Age | Commit message (Collapse) | Author |
|
Allow secure files (~/.ssh/config, ~/.ssh/authorized_keys, etc.) to be
group-writable, provided that the group in question contains only the file's
owner. Rejected upstream for IMO incorrect reasons (e.g. a misunderstanding
about the contents of gr->gr_mem). Given that per-user groups and umask 002
are the default setup in Debian (for good reasons - this makes operating in
setgid directories with other groups much easier), we need to permit this by
default.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1060
Bug-Debian: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=314347
Last-Update: 2017-10-04
Patch-Name: user-group-modes.patch
|
|
Add compatibility aliases for ProtocolKeepAlives and SetupTimeOut, supported
in previous versions of Debian's OpenSSH package but since superseded by
ServerAliveInterval. (We're probably stuck with this bit for
compatibility.)
In batch mode, default ServerAliveInterval to five minutes.
Adjust documentation to match and to give some more advice on use of
keepalives.
Author: Ian Jackson <ian@chiark.greenend.org.uk>
Author: Matthew Vernon <matthew@debian.org>
Author: Colin Watson <cjwatson@debian.org>
Last-Update: 2018-10-19
Patch-Name: keepalive-extensions.patch
|
|
This patch has been rejected upstream: "None of the OpenSSH developers are
in favour of adding this, and this situation has not changed for several
years. This is not a slight on Simon's patch, which is of fine quality, but
just that a) we don't trust GSSAPI implementations that much and b) we don't
like adding new KEX since they are pre-auth attack surface. This one is
particularly scary, since it requires hooks out to typically root-owned
system resources."
However, quite a lot of people rely on this in Debian, and it's better to
have it merged into the main openssh package rather than having separate
-krb5 packages (as we used to have). It seems to have a generally good
security history.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242
Last-Updated: 2018-10-20
Patch-Name: gssapi.patch
|
|
environment variable names as well as explicit paths. ok dtucker@
OpenBSD-Commit-ID: 2f0996e103876c53d8c9dd51dcce9889d700767b
|
|
timeout and allow X11 connections in untrusted mode indefinitely. ok dtucker@
OpenBSD-Commit-ID: ea1ceed3f540b48e5803f933e59a03b20db10c69
|
|
with a ProxyCommand set with regards to hostname canonicalisation (i.e. don't
try to canonicalise the hostname unless CanonicalizeHostname is set to
'always').
Patch from Sven Wegener via bz#2896
OpenBSD-Commit-ID: 527ff501cf98bf65fb4b29ed0cb847dda10f4d37
|
|
various -o lists; ok djm
OpenBSD-Commit-ID: ecb88baecc3c54988b4d1654446ea033da359288
|
|
it to specify which signature algorithms may be used by CAs when signing
certificates. Useful if you want to ban RSA/SHA1; ok markus@
OpenBSD-Commit-ID: 9159e5e9f67504829bf53ff222057307a6e3230f
|
|
Most people will 1) be using modern multi-factor authentication methods
like TOTP/OATH etc and 2) be getting support for multi-factor
authentication via PAM or BSD Auth.
|
|
characters instead the C API in section 3.
OK millert jmc nicm, "the right idea" deraadt
OpenBSD-Commit-ID: a74fd215488c382809e4d041613aeba4a4b1ffc6
|
|
ssh(1) setuid has been removed, remove supporting code and clean up
references to it in the man pages
We have not shipped ssh(1) the setuid bit since 2002. If ayone
really needs to make connections from a low port number this can
be implemented via a small setuid ProxyCommand.
ok markus@ jmc@ djm@
OpenBSD-Commit-ID: d03364610b7123ae4c6792f5274bd147b6de717e
|
|
signature work - returns ability to add/remove/specify algorithms by
wildcard.
Algorithm lists are now fully expanded when the server/client configs
are finalised, so errors are reported early and the config dumps
(e.g. "ssh -G ...") now list the actual algorithms selected.
