summaryrefslogtreecommitdiff
path: root/ssh.c
AgeCommit message (Collapse)Author
2012-09-07* New upstream release (http://www.openssh.com/txt/release-6.1).Colin Watson
- Enable pre-auth sandboxing by default for new installs. - Allow "PermitOpen none" to refuse all port-forwarding requests (closes: #543683).
2012-07-06 - djm@cvs.openbsd.org 2012/07/06 01:47:38Damien Miller
[ssh.c] move setting of tty_flag to after config parsing so RequestTTY options are correctly picked up. bz#1995 patch from przemoc AT gmail.com; ok dtucker@
2012-07-02 - dtucker@cvs.openbsd.org 2012/07/02 08:50:03Darren Tucker
[ssh.c] set interactive ToS for forwarded X11 sessions. ok djm@
2012-05-18* New upstream release (http://www.openssh.org/txt/release-6.0).Colin Watson
- Fix IPQoS not being set on non-mapped v4-in-v6 addressed connections (closes: #643312, #650512). - Add a new privilege separation sandbox implementation for Linux's new seccomp sandbox, automatically enabled on platforms that support it. (Note: privilege separation sandboxing is still experimental.)
2011-11-04 - djm@cvs.openbsd.org 2011/10/24 02:10:46Darren Tucker
[ssh.c] bz#1943: unbreak stdio forwarding when ControlPersist is in user - ssh was incorrectly requesting the forward in both the control master and slave. skip requesting it in the master to fix. ok markus@
2011-11-04 - djm@cvs.openbsd.org 2011/10/18 05:15:28Darren Tucker
[ssh.c] ssh(1): skip attempting to create ~/.ssh when -F is passed; ok markus@
2011-10-02 - markus@cvs.openbsd.org 2011/09/23 07:45:05Darren Tucker
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h] unbreak remote portforwarding with dynamic allocated listen ports: 1) send the actual listen port in the open message (instead of 0). this allows multiple forwardings with a dynamic listen port 2) update the matching permit-open entry, so we can identify where to connect to report: den at skbkontur.ru and P. Szczygielski feedback and ok djm@
2011-09-22 - djm@cvs.openbsd.org 2011/09/09 22:46:44Damien Miller
[channels.c channels.h clientloop.h mux.c ssh.c] support for cancelling local and remote port forwards via the multiplex socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request the cancellation of the specified forwardings; ok markus@
2011-09-06* New upstream release (http://www.openssh.org/txt/release-5.9).Colin Watson
- Introduce sandboxing of the pre-auth privsep child using an optional sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables mandatory restrictions on the syscalls the privsep child can perform. - Add new SHA256-based HMAC transport integrity modes from http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt. - The pre-authentication sshd(8) privilege separation slave process now logs via a socket shared with the master process, avoiding the need to maintain /dev/log inside the chroot (closes: #75043, #429243, #599240). - ssh(1) now warns when a server refuses X11 forwarding (closes: #504757). - sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths, separated by whitespace (closes: #76312). The authorized_keys2 fallback is deprecated but documented (closes: #560156). - ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4 ToS/DSCP (closes: #498297). - ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add - < /path/to/key" (closes: #229124). - Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691). - Say "required" rather than "recommended" in unprotected-private-key warning (LP: #663455).
2011-08-06 - djm@cvs.openbsd.org 2011/08/02 23:15:03Damien Miller
[ssh.c] typo in comment
2011-06-23 - djm@cvs.openbsd.org 2011/06/22 22:08:42Damien Miller
[channels.c channels.h clientloop.c clientloop.h mux.c ssh.c] hook up a channel confirm callback to warn the user then requested X11 forwarding was refused by the server; ok markus@
2011-06-03 - djm@cvs.openbsd.org 2011/06/03 00:54:38Damien Miller
[ssh.c] bz#1883 - setproctitle() to identify mux master; patch from Bert.Wesarg AT googlemail.com; ok dtucker@ NB. includes additional portability code to enable setproctitle emulation on platforms that don't support it.
