| Age | Commit message (Collapse) | Author |
|---|
|
ssh: Enable ForwardX11Trusted, returning to earlier semantics which cause
fewer problems with existing setups (http://bugs.debian.org/237021).
ssh: Set 'SendEnv LANG LC_*' by default (http://bugs.debian.org/264024).
ssh: Enable HashKnownHosts by default to try to limit the spread of ssh
worms.
ssh: Enable GSSAPIAuthentication and disable GSSAPIDelegateCredentials by
default.
Document all of this, along with several sshd defaults set in
debian/openssh-server.postinst.
Author: Russ Allbery <rra@debian.org>
Forwarded: not-needed
Last-Update: 2015-12-07
Patch-Name: debian-config.patch
|
|
This patch has been rejected upstream: "None of the OpenSSH developers are
in favour of adding this, and this situation has not changed for several
years. This is not a slight on Simon's patch, which is of fine quality, but
just that a) we don't trust GSSAPI implementations that much and b) we don't
like adding new KEX since they are pre-auth attack surface. This one is
particularly scary, since it requires hooks out to typically root-owned
system resources."
However, quite a lot of people rely on this in Debian, and it's better to
have it merged into the main openssh package rather than having separate
-krb5 packages (as we used to have). It seems to have a generally good
security history.
Bug: https://bugzilla.mindrot.org/show_bug.cgi?id=1242
Last-Updated: 2016-01-04
Patch-Name: gssapi.patch
|
|
[ssh_config]
Remove gssapi config parts from ssh_config, as was already done for
sshd_config. Req by/ok ajacoutot@
ID SYNC ONLY for portable; kerberos/gssapi is still pretty popular
|
|
[ssh_config sshconnect2.c packet.c readconf.h readconf.c clientloop.c
ssh_config.5 packet.h]
Add an optional second argument to RekeyLimit in the client to allow
rekeying based on elapsed time in addition to amount of traffic.
with djm@ jmc@, ok djm
|
|
[ssh_config channels.c ssh.1 channels.h ssh.c]
Add a 'netcat mode' (ssh -W). This connects stdio on the client to a
single port forward on the server. This allows, for example, using ssh as
a ProxyCommand to route connections via intermediate servers.
bz #1618, man page help from jmc@, ok markus@
|
|
[ssh_config]
sync with revised default ciphers; pointed out by dkrause@
|
|
[ssh_config]
Add VisualHostKey to example file, ok djm@
|
|
[ssh_config]
Add a "MACs" line after "Ciphers" with the default MAC algorithms,
to ease people who want to tweak both (eg. for performance reasons).
ok deraadt@ djm@ dtucker@
|
|
[ssh_config]
Add GSSAPIAuthentication and GSSAPIDelegateCredentials to examples in sample
ssh_config. ok markus@
|
|
[auth-options.c auth-options.h channels.c channels.h clientloop.c]
[misc.c misc.h readconf.c readconf.h scp.c servconf.c servconf.h]
[serverloop.c sftp.c ssh.1 ssh.c ssh_config ssh_config.5 sshconnect.c]
[sshconnect.h sshd.8 sshd_config sshd_config.5]
Add support for tun(4) forwarding over OpenSSH, based on an idea and
initial channel code bits by markus@. This is a simple and easy way to
use OpenSSH for ad hoc virtual private network connections, e.g.
administrative tunnels or secure wireless access. It's based on a new
ssh channel and works similar to the existing TCP forwarding support,
except that it depends on the tun(4) network interface on both ends of
the connection for layer 2 or layer 3 tunneling. This diff also adds
support for LocalCommand in the ssh(1) client.
ok djm@, markus@, jmc@ (manpages), tested and discussed with others
|
|
[ssh_config]
Make it clear that the example entries in ssh_config are only some of the
commonly-used options and refer the user to ssh_config(5) for more
details; ok djm@
|
|
[auth1.c readconf.c readconf.h servconf.c servconf.h ssh.c ssh_config
ssh_config.5 sshconnect1.c sshd.8 sshd.c sshd_config sshd_config.5]
remove RhostsAuthentication; suggested by djm@ before; ok djm@, deraadt@,
fgsch@, miod@, henning@, jakob@ and others
|
|
[readconf.c ssh_config ssh_config.5 ssh-keysign.c]
add AddressFamily option to ssh_config (like -4, -6 on commandline).
