summaryrefslogtreecommitdiff
path: root/ssh_config.5
AgeCommit message (Collapse)Author
2013-05-07* New upstream release (http://www.openssh.com/txt/release-6.2).Colin Watson
- Add support for multiple required authentication in SSH protocol 2 via an AuthenticationMethods option (closes: #195716). - Fix Sophie Germain formula in moduli(5) (closes: #698612). - Update ssh-copy-id to Phil Hands' greatly revised version (closes: #99785, #322228, #620428; LP: #518883, #835901, #1074798).
2013-05-07merge 6.2p1; reorder additions to monitor.h for easier merging in futureColin Watson
2013-01-09 - markus@cvs.openbsd.org 2013/01/08 18:49:04Damien Miller
[PROTOCOL authfile.c cipher.c cipher.h kex.c kex.h monitor_wrap.c] [myproposal.h packet.c ssh_config.5 sshd_config.5] support AES-GCM as defined in RFC 5647 (but with simpler KEX handling) ok and feedback djm@
2012-12-12 - markus@cvs.openbsd.org 2012/12/11 22:31:18Damien Miller
[PROTOCOL authfile.c cipher.c cipher.h kex.h mac.c myproposal.h] [packet.c ssh_config.5 sshd_config.5] add encrypt-then-mac (EtM) modes to openssh by defining new mac algorithms that change the packet format and compute the MAC over the encrypted message (including the packet size) instead of the plaintext data; these EtM modes are considered more secure and used by default. feedback and ok djm@
2012-12-03 - djm@cvs.openbsd.org 2012/12/02 20:26:11Damien Miller
[ssh_config.5 sshconnect2.c] Make IdentitiesOnly apply to keys obtained from a PKCS11Provider. This allows control of which keys are offered from tokens using IdentityFile. ok markus@
2012-10-05 - markus@cvs.openbsd.org 2012/10/04 13:21:50Darren Tucker
[myproposal.h ssh_config.5 umac.h sshd_config.5 ssh.1 sshd.8 mac.c] add umac128 variant; ok djm@ at n2k12 (note: further Makefile work is required)
2012-09-07* New upstream release (http://www.openssh.com/txt/release-6.1).Colin Watson
- Enable pre-auth sandboxing by default for new installs. - Allow "PermitOpen none" to refuse all port-forwarding requests (closes: #543683).
2012-09-06merge 6.1p1Colin Watson
2012-07-02 - naddy@cvs.openbsd.org 2012/06/29 13:57:25Darren Tucker
[ssh_config.5 sshd_config.5] match the documented MAC order of preference to the actual one; ok dtucker@
2012-06-30 - dtucker@cvs.openbsd.org 2012/06/28 05:07:45Damien Miller
[mac.c myproposal.h ssh_config.5 sshd_config.5] Remove hmac-sha2-256-96 and hmac-sha2-512-96 MACs since they were removed from draft6 of the spec and will not be in the RFC when published. Patch from mdb at juniper net via bz#2023, ok markus.
2012-06-20 - dtucker@cvs.openbsd.org 2012/06/18 11:49:58Damien Miller
[ssh_config.5] RSA instead of DSA twice. From Steve.McClellan at radisys com
2012-05-18* New upstream release (http://www.openssh.org/txt/release-6.0).Colin Watson
- Fix IPQoS not being set on non-mapped v4-in-v6 addressed connections (closes: #643312, #650512). - Add a new privilege separation sandbox implementation for Linux's new seccomp sandbox, automatically enabled on platforms that support it. (Note: privilege separation sandboxing is still experimental.)
2012-05-17merge 6.0p1Colin Watson
2011-09-22 - djm@cvs.openbsd.org 2011/09/09 00:43:00Damien Miller
[ssh_config.5 sshd_config.5] fix typo in IPQoS parsing: there is no "AF14" class, but there is an "AF21" class. Spotted by giesen AT snickers.org; ok markus stevesk
2011-09-06* New upstream release (http://www.openssh.org/txt/release-5.9).Colin Watson
- Introduce sandboxing of the pre-auth privsep child using an optional sshd_config(5) "UsePrivilegeSeparation=sandbox" mode that enables mandatory restrictions on the syscalls the privsep child can perform. - Add new SHA256-based HMAC transport integrity modes from http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt. - The pre-authentication sshd(8) privilege separation slave process now logs via a socket shared with the master process, avoiding the need to maintain /dev/log inside the chroot (closes: #75043, #429243, #599240). - ssh(1) now warns when a server refuses X11 forwarding (closes: #504757). - sshd_config(5)'s AuthorizedKeysFile now accepts multiple paths, separated by whitespace (closes: #76312). The authorized_keys2 fallback is deprecated but documented (closes: #560156). - ssh(1) and sshd(8): set IPv6 traffic class from IPQoS, as well as IPv4 ToS/DSCP (closes: #498297). - ssh-add(1) now accepts keys piped from standard input. E.g. "ssh-add - < /path/to/key" (closes: #229124). - Clean up lost-passphrase text in ssh-keygen(1) (closes: #444691). - Say "required" rather than "recommended" in unprotected-private-key warning (LP: #663455).