2011-05-29 - djm@cvs.openbsd.org 2011/05/24 07:15:47Damien Miller
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c] Remove undocumented legacy options UserKnownHostsFile2 and GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile accept multiple paths per line and making their defaults include known_hosts2; ok markus
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:38:58Damien Miller
[ssh.c] fix dropping from previous diff
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:34:32Damien Miller
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5] Add a RequestTTY ssh_config option to allow configuration-based control over tty allocation (like -t/-T); ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:18:02Damien Miller
[ssh.c ssh_config.5] add a %L expansion (short-form of the local host name) for ControlPath; sync some more expansions with LocalCommand; ok markus@
2011-05-05 - djm@cvs.openbsd.org 2011/04/17 22:42:42Damien Miller
[PROTOCOL.mux clientloop.c clientloop.h mux.c ssh.1 ssh.c] allow graceful shutdown of multiplexing: request that a mux server removes its listener socket and refuse future multiplexing requests; ok markus@
2011-05-05 - (djm) [Makefile.in WARNING.RNG aclocal.m4 buildpkg.sh.in configure.ac]Damien Miller
[entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c] [ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh] [regress/README.regress] Remove ssh-rand-helper and all its tentacles. PRNGd seeding has been rolled into entropy.c directly. Thanks to tim@ for testing on affected platforms.
2011-01-25Backport SELinux build fix from CVS.Colin Watson
2011-01-25 - (djm) [configure.ac Makefile.in ssh.c openbsd-compat/port-linux.cDamien Miller
openbsd-compat/port-linux.h] Move SELinux-specific code from ssh.c to port-linux.c to avoid compilation errors. Add -lselinux to ssh when building with SELinux support to avoid linking failure; report from amk AT spamfence.net; ok dtucker
2011-01-24* New upstream release (http://www.openssh.org/txt/release-5.7):Colin Watson
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. - sftp(1)/sftp-server(8): add a protocol extension to support a hard link operation. It is available through the "ln" command in the client. The old "ln" behaviour of creating a symlink is available using its "-s" option or through the preexisting "symlink" command. - scp(1): Add a new -3 option to scp: Copies between two remote hosts are transferred through the local host (closes: #508613). - ssh(1): "atomically" create the listening mux socket by binding it on a temporary name and then linking it into position after listen() has succeeded. This allows the mux clients to determine that the server socket is either ready or stale without races (closes: #454784). Stale server sockets are now automatically removed (closes: #523250). - ssh(1): install a SIGCHLD handler to reap expired child process (closes: #594687). - ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent temporary directories (closes: #357469, although only if you arrange for ssh-agent to actually see $TMPDIR since the setgid bit will cause it to be stripped off).
2011-01-07 - djm@cvs.openbsd.org 2011/01/06 22:23:53Damien Miller
[ssh.c] unbreak %n expansion in LocalCommand; patch from bert.wesarg AT googlemail.com; ok markus@
2010-12-01 - djm@cvs.openbsd.org 2010/11/29 23:45:51Damien Miller
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c] [sshconnect.h sshconnect2.c] automatically order the hostkeys requested by the client based on which hostkeys are already recorded in known_hosts. This avoids hostkey warnings when connecting to servers with new ECDSA keys that are preferred by default; with markus@
2010-11-20 - djm@cvs.openbsd.org 2010/11/13 23:27:51Damien Miller
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h] [servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5] allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of hardcoding lowdelay/throughput. bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
2010-10-26Backport upstream patch to install a SIGCHLD handler to reap expired sshColin Watson
child processes, preventing lots of zombies when using ControlPersist (closes: #594687).
2010-10-07 - djm@cvs.openbsd.org 2010/10/06 06:39:28Damien Miller
[clientloop.c ssh.c sshconnect.c sshconnect.h] kill proxy command on fatal() (we already kill it on clean exit); ok markus@
2010-09-24 - djm@cvs.openbsd.org 2010/09/20 04:41:47Damien Miller
[ssh.c] install a SIGCHLD handler to reap expiried child process; ok markus@
2010-09-10 - (dtucker) [kex.h key.c packet.h ssh-agent.c ssh.c] A few more ECC ifdefsDarren Tucker
for missing headers and compiler warnings.
