summaryrefslogtreecommitdiff
path: root/ssh_config.5
AgeCommit message (Collapse)Author
2013-08-21 - djm@cvs.openbsd.org 2013/08/20 00:11:38Damien Miller
[readconf.c readconf.h ssh_config.5 sshconnect.c] Add a ssh_config ProxyUseFDPass option that supports the use of ProxyCommands that establish a connection and then pass a connected file descriptor back to ssh(1). This allows the ProxyCommand to exit rather than have to shuffle data back and forth and enables ssh to use getpeername, etc. to obtain address information just like it does with regular directly-connected sockets. ok markus@
2013-07-18 - jmc@cvs.openbsd.org 2013/06/27 14:05:37Damien Miller
[ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5] do not use Sx for sections outwith the man page - ingo informs me that stuff like html will render with broken links; issue reported by Eric S. Raymond, via djm
2013-07-18 - djm@cvs.openbsd.org 2013/06/21 00:37:49Damien Miller
[ssh_config.5] explicitly mention that IdentitiesOnly can be used with IdentityFile to control which keys are offered from an agent.
2013-05-16 - jmc@cvs.openbsd.org 2013/05/16 06:28:45Darren Tucker
[ssh_config.5] put IgnoreUnknown in the right place;
2013-05-16 - djm@cvs.openbsd.org 2013/05/16 04:27:50Darren Tucker
[ssh_config.5 readconf.h readconf.c] add the ability to ignore specific unrecognised ssh_config options; bz#866; ok markus@
2013-05-16 - dtucker@cvs.openbsd.org 2013/05/16 02:00:34Darren Tucker
[ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c ssh_config.5 packet.h] Add an optional second argument to RekeyLimit in the client to allow rekeying based on elapsed time in addition to amount of traffic. with djm@ jmc@, ok djm
2013-01-09 - markus@cvs.openbsd.org 2013/01/08 18:49:04Damien Miller
[PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c] [myproposal.h packet.c ssh_config.5 sshd_config.5] support AES-GCM as defined in RFC 5647 (but with simpler KEX handling) ok and feedback djm@
2012-12-12 - markus@cvs.openbsd.org 2012/12/11 22:31:18Damien Miller
[PROTOCOL authfile.c cipher.c cipher.h kex.h mac.c myproposal.h] [packet.c ssh_config.5 sshd_config.5] add encrypt-then-mac (EtM) modes to openssh by defining new mac algorithms that change the packet format and compute the MAC over the encrypted message (including the packet size) instead of the plaintext data; these EtM modes are considered more secure and used by default. feedback and ok djm@
2012-12-03 - djm@cvs.openbsd.org 2012/12/02 20:26:11Damien Miller
[ssh_config.5 sshconnect2.c] Make IdentitiesOnly apply to keys obtained from a PKCS11Provider. This allows control of which keys are offered from tokens using IdentityFile. ok markus@
2012-10-05 - markus@cvs.openbsd.org 2012/10/04 13:21:50Darren Tucker
[myproposal.h ssh_config.5 umac.h sshd_config.5 ssh.1 sshd.8 mac.c] add umac128 variant; ok djm@ at n2k12 (note: further Makefile work is required)
2012-07-02 - naddy@cvs.openbsd.org 2012/06/29 13:57:25Darren Tucker
[ssh_config.5 sshd_config.5] match the documented MAC order of preference to the actual one; ok dtucker@
2012-06-30 - dtucker@cvs.openbsd.org 2012/06/28 05:07:45Damien Miller
[mac.c myproposal.h ssh_config.5 sshd_config.5] Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed from draft6 of the spec and will not be in the RFC when published. Patch from mdb at juniper net via bz#2023, ok markus.
