summaryrefslogtreecommitdiff
path: root/ssh.c
AgeCommit message (Collapse)Author
2010-01-01* New upstream release (closes: #536182). Yes, I know 5.3p1 has been outColin Watson
for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958).
2009-02-14 - djm@cvs.openbsd.org 2009/02/12 03:00:56Damien Miller
[canohost.c canohost.h channels.c channels.h clientloop.c readconf.c] [readconf.h serverloop.c ssh.c] support remote port forwarding with a zero listen port (-R0:...) to dyamically allocate a listen port at runtime (this is actually specified in rfc4254); bz#1003 ok markus@
2009-01-28 - djm@cvs.openbsd.org 2009/01/22 10:02:34Damien Miller
[clientloop.c misc.c readconf.c readconf.h servconf.c servconf.h] [serverloop.c ssh-keyscan.c ssh.c sshd.c] make a2port() return -1 when it encounters an invalid port number rather than 0, which it will now treat as valid (needed for future work) adjust current consumers of a2port() to check its return value is <= 0, which in turn required some things to be converted from u_short => int make use of int vs. u_short consistent in some other places too feedback & ok markus@
2008-11-23* Backport from upstream CVS (Markus Friedl):Colin Watson
- Only send eow and no-more-sessions requests to openssh 5 and newer; fixes interop problems with broken ssh v2 implementations (closes: #495917).
2008-11-03 - stevesk@cvs.openbsd.org 2008/11/01 17:40:33Damien Miller
[clientloop.c readconf.c readconf.h ssh.c] merge dynamic forward parsing into parse_forward(); 'i think this is OK' djm@
2008-11-03 - jmc@cvs.openbsd.org 2008/10/09 06:54:22Damien Miller
[ssh.c] add -y to usage();
2008-11-03 - djm@cvs.openbsd.org 2008/10/08 23:34:03Damien Miller
[ssh.1 ssh.c] Add -y option to force logging via syslog rather than stderr. Useful for daemonised ssh connection (ssh -f). Patch originally from and ok'd by markus@
2008-11-03 - markus@cvs.openbsd.org 2008/09/11 14:22:37Damien Miller
[compat.c compat.h nchan.c ssh.c] only send eow and no-more-sessions requests to openssh 5 and newer; fixes interop problems with broken ssh v2 implementations; ok djm@
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-21fix segfault when no identity files were suppliedColin Watson
2008-07-04 - djm@cvs.openbsd.org 2008/07/02 13:47:39Darren Tucker
[ssh.1 ssh.c] When forking after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f (similar to bz#92); ok dtucker@
2008-06-13 - dtucker@cvs.openbsd.org 2008/06/12 16:35:31Darren Tucker
[ssh_config.5 ssh.c] keyword expansion for localcommand. ok djm@
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 04:24:06Darren Tucker
[ssh.c] thal shalt not code past the eightieth column
2008-06-13 - djm@cvs.openbsd.org 2008/06/12 04:06:00Darren Tucker
[clientloop.h ssh.c clientloop.c] maintain an ordered queue of outstanding global requests that we expect replies to, similar to the per-channel confirmation queue. Use this queue to verify success or failure for remote forward establishment in a race free way. ok dtucker@
2008-06-11 - djm@cvs.openbsd.org 2008/06/10 22:15:23Darren Tucker
[PROTOCOL ssh.c serverloop.c] Add a no-more-sessions@openssh.com global request extension that the client sends when it knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session. Why would a non-multiplexing client ever issue additional session requests? It could have been attacked with something like SSH'jack: http://www.storm.net.nz/projects/7 feedback & ok markus
2008-06-02Check compromised key blacklist in ssh or ssh-add, as well as in theColin Watson
server (LP: #232391). To override the blacklist check in ssh temporarily, use 'ssh -o UseBlacklistedKeys=yes'; there is no override for the blacklist check in ssh-add.
