Age | Commit message (Collapse) | Author |
|
|
|
<drankin@bohemians.lexington.ky.us>
|
|
- [sshd.c sshd.8 sshconnect.c ssh.h ssh.c servconf.h servconf.c scp.1]
[scp.c packet.h packet.c login.c log.c canohost.c channels.c]
[hostfile.c sshd_config]
ipv6 support: mostly gethostbyname->getaddrinfo/getnameinfo, new
features: sshd allows multiple ListenAddress and Port options. note
that libwrap is not IPv6-ready. (based on patches from
fujiwara@rcac.tdi.co.jp)
- [ssh.c canohost.c]
more hints (hints.ai_socktype=SOCK_STREAM) for getaddrinfo,
from itojun@
- [channels.c]
listen on _all_ interfaces for X11-Fwd (hints.ai_flags = AI_PASSIVE)
- [packet.h]
allow auth-kerberos for IPv4 only
- [scp.1 sshd.8 servconf.h scp.c]
document -4, -6, and 'ssh -L 2022/::1/22'
- [ssh.c]
'ssh @host' is illegal (null user name), from
karsten@gedankenpolizei.de
- [sshconnect.c]
better error message
- [sshd.c]
allow auth-kerberos for IPv4 only
- Big IPv6 merge:
- Cleanup overrun in sockaddr copying on RHL 6.1
- Replacements for getaddrinfo, getnameinfo, etc based on versions
from patch from KIKUCHI Takahiro <kick@kyoto.wide.ad.jp>
- Replacement for missing structures on systems that lack IPv6
- record_login needed to know about AF_INET6 addresses
- Borrowed more code from OpenBSD: rresvport_af and requisites
|
|
<drankin@bohemians.lexington.ky.us>
- Updated documentation with ./configure options
|
|
cleaned up sshd.c up significantly.
- Several other cleanups
|
|
<pope@netguide.dk>
|
|
- [canohost.c]
fix get_remote_port() and friends for sshd -i;
Holger.Trapp@Informatik.TU-Chemnitz.DE
- [mpaux.c]
make code simpler. no need for memcpy. niels@ ok
- [pty.c]
namebuflen not sizeof namebuflen; bnd@ep-ag.com via djm@mindrot.org
fix proto; markus
- [ssh.1]
typo; mark.baushke@solipsa.com
- [channels.c ssh.c ssh.h sshd.c]
type conflict for 'extern Type *options' in channels.c; dot@dotat.at
- [sshconnect.c]
move checking of hostkey into own function.
- [version.h]
OpenSSH-1.2.1
|
|
- [atomicio.c authfd.c scp.c serverloop.c ssh.h sshconnect.c sshd.c]
move atomicio into it's own file. wrap all socket write()s which
were doing write(sock, buf, len) != len, with atomicio() calls.
- [auth-skey.c]
fd leak
- [authfile.c]
properly name fd variable
- [channels.c]
display great hatred towards strcpy
- [pty.c pty.h sshd.c]
use openpty() if it exists (it does on BSD4_4)
- [tildexpand.c]
check for ~ expansion past MAXPATHLEN
- Modified helper.c to use new atomicio function.
- Reformat Makefile a little
- Moved RC4 routines from rc4.[ch] into helper.c
- Added autoconf code to detect /dev/ptmx (Solaris) and /dev/ptc (AIX)
|
|
|
|
- [auth-krb4.c auth-passwd.c auth-skey.c ssh.
move skey-auth from auth-passwd.c to auth-s
- [auth-rsa.c]
warn only about mismatch if key is _used_
warn about keysize-mismatch with log() not
channels.c readconf.c readconf.h ssh.c ssh.
ports are u_short
- [hostfile.c]
indent, shorter warning
- [nchan.c]
use error() for internal errors
- [packet.c]
set loglevel for SSH_MSG_DISCONNECT to log(
serverloop.c
indent
- [ssh-add.1 ssh-add.c ssh.h]
document , reasonable default
- [ssh.1]
CheckHostIP is not available for connects v
- [sshconnect.c]
typo
easier to read client code for passwd and s
turn of checkhostip for proxy connects, sin
|
|
- Merged OpenBSD CVS changes:
- [channels.c]
report from mrwizard@psu.edu via djm@ibs.com.au
- [channels.c]
set SO_REUSEADDR and SO_LINGER for forwarded ports.
chip@valinux.com via damien@ibs.com.au
- [nchan.c]
it's not an error() if shutdown_write failes in nchan.