2010-09-10 - (djm) [authfd.c authfile.c bufec.c buffer.h configure.ac kex.h kexecdh.c]Damien Miller
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c] [ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on platforms that don't have the requisite OpenSSL support. ok dtucker@
2010-09-10 - markus@cvs.openbsd.org 2010/09/02 16:08:39Damien Miller
[ssh.c] unbreak ControlPersist=yes for ControlMaster=yes; ok djm@
2010-09-10 - djm@cvs.openbsd.org 2010/08/31 12:33:38Damien Miller
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c] reintroduce commit from tedu@, which I pulled out for release engineering: OpenSSL_add_all_algorithms is the name of the function we have a man page for, so use that. ok djm
2010-08-31 - djm@cvs.openbsd.org 2010/08/31 11:54:45Damien Miller
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c] [authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c] [monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c] [ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c] [ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h] [ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5] [uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c] Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. Only the mandatory sections of RFC5656 are implemented, specifically the three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and ECDSA. Point compression (optional in RFC5656 is NOT implemented). Certificate host and user keys using the new ECDSA key types are supported. Note that this code has not been tested for interoperability and may be subject to change. feedback and ok markus@
2010-08-31 - djm@cvs.openbsd.org 2010/08/16 04:06:06Damien Miller
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c] backout previous temporarily; discussed with deraadt@
2010-08-31 - tedu@cvs.openbsd.org 2010/08/12 23:34:39Damien Miller
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c] OpenSSL_add_all_algorithms is the name of the function we have a man page for, so use that. ok djm
2010-08-23* New upstream release (http://www.openssh.com/txt/release-5.6):Colin Watson
- Added a ControlPersist option to ssh_config(5) that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity (closes: #335697, #350898, #454787, #500573, #550262). - Support AuthorizedKeysFile, AuthorizedPrincipalsFile, HostbasedUsesNameFromPacketOnly, and PermitTunnel in sshd_config(5) Match blocks (closes: #549858). - sftp(1): fix ls in working directories that contain globbing characters in their pathnames (LP: #530714).
2010-08-17 - djm@cvs.openbsd.org 2010/08/12 21:49:44Damien Miller
[ssh.c] close any extra file descriptors inherited from parent at start and reopen stdin/stdout to /dev/null when forking for ControlPersist. prevents tools that fork and run a captive ssh for communication from failing to exit when the ssh completes while they wait for these fds to close. The inherited fds may persist arbitrarily long if a background mux master has been started by ControlPersist. cvs and scp were effected by this. "please commit" markus@
2010-08-05 - djm@cvs.openbsd.org 2010/08/04 05:42:47Damien Miller
[auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8] [ssh-keysign.c ssh.c] enable certificates for hostbased authentication, from Iain Morgan; "looks ok" markus@
2010-08-03 - djm@cvs.openbsd.org 2010/07/19 09:15:12Damien Miller
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5] add a "ControlPersist" option that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but further hacked on by wmertens AT cisco.com, apb AT cequrux.com, martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
2010-07-16 - djm@cvs.openbsd.org 2010/07/12 22:41:13Damien Miller
[ssh.c ssh_config.5] expand %h to the hostname in ssh_config Hostname options. While this sounds useless, it is actually handy for working with unqualified hostnames: Host *.* Hostname %h Host * Hostname %h.example.org "I like it" markus@
2010-07-16 - djm@cvs.openbsd.org 2010/07/12 22:38:52Damien Miller
[ssh.c] Make ExitOnForwardFailure work with fork-after-authentication ("ssh -f") for protocol 2. ok markus@
2010-07-02 - djm@cvs.openbsd.org 2010/06/26 23:04:04Damien Miller
[ssh.c] oops, forgot to #include <canohost.h>; spotted and patch from chl@
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 23:10:30Damien Miller
[ssh.c] log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts; "nice!" markus@
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 23:10:30Damien Miller
[ssh.c] log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts; "nice!" markus@
