summaryrefslogtreecommitdiff
path: root/ssh.c
AgeCommit message (Collapse)Author
2010-10-07 - djm@cvs.openbsd.org 2010/10/06 06:39:28Damien Miller
[clientloop.c ssh.c sshconnect.c sshconnect.h] kill proxy command on fatal() (we already kill it on clean exit); ok markus@
2010-09-24 - djm@cvs.openbsd.org 2010/09/20 04:41:47Damien Miller
[ssh.c] install a SIGCHLD handler to reap expiried child process; ok markus@
2010-09-10 - (dtucker) [kex.h key.c packet.h ssh-agent.c ssh.c] A few more ECC ifdefsDarren Tucker
for missing headers and compiler warnings.
2010-09-10 - (djm) [authfd.c authfile.c bufec.c buffer.h configure.ac kex.h kexecdh.c]Damien Miller
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c] [ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on platforms that don't have the requisite OpenSSL support. ok dtucker@
2010-09-10 - markus@cvs.openbsd.org 2010/09/02 16:08:39Damien Miller
[ssh.c] unbreak ControlPersist=yes for ControlMaster=yes; ok djm@
2010-09-10 - djm@cvs.openbsd.org 2010/08/31 12:33:38Damien Miller
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c] reintroduce commit from tedu@, which I pulled out for release engineering: OpenSSL_add_all_algorithms is the name of the function we have a man page for, so use that. ok djm
2010-08-31 - djm@cvs.openbsd.org 2010/08/31 11:54:45Damien Miller
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c] [authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c] [monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c] [ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c] [ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h] [ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5] [uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c] Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. Only the mandatory sections of RFC5656 are implemented, specifically the three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and ECDSA. Point compression (optional in RFC5656 is NOT implemented). Certificate host and user keys using the new ECDSA key types are supported. Note that this code has not been tested for interoperability and may be subject to change. feedback and ok markus@
2010-08-31 - djm@cvs.openbsd.org 2010/08/16 04:06:06Damien Miller
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c] backout previous temporarily; discussed with deraadt@
2010-08-31 - tedu@cvs.openbsd.org 2010/08/12 23:34:39Damien Miller
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c] OpenSSL_add_all_algorithms is the name of the function we have a man page for, so use that. ok djm
2010-08-17 - djm@cvs.openbsd.org 2010/08/12 21:49:44Damien Miller
[ssh.c] close any extra file descriptors inherited from parent at start and reopen stdin/stdout to /dev/null when forking for ControlPersist. prevents tools that fork and run a captive ssh for communication from failing to exit when the ssh completes while they wait for these fds to close. The inherited fds may persist arbitrarily long if a background mux master has been started by ControlPersist. cvs and scp were effected by this. "please commit" markus@
2010-08-05 - djm@cvs.openbsd.org 2010/08/04 05:42:47Damien Miller
[auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8] [ssh-keysign.c ssh.c] enable certificates for hostbased authentication, from Iain Morgan; "looks ok" markus@
2010-08-03 - djm@cvs.openbsd.org 2010/07/19 09:15:12Damien Miller
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5] add a "ControlPersist" option that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but further hacked on by wmertens AT cisco.com, apb AT cequrux.com, martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
2010-07-16 - djm@cvs.openbsd.org 2010/07/12 22:41:13Damien Miller
[ssh.c ssh_config.5] expand %h to the hostname in ssh_config Hostname options. While this sounds useless, it is actually handy for working with unqualified hostnames: Host *.* Hostname %h Host * Hostname %h.example.org "I like it" markus@
2010-07-16 - djm@cvs.openbsd.org 2010/07/12 22:38:52Damien Miller
[ssh.c] Make ExitOnForwardFailure work with fork-after-authentication ("ssh -f") for protocol 2. ok markus@
2010-07-02 - djm@cvs.openbsd.org 2010/06/26 23:04:04Damien Miller
[ssh.c] oops, forgot to #include <canohost.h>; spotted and patch from chl@
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 23:10:30Damien Miller
[ssh.c] log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts; "nice!" markus@
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 23:10:30Damien Miller
[ssh.c] log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts; "nice!" markus@
2010-05-21 - markus@cvs.openbsd.org 2010/05/16 12:55:51Damien Miller
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c] mux support for remote forwarding with dynamic port allocation, use with LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost` feedback and ok djm@
2010-05-21 - djm@cvs.openbsd.org 2010/05/14 23:29:23Damien Miller
[channels.c channels.h mux.c ssh.c] Pause the mux channel while waiting for reply from aynch callbacks. Prevents misordering of replies if new requests arrive while waiting. Extend channel open confirm callback to allow signalling failure conditions as well as success. Use this to 1) fix a memory leak, 2) start using the above pause mechanism and 3) delay sending a success/ failure message on mux slave session open until we receive a reply from the server. motivated by and with feedback from markus@