- [readconf.c]
remove dead #ifdef-0-code
- [readconf.c servconf.c]
strcasecmp instead of tolower
- [scp.c]
progress meter overflow fix from damien@ibs.com.au
- [ssh-add.1 ssh-add.c]
SSH_ASKPASS support
- [ssh.1 ssh.c]
postpone fork_after_authentication until command execution,
request/patch from jahakala@cc.jyu.fi via damien@ibs.com.au
plus: use daemon() for backgrounding
|
|
- OpenBSD CVS updates
- [channels.c cipher.c compat.c log-client.c scp.c serverloop.c]
[ssh.h sshd.8 sshd.c]
syslog changes:
* Unified Logmessage for all auth-types, for success and for failed
* Standard connections get only ONE line in the LOG when level==LOG:
Auth-attempts are logged only, if authentication is:
a) successfull or
b) with passwd or
c) we had more than AUTH_FAIL_LOG failues
* many log() became verbose()
* old behaviour with level=VERBOSE
- [readconf.c readconf.h ssh.1 ssh.h sshconnect.c sshd.c]
tranfer s/key challenge/response data in SSH_SMSG_AUTH_TIS_CHALLENGE
messages. allows use of s/key in windows (ttssh, securecrt) and
ssh-1.2.27 clients without 'ssh -v', ok: niels@
- [sshd.8]
-V, for fallback to openssh in SSH2 compatibility mode
- [sshd.c]
fix sigchld race; cjc5@po.cwru.edu
|
|
- [channels.c]
make this compile, bad markus
- [log.c readconf.c servconf.c ssh.h]
bugfix: loglevels are per host in clientconfig,
factor out common log-level parsing code.
- [servconf.c]
remove unused index (-Wall)
- [ssh-agent.c]
only one 'extern char *__progname'
- [sshd.8]
document SIGHUP, -Q to synopsis
- [sshconnect.c serverloop.c sshd.c packet.c packet.h]
[channels.c clientloop.c]
SSH_CMSG_MAX_PACKET_SIZE, some clients use this, some need this, niels@
[hope this time my ISP stays alive during commit]
|
|
- [auth-rh-rsa.c auth-rsa.c authfd.c authfd.h hostfile.c mpaux.c]
[mpaux.h ssh-add.c ssh-agent.c ssh.h ssh.c sshd.c]
the keysize of rsa-parameter 'n' is passed implizit,
a few more checks and warnings about 'pretended' keysizes.
- [cipher.c cipher.h packet.c packet.h sshd.c]
remove support for cipher RC4
- [ssh.c]
a note for legay systems about secuity issues with permanently_set_uid(),
the private hostkey and ptrace()
- [sshconnect.c]
more detailed messages about adding and checking hostkeys
|
|
- [auth-rh-rsa.c auth-rhosts.c auth-rsa.c channels.c clientloop.c]
[ssh.c ssh.h sshconnect.c sshd.c]
make all access to options via 'extern Options options'
and 'extern ServerOptions options' respectively;
options are no longer passed as arguments:
* make options handling more consistent
* remove #include "readconf.h" from ssh.h
* readconf.h is only included if necessary
- [mpaux.c] clear temp buffer
- [servconf.c] print _all_ bad options found in configfile
|
|
- [sshd.c] session_key_int may be zero
- [auth-rh-rsa.c servconf.c servconf.h ssh.h sshd.8 sshd.c sshd_config]
IgnoreUserKnownHosts(default=no), used for RhostRSAAuth, ok
deraadt,millert
- Brought default sshd_config more in line with OpenBSDs
|
|
- [auth-krb4.c auth-passwd.c] remove x11- and krb-cleanup from fatal()
+ krb-cleanup cleanup
- [clientloop.c log-client.c log-server.c ]
[readconf.c readconf.h servconf.c servconf.h ]
[ssh.1 ssh.c ssh.h sshd.8]
add LogLevel {QUIET, FATAL, ERROR, INFO, CHAT, DEBUG} to ssh/sshd,
obsoletes QuietMode and FascistLogging in sshd.
|
|
- Merged several minor fixed:
- ssh-agent commandline parsing
- RPM spec file now installs ssh setuid root
- Makefile creates libdir
- Merged beginnings of Solaris compability from Marc G. Fournier
<marc.fournier@acadiau.ca>
|
|
- Fixed location of ssh-askpass to follow autoconf
- Integrated Makefile patch from Niels Kristian Bech Jensen <nkbj@image.dk>
- Autodetection of RSAref library for US users
- Minor doc updates
|
|
|
|
- Removed lots of unnecessary checks from autoconf
- Added support and autoconf test for openpty() function (Unix98 pty support)
- Fix for scp not finding ssh if not installed as /usr/bin/ssh
- Added TODO file
- Merged parts of Debian patch From Phil Hands <phil@hands.com>:
- Added ssh-askpass program
- Added ssh-askpass support to ssh-add.c
- Create symlinks for slogin on install
- Fix "distclean" target in makefile
- Added example for ssh-agent to manpage
- Added support for PAM_TEXT_INFO messages
- Disable internal /etc/nologin support if PAM enabled
- Merged latest OpenBSD CVS changes:
- [sshd.c] don't send fail-msg but disconnect if too many authentication
failures
- [sshd.c] replace assert() with error, fatal or packet_disconnect
- [sshd.c] remove unused argument. ok dugsong
- [sshd.c] typo
- [rsa.c] clear buffers used for encryption. ok: niels
- [rsa.c] replace assert() with error, fatal or packet_disconnect
- Fixed coredump after merge of OpenBSD rsa.c patch
|
|
Picked up lost bit of OpenBSD update to ssh.h
Fix compile warning in new pam_env stuff
|
|
|
|
Add symlinks back to ssh in RPM spec file
|
|
- Build fixes
- Autoconf
- Change binary names to open*
- Fixed autoconf script to detect PAM on RH6.1
- Added tests for libpwdb, and OpenBSD functions to autoconf (not used yet)
|
|
|