2012-06-20 - dtucker@cvs.openbsd.org 2012/06/18 11:49:58Damien Miller
[ssh_config.5] RSA instead of DSA twice. From Steve.McClellan at radisys com
2011-09-22 - djm@cvs.openbsd.org 2011/09/09 00:43:00Damien Miller
[ssh_config.5 sshd_config.5] fix typo in IPQoS parsing: there is no "AF14" class, but there is an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
2011-08-06 - djm@cvs.openbsd.org 2011/08/02 01:22:11Damien Miller
[mac.c myproposal.h ssh.1 ssh_config.5 sshd.8 sshd_config.5] Add new SHA256 and SHA512 based HMAC modes from http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt Patch from mdb AT juniper.net; feedback and ok markus@
2011-06-20 - djm@cvs.openbsd.org 2011/06/04 00:10:26Damien Miller
[ssh_config.5] explain IdentifyFile's semantics a little better, prompted by bz#1898 ok dtucker jmc
2011-05-29 - djm@cvs.openbsd.org 2011/05/24 07:15:47Damien Miller
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c] Remove undocumented legacy options UserKnownHostsFile2 and GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile accept multiple paths per line and making their defaults include known_hosts2; ok markus
2011-05-15 - jmc@cvs.openbsd.org 2011/05/07 23:19:39Damien Miller
[ssh_config.5] - tweak previous - come consistency fixes ok djm
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:34:32Damien Miller
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5] Add a RequestTTY ssh_config option to allow configuration-based control over tty allocation (like -t/-T); ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:31:38Damien Miller
[readconf.c ssh_config.5] support negated Host matching, e.g. Host *.example.org !c.example.org User mekmitasdigoat Will match "a.example.org", "b.example.org", but not "c.example.org" ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:18:02Damien Miller
[ssh.c ssh_config.5] add a %L expansion (short-form of the local host name) for ControlPath; sync some more expansions with LocalCommand; ok markus@
2010-12-26 - djm@cvs.openbsd.org 2010/12/08 04:02:47Damien Miller
[ssh_config.5 sshd_config.5] explain that IPQoS arguments are separated by whitespace; iirc requested by jmc@ a while back
2010-12-01 - djm@cvs.openbsd.org 2010/11/29 23:45:51Damien Miller
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c] [sshconnect.h sshconnect2.c] automatically order the hostkeys requested by the client based on which hostkeys are already recorded in known_hosts. This avoids hostkey warnings when connecting to servers with new ECDSA keys that are preferred by default; with markus@
2010-11-20 - jmc@cvs.openbsd.org 2010/11/15 07:40:14Damien Miller
[ssh_config.5] libary -> library;
2010-11-20 - djm@cvs.openbsd.org 2010/11/13 23:27:51Damien Miller
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h] [servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5] allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of hardcoding lowdelay/throughput. bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
2010-11-05 - jmc@cvs.openbsd.org 2010/10/28 18:33:28Damien Miller
[scp.1 ssh-add.1 ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5] knock out some "-*- nroff -*-" lines;
2010-09-24 - jmc@cvs.openbsd.org 2010/09/22 08:30:08Damien Miller
[ssh.1 ssh_config.5] ssh.1: add kexalgorithms to the -o list ssh_config.5: format the kexalgorithms in a more consistent (prettier!) way ok djm
2010-09-24 - djm@cvs.openbsd.org 2010/09/22 05:01:30Damien Miller
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h] [servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5] add a KexAlgorithms knob to the client and server configuration to allow selection of which key exchange methods are used by ssh(1) and sshd(8) and their order of preference. ok markus@
2010-08-31 - djm@cvs.openbsd.org 2010/08/31 11:54:45Damien Miller
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c] [authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c] [monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c] [ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c] [ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h] [ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5] [uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c] Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. Only the mandatory sections of RFC5656 are implemented, specifically the three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and ECDSA. Point compression (optional in RFC5656 is NOT implemented). Certificate host and user keys using the new ECDSA key types are supported. Note that this code has not been tested for interoperability and may be subject to change. feedback and ok markus@
2010-08-05 - djm@cvs.openbsd.org 2010/08/04 05:37:01Damien Miller
