| Age | Commit message (Collapse) | Author |
|---|
|
[ssh_config.5 readconf.h readconf.c]
add the ability to ignore specific unrecognised ssh_config options;
bz#866; ok markus@
|
|
[ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c
ssh_config.5 packet.h]
Add an optional second argument to RekeyLimit in the client to allow
rekeying based on elapsed time in addition to amount of traffic.
with djm@ jmc@, ok djm
|
|
[PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c]
[myproposal.h packet.c ssh_config.5 sshd_config.5]
support AES-GCM as defined in RFC 5647 (but with simpler KEX handling)
ok and feedback djm@
|
|
[PROTOCOL authfile.c cipher.c cipher.h kex.h mac.c myproposal.h]
[packet.c ssh_config.5 sshd_config.5]
add encrypt-then-mac (EtM) modes to openssh by defining new mac algorithms
that change the packet format and compute the MAC over the encrypted
message (including the packet size) instead of the plaintext data;
these EtM modes are considered more secure and used by default.
feedback and ok djm@
|
|
[ssh_config.5 sshconnect2.c]
Make IdentitiesOnly apply to keys obtained from a PKCS11Provider.
This allows control of which keys are offered from tokens using
IdentityFile. ok markus@
|
|
[myproposal.h ssh_config.5 umac.h sshd_config.5 ssh.1 sshd.8 mac.c]
add umac128 variant; ok djm@ at n2k12
(note: further Makefile work is required)
|
|
[ssh_config.5 sshd_config.5]
match the documented MAC order of preference to the actual one;
ok dtucker@
|
|
[mac.c myproposal.h ssh_config.5 sshd_config.5]
Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed
from draft6 of the spec and will not be in the RFC when published. Patch
from mdb at juniper net via bz#2023, ok markus.
|
|
[ssh_config.5]
RSA instead of DSA twice. From Steve.McClellan at radisys com
|
|
[ssh_config.5 sshd_config.5]
fix typo in IPQoS parsing: there is no "AF14" class, but there is
an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
|
|
[mac.c myproposal.h ssh.1 ssh_config.5 sshd.8 sshd_config.5]
Add new SHA256 and SHA512 based HMAC modes from
http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt
Patch from mdb AT juniper.net; feedback and ok markus@
|
|
[ssh_config.5]
explain IdentifyFile's semantics a little better, prompted by bz#1898
ok dtucker jmc
|
|
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c]
Remove undocumented legacy options UserKnownHostsFile2 and
GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile
accept multiple paths per line and making their defaults include
known_hosts2; ok markus
|
|
[ssh_config.5]
- tweak previous
- come consistency fixes
ok djm
|
|
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5]
Add a RequestTTY ssh_config option to allow configuration-based
control over tty allocation (like -t/-T); ok markus@
|
|
[readconf.c ssh_config.5]
support negated Host matching, e.g.
Host *.example.org !c.example.org
User mekmitasdigoat
Will match "a.example.org", "b.example.org", but not "c.example.org"
ok markus@
|
|
[ssh.c ssh_config.5]
add a %L expansion (short-form of the local host name) for ControlPath;
sync some more expansions with LocalCommand; ok markus@
|
|
[ssh_config.5 sshd_config.5]
explain that IPQoS arguments are separated by whitespace; iirc requested
by jmc@ a while back
|
|
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c]
[sshconnect.h sshconnect2.c]
automatically order the hostkeys requested by the client based on
which hostkeys are already recorded in known_hosts. This avoids
hostkey warnings when connecting to servers with new ECDSA keys
that are preferred by default; with markus@
|
|
[ssh_config.5]
libary -> library;
|
|
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h]
[servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5]
allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of
hardcoding lowdelay/throughput.
bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
|
|
[scp.1 ssh-add.1 ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5]
knock out some "-*- nroff -*-" lines;
|
|
[ssh.1 ssh_config.5]
ssh.1: add kexalgorithms to the -o list
ssh_config.5: format the kexalgorithms in a more consistent
(prettier!) way
ok djm
|
|
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h]
[servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5]
add a KexAlgorithms knob to the client and server configuration to allow
selection of which key exchange methods are used by ssh(1) and sshd(8)
and their order of preference.
ok markus@
|
|
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c]
[authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c]
[monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c]
[ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c]
[ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h]
[ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5]
[uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c]
Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and
host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer
better performance than plain DH and DSA at the same equivalent symmetric
key length, as well as much shorter keys.
Only the mandatory sections of RFC5656 are implemented, specifically the
three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and
ECDSA. Point compression (optional in RFC5656 is NOT implemented).
Certificate host and user keys using the new ECDSA key types are supported.
