summaryrefslogtreecommitdiff
path: root/sshconnect.c
AgeCommit message (Collapse)Author
2010-01-24* New upstream release.Colin Watson
* Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.3p1-gsskex-all-20100124.patch.
2010-01-01* New upstream release (closes: #536182). Yes, I know 5.3p1 has been outColin Watson
for a while, but there's no GSSAPI patch available for it yet. - Change the default cipher order to prefer the AES CTR modes and the revised "arcfour256" mode to CBC mode ciphers that are susceptible to CPNI-957037 "Plaintext Recovery Attack Against SSH". - Add countermeasures to mitigate CPNI-957037-style attacks against the SSH protocol's use of CBC-mode ciphers. Upon detection of an invalid packet length or Message Authentication Code, ssh/sshd will continue reading up to the maximum supported packet length rather than immediately terminating the connection. This eliminates most of the known differences in behaviour that leaked information about the plaintext of injected data which formed the basis of this attack (closes: #506115, LP: #379329). - ForceCommand directive now accepts commandline arguments for the internal-sftp server (closes: #524423, LP: #362511). - Add AllowAgentForwarding to available Match keywords list (closes: #540623). - Make ssh(1) send the correct channel number for SSH2_MSG_CHANNEL_SUCCESS and SSH2_MSG_CHANNEL_FAILURE messages to avoid triggering 'Non-public channel' error messages on sshd(8) in openssh-5.1. - Avoid printing 'Non-public channel' warnings in sshd(8), since the ssh(1) has sent incorrect channel numbers since ~2004 (this reverts a behaviour introduced in openssh-5.1; closes: #496017). * Update to GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-5.2p1-gsskex-all-20090726.patch, including cascading credentials support (LP: #416958).
2009-06-21 - andreas@cvs.openbsd.org 2009/05/28 16:50:16Darren Tucker
[sshd.c packet.c serverloop.c monitor_wrap.c clientloop.c sshconnect.c monitor.c Added roaming.h roaming_common.c roaming_dummy.c] Keep track of number of bytes read and written. Needed for upcoming changes. Most code from Martin Forssen, maf at appgate dot com. ok markus@ Also, applied appropriate changes to Makefile.in
2009-06-21 - andreas@cvs.openbsd.org 2009/05/28 16:50:16Darren Tucker
[sshd.c packet.c serverloop.c monitor_wrap.c clientloop.c sshconnect.c monitor.c] Keep track of number of bytes read and written. Needed for upcoming changes. Most code from Martin Forssen, maf at appgate dot com. ok markus@
2009-02-01 - (dtucker) [defines.h sshconnect.c] INET6_ADDRSTRLEN is now needed inDarren Tucker
channels.c too, so move the definition for non-IP6 platforms to defines.h where it can be shared.
2008-11-03 - stevesk@cvs.openbsd.org 2008/10/14 18:11:33Damien Miller
[sshconnect.c] use #define ROQUIET here; no binary change. ok dtucker@
2008-07-29Look for $SHELL on the path when executing ProxyCommands orColin Watson
LocalCommands (closes: #492728).