2010-04-16 - djm@cvs.openbsd.org 2010/04/10 00:00:16Damien Miller
[ssh.c] bz#1746 - suppress spurious tty warning when using -O and stdin is not a tty; ok dtucker@ markus@
2010-02-27 - OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2010/02/26 20:29:54 [PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c] [auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c] [hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c] [myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c] [ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c] [sshconnect2.c sshd.8 sshd.c sshd_config.5] Add support for certificate key types for users and hosts. OpenSSH certificate key types are not X.509 certificates, but a much simpler format that encodes a public key, identity information and some validity constraints and signs it with a CA key. CA keys are regular SSH keys. This certificate style avoids the attack surface of X.509 certificates and is very easy to deploy. Certified host keys allow automatic acceptance of new host keys when a CA certificate is marked as sh/known_hosts. see VERIFYING HOST KEYS in ssh(1) for details. Certified user keys allow authentication of users when the signing CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS FILE FORMAT" in sshd(8) for details. Certificates are minted using ssh-keygen(1), documentation is in the "CERTIFICATES" section of that manpage. Documentation on the format of certificates is in the file PROTOCOL.certkeys feedback and ok markus@
2010-02-12 - jmc@cvs.openbsd.org 2010/02/08 22:03:05Damien Miller
[ssh-add.1 ssh-keygen.1 ssh.1 ssh.c] tweak previous; ok markus
2010-02-12 - markus@cvs.openbsd.org 2010/02/08 10:50:20Damien Miller
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c] [ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5] replace our obsolete smartcard code with PKCS#11. ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11 provider (shared library) while ssh-agent(1) delegates PKCS#11 to a forked a ssh-pkcs11-helper process. PKCS#11 is currently a compile time option. feedback and ok djm@; inspired by patches from Alon Bar-Lev `
2010-01-26 - djm@cvs.openbsd.org 2010/01/26 01:28:35Damien Miller
[channels.c channels.h clientloop.c clientloop.h mux.c nchan.c ssh.c] rewrite ssh(1) multiplexing code to a more sensible protocol. The new multiplexing code uses channels for the listener and accepted control sockets to make the mux master non-blocking, so no stalls when processing messages from a slave. avoid use of fatal() in mux master protocol parsing so an errant slave process cannot take down a running master. implement requesting of port-forwards over multiplexed sessions. Any port forwards requested by the slave are added to those the master has established. add support for stdio forwarding ("ssh -W host:port ...") in mux slaves. document master/slave mux protocol so that other tools can use it to control a running ssh(1). Note: there are no guarantees that this protocol won't be incompatibly changed (though it is versioned). feedback Salvador Fandino, dtucker@ channel changes ok markus@
2010-01-12 - dtucker@cvs.openbsd.org 2010/01/11 01:39:46Darren Tucker
[ssh_config channels.c ssh.1 channels.h ssh.c] Add a 'netcat mode' (ssh -W). This connects stdio on the client to a single port forward on the server. This allows, for example, using ssh as a ProxyCommand to route connections via intermediate servers. bz #1618, man page help from jmc@, ok markus@
2010-01-10 - dtucker@cvs.openbsd.org 2010/01/09 23:04:13Darren Tucker
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c readconf.h scp.1 sftp.1 ssh_config.5 misc.h] Remove RoutingDomain from ssh since it's now not needed. It can be replaced with "route exec" or "nc -V" as a proxycommand. "route exec" also ensures that trafic such as DNS lookups stays withing the specified routingdomain. For example (from reyk): # route -T 2 exec /usr/sbin/sshd or inherited from the parent process $ route -T 2 exec sh $ ssh 10.1.2.3 ok deraadt@ markus@ stevesk@ reyk@
2010-01-08 - guenther@cvs.openbsd.org 2009/12/20 07:28:36Darren Tucker
[ssh.c sftp.c scp.c] When passing user-controlled options with arguments to other programs, pass the option and option argument as separate argv entries and not smashed into one (e.g., as -l foo and not -lfoo). Also, always pass a "--" argument to stop option parsing, so that a positional argument that starts with a '-' isn't treated as an option. This fixes some error cases as well as the handling of hostnames and filenames that start with a '-'. Based on a diff by halex@ ok halex@ djm@ deraadt@
2010-01-08 - reyk@cvs.openbsd.org 2009/10/28 16:38:18Darren Tucker
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1 sftp.1 sshd_config.5 readconf.c ssh.c misc.c] Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan. ok markus@
2010-01-08 - andreas@cvs.openbsd.org 2009/10/24 11:23:42Darren Tucker
[ssh.c] Request roaming to be enabled if UseRoaming is true and the server supports it. ok markus@
2009-07-06 - dtucker@cvs.openbsd.org 2009/07/02 02:11:47Darren Tucker
[ssh.c] allow for long home dir paths (bz #1615). ok deraadt (based in part on a patch from jchadima at redhat)
2009-06-21 - (dtucker) OpenBSD CVS SyncDarren Tucker