[ssh.1 ssh_config.5 sshd.8] Remove mentions of weird "addr/port" alternate address format for IPv6 addresses combinations. It hasn't worked for ages and we have supported the more commen "[addr]:port" format for a long time. ok jmc@ markus@
2010-08-03 - djm@cvs.openbsd.org 2010/07/19 09:15:12Damien Miller
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5] add a "ControlPersist" option that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but further hacked on by wmertens AT cisco.com, apb AT cequrux.com, martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
2010-07-16 - djm@cvs.openbsd.org 2010/07/12 22:41:13Damien Miller
[ssh.c ssh_config.5] expand %h to the hostname in ssh_config Hostname options. While this sounds useless, it is actually handy for working with unqualified hostnames: Host *.* Hostname %h Host * Hostname %h.example.org "I like it" markus@
2010-07-02 - jmc@cvs.openbsd.org 2010/06/26 00:57:07Damien Miller
[ssh_config.5] tweak previous;
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 23:10:30Damien Miller
[ssh.c] log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts; "nice!" markus@
2010-04-18 - OpenBSD CVS SyncDamien Miller
- jmc@cvs.openbsd.org 2010/04/16 06:45:01 [ssh_config.5] tweak previous; ok djm
2010-04-16 - djm@cvs.openbsd.org 2010/04/14 22:27:42Damien Miller
[ssh_config.5 sshconnect.c] expand %r => remote username in ssh_config:ProxyCommand; ok deraadt markus
2010-04-16 - jmc@cvs.openbsd.org 2010/03/27 14:26:55Damien Miller
[ssh_config.5] tweak previous; ok dtucker
2010-03-26 - dtucker@cvs.openbsd.org 2010/03/26 01:06:13Darren Tucker
[ssh_config.5] Reformat default value of PreferredAuthentications entry (current formatting implies ", " is acceptable as a separator, which it's not. ok djm@
2010-03-05 - djm@cvs.openbsd.org 2010/03/05 10:28:21Damien Miller
[ssh-add.1 ssh.1 ssh_config.5] mention loading of certificate files from [private]-cert.pub when they are present; feedback and ok jmc@
2010-02-12 - markus@cvs.openbsd.org 2010/02/10 23:20:38Damien Miller
[ssh-add.1 ssh-keygen.1 ssh.1 ssh_config.5] pkcs#11 is no longer optional; improve wording; ok jmc@
2010-02-12 - markus@cvs.openbsd.org 2010/02/08 10:50:20Damien Miller
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c] [ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5] replace our obsolete smartcard code with PKCS#11. ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11 provider (shared library) while ssh-agent(1) delegates PKCS#11 to a forked a ssh-pkcs11-helper process. PKCS#11 is currently a compile time option. feedback and ok djm@; inspired by patches from Alon Bar-Lev `
2010-01-10 - dtucker@cvs.openbsd.org 2010/01/09 23:04:13Darren Tucker
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c readconf.h scp.1 sftp.1 ssh_config.5 misc.h] Remove RoutingDomain from ssh since it's now not needed. It can be replaced with "route exec" or "nc -V" as a proxycommand. "route exec" also ensures that trafic such as DNS lookups stays withing the specified routingdomain. For example (from reyk): # route -T 2 exec /usr/sbin/sshd or inherited from the parent process $ route -T 2 exec sh $ ssh 10.1.2.3 ok deraadt@ markus@ stevesk@ reyk@
2010-01-08 - jmc@cvs.openbsd.org 2009/12/29 18:03:32Darren Tucker
[sshd_config.5 ssh_config.5] sort previous;
2010-01-08 - stevesk@cvs.openbsd.org 2009/12/29 16:38:41Darren Tucker
[sshd_config.5 readconf.c ssh_config.5 scp.1 servconf.c sftp.1 ssh.1] Rename RDomain config option to RoutingDomain to be more clear and consistent with other options. NOTE: if you currently use RDomain in the ssh client or server config, or ssh/sshd -o, you must update to use RoutingDomain. ok markus@ djm@
2010-01-08 - djm@cvs.openbsd.org 2009/11/10 02:56:22Darren Tucker
[ssh_config.5] explain the constraints on LocalCommand some more so people don't try to abuse it.
2010-01-08 - reyk@cvs.openbsd.org 2009/10/28 16:38:18Darren Tucker
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1 sftp.1 sshd_config.5 readconf.c ssh.c misc.c] Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan. ok markus@
2009-10-11 - jmc@cvs.openbsd.org 2009/10/08 20:42:12Darren Tucker
[sshd_config.5 ssh_config.5 sshd.8 ssh.1] some tweaks now that protocol 1 is not offered by default; ok markus
2009-10-11 - (dtucker) OpenBSD CVS SyncDarren Tucker
- markus@cvs.openbsd.org 2009/10/08 14:03:41 [sshd_config readconf.c ssh_config.5 servconf.c sshd_config.5] disable protocol 1 by default (after a transition period of about 10 years) ok deraadt
2009-02-23 - djm@cvs.openbsd.org 2009/02/22 23:50:57Damien Miller
[ssh_config.5 sshd_config.5] don't advertise experimental options
2009-02-14 - jmc@cvs.openbsd.org 2009/02/12 07:34:20Damien Miller
[ssh_config.5] kill trailing whitespace;