2008-07-22* New upstream release (closes: #474301). Important changes not previouslyColin Watson
backported to 4.7p1: - 4.9/4.9p1 (http://www.openssh.com/txt/release-4.9): + Added chroot(2) support for sshd(8), controlled by a new option "ChrootDirectory" (closes: #139047, LP: #24777). + Linked sftp-server(8) into sshd(8). The internal sftp server is used when the command "internal-sftp" is specified in a Subsystem or ForceCommand declaration. When used with ChrootDirectory, the internal sftp server requires no special configuration of files inside the chroot environment. + Added a protocol extension method "posix-rename@openssh.com" for sftp-server(8) to perform POSIX atomic rename() operations; sftp(1) prefers this if available (closes: #308561). + Removed the fixed limit of 100 file handles in sftp-server(8). + ssh(8) will now skip generation of SSH protocol 1 ephemeral server keys when in inetd mode and protocol 2 connections are negotiated. This speeds up protocol 2 connections to inetd-mode servers that also allow Protocol 1. + Accept the PermitRootLogin directive in a sshd_config(5) Match block. Allows for, e.g. permitting root only from the local network. + Reworked sftp(1) argument splitting and escaping to be more internally consistent (i.e. between sftp commands) and more consistent with sh(1). Please note that this will change the interpretation of some quoted strings, especially those with embedded backslash escape sequences. + Support "Banner=none" in sshd_config(5) to disable sending of a pre-login banner (e.g. in a Match block). + ssh(1) ProxyCommands are now executed with $SHELL rather than /bin/sh. + ssh(1)'s ConnectTimeout option is now applied to both the TCP connection and the SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand. + scp(1) incorrectly reported "stalled" on slow copies (closes: #140828). + scp(1) date underflow for timestamps before epoch. + ssh(1) used the obsolete SIG DNS RRtype for host keys in DNS, instead of the current standard RRSIG. + Correctly drain ACKs when a sftp(1) upload write fails midway, avoids a fatal() exit from what should be a recoverable condition. + Fixed ssh-keygen(1) selective host key hashing (i.e. "ssh-keygen -HF hostname") to not include any IP address in the data to be hashed. + Make ssh(1) skip listening on the IPv6 wildcard address when a binding address of 0.0.0.0 is used against an old SSH server that does not support the RFC4254 syntax for wildcard bind addresses. + Enable IPV6_V6ONLY socket option on sshd(8) listen socket, as is already done for X11/TCP forwarding sockets (closes: #439661). + Fix FD leak that could hang a ssh(1) connection multiplexing master. + Make ssh(1) -q option documentation consistent with reality. + Fixed sshd(8) PAM support not calling pam_session_close(), or failing to call it with root privileges (closes: #372680). + Fix activation of OpenSSL engine support when requested in configure (LP: #119295). - 5.1/5.1p1 (http://www.openssh.com/txt/release-5.1): + Introduce experimental SSH Fingerprint ASCII Visualisation to ssh(1) and ssh-keygen(1). Visual fingerprint display is controlled by a new ssh_config(5) option "VisualHostKey". The intent is to render SSH host keys in a visual form that is amenable to easy recall and rejection of changed host keys. + sshd_config(5) now supports CIDR address/masklen matching in "Match address" blocks, with a fallback to classic wildcard matching. + sshd(8) now supports CIDR matching in ~/.ssh/authorized_keys from="..." restrictions, also with a fallback to classic wildcard matching. + Added an extended test mode (-T) to sshd(8) to request that it write its effective configuration to stdout and exit. Extended test mode also supports the specification of connection parameters (username, source address and hostname) to test the application of sshd_config(5) Match rules. + ssh(1) now prints the number of bytes transferred and the overall connection throughput for SSH protocol 2 sessions when in verbose mode (previously these statistics were displayed for protocol 1 connections only). + sftp-server(8) now supports extension methods statvfs@openssh.com and fstatvfs@openssh.com that implement statvfs(2)-like operations. + sftp(1) now has a "df" command to the sftp client that uses the statvfs@openssh.com to produce a df(1)-like display of filesystem space and inode utilisation (requires statvfs@openssh.com support on the server). + Added a MaxSessions option to sshd_config(5) to allow control of the number of multiplexed sessions supported over a single TCP connection. This allows increasing the number of allowed sessions above the previous default of 10, disabling connection multiplexing (MaxSessions=1) or disallowing login/shell/subsystem sessions entirely (MaxSessions=0). + Added a no-more-sessions@openssh.com global request extension that is sent from ssh(1) to sshd(8) when the client knows that it will never request another session (i.e. when session multiplexing is disabled). This allows a server to disallow further session requests and terminate the session in cases where the client has been hijacked. + ssh-keygen(1) now supports the use of the -l option in combination with -F to search for a host in ~/.ssh/known_hosts and display its fingerprint. + ssh-keyscan(1) now defaults to "rsa" (protocol 2) keys, instead of "rsa1". + Added an AllowAgentForwarding option to sshd_config(8) to control whether authentication agent forwarding is permitted. Note that this is a loose control, as a client may install their own unofficial forwarder. + ssh(1) and sshd(8): avoid unnecessary malloc/copy/free when receiving network data, resulting in a ~10% speedup. + ssh(1) and sshd(8) will now try additional addresses when connecting to a port forward destination whose DNS name resolves to more than one address. The previous behaviour was to try the only first address and give up if that failed. + ssh(1) and sshd(8) now support signalling that channels are half-closed for writing, through a channel protocol extension notification "eow@openssh.com". This allows propagation of closed file descriptors, so that commands such as "ssh -2 localhost od /bin/ls | true" do not send unnecessary data over the wire. + sshd(8): increased the default size of ssh protocol 1 ephemeral keys from 768 to 1024 bits. + When ssh(1) has been requested to fork after authentication ("ssh -f") with ExitOnForwardFailure enabled, delay the fork until after replies for any -R forwards have been seen. Allows for robust detection of -R forward failure when using -f. + "Match group" blocks in sshd_config(5) now support negation of groups. E.g. "Match group staff,!guests". + sftp(1) and sftp-server(8) now allow chmod-like operations to set set[ug]id/sticky bits. + The MaxAuthTries option is now permitted in sshd_config(5) match blocks. + Multiplexed ssh(1) sessions now support a subset of the ~ escapes that are available to a primary connection. + ssh(1) connection multiplexing will now fall back to creating a new connection in most error cases (closes: #352830). + Make ssh(1) deal more gracefully with channel requests that fail. Previously it would optimistically assume that requests would always succeed, which could cause hangs if they did not (e.g. when the server runs out of file descriptors). + ssh(1) now reports multiplexing errors via the multiplex slave's stderr where possible (subject to LogLevel in the mux master). + Prevent sshd(8) from erroneously applying public key restrictions leaned from ~/.ssh/authorized_keys to other authentication methods when public key authentication subsequently fails (LP: #161047). + Fixed an UMAC alignment problem that manifested on Itanium platforms.
2008-07-02 - dtucker@cvs.openbsd.org 2008/07/01 07:24:22Darren Tucker
[sshconnect.c sshd.c] Send CR LF during protocol banner exchanges, but only for Protocol 2 only, in order to comply with RFC 4253. bz #1443, ok djm@
2008-07-02 - dtucker@cvs.openbsd.org 2008/07/01 07:20:52Darren Tucker
[sshconnect.c] Check ExitOnForwardFailure if forwardings are disabled due to a failed host key check. ok djm@
2008-06-30 - grunk@cvs.openbsd.org 2008/06/26 11:46:31Damien Miller
[readconf.c readconf.h ssh.1 ssh_config.5 sshconnect.c] Move SSH Fingerprint Visualization away from sharing the config option CheckHostIP to an own config option named VisualHostKey. While there, fix the behaviour that ssh would draw a random art picture on every newly seen host even when the option was not enabled. prodded by deraadt@, discussions, help and ok markus@ djm@ dtucker@
2008-06-13 - ian@cvs.openbsd.org 2008/06/12 23:24:58Darren Tucker
[sshconnect.c] tweak wording in message, ok deraadt@ jmc@
2008-06-13 - dtucker@cvs.openbsd.org 2008/06/12 20:38:28Darren Tucker
[sshd.c sshconnect.c packet.h misc.c misc.h packet.c] Make keepalive timeouts apply while waiting for a packet, particularly during key renegotiation (bz #1363). With djm and Matt Day, ok djm@
2008-06-13 - grunk@cvs.openbsd.org 2008/06/12 00:13:55Darren Tucker
[sshconnect.c] Make ssh print the random art also when ssh'ing to a host using IP only. spotted by naddy@, ok and help djm@ dtucker@
2008-06-13 - dtucker@cvs.openbsd.org 2008/06/12 00:03:49Darren Tucker
[dns.c canohost.c sshconnect.c] Do not pass "0" strings as ports to getaddrinfo because the lookups can slow things down and we never use the service info anyway. bz #859, patch from YOSHIFUJI Hideaki and John Devitofranceschi. ok deraadt@ djm@ djm belives that the reason for the "0" strings is to ensure that it's not possible to call getaddrinfo with both host and port being NULL. In the case of canohost.c host is a local array. In the case of sshconnect.c, it's checked for null immediately before use. In dns.c it ultimately comes from ssh.c:main() and is guaranteed to be non-null but it's not obvious, so I added a warning message in case it is ever passed a null.