2010-05-21 - markus@cvs.openbsd.org 2010/05/16 12:55:51Damien Miller
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c] mux support for remote forwarding with dynamic port allocation, use with LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost` feedback and ok djm@
2010-05-21 - djm@cvs.openbsd.org 2010/05/14 23:29:23Damien Miller
[channels.c channels.h mux.c ssh.c] Pause the mux channel while waiting for reply from aynch callbacks. Prevents misordering of replies if new requests arrive while waiting. Extend channel open confirm callback to allow signalling failure conditions as well as success. Use this to 1) fix a memory leak, 2) start using the above pause mechanism and 3) delay sending a success/ failure message on mux slave session open until we receive a reply from the server. motivated by and with feedback from markus@
2010-04-16 - djm@cvs.openbsd.org 2010/04/10 00:00:16Damien Miller
[ssh.c] bz#1746 - suppress spurious tty warning when using -O and stdin is not a tty; ok dtucker@ markus@
2010-03-31Drop most of our "LogLevel SILENT" (-qq) patch. This was originallyColin Watson
introduced to match the behaviour of non-free SSH, in which -q does not suppress fatal errors, but matching the behaviour of OpenSSH upstream is much more important nowadays. We no longer document that -q does not suppress fatal errors (closes: #280609). Migrate "LogLevel SILENT" to "LogLevel QUIET" in sshd_config on upgrade.
2010-03-31* New upstream release (LP: #535029).Colin Watson
- After a transition period of about 10 years, this release disables SSH protocol 1 by default. Clients and servers that need to use the legacy protocol must explicitly enable it in ssh_config / sshd_config or on the command-line. - Remove the libsectok/OpenSC-based smartcard code and add support for PKCS#11 tokens. This support is enabled by default in the Debian packaging, since it now doesn't involve additional library dependencies (closes: #231472, LP: #16918). - Add support for certificate authentication of users and hosts using a new, minimal OpenSSH certificate format (closes: #482806). - Added a 'netcat mode' to ssh(1): "ssh -W host:port ...". - Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian package, this overlaps with the key blacklisting facility added in openssh 1:4.7p1-9, but with different file formats and slightly different scopes; for the moment, I've roughly merged the two.) - Various multiplexing improvements, including support for requesting port-forwardings via the multiplex protocol (closes: #360151). - Allow setting an explicit umask on the sftp-server(8) commandline to override whatever default the user has (closes: #496843). - Many sftp client improvements, including tab-completion, more options, and recursive transfer support for get/put (LP: #33378). The old mget/mput commands never worked properly and have been removed (closes: #270399, #428082). - Do not prompt for a passphrase if we fail to open a keyfile, and log the reason why the open failed to debug (closes: #431538). - Prevent sftp from crashing when given a "-" without a command. Also, allow whitespace to follow a "-" (closes: #531561).
2010-02-27 - OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2010/02/26 20:29:54 [PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c] [auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c] [hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c] [myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c] [ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c] [sshconnect2.c sshd.8 sshd.c sshd_config.5] Add support for certificate key types for users and hosts. OpenSSH certificate key types are not X.509 certificates, but a much simpler format that encodes a public key, identity information and some validity constraints and signs it with a CA key. CA keys are regular SSH keys. This certificate style avoids the attack surface of X.509 certificates and is very easy to deploy. Certified host keys allow automatic acceptance of new host keys when a CA certificate is marked as sh/known_hosts. see VERIFYING HOST KEYS in ssh(1) for details. Certified user keys allow authentication of users when the signing CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS FILE FORMAT" in sshd(8) for details. Certificates are minted using ssh-keygen(1), documentation is in the "CERTIFICATES" section of that manpage. Documentation on the format of certificates is in the file PROTOCOL.certkeys feedback and ok markus@
2010-02-12 - jmc@cvs.openbsd.org 2010/02/08 22:03:05Damien Miller
[ssh-add.1 ssh-keygen.1 ssh.1 ssh.c] tweak previous; ok markus