2008-05-19 - djm@cvs.openbsd.org 2008/05/09 14:26:08Damien Miller
[ssh.c] dingo stole my diff hunk
2008-05-19 - djm@cvs.openbsd.org 2008/05/09 14:18:44Damien Miller
[clientloop.c clientloop.h ssh.c mux.c] tidy up session multiplexing code, moving it into its own file and making the function names more consistent - making ssh.c and clientloop.c a fair bit more readable. ok markus@
2008-05-19 - djm@cvs.openbsd.org 2008/05/08 13:06:11Damien Miller
[clientloop.c clientloop.h ssh.c] Use new channel status confirmation callback system to properly deal with "important" channel requests that fail, in particular command exec, shell and subsystem requests. Previously we would optimistically assume that the requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of fds) or were unimplemented by the server (bz #1384) Also, properly report failing multiplex channel requests via the mux client stderr (subject to LogLevel in the mux master) - better than silently failing. most bits ok markus@ (as part of a larger diff)
2008-05-19 - djm@cvs.openbsd.org 2008/05/08 12:02:23Damien Miller
[auth-options.c auth1.c channels.c channels.h clientloop.c gss-serv.c] [monitor.c monitor_wrap.c nchan.c servconf.c serverloop.c session.c] [ssh.c sshd.c] Implement a channel success/failure status confirmation callback mechanism. Each channel maintains a queue of callbacks, which will be drained in order (RFC4253 guarantees confirm messages are not reordered within an channel). Also includes a abandonment callback to clean up if a channel is closed without sending confirmation messages. This probably shouldn't happen in compliant implementations, but it could be abused to leak memory. ok markus@ (as part of a larger diff)
2008-02-28 - (dtucker) [includes.h ssh-add.c ssh-agent.c ssh-keygen.c ssh.c sshd.cDarren Tucker
openbsd-compat/openssl-compat.{c,h}] Bug #1437 Move the OpenSSL compat header to after OpenSSL headers, since some versions of OpenSSL have SSLeay_add_all_algorithms as a macro already.
2008-02-10 - djm@cvs.openbsd.org 2008/01/19 20:51:26Damien Miller
[ssh.c] ignore SIGPIPE in multiplex client mode - we can receive this if the server runs out of fds on us midway. Report and patch from gregory_shively AT fanniemae.com
2007-12-24* New upstream release (closes: #453367).Colin Watson
- CVE-2007-4752: Prevent ssh(1) from using a trusted X11 cookie if creation of an untrusted cookie fails; found and fixed by Jan Pechanec (closes: #444738). - sshd(8) in new installations defaults to SSH Protocol 2 only. Existing installations are unchanged. - The SSH channel window size has been increased, and both ssh(1) sshd(8) now send window updates more aggressively. These improves performance on high-BDP (Bandwidth Delay Product) networks. - ssh(1) and sshd(8) now preserve MAC contexts between packets, which saves 2 hash calls per packet and results in 12-16% speedup for arcfour256/hmac-md5. - A new MAC algorithm has been added, UMAC-64 (RFC4418) as "umac-64@openssh.com". UMAC-64 has been measured to be approximately 20% faster than HMAC-MD5. - Failure to establish a ssh(1) TunnelForward is now treated as a fatal error when the ExitOnForwardFailure option is set. - ssh(1) returns a sensible exit status if the control master goes away without passing the full exit status. - When using a ProxyCommand in ssh(1), set the outgoing hostname with gethostname(2), allowing hostbased authentication to work. - Make scp(1) skip FIFOs rather than hanging (closes: #246774). - Encode non-printing characters in scp(1) filenames. These could cause copies to be aborted with a "protocol error". - Handle SIGINT in sshd(8) privilege separation child process to ensure that wtmp and lastlog records are correctly updated. - Report GSSAPI mechanism in errors, for libraries that support multiple mechanisms. - Improve documentation for ssh-add(1)'s -d option. - Rearrange and tidy GSSAPI code, removing server-only code being linked into the client. - Delay execution of ssh(1)'s LocalCommand until after all forwardings have been established. - In scp(1), do not truncate non-regular files. - Improve exit message from ControlMaster clients. - Prevent sftp-server(8) from reading until it runs out of buffer space, whereupon it would exit with a fatal error (closes: #365541). - pam_end() was not being called if authentication failed (closes: #405041). - Manual page datestamps updated (closes: #433181).