2008-06-13 - grunk@cvs.openbsd.org 2008/06/11 21:01:35Darren Tucker
[ssh_config.5 key.h readconf.c readconf.h ssh-keygen.1 ssh-keygen.c key.c sshconnect.c] Introduce SSH Fingerprint ASCII Visualization, a technique inspired by the graphical hash visualization schemes known as "random art", and by Dan Kaminsky's musings on the subject during a BlackOp talk at the 23C3 in Berlin. Scientific publication (original paper): "Hash Visualization: a New Technique to improve Real-World Security", Perrig A. and Song D., 1999, International Workshop on Cryptographic Techniques and E-Commerce (CrypTEC '99) http://sparrow.ece.cmu.edu/~adrian/projects/validation/validation.pdf The algorithm used here is a worm crawling over a discrete plane, leaving a trace (augmenting the field) everywhere it goes. Movement is taken from dgst_raw 2bit-wise. Bumping into walls makes the respective movement vector be ignored for this turn, thus switching to the other color of the chessboard. Graphs are not unambiguous for now, because circles in graphs can be walked in either direction. discussions with several people, help, corrections and ok markus@ djm@
2007-12-29 - dtucker@cvs.openbsd.org 2007/12/27 14:22:08Darren Tucker
[servconf.c canohost.c misc.c channels.c sshconnect.c misc.h ssh-keyscan.c sshd.c] Add a small helper function to consistently handle the EAI_SYSTEM error code of getaddrinfo. Prompted by vgiffin at apple com via bz #1417. ok markus@ stevesk@
2007-09-17 - djm@cvs.openbsd.org 2007/09/04 11:15:56Damien Miller
[ssh.c sshconnect.c sshconnect.h] make ssh(1)'s ConnectTimeout option apply to both the TCP connection and SSH banner exchange (previously it just covered the TCP connection). This allows callers of ssh(1) to better detect and deal with stuck servers that accept a TCP connection but don't progress the protocol, and also makes ConnectTimeout useful for connections via a ProxyCommand; feedback and "looks ok" markus@
2007-09-17 - djm@cvs.openbsd.org 2007/08/23 03:23:26Damien Miller
[sshconnect.c] Execute ProxyCommands with $SHELL rather than /bin/sh unconditionally
2007-06-12* New upstream release (closes: #395507, #397961, #420035). ImportantColin Watson
changes not previously backported to 4.3p2: - 4.4/4.4p1 (http://www.openssh.org/txt/release-4.4): + On portable OpenSSH, fix a GSSAPI authentication abort that could be used to determine the validity of usernames on some platforms. + Implemented conditional configuration in sshd_config(5) using the "Match" directive. This allows some configuration options to be selectively overridden if specific criteria (based on user, group, hostname and/or address) are met. So far a useful subset of post-authentication options are supported and more are expected to be added in future releases. + Add support for Diffie-Hellman group exchange key agreement with a final hash of SHA256. + Added a "ForceCommand" directive to sshd_config(5). Similar to the command="..." option accepted in ~/.ssh/authorized_keys, this forces the execution of the specified command regardless of what the user requested. This is very useful in conjunction with the new "Match" option. + Add a "PermitOpen" directive to sshd_config(5). This mirrors the permitopen="..." authorized_keys option, allowing