Note that this code has not been tested for interoperability and may be
subject to change.
feedback and ok markus@
|
|
[ssh.1 ssh_config.5 sshd.8]
Remove mentions of weird "addr/port" alternate address format for IPv6
addresses combinations. It hasn't worked for ages and we have supported
the more commen "[addr]:port" format for a long time. ok jmc@ markus@
|
|
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5]
add a "ControlPersist" option that automatically starts a background
ssh(1) multiplex master when connecting. This connection can stay alive
indefinitely, or can be set to automatically close after a user-specified
duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but
further hacked on by wmertens AT cisco.com, apb AT cequrux.com,
martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
|
|
[ssh.c ssh_config.5]
expand %h to the hostname in ssh_config Hostname options. While this
sounds useless, it is actually handy for working with unqualified
hostnames:
Host *.*
Hostname %h
Host *
Hostname %h.example.org
"I like it" markus@
|
|
[ssh_config.5]
tweak previous;
|
|
[ssh.c]
log the hostname and address that we connected to at LogLevel=verbose
after authentication is successful to mitigate "phishing" attacks by
servers with trusted keys that accept authentication silently and
automatically before presenting fake password/passphrase prompts;
"nice!" markus@
|
|
- jmc@cvs.openbsd.org 2010/04/16 06:45:01
[ssh_config.5]
tweak previous; ok djm
|
|
[ssh_config.5 sshconnect.c]
expand %r => remote username in ssh_config:ProxyCommand;
ok deraadt markus
|
|
[ssh_config.5]
tweak previous; ok dtucker
|
|
[ssh_config.5]
Reformat default value of PreferredAuthentications entry (current
formatting implies ", " is acceptable as a separator, which it's not.
ok djm@
|
|
[ssh-add.1 ssh.1 ssh_config.5]
mention loading of certificate files from [private]-cert.pub when
they are present; feedback and ok jmc@
|
|
[ssh-add.1 ssh-keygen.1 ssh.1 ssh_config.5]
pkcs#11 is no longer optional; improve wording; ok jmc@
|
|
[pathnames.h readconf.c readconf.h scp.1 sftp.1 ssh-add.1 ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config.5]
replace our obsolete smartcard code with PKCS#11.
ftp://ftp.rsasecurity.com/pub/pkcs/pkcs-11/v2-20/pkcs-11v2-20.pdf
ssh(1) and ssh-keygen(1) use dlopen(3) directly to talk to a PKCS#11
provider (shared library) while ssh-agent(1) delegates PKCS#11 to
a forked a ssh-pkcs11-helper process.
PKCS#11 is currently a compile time option.
feedback and ok djm@; inspired by patches from Alon Bar-Lev
`
|
|
[channels.c ssh.1 servconf.c sshd_config.5 sshd.c channels.h servconf.h
ssh-keyscan.1 ssh-keyscan.c readconf.c sshconnect.c misc.c ssh.c
readconf.h scp.1 sftp.1 ssh_config.5 misc.h]
Remove RoutingDomain from ssh since it's now not needed. It can be
replaced with "route exec" or "nc -V" as a proxycommand. "route exec"
also ensures that trafic such as DNS lookups stays withing the specified
routingdomain. For example (from reyk):
# route -T 2 exec /usr/sbin/sshd
or inherited from the parent process
$ route -T 2 exec sh
$ ssh 10.1.2.3
ok deraadt@ markus@ stevesk@ reyk@
|
|
[sshd_config.5 ssh_config.5]
sort previous;
|
|
[sshd_config.5 readconf.c ssh_config.5 scp.1 servconf.c sftp.1 ssh.1]
Rename RDomain config option to RoutingDomain to be more clear and
consistent with other options.
NOTE: if you currently use RDomain in the ssh client or server config,
or ssh/sshd -o, you must update to use RoutingDomain.
ok markus@ djm@
|
|
[ssh_config.5]
explain the constraints on LocalCommand some more so people don't
try to abuse it.
|
|
[ssh_config.5 sshd.c misc.h ssh-keyscan.1 readconf.h sshconnect.c
channels.c channels.h servconf.h servconf.c ssh.1 ssh-keyscan.c scp.1
sftp.1 sshd_config.5 readconf.c ssh.c misc.c]
Allow to set the rdomain in ssh/sftp/scp/sshd and ssh-keyscan.
ok markus@
|
|
[sshd_config.5 ssh_config.5 sshd.8 ssh.1]
some tweaks now that protocol 1 is not offered by default; ok markus
|
|
- markus@cvs.openbsd.org 2009/10/08 14:03:41
[sshd_config readconf.c ssh_config.5 servconf.c sshd_config.5]
disable protocol 1 by default (after a transition period of about 10 years)
ok deraadt
|
|
[ssh_config.5 sshd_config.5]
don't advertise experimental options
|
|
[ssh_config.5]
kill trailing whitespace;
|
|
[ssh_config.5]
document RemoteForward usage with 0 listen port
|
|
[ssh_config.5 sshd_config.5]
sync list of preferred ciphers; ok djm@
|
|
[auth.h auth2.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h]
[readconf.c readconf.h servconf.c servconf.h ssh2.h ssh_config.5]
[sshconnect2.c sshd_config.5 jpake.c jpake.h schnorr.c auth2-jpake.c]
[Makefile.in]
Add support for an experimental zero-knowledge password authentication
method using the J-PAKE protocol described in F. Hao, P. Ryan,
"Password Authenticated Key Exchange by Juggling", 16th Workshop on
Security Protocols, Cambridge, April 2008.
This method allows password-based authentication without exposing
the password to the server. Instead, the client and server exchange
cryptographic proofs to demonstrate of knowledge of the password while
revealing nothing useful to an attacker or compromised endpoint.
This is experimental, work-in-progress code and is presently
compiled-time disabled (turn on -DJPAKE in Makefile.inc).
"just commit it. It isn't too intrusive." deraadt@
|
|
[ssh_config.5]
correct and clarify VisualHostKey; ok jmc@
|