2007-12-02 - deraadt@cvs.openbsd.org 2007/11/03 02:03:49Darren Tucker
[ssh.c] avoid errno trashing in signal handler; ok dtucker
2007-12-02 - dtucker@cvs.openbsd.org 2007/11/03 02:00:32Darren Tucker
[ssh.c] Use xstrdup/xfree when saving pwname and pwdir; ok deraadt@
2007-12-02 - deraadt@cvs.openbsd.org 2007/11/03 01:24:06Darren Tucker
[ssh.c] bz #1377: getpwuid results were being clobbered by another getpw* call inside tilde_expand_filename(); save the data we need carefully ok djm
2007-12-02 - dtucker@cvs.openbsd.org 2007/10/29 06:54:50Darren Tucker
[ssh.c] Make LocalCommand work for Protocol 1 too; ok djm@
2007-12-02 - dtucker@cvs.openbsd.org 2007/10/29 01:55:04Darren Tucker
[ssh.c] Plug tiny mem leaks in ControlPath and ProxyCommand option processing; ok djm@
2007-09-17 - djm@cvs.openbsd.org 2007/09/04 11:15:56Damien Miller
[ssh.c sshconnect.c sshconnect.h] make ssh(1)'s ConnectTimeout option apply to both the TCP connection and SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand; feedback and "looks ok" markus@
2007-09-17 - djm@cvs.openbsd.org 2007/09/04 03:21:03Damien Miller
[clientloop.c monitor.c monitor_fdpass.c monitor_fdpass.h] [monitor_wrap.c ssh.c] make file descriptor passing code return an error rather than call fatal() when it encounters problems, and use this to make session multiplexing masters survive slaves failing to pass all stdio FDs; ok markus@
2007-08-08 - djm@cvs.openbsd.org 2007/08/07 07:32:53Damien Miller
[clientloop.c clientloop.h ssh.c] bz#1232: ensure that any specified LocalCommand is executed after the tunnel device is opened. Also, make failures to open a tunnel device fatal when ExitOnForwardFailure is active. Reported by h.goebel AT goebel-consult.de; ok dtucker markus reyk deraadt
2007-06-25 - djm@cvs.openbsd.org 2007/06/14 22:48:05Darren Tucker
[ssh.c] when waiting for the multiplex exit status, read until the master end writes an entire int of data *and* closes the client_fd; fixes mux regression spotted by dtucker, ok dtucker@
2007-06-25 - djm@cvs.openbsd.org 2007/06/14 21:43:25Darren Tucker
[ssh.c] handle EINTR when waiting for mux exit status properly
2007-06-13* Suppress "Connection to <host> closed" and "Connection to master closed"Colin Watson
messages at loglevel SILENT (thanks, Jaap Eldering; closes: #409788). * Suppress "Pseudo-terminal will not be allocated because stdin is not a terminal" message at loglevels QUIET and SILENT (closes: #366814).
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2007-06-12 - djm@cvs.openbsd.org 2007/06/12 11:45:27Darren Tucker
[ssh.c] improved exit message from multiplex slave sessions; bz #1262 reported by alexandre.nunes AT gmail.com; ok dtucker@
2007-06-12 - djm@cvs.openbsd.org 2007/06/12 11:15:17Darren Tucker
[ssh.c ssh.1] Add "-K" flag for ssh to set GSSAPIAuthentication=yes and GSSAPIDelegateCredentials=yes. This is symmetric with -k (disable GSSAPI) and is useful for hosts with /home on Kerberised NFS; bz #1312 patch from Markus.Kuhn AT cl.cam.ac.uk; ok dtucker@ markus@
2007-06-12 - djm@cvs.openbsd.org 2007/06/12 11:11:08Darren Tucker
[ssh.c] fix slave exit value when a control master goes away without passing the full exit status by ensuring that the slave reads a full int. bz#1261 reported by frekko AT gmail.com; ok markus@ dtucker@
2007-01-05 - stevesk@cvs.openbsd.org 2007/01/03 03:01:40Damien Miller
[auth2-chall.c channels.c dns.c sftp.c ssh-keygen.c ssh.c] spaces
2006-12-06* Add ssh -K option, the converse of -k, to enable GSSAPI credentialColin Watson
delegation (closes: #401483).
