels.h mux.c ssh.c]
Pause the mux channel while waiting for reply from aynch callbacks.
Prevents misordering of replies if new requests arrive while waiting.
Extend channel open confirm callback to allow signalling failure
conditions as well as success. Use this to 1) fix a memory leak, 2)
start using the above pause mechanism and 3) delay sending a success/
failure message on mux slave session open until we receive a reply from
the server.
motivated by and with feedback from markus@
|
|
[ssh.c]
bz#1746 - suppress spurious tty warning when using -O and stdin
is not a tty; ok dtucker@ markus@
|
|
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
|
|
[ssh-add.1 ssh-keygen.1 ssh.1 ssh.c]
tweak previous; ok markus
|
|
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
|
|
[channels.c channels.h clientloop.c clientloop.h mux.c nchan.c ssh.c]
rewrite ssh(1) multiplexing code to a more sensible protocol.
The new multiplexing code uses channels for the listener and
accepted control sockets to make the mux master non-blocking, so
no stalls when processing messages from a slave.
avoid use of fatal() in mux master protocol parsing so an errant slave
process cannot take down a running master.
implement requesting of port-forwards over multiplexed sessions. Any
port forwards requested by the slave are added to those the master has
established.
add support for stdio forwarding ("ssh -W host:port ...") in mux slaves.
document master/slave mux protocol so that other tools can use it to
control a running ssh(1). Note: there are no guarantees that this
protocol won't be incompatibly changed (though it is versioned).
feedback Salvador Fandino, dtucker@
channel changes ok markus@
|
|
[ssh_config channels.c ssh.1 channels.h ssh.c]
Add a 'netcat mode' (ssh -W). This connects stdio on the client to a
single port forward on the server. This allows, for example, using ssh as
a ProxyCommand to route connections via intermediate servers.
bz #1618, man page help from jmc@, ok markus@
|
|
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
|
|
[ssh.c sftp.c scp.c]
When passing user-controlled options with arguments to other programs,
pass the option and option argument as separate argv entries and
not smashed into one (e.g., as -l foo and not -lfoo). Also, always
pass a "--" argument to stop option parsing, so that a positional
argument that starts with a '-' isn't treated as an option. This
fixes some error cases as well as the handling of hostnames and
filenames that start with a '-'.
Based on a diff by halex@
ok halex@ djm@ deraadt@
|
|
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
|
|
[ssh.c]
Request roaming to be enabled if UseRoaming is true and the server
supports it.
ok markus@
|
|
[ssh.c]
allow for long home dir paths (bz #1615). ok deraadt
(based in part on a patch from jchadima at redhat)
|
|
- markus@cvs.openbsd.org 2009/03/17 21:37:00
[ssh.c]
pass correct argv[0] to openlog(); ok djm@
|
|
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c]
[readconf.h serverloop.c ssh.c]
support remote port forwarding with a zero listen port (-R0:...) to
dyamically allocate a listen port at runtime (this is actually
specified in rfc4254); bz#1003 ok markus@
|
|
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h]
[serverloop.c ssh-keyscan.c ssh.c sshd.c]
make a2port() return -1 when it encounters an invalid port number
rather than 0, which it will now treat as valid (needed for future work)
adjust current consumers of a2port() to check its return value is <= 0,
which in turn required some things to be converted from u_short => int
make use of int vs. u_short consistent in some other places too
feedback & ok markus@
|
|
[clientloop.c readconf.c readconf.h ssh.c]
merge dynamic forward parsing into parse_forward(); 'i think this is OK' djm@
|
|
[ssh.c]
add -y to usage();
|
|
[ssh.1 ssh.c]
Add -y option to force logging via syslog rather than stderr.
Useful for daemonised ssh connection (ssh -f). Patch originally from
and ok'd by markus@
|
|
[compat.c compat.h nchan.c ssh.c]
only send eow and no-more-sessions requests to openssh 5 and newer;
fixes interop problems with broken ssh v2 implementations; ok djm@
|
|
[ssh.1 ssh.c]
When forking after authentication ("ssh -f") with ExitOnForwardFailure
enabled, delay the fork until after replies for any -R forwards have
been seen. Allows for robust detection of -R forward failure when
using -f (similar to bz#92); ok dtucker@
|
|
[ssh_config.5 ssh.c]
keyword expansion for localcommand. ok djm@
|
|
[ssh.c]
thal shalt not code past the eightieth column
|
|
[clientloop.h ssh.c clientloop.c]
maintain an ordered queue of outstanding global requests that we
expect replies to, similar to the per-channel confirmation queue.
Use this queue to verify success or failure for remote forward
establishment in a race free way.
ok dtucker@
|
|
[PROTOCOL ssh.c serverloop.c]
Add a no-more-sessions@openssh.com global request extension that the
client sends when it knows that it will never request another session
(i.e. when session multiplexing is disabled). This allows a server to
disallow further session requests and terminate the session.
Why would a non-multiplexing client ever issue additional session
requests? It could have been attacked with something like SSH'jack:
http://www.storm.net.nz/projects/7
feedback & ok markus
|
|
[ssh.c]
dingo stole my diff hunk
|
|
[clientloop.c clientloop.h ssh.c mux.c]
tidy up session multiplexing code, moving it into its own file and
making the function names more consistent - making ssh.c and
clientloop.c a fair bit more readable.
ok markus@
|
|
[clientloop.c clientloop.h ssh.c]
Use new channel status confirmation callback system to properly deal
with "important" channel requests that fail, in particular command exec,
shell and subsystem requests. Previously we would optimistically assume
that the requests would always succeed, which could cause hangs if they
did not (e.g. when the server runs out of fds) or were unimplemented by
the server (bz #1384)
Also, properly report failing multiplex channel requests via the mux
client stderr (subject to LogLevel in the mux master) - better than
silently failing.
most bits ok markus@ (as part of a larger diff)
|
|
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c]
[monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c]
[ssh.c sshd.c]
Implement a channel success/failure status confirmation callback
mechanism. Each channel maintains a queue of callbacks, which will
be drained in order (RFC4253 guarantees confirm messages are not
reordered within an channel).
Also includes a abandonment callback to clean up if a channel is
closed without sending confirmation messages. This probably
shouldn't happen in compliant implementations, but it could be
abused to leak memory.
ok markus@ (as part of a larger diff)
|
|
openbsd-compat/openssl-compat.{c,h}] Bug #1437 Move the OpenSSL compat
header to after OpenSSL headers, since some versions of OpenSSL have
SSLeay_add_all_algorithms as a macro already.
|
|
[ssh.c]
ignore SIGPIPE in multiplex client mode - we can receive this if the
server runs out of fds on us midway. Report and patch from
gregory_shively AT fanniemae.com
|
|
[ssh.c]
avoid errno trashing in signal handler; ok dtucker
|
|
[ssh.c]
Use xstrdup/xfree when saving pwname and pwdir; ok deraadt@
|
