summaryrefslogtreecommitdiff
path: root/ssh_config.5
AgeCommit message (Collapse)Author
2018-04-10upstream: lots of typos in comments/docs. Patch from Karsten Weissdjm@openbsd.org
after checking with codespell tool (https://github.com/lucasdemarchi/codespell) OpenBSD-Commit-ID: 373222f12d7ab606598a2d36840c60be93568528
2018-04-10upstream: tweak previous;jmc@openbsd.org
OpenBSD-Commit-ID: 38e347b6f8e888f5e0700d01abb1eba7caa154f9
2018-04-06upstream: Allow "SendEnv -PATTERN" to clear environment variablesdjm@openbsd.org
previously labeled for sendind. bz#1285 ok dtucker@ OpenBSD-Commit-ID: f6fec9e3d0f366f15903094fbe1754cb359a0df9
2018-04-06upstream: We don't offer CBC cipher by default any more. Spotted bydjm@openbsd.org
Renaud Allard (via otto@) OpenBSD-Commit-ID: a559b1eef741557dd959ae378b665a2977d92dca
2018-04-06upstream: Update default IPQoS in ssh(1), sshd(8) to DSCP AF21 forjob@openbsd.org
interactive and CS1 for bulk AF21 was selected as this is the highest priority within the low-latency service class (and it is higher than what we have today). SSH is elastic and time-sensitive data, where a user is waiting for a response via the network in order to continue with a task at hand. As such, these flows should be considered foreground traffic, with delays or drops to such traffic directly impacting user-productivity. For bulk SSH traffic, the CS1 "Lower Effort" marker was chosen to enable networks implementing a scavanger/lower-than-best effort class to discriminate scp(1) below normal activities, such as web surfing. In general this type of bulk SSH traffic is a background activity. An advantage of using "AF21" for interactive SSH and "CS1" for bulk SSH is that they are recognisable values on all common platforms (IANA https://www.iana.org/assignments/dscp-registry/dscp-registry.xml), and for AF21 specifically a definition of the intended behavior exists https://tools.ietf.org/html/rfc4594#section-4.7 in addition to the definition of the Assured Forwarding PHB group https://tools.ietf.org/html/rfc2597, and for CS1 (Lower Effort) there is https://tools.ietf.org/html/rfc3662 The first three bits of "AF21" map to the equivalent IEEEE 802.1D PCP, IEEE 802.11e, MPLS EXP/CoS and IP Precedence value of 2 (also known as "Immediate", or "AC_BE"), and CS1's first 3 bits map to IEEEE 802.1D PCP, IEEE 802.11e, MPLS/CoS and IP Precedence value 1 ("Background" or "AC_BK"). OK deraadt@, "no objection" djm@ OpenBSD-Commit-ID: d11d2a4484f461524ef0c20870523dfcdeb52181
2018-02-26upstream: some cleanup for BindInterface and ssh-keyscan;jmc@openbsd.org
OpenBSD-Commit-ID: 1a719ebeae22a166adf05bea5009add7075acc8c
2018-02-23upstream: Add BindInterface ssh_config directive and -Bdjm@openbsd.org
command-line argument to ssh(1) that directs it to bind its outgoing connection to the address of the specified network interface. BindInterface prefers to use addresses that aren't loopback or link- local, but will fall back to those if no other addresses of the required family are available on that interface. Based on patch by Mike Manning in bz#2820, ok dtucker@ OpenBSD-Commit-ID: c5064d285c2851f773dd736a2c342aa384fbf713
2018-02-16upstream: Mention recent DH KEX methods:djm@openbsd.org
diffie-hellman-group14-sha256 diffie-hellman-group16-sha512 diffie-hellman-group18-sha512 From Jakub Jelen via bz#2826 OpenBSD-Commit-ID: 51bf769f06e55447f4bfa7306949e62d2401907a
2018-02-10upstream commitdjm@openbsd.org