2006-10-24 - djm@cvs.openbsd.org 2006/10/06 02:29:19Damien Miller
[ssh-agent.c ssh-keyscan.c ssh.c] sys/resource.h needs sys/time.h; prompted by brad@ (NB. Id sync only for portable)
2006-09-02 - (dtucker) [ssh-keyscan.c ssh-rand-helper.c ssh.c sshconnect.cDarren Tucker
openbsd-compat/bindresvport.c openbsd-compat/getrrsetbyname.c openbsd-compat/port-tun.c openbsd-compat/rresvport.c] Include <arpa/inet.h> for hton* and ntoh* macros. Required on (at least) HP-UX since we define _XOPEN_SOURCE_EXTENDED. Found by santhi.amirta at gmail com.
2006-09-01 - (djm) [audit-bsm.c audit.c auth-bsdauth.c auth-chall.c auth-pam.c]Damien Miller
[auth-rsa.c auth-shadow.c auth-sia.c auth1.c auth2-chall.c] [auth2-gss.c auth2-kbdint.c auth2-none.c authfd.c authfile.c] [cipher-3des1.c cipher-aes.c cipher-bf1.c cipher-ctr.c clientloop.c] [dh.c dns.c entropy.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c loginrec.c mac.c] [md5crypt.c monitor.c monitor_wrap.c readconf.c rsa.c] [scard-opensc.c scard.c session.c ssh-add.c ssh-agent.c ssh-dss.c] [ssh-keygen.c ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c rc4.diff] [openbsd-compat/bsd-cray.c openbsd-compat/port-aix.c] [openbsd-compat/port-linux.c openbsd-compat/port-solaris.c] [openbsd-compat/port-uw.c] Lots of headers for SCO OSR6, mainly adding stdarg.h for log.h; compile problems reported by rac AT tenzing.org
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:36:12Damien Miller
[authfile.c channels.c progressmeter.c scard.c servconf.c ssh.c] clean extra spaces
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h
2006-08-05 - stevesk@cvs.openbsd.org 2006/07/26 13:57:17Damien Miller
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c] [hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c] [scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c] [sshconnect1.c sshd.c xmalloc.c] move #include <stdlib.h> out of includes.h
2006-07-24 - (djm) [acss.c auth-krb5.c auth-options.c auth-pam.c auth-shadow.c]Damien Miller
[canohost.c channels.c cipher-acss.c defines.h dns.c gss-genr.c] [gss-serv-krb5.c gss-serv.c log.h loginrec.c logintest.c readconf.c] [servconf.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rand-helper.c] [ssh.c sshconnect.c sshd.c openbsd-compat/bindresvport.c] [openbsd-compat/bsd-arc4random.c openbsd-compat/bsd-misc.c] [openbsd-compat/getrrsetbyname.c openbsd-compat/glob.c] [openbsd-compat/mktemp.c openbsd-compat/port-linux.c] [openbsd-compat/port-tun.c openbsd-compat/readpassphrase.c] [openbsd-compat/setproctitle.c openbsd-compat/xmmap.c] make the portable tree compile again - sprinkle unistd.h and string.h back in. Don't redefine __unused, as it turned out to be used in headers on Linux, and replace its use in auth-pam.c with ARGSUSED
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/22 20:48:23Damien Miller
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c] [auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c] [authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c] [cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c] [compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c] [includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c] [progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c] move #include <string.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/17 01:31:10Damien Miller
[authfd.c authfile.c channels.c cleanup.c clientloop.c groupaccess.c] [includes.h log.c misc.c msg.c packet.c progressmeter.c readconf.c] [readpass.c scp.c servconf.c sftp-client.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c] [sshconnect.c sshlogin.c sshpty.c uidswap.c] move #include <unistd.h> out of includes.h