2011-09-06merge 5.9p1Colin Watson
2011-08-06 - djm@cvs.openbsd.org 2011/08/02 01:22:11Damien Miller
[mac.c myproposal.h ssh.1 ssh_config.5 sshd.8 sshd_config.5] Add new SHA256 and SHA512 based HMAC modes from http://www.ietf.org/id/draft-dbider-sha2-mac-for-ssh-02.txt Patch from mdb AT juniper.net; feedback and ok markus@
2011-06-20 - djm@cvs.openbsd.org 2011/06/04 00:10:26Damien Miller
[ssh_config.5] explain IdentifyFile's semantics a little better, prompted by bz#1898 ok dtucker jmc
2011-05-29 - djm@cvs.openbsd.org 2011/05/24 07:15:47Damien Miller
[readconf.c readconf.h ssh.c ssh_config.5 sshconnect.c sshconnect2.c] Remove undocumented legacy options UserKnownHostsFile2 and GlobalKnownHostsFile2 by making UserKnownHostsFile/GlobalKnownHostsFile accept multiple paths per line and making their defaults include known_hosts2; ok markus
2011-05-15 - jmc@cvs.openbsd.org 2011/05/07 23:19:39Damien Miller
[ssh_config.5] - tweak previous - come consistency fixes ok djm
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:34:32Damien Miller
[clientloop.c mux.c readconf.c readconf.h ssh.c ssh_config.5] Add a RequestTTY ssh_config option to allow configuration-based control over tty allocation (like -t/-T); ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:31:38Damien Miller
[readconf.c ssh_config.5] support negated Host matching, e.g. Host *.example.org !c.example.org User mekmitasdigoat Will match "a.example.org", "b.example.org", but not "c.example.org" ok markus@
2011-05-15 - djm@cvs.openbsd.org 2011/05/06 21:18:02Damien Miller
[ssh.c ssh_config.5] add a %L expansion (short-form of the local host name) for ControlPath; sync some more expansions with LocalCommand; ok markus@
2011-01-24* New upstream release (http://www.openssh.org/txt/release-5.7):Colin Watson
- Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. - sftp(1)/sftp-server(8): add a protocol extension to support a hard link operation. It is available through the "ln" command in the client. The old "ln" behaviour of creating a symlink is available using its "-s" option or through the preexisting "symlink" command. - scp(1): Add a new -3 option to scp: Copies between two remote hosts are transferred through the local host (closes: #508613). - ssh(1): "atomically" create the listening mux socket by binding it on a temporary name and then linking it into position after listen() has succeeded. This allows the mux clients to determine that the server socket is either ready or stale without races (closes: #454784). Stale server sockets are now automatically removed (closes: #523250). - ssh(1): install a SIGCHLD handler to reap expired child process (closes: #594687). - ssh(1)/ssh-agent(1): honour $TMPDIR for client xauth and ssh-agent temporary directories (closes: #357469, although only if you arrange for ssh-agent to actually see $TMPDIR since the setgid bit will cause it to be stripped off).