Portable bug #534; ok markus@
|
|
[readconf.c readconf.h ssh_config ssh_config.5 sshconnect.c]
add a ConnectTimeout option to ssh, based on patch from
Jean-Charles Longuet (jclonguet at free.fr); portable #207 ok markus@
|
|
[ssh-keysign.8 ssh-keysign.c ssh.c ssh_config]
re-enable ssh-keysign's sbit, but make ssh-keysign read
/etc/ssh/ssh_config and exit if HostbasedAuthentication is disabled
globally. based on discussions with deraadt, itojun and sommerfeld;
ok itojun@
|
|
[ssh_config sshd_config]
refer to config file man page
|
|
[ssh_config]
update defaults for RhostsRSAAuthentication and RhostsAuthentication
here too (all options commented out with default value).
|
|
[ssh_config]
remove FallBackToRsh/UseRsh
|
|
[ssh_config]
correct some commented defaults. add Ciphers default. ok markus@
|
|
[ssh_config]
grammar in comment
|
|
[ssh_config]
id_rsa1/2 -> id_rsa; ok markus@
|
|
[readconf.c ssh_config]
default to SSH2, now that m68k runs fast
|
|
- (djm) OpenBSD CVS sync:
- markus@cvs.openbsd.org 2001/02/03 03:08:38
[auth-options.c auth-rh-rsa.c auth-rhosts.c auth.c canohost.c]
[canohost.h servconf.c servconf.h session.c sshconnect1.c sshd.8]
[sshd_config]
make ReverseMappingCheck optional in sshd_config; ok djm@,dugsong@
- markus@cvs.openbsd.org 2001/02/03 03:19:51
[ssh.1 sshd.8 sshd_config]
Skey is now called ChallengeResponse
- markus@cvs.openbsd.org 2001/02/03 03:43:09
[sshd.8]
use no-pty option in .ssh/authorized_keys* if you need a 8-bit clean
channel. note from Erik.Anggard@cygate.se (pr/1659)
- stevesk@cvs.openbsd.org 2001/02/03 10:03:06
[ssh.1]
typos; ok markus@
- djm@cvs.openbsd.org 2001/02/04 04:11:56
[scp.1 sftp-server.c ssh.1 sshd.8 sftp-client.c sftp-client.h]
[sftp-common.c sftp-common.h sftp-int.c sftp-int.h sftp.1 sftp.c]
Basic interactive sftp client; ok theo@
- (djm) Update RPM specs for new sftp binary
- (djm) Update several bits for new optional reverse lookup stuff. I
think I got them all.
|
|
[atomicio.h canohost.h clientloop.h deattack.h dh.h dispatch.h
groupaccess.c groupaccess.h hmac.h hostfile.h includes.h kex.h
key.h log.h login.h match.h misc.h myproposal.h nchan.ms pathnames.h
radix.h readpass.h rijndael.h serverloop.h session.h sftp.h ssh-add.1
ssh-dss.h ssh-keygen.1 ssh-keyscan.1 ssh-rsa.h ssh1.h ssh_config
sshconnect.h sshd_config tildexpand.h uidswap.h uuencode.h]
$OpenBSD$
|
|
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
|
|
- (djm) Clean up diff against OpenBSD.
|
|
- deraadt@cvs.openbsd.org 2000/07/11 02:11:34
[session.c sshd.c ]
make MaxStartups code still work with -d; djm
- deraadt@cvs.openbsd.org 2000/07/11 13:17:45
[readconf.c ssh_config]
disable FallBackToRsh by default
|
|
|
|
[channels.c]
- fix pr 1196, listen_port and port_to_connect interchanged
[scp.c]
- after completion, replace the progress bar ETA counter with a final
elapsed time; my idea, aaron wrote the patch
[ssh_config sshd_config]
- show 'Protocol' as an example, ok markus@
[sshd.c]
- missing xfree()
- Add missing header to bsd-misc.c
|
|
<andre.lucas@dial.pipex.com>
- Re-added latest (unmodified) OpenBSD manpages
|
|
and script from Andre Lucas <andre.lucas@dial.pipex.com>
- Removed credits from README to CREDITS file, updated.
|
|
|