fine-grained control over the port-forwardings that a user is allowed to establish. + Add optional logging of transactions to sftp-server(8). + ssh(1) will now record port numbers for hosts stored in ~/.ssh/known_hosts when a non-standard port has been requested (closes: #50612). + Add an "ExitOnForwardFailure" option to cause ssh(1) to exit (with a non-zero exit code) when requested port forwardings could not be established. + Extend sshd_config(5) "SubSystem" declarations to allow the specification of command-line arguments. + Replacement of all integer overflow susceptible invocations of malloc(3) and realloc(3) with overflow-checking equivalents. + Many manpage fixes and improvements. + Add optional support for OpenSSL hardware accelerators (engines), enabled using the --with-ssl-engine configure option. + Tokens in configuration files may be double-quoted in order to contain spaces (closes: #319639). + Move a debug() call out of a SIGCHLD handler, fixing a hang when the session exits very quickly (closes: #307890). + Fix some incorrect buffer allocation calculations (closes: #410599). + ssh-add doesn't ask for a passphrase if key file permissions are too liberal (closes: #103677). + Likewise, ssh doesn't ask either (closes: #99675). - 4.6/4.6p1 (http://www.openssh.org/txt/release-4.6): + sshd now allows the enabling and disabling of authentication methods on a per user, group, host and network basis via the Match directive in sshd_config. + Fixed an inconsistent check for a terminal when displaying scp progress meter (closes: #257524). + Fix "hang on exit" when background processes are running at the time of exit on a ttyful/login session (closes: #88337). * Update to current GSSAPI patch from http://www.sxw.org.uk/computing/patches/openssh-4.6p1-gsskex-20070312.patch; install ChangeLog.gssapi.
2006-10-24 - markus@cvs.openbsd.org 2006/10/10 10:12:45Damien Miller
[sshconnect.c] sleep before retrying (not after) since sleep changes errno; fixes pr 5250; rad@twig.com; ok dtucker djm
2006-09-02 - (dtucker) [ssh-keyscan.c ssh-rand-helper.c ssh.c sshconnect.cDarren Tucker
openbsd-compat/bindresvport.c openbsd-compat/getrrsetbyname.c openbsd-compat/port-tun.c openbsd-compat/rresvport.c] Include <arpa/inet.h> for hton* and ntoh* macros. Required on (at least) HP-UX since we define _XOPEN_SOURCE_EXTENDED. Found by santhi.amirta at gmail com.
2006-09-01 - (djm) [audit-bsm.c audit.c auth-bsdauth.c auth-chall.c auth-pam.c]Damien Miller
[auth-rsa.c auth-shadow.c auth-sia.c auth1.c auth2-chall.c] [auth2-gss.c auth2-kbdint.c auth2-none.c authfd.c authfile.c] [cipher-3des1.c cipher-aes.c cipher-bf1.c cipher-ctr.c clientloop.c] [dh.c dns.c entropy.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c loginrec.c mac.c] [md5crypt.c monitor.c monitor_wrap.c readconf.c rsa.c] [scard-opensc.c scard.c session.c ssh-add.c ssh-agent.c ssh-dss.c] [ssh-keygen.c ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c rc4.diff] [openbsd-compat/bsd-cray.c openbsd-compat/port-aix.c] [openbsd-compat/port-linux.c openbsd-compat/port-solaris.c] [openbsd-compat/port-uw.c] Lots of headers for SCO OSR6, mainly adding stdarg.h for log.h; compile problems reported by rac AT tenzing.org