2011-01-24merge 5.7p1Colin Watson
2011-01-24import openssh-5.6p1-gsskex-all-20110101.patchColin Watson
2010-12-26 - djm@cvs.openbsd.org 2010/12/08 04:02:47Damien Miller
[ssh_config.5 sshd_config.5] explain that IPQoS arguments are separated by whitespace; iirc requested by jmc@ a while back
2010-12-01 - djm@cvs.openbsd.org 2010/11/29 23:45:51Damien Miller
[auth.c hostfile.c hostfile.h ssh.c ssh_config.5 sshconnect.c] [sshconnect.h sshconnect2.c] automatically order the hostkeys requested by the client based on which hostkeys are already recorded in known_hosts. This avoids hostkey warnings when connecting to servers with new ECDSA keys that are preferred by default; with markus@
2010-11-20 - jmc@cvs.openbsd.org 2010/11/15 07:40:14Damien Miller
[ssh_config.5] libary -> library;
2010-11-20 - djm@cvs.openbsd.org 2010/11/13 23:27:51Damien Miller
[clientloop.c misc.c misc.h packet.c packet.h readconf.c readconf.h] [servconf.c servconf.h session.c ssh.c ssh_config.5 sshd_config.5] allow ssh and sshd to set arbitrary TOS/DSCP/QoS values instead of hardcoding lowdelay/throughput. bz#1733 patch from philipp AT redfish-solutions.com; ok markus@ deraadt@
2010-11-05 - jmc@cvs.openbsd.org 2010/10/28 18:33:28Damien Miller
[scp.1 ssh-add.1 ssh-keygen.1 ssh.1 ssh_config.5 sshd.8 sshd_config.5] knock out some "-*- nroff -*-" lines;
2010-09-24 - jmc@cvs.openbsd.org 2010/09/22 08:30:08Damien Miller
[ssh.1 ssh_config.5] ssh.1: add kexalgorithms to the -o list ssh_config.5: format the kexalgorithms in a more consistent (prettier!) way ok djm
2010-09-24 - djm@cvs.openbsd.org 2010/09/22 05:01:30Damien Miller
[kex.c kex.h kexecdh.c kexecdhc.c kexecdhs.c readconf.c readconf.h] [servconf.c servconf.h ssh_config.5 sshconnect2.c sshd.c sshd_config.5] add a KexAlgorithms knob to the client and server configuration to allow selection of which key exchange methods are used by ssh(1) and sshd(8) and their order of preference. ok markus@
2010-08-31 - djm@cvs.openbsd.org 2010/08/31 11:54:45Damien Miller
[PROTOCOL PROTOCOL.agent PROTOCOL.certkeys auth2-jpake.c authfd.c] [authfile.c buffer.h dns.c kex.c kex.h key.c key.h monitor.c] [monitor_wrap.c myproposal.h packet.c packet.h pathnames.h readconf.c] [ssh-add.1 ssh-add.c ssh-agent.1 ssh-agent.c ssh-keygen.1 ssh-keygen.c] [ssh-keyscan.1 ssh-keyscan.c ssh-keysign.8 ssh.1 ssh.c ssh2.h] [ssh_config.5 sshconnect.c sshconnect2.c sshd.8 sshd.c sshd_config.5] [uuencode.c uuencode.h bufec.c kexecdh.c kexecdhc.c kexecdhs.c ssh-ecdsa.c] Implement Elliptic Curve Cryptography modes for key exchange (ECDH) and host/user keys (ECDSA) as specified by RFC5656. ECDH and ECDSA offer better performance than plain DH and DSA at the same equivalent symmetric key length, as well as much shorter keys. Only the mandatory sections of RFC5656 are implemented, specifically the three REQUIRED curves nistp256, nistp384 and nistp521 and only ECDH and ECDSA. Point compression (optional in RFC5656 is NOT implemented). Certificate host and user keys using the new ECDSA key types are supported. Note that this code has not been tested for interoperability and may be subject to change. feedback and ok markus@
2010-08-23* New upstream release (http://www.openssh.com/txt/release-5.6):Colin Watson
- Added a ControlPersist option to ssh_config(5) that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity (closes: #335697, #350898, #454787, #500573, #550262). - Support AuthorizedKeysFile, AuthorizedPrincipalsFile, HostbasedUsesNameFromPacketOnly, and PermitTunnel in sshd_config(5) Match blocks (closes: #549858). - sftp(1): fix ls in working directories that contain globbing characters in their pathnames (LP: #530714).