Mention ServerAliveTimeout in context of TCPKeepAlives; prompted by Christoph Anton Mitterer via github OpenBSD-Commit-ID: f0cf1b5bd3f1fbf41d71c88d75d93afc1c880ca2
2018-02-10upstream commitdjm@openbsd.org
Shorter, more accurate explanation of NoHostAuthenticationForLocalhost without the confusing example. Prompted by Christoph Anton Mitterer via github and bz#2293. OpenBSD-Commit-ID: 19dc96bea25b80d78d416b581fb8506f1e7b76df
2018-02-07upstream commitdtucker@openbsd.org
Replace "trojan horse" with the correct term (MITM). From maikel at predikkta.com via bz#2822, ok markus@ OpenBSD-Commit-ID: e86ac64c512057c89edfadb43302ac0aa81a6c53
2017-10-25upstream commitjmc@openbsd.org
tweak previous; ok djm Upstream-ID: 7d913981ab315296be1f759c67b6e17aea38fca9
2017-10-23upstream commitdjm@openbsd.org
Expose devices allocated for tun/tap forwarding. At the client, the device may be obtained from a new %T expansion for LocalCommand. At the server, the allocated devices will be listed in a SSH_TUNNEL variable exposed to the environment of any user sessions started after the tunnel forwarding was established. ok markus Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
2017-10-23upstream commitmillert@openbsd.org
Add URI support to ssh, sftp and scp. For example ssh://user@host or sftp://user@host/path. The connection parameters described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since the ssh fingerprint format in the draft uses md5 with no way to specify the hash function type. OK djm@ Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
2017-10-20upstream commitjmc@openbsd.org
remove unused Pp; Upstream-ID: 8ad26467f1f6a40be887234085a8e01a61a00550
2017-10-20upstream commitdjm@openbsd.org
In the description of pattern-lists, clarify negated matches by explicitly stating that a negated match will never yield a positive result, and that at least one positive term in the pattern-list must match. bz#1918 Upstream-ID: 652d2f9d993f158fc5f83cef4a95cd9d95ae6a14
2017-10-20upstream commitjmc@openbsd.org
%C is hashed; from klemens nanni ok markus Upstream-ID: 6ebed7b2e1b6ee5402a67875d74f5e2859d8f998
2017-09-22upstream commitmarkus@openbsd.org
Add 'reverse' dynamic forwarding which combines dynamic forwarding (-D) with remote forwarding (-R) where the remote-forwarded port expects SOCKS-requests. The SSH server code is unchanged and the parsing happens at the SSH clients side. Thus the full SOCKS-request is sent over the forwarded channel and the client parses c->output. Parsing happens in channel_before_prepare_select(), _before_ the select bitmask is computed in the pre[] handlers, but after network input processing in the post[] handlers. help and ok djm@ Upstream-ID: aa25a6a3851064f34fe719e0bf15656ad5a64b89
2017-09-12upstream commitjmc@openbsd.org
tweak previous; Upstream-ID: bb8cc40b61b15f6a13d81da465ac5bfc65cbfc4b
2017-09-04upstream commitdjm@openbsd.org
Expand ssh_config's StrictModes option with two new settings: StrictModes=accept-new will automatically accept hitherto-unseen keys but will refuse connections for changed or invalid hostkeys. StrictModes=off is the same as StrictModes=no Motivation: StrictModes=no combines two behaviours for host key processing: automatically learning new hostkeys and continuing to connect to hosts with invalid/changed hostkeys. The latter behaviour is quite dangerous since it removes most of the protections the SSH protocol is supposed to provide. Quite a few users want to automatically learn hostkeys however, so this makes that feature available with less danger. At some point in the future, StrictModes=no will change to be a synonym for accept-new, with its current behaviour remaining available via StrictModes=off. bz#2400, suggested by Michael Samuel; ok markus Upstream-ID: 0f55502bf75fc93a74fb9853264a8276b9680b64
