| Age | Commit message (Collapse) | Author |
|---|
|
- Enable pre-auth sandboxing by default for new installs.
- Allow "PermitOpen none" to refuse all port-forwarding requests
(closes: #543683).
|
|
[ssh.c]
move setting of tty_flag to after config parsing so RequestTTY options
are correctly picked up. bz#1995 patch from przemoc AT gmail.com;
ok dtucker@
|
|
[ssh.c]
set interactive ToS for forwarded X11 sessions. ok djm@
|
|
- Fix IPQoS not being set on non-mapped v4-in-v6 addressed connections
(closes: #643312, #650512).
- Add a new privilege separation sandbox implementation for Linux's new
seccomp sandbox, automatically enabled on platforms that support it.
(Note: privilege separation sandboxing is still experimental.)
|
|
[ssh.c]
bz#1943: unbreak stdio forwarding when ControlPersist is in user - ssh
was incorrectly requesting the forward in both the control master and
slave. skip requesting it in the master to fix. ok markus@
|
|
[ssh.c]
ssh(1): skip attempting to create ~/.ssh when -F is passed; ok markus@
|
|
[mux.c readconf.h channels.h compat.h compat.c ssh.c readconf.c channels.c version.h]
unbreak remote portforwarding with dynamic allocated listen ports:
1) send the actual listen port in the open message (instead of 0).
this allows multiple forwardings with a dynamic listen port
2) update the matching permit-open entry, so we can identify where
to connect to
report: den at skbkontur.ru and P. Szczygielski
feedback and ok djm@
|
|
[channels.c channels.h clientloop.h mux.c ssh.c]
support for cancelling local and remote port forwards via the multiplex
socket. Use ssh -O cancel -L xx:xx:xx -R yy:yy:yy user@host" to request
the cancellation of the specified forwardings; ok markus@
|
|
- Introduce sandboxing of the pre-auth privsep child using an optional
sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables
mandatory restrictions on the syscalls the privsep child can perform.
- Add new SHA256-based HMAC transport integrity modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt.
- The pre-authentication sshd(8) privilege separation slave process now
logs via a socket shared with the master process, avoiding the need to
maintain /dev/log inside the chroot (closes: #75043, #429243,
#599240).
- ssh(1) now warns when a server refuses X11 forwarding (closes:
#504757).
- sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths,
separated by whitespace (closes: #76312). The authorized_keys2
fallback is deprecated but documented (closes: #560156).
- ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4
ToS/DSCP (closes: #498297).
- ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add
- < /path/to/key" (closes: #229124).
- Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691).
- Say "required" rather than "recommended" in unprotected-private-key
warning (LP: #663455).
|
|
[ssh.c]
typo in comment
|
|
[channels.c channels.h clientloop.c clientloop.h mux.c ssh.c]
hook up a channel confirm callback to warn the user then requested X11
forwarding was refused by the server; ok markus@
|
|
[ssh.c]
bz#1883 - setproctitle() to identify mux master; patch from Bert.Wesarg
AT googlemail.com; ok dtucker@
NB. includes additional portability code to enable setproctitle emulation
on platforms that don't support it.
|
|
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c]
Remove undocumented legacy options UserKnownHostsFile2 and
GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile
accept multiple paths per line and making their defaults include
known_hosts2; ok markus
|
|
[ssh.c]
fix dropping from previous diff
|
|
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5]
Add a RequestTTY ssh_config option to allow configuration-based
control over tty allocation (like -t/-T); ok markus@
|
|
[ssh.c ssh_config.5]
add a %L expansion (short-form of the local host name) for ControlPath;
sync some more expansions with LocalCommand; ok markus@
|
|
[PROTOCOL.mux clientloop.c clientloop.h mux.c ssh.1 ssh.c]
allow graceful shutdown of multiplexing: request that a mux server
removes its listener socket and refuse future multiplexing requests;
ok markus@
|
|
[entropy.c ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-pkcs11-helper.c ssh-rand-helper.8 ssh-rand-helper.c]
[ssh.c ssh_prng_cmds.in sshd.c contrib/aix/buildbff.sh]
[regress/README.regress] Remove ssh-rand-helper and all its
tentacles. PRNGd seeding has been rolled into entropy.c directly.