Clarify that, while wildcards are accepted in algorithm lists, they
aren't full pattern-lists that support negation.
(lots of) feedback, ok markus@
OpenBSD-Commit-ID: a8894c5c81f399a002f02ff4fe6b4fa46b1f3207
|
|
In ssh, when an agent fails to return a RSA-SHA2 signature when
requested and falls back to RSA-SHA1 instead, retry the signature to
ensure that the public key algorithm sent in the SSH_MSG_USERAUTH
matches the one in the signature itself.
In sshd, strictly enforce that the public key algorithm sent in the
SSH_MSG_USERAUTH message matches what appears in the signature.
Make the sshd_config PubkeyAcceptedKeyTypes and
HostbasedAcceptedKeyTypes options control accepted signature algorithms
(previously they selected supported key types). This allows these
options to ban RSA-SHA1 in favour of RSA-SHA2.
Add new signature algorithms "rsa-sha2-256-cert-v01@openssh.com" and
"rsa-sha2-512-cert-v01@openssh.com" to force use of RSA-SHA2 signatures
with certificate keys.
feedback and ok markus@
OpenBSD-Commit-ID: c6e9f6d45eed8962ad502d315d7eaef32c419dde
|
|
OpenBSD-Commit-ID: 27d80d8b8ca99bc33971dee905e8ffd0053ec411
|
|
environment variables for the remote session (subject to the server accepting
them)
refactor SendEnv to remove the arbitrary limit of variable names.
ok markus@
OpenBSD-Commit-ID: cfbb00d9b0e10c1ffff1d83424351fd961d1f2be
|
|
make the grammatical format in sshd_config.5 match that in ssh_config.5;
OpenBSD-Commit-ID: e325663b9342f3d556e223e5306e0d5fa1a74fa0
|
|
username is available currently. In the client this is via %i, in the server
%U (since %i was already used in the client in some places for this, but used
for something different in the server); bz#2870, ok dtucker@
OpenBSD-Commit-ID: c7e912b0213713316cb55db194b3a6415b3d4b95
|
|
after checking with codespell tool
(https://github.com/lucasdemarchi/codespell)
OpenBSD-Commit-ID: 373222f12d7ab606598a2d36840c60be93568528
|
|
OpenBSD-Commit-ID: 38e347b6f8e888f5e0700d01abb1eba7caa154f9
|
|
previously labeled for sendind. bz#1285 ok dtucker@
OpenBSD-Commit-ID: f6fec9e3d0f366f15903094fbe1754cb359a0df9
|
|
Renaud Allard (via otto@)
OpenBSD-Commit-ID: a559b1eef741557dd959ae378b665a2977d92dca
|
|
interactive and CS1 for bulk
AF21 was selected as this is the highest priority within the low-latency
service class (and it is higher than what we have today). SSH is elastic
and time-sensitive data, where a user is waiting for a response via the
network in order to continue with a task at hand. As such, these flows
should be considered foreground traffic, with delays or drops to such
traffic directly impacting user-productivity.
For bulk SSH traffic, the CS1 "Lower Effort" marker was chosen to enable
networks implementing a scavanger/lower-than-best effort class to
discriminate scp(1) below normal activities, such as web surfing. In
general this type of bulk SSH traffic is a background activity.
An advantage of using "AF21" for interactive SSH and "CS1" for bulk SSH
is that they are recognisable values on all common platforms (IANA
https://www.iana.org/assignments/dscp-registry/dscp-registry.xml), and
for AF21 specifically a definition of the intended behavior exists
https://tools.ietf.org/html/rfc4594#section-4.7 in addition to the definition
of the Assured Forwarding PHB group https://tools.ietf.org/html/rfc2597, and
for CS1 (Lower Effort) there is https://tools.ietf.org/html/rfc3662
The first three bits of "AF21" map to the equivalent IEEEE 802.1D PCP, IEEE
802.11e, MPLS EXP/CoS and IP Precedence value of 2 (also known as "Immediate",
or "AC_BE"), and CS1's first 3 bits map to IEEEE 802.1D PCP, IEEE 802.11e,
MPLS/CoS and IP Precedence value 1 ("Background" or "AC_BK").