2017-07-24upstream commitdjm@openbsd.org
Allow IPQoS=none in ssh/sshd to not set an explicit ToS/DSCP value and just use the operating system default; ok dtucker@ Upstream-ID: 77906ff8c7b660b02ba7cb1e47b17d66f54f1f7e
2017-07-21upstream commitjmc@openbsd.org
man pages with pseudo synopses which list filenames end up creating very ugly output in man -k; after some discussion with ingo, we feel the simplest fix is to remove such SYNOPSIS sections: the info is hardly helpful at page top, is contained already in FILES, and there are sufficiently few that just zapping them is simple; ok schwarze, who also helpfully ran things through a build to check output; Upstream-ID: 3e211b99457e2f4c925c5927d608e6f97431336c
2017-06-24upstream commitdjm@openbsd.org
use HostKeyAlias if specified instead of hostname for matching host certificate principal names; bz#2728; ok dtucker@ Upstream-ID: dc2e11c83ae9201bbe74872a0c895ae9725536dd
2017-05-31upstream commitjmc@openbsd.org
tweak previous; Upstream-ID: 66987651046c42d142f7318c9695fb81a6d14031
2017-05-31upstream commitbluhm@openbsd.org
Add RemoteCommand option to specify a command in the ssh config file instead of giving it on the client's command line. This command will be executed on the remote host. The feature allows to automate tasks using ssh config. OK markus@ Upstream-ID: 5d982fc17adea373a9c68cae1021ce0a0904a5ee
2017-05-08upstream commitdjm@openbsd.org
As promised in last release announcement: remove support for Blowfish, RC4 and CAST ciphers. ok markus@ deraadt@ Upstream-ID: 21f8facdba3fd8da248df6417000867cec6ba222
2017-05-08upstream commitnaddy@openbsd.org
restore mistakenly deleted description of the ConnectionAttempts option ok markus@ Upstream-ID: 943002b1b7c470caea3253ba7b7348c359de0348
2017-05-08upstream commitnaddy@openbsd.org
remove miscellaneous SSH1 leftovers; ok markus@ Upstream-ID: af23696022ae4d45a1abc2fb8b490d8d9dd63b7c
2017-05-01upstream commitdjm@openbsd.org
remove SSHv1 configuration options and man pages bits ok markus@ Upstream-ID: 84638c23546c056727b7a7d653c72574e0f19424
2017-05-01upstream commitjmc@openbsd.org
sort; Upstream-ID: 7e6b56e52b039cf44d0418e9de9aca20a2d2d15a
2017-04-28upstream commitdtucker@openbsd.org
Add SyslogFacility option to ssh(1) matching the equivalent option in sshd(8). bz#2705, patch from erahn at arista.com, ok djm@ Upstream-ID: d5115c2c0193ceb056ed857813b2a7222abda9ed
2017-02-28upstream commitjmc@openbsd.org
errant dot; from klemens nanni Upstream-ID: 83d93366a5acf47047298c5d3ebc5e7426f37921
2017-02-04upstream commitdjm@openbsd.org
support =- for removing methods from algorithms lists, e.g. Ciphers=-*cbc; suggested by Cristian Ionescu-Idbohrn in bz#2671 "I like it" markus@ Upstream-ID: c78c38f9f81a963b33d0eade559f6048add24a6d
2016-10-19upstream commitjmc@openbsd.org
various formatting fixes, specifically removing Dq; Upstream-ID: 81e85df2b8e474f5f93d66e61d9a4419ce87347c
2016-09-29upstream commitjmc@openbsd.org
use a separate TOKENS section, as we've done for sshd_config(5); help/ok djm Upstream-ID: 640e32b5e4838e4363738cdec955084b3579481d
2016-09-24upstream commitdjm@openbsd.org