2006-08-05 - deraadt@cvs.openbsd.org 2006/08/03 03:34:42Damien Miller
[OVERVIEW atomicio.c atomicio.h auth-bsdauth.c auth-chall.c auth-krb5.c] [auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c] [auth-rsa.c auth-skey.c auth.c auth.h auth1.c auth2-chall.c auth2-gss.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c ] [auth2-pubkey.c auth2.c authfd.c authfd.h authfile.c bufaux.c bufbn.c] [buffer.c buffer.h canohost.c channels.c channels.h cipher-3des1.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c dns.h fatal.c groupaccess.c] [groupaccess.h gss-genr.c gss-serv-krb5.c gss-serv.c hostfile.c kex.c] [kex.h kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c] [key.h log.c log.h mac.c match.c md-sha256.c misc.c misc.h moduli.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_mm.h monitor_wrap.c] [monitor_wrap.h msg.c nchan.c packet.c progressmeter.c readconf.c] [readconf.h readpass.c rsa.c scard.c scard.h scp.c servconf.c servconf.h] [serverloop.c session.c session.h sftp-client.c sftp-common.c] [sftp-common.h sftp-glob.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-dss.c ssh-gss.h ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rsa.c] [ssh.c ssh.h sshconnect.c sshconnect.h sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshlogin.h sshpty.c sshpty.h sshtty.c ttymodes.c] [uidswap.c uidswap.h uuencode.c uuencode.h xmalloc.c xmalloc.h] [loginrec.c loginrec.h openbsd-compat/port-aix.c openbsd-compat/port-tun.h] almost entirely get rid of the culture of ".h files that include .h files" ok djm, sort of ok stevesk makes the pain stop in one easy step NB. portable commit contains everything *except* removing includes.h, as that will take a fair bit more work as we move headers that are required for portability workarounds to defines.h. (also, this step wasn't "easy")
2006-08-05 - stevesk@cvs.openbsd.org 2006/08/01 23:22:48Damien Miller
[auth-passwd.c auth-rhosts.c auth-rsa.c auth.c auth.h auth1.c] [auth2-chall.c auth2-pubkey.c authfile.c buffer.c canohost.c] [channels.c clientloop.c dh.c dns.c dns.h hostfile.c kex.c kexdhc.c] [kexgexc.c kexgexs.c key.c key.h log.c misc.c misc.h moduli.c] [monitor_wrap.c packet.c progressmeter.c readconf.c readpass.c scp.c] [servconf.c session.c sftp-client.c sftp-common.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh.c sshconnect.c] [sshconnect1.c sshconnect2.c sshd.c sshlogin.c sshtty.c uuencode.c] [uuencode.h xmalloc.c] move #include <stdio.h> out of includes.h
2006-08-05 - dtucker@cvs.openbsd.org 2006/08/01 11:34:36Damien Miller
[sshconnect.c] Allow fallback to known_hosts entries without port qualifiers for non-standard ports too, so that all existing known_hosts entries will be recognised. Requested by, feedback and ok markus@
2006-08-05 - stevesk@cvs.openbsd.org 2006/07/26 13:57:17Damien Miller
[authfd.c authfile.c dh.c canohost.c channels.c clientloop.c compat.c] [hostfile.c kex.c log.c misc.c moduli.c monitor.c packet.c readpass.c] [scp.c servconf.c session.c sftp-server.c sftp.c ssh-add.c ssh-agent.c] [ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c sshconnect.c] [sshconnect1.c sshd.c xmalloc.c] move #include <stdlib.h> out of includes.h
2006-08-05 - stevesk@cvs.openbsd.org 2006/07/25 02:59:21Damien Miller