- markus@cvs.openbsd.org 2009/03/17 21:37:00 [ssh.c] pass correct argv[0] to openlog(); ok djm@
2009-02-14 - djm@cvs.openbsd.org 2009/02/12 03:00:56Damien Miller
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c] [readconf.h serverloop.c ssh.c] support remote port forwarding with a zero listen port (-R0:...) to dyamically allocate a listen port at runtime (this is actually specified in rfc4254); bz#1003 ok markus@
2009-01-28 - djm@cvs.openbsd.org 2009/01/22 10:02:34Damien Miller
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h] [serverloop.c ssh-keyscan.c ssh.c sshd.c] make a2port() return -1 when it encounters an invalid port number rather than 0, which it will now treat as valid (needed for future work) adjust current consumers of a2port() to check its return value is <= 0, which in turn required some things to be converted from u_short => int make use of int vs. u_short consistent in some other places too feedback & ok markus@
2008-11-03 - stevesk@cvs.openbsd.org 2008/11/01 17:40:33Damien Miller
[clientloop.c readconf.c readconf.h ssh.c] merge dynamic forward parsing into parse_forward(); 'i think this is OK' djm@
2008-11-03 - jmc@cvs.openbsd.org 2008/10/09 06:54:22Damien Miller
[ssh.c] add -y to usage();
2008-11-03 - djm@cvs.openbsd.org 2008/10/08 23:34:03Damien Miller
[ssh.1 ssh.c] Add -y option to force logging via syslog rather than stderr. Useful for daemonised ssh connection (ssh -f). Patch originally from and ok'd by markus@
2008-11-03 - markus@cvs.openbsd.org 2008/09/11 14:22:37Damien Miller
[compat.c compat.h nchan.c ssh.c] only send eow and no-more-sessions requests to openssh 5 and newer; fixes interop problems with broken ssh v2 implementations; ok djm@
2008-07-04 - djm@cvs.openbsd.org 2008/07/02 13:47:39Darren Tucker
[ssh.1 ssh.c] When forking after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f (similar to bz#92); ok dtucker@
2008-06-13 - dtucker@cvs.openbsd.org 2008/06/12 16:35:31Darren Tucker
[ssh_config.5 ssh.c] keyword expansion for localcommand. ok djm@
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 04:24:06Darren Tucker
[ssh.c] thal shalt not code past the eightieth column
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 04:06:00Darren Tucker
[clientloop.h ssh.c clientloop.c] maintain an ordered queue of outstanding global requests that we expect replies to, similar to the per-channel confirmation queue. Use this queue to verify success or failure for remote forward establishment in a race free way. ok dtucker@
2008-06-11 - djm@cvs.openbsd.org 2008/06/10 22:15:23Darren Tucker
[PROTOCOL ssh.c serverloop.c] Add a no-more-sessions@openssh.com global request extension that the client sends when it knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session. Why would a non-multiplexing client ever issue additional session requests? It could have been attacked with something like SSH'jack: http://www.storm.net.nz/projects/7 feedback & ok markus
2008-05-19 - djm@cvs.openbsd.org 2008/05/09 14:26:08Damien Miller
[ssh.c] dingo stole my diff hunk
2008-05-19 - djm@cvs.openbsd.org 2008/05/09 14:18:44Damien Miller
[clientloop.c clientloop.h ssh.c mux.c] tidy up session multiplexing code, moving it into its own file and making the function names more consistent - making ssh.c and clientloop.c a fair bit more readable. ok markus@
2008-05-19 - djm@cvs.openbsd.org 2008/05/08 13:06:11Damien Miller
[clientloop.c clientloop.h ssh.c] Use new channel status confirmation callback system to properly deal with "important" channel requests that fail, in particular command exec, shell and subsystem requests. Previously we would optimistically assume that the requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of fds) or were unimplemented by the server (bz #1384) Also, properly report failing multiplex channel requests via the mux client stderr (subject to LogLevel in the mux master) - better than silently failing. most bits ok markus@ (as part of a larger diff)
2008-05-19 - djm@cvs.openbsd.org 2008/05/08 12:02:23Damien Miller
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c] [monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c] [ssh.c sshd.c] Implement a channel success/failure status confirmation callback mechanism. Each channel maintains a queue of callbacks, which will be drained in order (RFC4253 guarantees confirm messages are not reordered within an channel). Also includes a abandonment callback to clean up if a channel is closed without sending confirmation messages. This probably shouldn't happen in compliant implementations, but it could be abused to leak memory. ok markus@ (as part of a larger diff)
2008-02-28 - (dtucker) [includes.h ssh-add.c ssh-agent.c ssh-keygen.c ssh.c sshd.cDarren Tucker
openbsd-compat/openssl-compat.{c,h}] Bug #1437 Move the OpenSSL compat header to after OpenSSL headers, since some versions of OpenSSL have SSLeay_add_all_algorithms as a macro already.
2008-02-10 - djm@cvs.openbsd.org 2008/01/19 20:51:26Damien Miller
[ssh.c] ignore SIGPIPE in multiplex client mode - we can receive this if the server runs out of fds on us midway. Report and patch from gregory_shively AT fanniemae.com
2007-12-02 - deraadt@cvs.openbsd.org 2007/11/03 02:03:49Darren Tucker
[ssh.c] avoid errno trashing in signal handler; ok dtucker
2007-12-02 - dtucker@cvs.openbsd.org 2007/11/03 02:00:32Darren Tucker
[ssh.c] Use xstrdup/xfree when saving pwname and pwdir; ok deraadt@