mention curve25519-sha256 KEX Upstream-ID: 33ae1f433ce4795ffa6203761fbdf86e0d7ffbaf
2016-09-12upstream commitdjm@openbsd.org
remove 3des-cbc from the client's default proposal; 64-bit block ciphers are not safe in 2016 and we don't want to wait until attacks like sweet32 are extended to SSH. As 3des-cbc was the only mandatory cipher in the SSH RFCs, this may cause problems connecting to older devices using the defaults, but it's highly likely that such devices already need explicit configuration for KEX and hostkeys anyway. ok deraadt, markus, dtucker Upstream-ID: a505dfe65c6733af0f751b64cbc4bb7e0761bc2f
2016-07-23upstream commitdjm@openbsd.org
improve wording; suggested by jmc@ Upstream-ID: 55cb0a24c8e0618b3ceec80998dc82c85db2d2f8
2016-07-22upstream commitdjm@openbsd.org
reverse the order in which -J/JumpHost proxies are visited to be more intuitive and document reported by and manpage bits naddy@ Upstream-ID: 3a68fd6a841fd6cf8cedf6552a9607ba99df179a
2016-07-17upstream commitjmc@openbsd.org
- add proxyjump to the options list - formatting fixes - update usage() ok djm Upstream-ID: 43d318e14ce677a2eec8f21ef5ba2f9f68a59457
2016-07-15upstream commitdjm@openbsd.org
Add a ProxyJump ssh_config(5) option and corresponding -J ssh(1) command-line flag to allow simplified indirection through a SSH bastion or "jump host". These options construct a proxy command that connects to the specified jump host(s) (more than one may be specified) and uses port-forwarding to establish a connection to the next destination. This codifies the safest way of indirecting connections through SSH servers and makes it easy to use. ok markus@ Upstream-ID: fa899cb8b26d889da8f142eb9774c1ea36b04397
2016-05-19upstream commitmarkus@openbsd.org
allow setting IdentityAgent to SSH_AUTH_SOCK; ok djm@ Upstream-ID: 20c508480d8db3eef18942c0fc39b1fcf25652ac
2016-05-05upstream commitmarkus@openbsd.org
IdentityAgent for specifying specific agent sockets; ok djm@ Upstream-ID: 3e6a15eb89ea0fd406f108826b7dc7dec4fbfac1
2016-04-21upstream commitjmc@openbsd.org
tweak previous; Upstream-ID: 46c1bab91c164078edbccd5f7d06b9058edd814f
2016-04-15upstream commitdjm@openbsd.org
Include directive for ssh_config(5); feedback & ok markus@ Upstream-ID: ae3b76e2e343322b9f74acde6f1e1c5f027d5fff
2016-02-23upstream commitsobrado@openbsd.org
AddressFamily defaults to any. ok djm@ Upstream-ID: 0d94aa06a4b889bf57a7f631c45ba36d24c13e0c
2016-02-18upstream commitdjm@openbsd.org
rsa-sha2-512,rsa-sha2-256 cannot be selected explicitly in *KeyTypes options yet. Remove them from the lists of algorithms for now. committing on behalf of markus@ ok djm@ Upstream-ID: c6e8820eb8e610ac21551832c0c89684a9a51bb7
2016-02-18upstream commitjmc@openbsd.org
since these pages now clearly tell folks to avoid v1, normalise the docs from a v2 perspective (i.e. stop pointing out which bits are v2 only); ok/tweaks djm ok markus Upstream-ID: eb474f8c36fb6a532dc05c282f7965e38dcfa129
2016-02-17upstream commitdjm@openbsd.org
Replace list of ciphers and MACs adjacent to -1/-2 flag descriptions in ssh(1) with a strong recommendation not to use protocol 1. Add a similar warning to the Protocol option descriptions in ssh_config(5) and sshd_config(5); prompted by and ok mmcc@ Upstream-ID: 961f99e5437d50e636feca023978950a232ead5e
2016-02-11upstream commitdjm@openbsd.org
sync crypto algorithm lists in ssh_config(5) and sshd_config(5) with current reality. bz#2527 Upstream-ID: d7fd1b6c1ed848d866236bcb1d7049d2bb9b2ff6