OK deraadt@, "no objection" djm@
OpenBSD-Commit-ID: d11d2a4484f461524ef0c20870523dfcdeb52181
|
|
OpenBSD-Commit-ID: 1a719ebeae22a166adf05bea5009add7075acc8c
|
|
command-line argument to ssh(1) that directs it to bind its outgoing
connection to the address of the specified network interface.
BindInterface prefers to use addresses that aren't loopback or link-
local, but will fall back to those if no other addresses of the
required family are available on that interface.
Based on patch by Mike Manning in bz#2820, ok dtucker@
OpenBSD-Commit-ID: c5064d285c2851f773dd736a2c342aa384fbf713
|
|
diffie-hellman-group14-sha256
diffie-hellman-group16-sha512
diffie-hellman-group18-sha512
From Jakub Jelen via bz#2826
OpenBSD-Commit-ID: 51bf769f06e55447f4bfa7306949e62d2401907a
|
|
Mention ServerAliveTimeout in context of TCPKeepAlives;
prompted by Christoph Anton Mitterer via github
OpenBSD-Commit-ID: f0cf1b5bd3f1fbf41d71c88d75d93afc1c880ca2
|
|
Shorter, more accurate explanation of
NoHostAuthenticationForLocalhost without the confusing example. Prompted by
Christoph Anton Mitterer via github and bz#2293.
OpenBSD-Commit-ID: 19dc96bea25b80d78d416b581fb8506f1e7b76df
|
|
Replace "trojan horse" with the correct term (MITM).
From maikel at predikkta.com via bz#2822, ok markus@
OpenBSD-Commit-ID: e86ac64c512057c89edfadb43302ac0aa81a6c53
|
|
tweak previous; ok djm
Upstream-ID: 7d913981ab315296be1f759c67b6e17aea38fca9
|
|
Expose devices allocated for tun/tap forwarding.
At the client, the device may be obtained from a new %T expansion
for LocalCommand.
At the server, the allocated devices will be listed in a
SSH_TUNNEL variable exposed to the environment of any user sessions
started after the tunnel forwarding was established.
ok markus
Upstream-ID: e61e53f8ae80566e9ddc0d67a5df5bdf2f3c9f9e
|
|
Add URI support to ssh, sftp and scp. For example
ssh://user@host or sftp://user@host/path. The connection parameters
described in draft-ietf-secsh-scp-sftp-ssh-uri-04 are not implemented since
the ssh fingerprint format in the draft uses md5 with no way to specify the
hash function type. OK djm@
Upstream-ID: 4ba3768b662d6722de59e6ecb00abf2d4bf9cacc
|
|
remove unused Pp;
Upstream-ID: 8ad26467f1f6a40be887234085a8e01a61a00550
|
|
In the description of pattern-lists, clarify negated
matches by explicitly stating that a negated match will never yield a
positive result, and that at least one positive term in the pattern-list must
match. bz#1918
Upstream-ID: 652d2f9d993f158fc5f83cef4a95cd9d95ae6a14
|
|
%C is hashed; from klemens nanni ok markus
Upstream-ID: 6ebed7b2e1b6ee5402a67875d74f5e2859d8f998
|
|
Add 'reverse' dynamic forwarding which combines dynamic
forwarding (-D) with remote forwarding (-R) where the remote-forwarded port
expects SOCKS-requests.