2010-08-23merge 5.6p1Colin Watson
2010-08-05 - djm@cvs.openbsd.org 2010/08/04 05:37:01Damien Miller
[ssh.1 ssh_config.5 sshd.8] Remove mentions of weird "addr/port" alternate address format for IPv6 addresses combinations. It hasn't worked for ages and we have supported the more commen "[addr]:port" format for a long time. ok jmc@ markus@
2010-08-03 - djm@cvs.openbsd.org 2010/07/19 09:15:12Damien Miller
[clientloop.c readconf.c readconf.h ssh.c ssh_config.5] add a "ControlPersist" option that automatically starts a background ssh(1) multiplex master when connecting. This connection can stay alive indefinitely, or can be set to automatically close after a user-specified duration of inactivity. bz#1330 - patch by dwmw2 AT infradead.org, but further hacked on by wmertens AT cisco.com, apb AT cequrux.com, martin-mindrot-bugzilla AT earth.li and myself; "looks ok" markus@
2010-07-16 - djm@cvs.openbsd.org 2010/07/12 22:41:13Damien Miller
[ssh.c ssh_config.5] expand %h to the hostname in ssh_config Hostname options. While this sounds useless, it is actually handy for working with unqualified hostnames: Host *.* Hostname %h Host * Hostname %h.example.org "I like it" markus@
2010-07-02 - jmc@cvs.openbsd.org 2010/06/26 00:57:07Damien Miller
[ssh_config.5] tweak previous;
2010-06-26 - djm@cvs.openbsd.org 2010/06/25 23:10:30Damien Miller
[ssh.c] log the hostname and address that we connected to at LogLevel=verbose after authentication is successful to mitigate "phishing" attacks by servers with trusted keys that accept authentication silently and automatically before presenting fake password/passphrase prompts; "nice!" markus@
2010-04-18 - OpenBSD CVS SyncDamien Miller
- jmc@cvs.openbsd.org 2010/04/16 06:45:01 [ssh_config.5] tweak previous; ok djm
2010-04-16* New upstream release:Colin Watson
- Unbreak sshd_config's AuthorizedKeysFile option for $HOME-relative paths. - Include a language tag when sending a protocol 2 disconnection message. - Make logging of certificates used for user authentication more clear and consistent between CAs specified using TrustedUserCAKeys and authorized_keys.
2010-04-16merge 5.5p1Colin Watson
2010-04-16 - djm@cvs.openbsd.org 2010/04/14 22:27:42Damien Miller
[ssh_config.5 sshconnect.c] expand %r => remote username in ssh_config:ProxyCommand; ok deraadt markus
2010-04-16 - jmc@cvs.openbsd.org 2010/03/27 14:26:55Damien Miller
[ssh_config.5] tweak previous; ok dtucker
2010-03-31Drop most of our "LogLevel SILENT" (-qq) patch. This was originallyColin Watson
introduced to match the behaviour of non-free SSH, in which -q does not suppress fatal errors, but matching the behaviour of OpenSSH upstream is much more important nowadays. We no longer document that -q does not suppress fatal errors (closes: #280609). Migrate "LogLevel SILENT" to "LogLevel QUIET" in sshd_config on upgrade.
2010-03-31* New upstream release (LP: #535029).Colin Watson
- After a transition period of about 10 years, this release disables SSH protocol 1 by default. Clients and servers that need to use the legacy protocol must explicitly enable it in ssh_config / sshd_config or on the command-line. - Remove the libsectok/OpenSC-based smartcard code and add support for PKCS#11 tokens. This support is enabled by default in the Debian packaging, since it now doesn't involve additional library dependencies (closes: #231472, LP: #16918). - Add support for certificate authentication of users and hosts using a new, minimal OpenSSH certificate format (closes: #482806). - Added a 'netcat mode' to ssh(1): "ssh -W host:port ...". - Add the ability to revoke keys in sshd(8) and ssh(1). (For the Debian package, this overlaps with the key blacklisting facility added in openssh 1:4.7p1-9, but with different file formats and slightly different scopes; for the moment, I've roughly merged the two.) - Various multiplexing improvements, including support for requesting port-forwardings via the multiplex protocol (closes: #360151). - Allow setting an explicit umask on the sftp-server(8) commandline to override whatever default the user has (closes: #496843). - Many sftp client improvements, including tab-completion, more options, and recursive transfer support for get/put (LP: #33378). The old mget/mput commands never worked properly and have been removed (closes: #270399, #428082). - Do not prompt for a passphrase if we fail to open a keyfile, and log the reason why the open failed to debug (closes: #431538). - Prevent sftp from crashing when given a "-" without a command. Also, allow whitespace to follow a "-" (closes: #531561).
2010-03-31merge 5.4p1Colin Watson
2010-03-26 - dtucker@cvs.openbsd.org 2010/03/26 01:06:13Darren Tucker
[ssh_config.5] Reformat default value of PreferredAuthentications entry (current formatting implies ", " is acceptable as a separator, which it's not. ok djm@
generated by cgit v1.2.3 (git 2.39.1) at 2024-07-03 01:03:42 +0000