[channels.c clientloop.c packet.c scp.c serverloop.c sftp-client.c] [sftp-server.c ssh-agent.c ssh-keyscan.c sshconnect.c sshd.c] move #include <sys/time.h> out of includes.h
2006-08-05 - stevesk@cvs.openbsd.org 2006/07/24 13:58:22Damien Miller
[sshconnect.c] disable tunnel forwarding when no strict host key checking and key changed; ok djm@ markus@ dtucker@
2006-07-24 - (djm) [acss.c auth-krb5.c auth-options.c auth-pam.c auth-shadow.c]Damien Miller
[canohost.c channels.c cipher-acss.c defines.h dns.c gss-genr.c] [gss-serv-krb5.c gss-serv.c log.h loginrec.c logintest.c readconf.c] [servconf.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh-rand-helper.c] [ssh.c sshconnect.c sshd.c openbsd-compat/bindresvport.c] [openbsd-compat/bsd-arc4random.c openbsd-compat/bsd-misc.c] [openbsd-compat/getrrsetbyname.c openbsd-compat/glob.c] [openbsd-compat/mktemp.c openbsd-compat/port-linux.c] [openbsd-compat/port-tun.c openbsd-compat/readpassphrase.c] [openbsd-compat/setproctitle.c openbsd-compat/xmmap.c] make the portable tree compile again - sprinkle unistd.h and string.h back in. Don't redefine __unused, as it turned out to be used in headers on Linux, and replace its use in auth-pam.c with ARGSUSED
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/22 20:48:23Damien Miller
[atomicio.c auth-options.c auth-passwd.c auth-rhosts.c auth-rsa.c] [auth.c auth1.c auth2-chall.c auth2-hostbased.c auth2-passwd.c auth2.c] [authfd.c authfile.c bufaux.c bufbn.c buffer.c canohost.c channels.c] [cipher-3des1.c cipher-bf1.c cipher-ctr.c cipher.c clientloop.c] [compat.c deattack.c dh.c dns.c gss-genr.c gss-serv.c hostfile.c] [includes.h kex.c kexdhc.c kexdhs.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c moduli.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c rsa.c] [progressmeter.c readconf.c readpass.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c sshconnect2.c] [sshd.c sshlogin.c sshpty.c ttymodes.c uidswap.c xmalloc.c] move #include <string.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/17 01:31:10Damien Miller
[authfd.c authfile.c channels.c cleanup.c clientloop.c groupaccess.c] [includes.h log.c misc.c msg.c packet.c progressmeter.c readconf.c] [readpass.c scp.c servconf.c sftp-client.c sftp-server.c sftp.c] [ssh-add.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c ssh.c] [sshconnect.c sshlogin.c sshpty.c uidswap.c] move #include <unistd.h> out of includes.h
2006-07-24 - stevesk@cvs.openbsd.org 2006/07/12 22:28:52Damien Miller
[auth-options.c canohost.c channels.c includes.h readconf.c servconf.c ssh-keyscan.c ssh.c sshconnect.c sshd.c] move #include <netdb.h> out of includes.h; ok djm@
2006-07-12 - stevesk@cvs.openbsd.org 2006/07/11 20:07:25Darren Tucker
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c] move #include <errno.h> out of includes.h; ok markus@
2006-07-10 - dtucker@cvs.openbsd.org 2006/07/10 12:46:51Darren Tucker
[misc.c misc.h sshd.8 sshconnect.c] Add port identifier to known_hosts for non-default ports, based originally on a patch from Devin Nate in bz#910. For any connection using the default port or using a HostKeyAlias the format is unchanged, otherwise the host name or address is enclosed within square brackets in the same format as sshd's ListenAddress. Tested by many, ok markus@.