The SSH server code is unchanged and the parsing happens at the SSH
clients side. Thus the full SOCKS-request is sent over the forwarded
channel and the client parses c->output. Parsing happens in
channel_before_prepare_select(), _before_ the select bitmask is
computed in the pre[] handlers, but after network input processing
in the post[] handlers.
help and ok djm@
Upstream-ID: aa25a6a3851064f34fe719e0bf15656ad5a64b89
|
|
tweak previous;
Upstream-ID: bb8cc40b61b15f6a13d81da465ac5bfc65cbfc4b
|
|
Expand ssh_config's StrictModes option with two new
settings:
StrictModes=accept-new will automatically accept hitherto-unseen keys
but will refuse connections for changed or invalid hostkeys.
StrictModes=off is the same as StrictModes=no
Motivation:
StrictModes=no combines two behaviours for host key processing:
automatically learning new hostkeys and continuing to connect to hosts
with invalid/changed hostkeys. The latter behaviour is quite dangerous
since it removes most of the protections the SSH protocol is supposed to
provide.
Quite a few users want to automatically learn hostkeys however, so
this makes that feature available with less danger.
At some point in the future, StrictModes=no will change to be a synonym
for accept-new, with its current behaviour remaining available via
StrictModes=off.
bz#2400, suggested by Michael Samuel; ok markus
Upstream-ID: 0f55502bf75fc93a74fb9853264a8276b9680b64
|
|
Allow IPQoS=none in ssh/sshd to not set an explicit
ToS/DSCP value and just use the operating system default; ok dtucker@
Upstream-ID: 77906ff8c7b660b02ba7cb1e47b17d66f54f1f7e
|
|
man pages with pseudo synopses which list filenames end
up creating very ugly output in man -k; after some discussion with ingo, we
feel the simplest fix is to remove such SYNOPSIS sections: the info is hardly
helpful at page top, is contained already in FILES, and there are
sufficiently few that just zapping them is simple;
ok schwarze, who also helpfully ran things through a build to check
output;
Upstream-ID: 3e211b99457e2f4c925c5927d608e6f97431336c
|
|
use HostKeyAlias if specified instead of hostname for
matching host certificate principal names; bz#2728; ok dtucker@
Upstream-ID: dc2e11c83ae9201bbe74872a0c895ae9725536dd
|
|
tweak previous;
Upstream-ID: 66987651046c42d142f7318c9695fb81a6d14031
|
|
Add RemoteCommand option to specify a command in the
ssh config file instead of giving it on the client's command line. This
command will be executed on the remote host. The feature allows to automate
tasks using ssh config. OK markus@
Upstream-ID: 5d982fc17adea373a9c68cae1021ce0a0904a5ee
|
|
As promised in last release announcement: remove
support for Blowfish, RC4 and CAST ciphers. ok markus@ deraadt@
Upstream-ID: 21f8facdba3fd8da248df6417000867cec6ba222
|
|
restore mistakenly deleted description of the
ConnectionAttempts option ok markus@
Upstream-ID: 943002b1b7c470caea3253ba7b7348c359de0348
|
|
remove miscellaneous SSH1 leftovers; ok markus@
Upstream-ID: af23696022ae4d45a1abc2fb8b490d8d9dd63b7c
|
|
remove SSHv1 configuration options and man pages bits
ok markus@
Upstream-ID: 84638c23546c056727b7a7d653c72574e0f19424
|
|
sort;
Upstream-ID: 7e6b56e52b039cf44d0418e9de9aca20a2d2d15a
|
|
Add SyslogFacility option to ssh(1) matching the
equivalent option in sshd(8). bz#2705, patch from erahn at arista.com, ok
djm@
Upstream-ID: d5115c2c0193ceb056ed857813b2a7222abda9ed
|
|
errant dot; from klemens nanni
Upstream-ID: 83d93366a5acf47047298c5d3ebc5e7426f37921
|
|
support =- for removing methods from algorithms lists,
e.g. Ciphers=-*cbc; suggested by Cristian Ionescu-Idbohrn in bz#2671 "I like
it" markus@
Upstream-ID: c78c38f9f81a963b33d0eade559f6048add24a6d
|