Thanks to tim@ for testing on affected platforms.
|
|
|
|
openbsd-compat/port-linux.h] Move SELinux-specific code from ssh.c to
port-linux.c to avoid compilation errors. Add -lselinux to ssh when
building with SELinux support to avoid linking failure; report from
amk AT spamfence.net; ok dtucker
|
|
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH)
and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA
offer better performance than plain DH and DSA at the same equivalent
symmetric key length, as well as much shorter keys.
- sftp(1)/sftp-server(8): add a protocol extension to support a hard
link operation. It is available through the "ln" command in the
client. The old "ln" behaviour of creating a symlink is available
using its "-s" option or through the preexisting "symlink" command.
- scp(1): Add a new -3 option to scp: Copies between two remote hosts
are transferred through the local host (closes: #508613).
- ssh(1): "atomically" create the listening mux socket by binding it on
a temporary name and then linking it into position after listen() has
succeeded. This allows the mux clients to determine that the server
socket is either ready or stale without races (closes: #454784).
Stale server sockets are now automatically removed (closes: #523250).
- ssh(1): install a SIGCHLD handler to reap expired child process
(closes: #594687).
- ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent
temporary directories (closes: #357469, although only if you arrange
for ssh-agent to actually see $TMPDIR since the setgid bit will cause
it to be stripped off).
|
|
[ssh.c]
unbreak %n expansion in LocalCommand; patch from bert.wesarg AT
googlemail.com; ok markus@
|
|
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c]
[sshconnect.h sshconnect2.c]
automatically order the hostkeys requested by the client based on
which hostkeys are already recorded in known_hosts. This avoids
hostkey warnings when connecting to servers with new ECDSA keys
that are preferred by default; with markus@
|
|
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
|
|
child processes, preventing lots of zombies when using ControlPersist
(closes: #594687).
|
|
[clientloop.c ssh.c sshconnect.c sshconnect.h]
kill proxy command on fatal() (we already kill it on clean exit);
ok markus@
|
|
[ssh.c]
install a SIGCHLD handler to reap expiried child process; ok markus@
|
|
for missing headers and compiler warnings.
|
|
[kexecdhc.c kexecdhs.c key.c key.h myproposal.h packet.c readconf.c]
[ssh-agent.c ssh-ecdsa.c ssh-keygen.c ssh.c] Disable ECDH and ECDSA on
platforms that don't have the requisite OpenSSL support. ok dtucker@
|
|
[ssh.c]
unbreak ControlPersist=yes for ControlMaster=yes; ok djm@
|
|
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
reintroduce commit from tedu@, which I pulled out for release
engineering:
OpenSSL_add_all_algorithms is the name of the function we have a
man page for, so use that. ok djm
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
backout previous temporarily; discussed with deraadt@
|
|
[ssh-add.c ssh-agent.c ssh-keygen.c ssh-keysign.c ssh.c sshd.c]
OpenSSL_add_all_algorithms is the name of the function we have a man page
for, so use that. ok djm
|
|
- Added a ControlPersist option to ssh_config(5) that automatically
starts a background ssh(1) multiplex master when connecting. This
connection can stay alive indefinitely, or can be set to automatically
close after a user-specified duration of inactivity (closes: #335697,
#350898, #454787, #500573, #550262).
- Support AuthorizedKeysFile, AuthorizedPrincipalsFile,
HostbasedUsesNameFromPacketOnly, and PermitTunnel in sshd_config(5)
Match blocks (closes: #549858).
- sftp(1): fix ls in working directories that contain globbing
characters in their pathnames (LP: #530714).
|
|
[ssh.c]
close any extra file descriptors inherited from parent at start and
reopen stdin/stdout to /dev/null when forking for ControlPersist.
prevents tools that fork and run a captive ssh for communication from
failing to exit when the ssh completes while they wait for these fds to
close. The inherited fds may persist arbitrarily long if a background
mux master has been started by ControlPersist. cvs and scp were effected
by this.
"please commit" markus@
|
|
[auth.c auth2-hostbased.c authfile.c authfile.h ssh-keysign.8]
[ssh-keysign.c ssh.c]
enable certificates for hostbased authentication, from Iain Morgan;
"looks ok" markus@
|
|
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
|
|
[ssh.c ssh_config.5]
expand %h to the hostname in ssh_config Hostname options. While this
sounds useless, it is actually handy for working with unqualified
hostnames:
Host *.*
Hostname %h
Host *
Hostname %h.example.org
"I like it" markus@
|
|
[ssh.c]
Make ExitOnForwardFailure work with fork-after-authentication ("ssh -f")
for protocol 2. ok markus@
|
|
[ssh.c]
oops, forgot to #include <canohost.h>; spotted and patch from chl@
|
|
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
|
|
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
|
|
[PROTOCOL.mux clientloop.h mux.c readconf.c readconf.h ssh.1 ssh.c]
mux support for remote forwarding with dynamic port allocation,
use with
LPORT=`ssh -S muxsocket -R0:localhost:25 -O forward somehost`
feedback and ok djm@
|
|
[channels.c channels.h mux.c ssh.c]
Pause the mux channel while waiting for reply from aynch callbacks.