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/06 16:03:53Damien Miller
[auth-options.c auth-options.h auth-passwd.c auth-rh-rsa.c] [auth-rhosts.c auth-rsa.c auth.c auth.h auth2-hostbased.c] [auth2-pubkey.c auth2.c includes.h misc.c misc.h monitor.c] [monitor_wrap.c monitor_wrap.h scp.c serverloop.c session.c] [session.h sftp-common.c ssh-add.c ssh-keygen.c ssh-keysign.c] [ssh.c sshconnect.c sshconnect.h sshd.c sshpty.c sshpty.h uidswap.c] [uidswap.h] move #include <pwd.h> out of includes.h; ok markus@
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/05 02:42:09Damien Miller
[canohost.c hostfile.c includes.h misc.c packet.c readconf.c] [serverloop.c sshconnect.c uuencode.c] move #include <netinet/in.h> out of includes.h; ok deraadt@ (also ssh-rand-helper.c logintest.c loginrec.c)
2006-07-10 - stevesk@cvs.openbsd.org 2006/07/03 08:54:20Damien Miller
[includes.h ssh.c sshconnect.c sshd.c] move #include "version.h" out of includes.h; ok markus@
2006-07-10 - OpenBSD CVS SyncDamien Miller
- djm@cvs.openbsd.org 2006/06/14 10:50:42 [sshconnect.c] limit the number of pre-banner characters we will accept; ok markus@
2006-06-13 - markus@cvs.openbsd.org 2006/06/08 14:45:49Damien Miller
[readpass.c sshconnect.c sshconnect2.c uidswap.c uidswap.h] do not set the gid, noted by solar; ok djm
2006-06-13 - markus@cvs.openbsd.org 2006/06/06 10:20:20Damien Miller
[readpass.c sshconnect.c sshconnect.h sshconnect2.c uidswap.c] replace remaining setuid() calls with permanently_set_uid() and check seteuid() return values; report Marcus Meissner; ok dtucker djm
2006-06-13 - markus@cvs.openbsd.org 2006/05/17 12:43:34Damien Miller
[scp.c sftp.c ssh-agent.c ssh-keygen.c sshconnect.c] fix leak; coverity via Kylene Jo Hall
2006-05-12Merge 4.3p2 to the trunk.Colin Watson
2006-04-23 - markus@cvs.openbsd.org 2006/04/20 09:47:59Damien Miller
[sshconnect.c] simplify; ok djm@
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 13:17:03Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c] [auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c] [auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c] [auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c] [buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c] [cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c] [deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c] [kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c] [mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c] [monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c] [readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c] [session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c] [sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c] [ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c] Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that Theo nuked - our scripts to sync -portable need them in the files
2006-03-26 - djm@cvs.openbsd.org 2006/03/25 00:05:41Damien Miller
[auth-bsdauth.c auth-skey.c auth.c auth2-chall.c channels.c] [clientloop.c deattack.c gss-genr.c kex.c key.c misc.c moduli.c] [monitor.c monitor_wrap.c packet.c scard.c sftp-server.c ssh-agent.c] [ssh-keyscan.c ssh.c sshconnect.c sshconnect2.c sshd.c uuencode.c] [xmalloc.c xmalloc.h] introduce xcalloc() and xasprintf() failure-checked allocations functions and use them throughout openssh xcalloc is particularly important because malloc(nmemb * size) is a dangerous idiom (subject to integer overflow) and it is time for it to die feedback and ok deraadt@
2006-03-26 - deraadt@cvs.openbsd.org 2006/03/20 18:42:27Damien Miller
[canohost.c match.c ssh.c sshconnect.c] be strict with tolower() casting
2006-03-26 - deraadt@cvs.openbsd.org 2006/03/19 18:51:18Damien Miller
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c] [auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c] [auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c] [auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c] [auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c] [canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c] [cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c] [compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c] [groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c] [kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c] [loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c] [monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c] [nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c] [scard.c scp.c servconf.c serverloop.c session.c sftp-client.c] [sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c] [ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c] [ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c] [sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c] [uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c] [openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c] [openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c] [openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c] [openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c] RCSID() can die
2006-03-15 - (djm) [auth-pam.c clientloop.c includes.h monitor.c session.c]Damien Miller
[sftp-client.c ssh-keysign.c ssh.c sshconnect.c sshconnect2.c] [sshd.c openbsd-compat/bsd-misc.c openbsd-compat/bsd-openpty.c] [openbsd-compat/glob.c openbsd-compat/mktemp.c] [openbsd-compat/readpassphrase.c] Lots of include fixes for OpenSolaris
2006-03-15 - stevesk@cvs.openbsd.org 2006/02/22 00:04:45Damien Miller
[canohost.c clientloop.c includes.h match.c readconf.c scp.c ssh.c] [sshconnect.c] move #include <ctype.h> out of includes.h; ok djm@