Prevents misordering of replies if new requests arrive while waiting.
Extend channel open confirm callback to allow signalling failure
conditions as well as success. Use this to 1) fix a memory leak, 2)
start using the above pause mechanism and 3) delay sending a success/
failure message on mux slave session open until we receive a reply from
the server.
motivated by and with feedback from markus@
|
|
[ssh.c]
bz#1746 - suppress spurious tty warning when using -O and stdin
is not a tty; ok dtucker@ markus@
|
|
introduced to match the behaviour of non-free SSH, in which -q does not
suppress fatal errors, but matching the behaviour of OpenSSH upstream is
much more important nowadays. We no longer document that -q does not
suppress fatal errors (closes: #280609). Migrate "LogLevel SILENT" to
"LogLevel QUIET" in sshd_config on upgrade.
|
|
- After a transition period of about 10 years, this release disables SSH
protocol 1 by default. Clients and servers that need to use the
legacy protocol must explicitly enable it in ssh_config / sshd_config
or on the command-line.
- Remove the libsectok/OpenSC-based smartcard code and add support for
PKCS#11 tokens. This support is enabled by default in the Debian
packaging, since it now doesn't involve additional library
dependencies (closes: #231472, LP: #16918).
- Add support for certificate authentication of users and hosts using a
new, minimal OpenSSH certificate format (closes: #482806).
- Added a 'netcat mode' to ssh(1): "ssh -W host:port ...".
- Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian
package, this overlaps with the key blacklisting facility added in
openssh 1:4.7p1-9, but with different file formats and slightly
different scopes; for the moment, I've roughly merged the two.)
- Various multiplexing improvements, including support for requesting
port-forwardings via the multiplex protocol (closes: #360151).
- Allow setting an explicit umask on the sftp-server(8) commandline to
override whatever default the user has (closes: #496843).
- Many sftp client improvements, including tab-completion, more options,
and recursive transfer support for get/put (LP: #33378). The old
mget/mput commands never worked properly and have been removed
(closes: #270399, #428082).
- Do not prompt for a passphrase if we fail to open a keyfile, and log
the reason why the open failed to debug (closes: #431538).
- Prevent sftp from crashing when given a "-" without a command. Also,
allow whitespace to follow a "-" (closes: #531561).
|
|
- djm@cvs.openbsd.org 2010/02/26 20:29:54
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys addrmatch.c auth-options.c]
[auth-options.h auth.h auth2-pubkey.c authfd.c dns.c dns.h hostfile.c]
[hostfile.h kex.h kexdhs.c kexgexs.c key.c key.h match.h monitor.c]
[myproposal.h servconf.c servconf.h ssh-add.c ssh-agent.c ssh-dss.c]
[ssh-keygen.1 ssh-keygen.c ssh-rsa.c ssh.1 ssh.c ssh2.h sshconnect.c]
[sshconnect2.c sshd.8 sshd.c sshd_config.5]
Add support for certificate key types for users and hosts.
OpenSSH certificate key types are not X.509 certificates, but a much
simpler format that encodes a public key, identity information and
some validity constraints and signs it with a CA key. CA keys are
regular SSH keys. This certificate style avoids the attack surface
of X.509 certificates and is very easy to deploy.
Certified host keys allow automatic acceptance of new host keys
when a CA certificate is marked as sh/known_hosts.
see VERIFYING HOST KEYS in ssh(1) for details.
Certified user keys allow authentication of users when the signing
CA key is marked as trusted in authorized_keys. See "AUTHORIZED_KEYS
FILE FORMAT" in sshd(8) for details.
Certificates are minted using ssh-keygen(1), documentation is in
the "CERTIFICATES" section of that manpage.
Documentation on the format of certificates is in the file
PROTOCOL.certkeys
feedback and ok markus@
|
|
[ssh-add.1 ssh-keygen.1 ssh.1 ssh.c]
tweak previous; ok markus
|
