Age | Commit message (Collapse) | Author |
|
configure.ac defines.h gss-serv-krb5.c session.c ssh-gss.h sshconnect1.c
sshconnect2.c] Add Portable GSSAPI support, patch by Simon Wilkinson.
|
|
[auth1.c readconf.c readconf.h servconf.c servconf.h ssh.c ssh_config
ssh_config.5 sshconnect1.c sshd.8 sshd.c sshd_config sshd_config.5]
remove RhostsAuthentication; suggested by djm@ before; ok djm@, deraadt@,
fgsch@, miod@, henning@, jakob@ and others
|
|
- markus@cvs.openbsd.org 2003/07/22 13:35:22
[auth1.c auth.h auth-passwd.c monitor.c monitor.h monitor_wrap.c
monitor_wrap.h readconf.c readconf.h servconf.c servconf.h session.c ssh.1
ssh.c ssh_config.5 sshconnect1.c sshd.c sshd_config.5 ssh.h]
remove (already disabled) KRB4/AFS support, re-enable -k in ssh(1);
test+ok henning@
- (dtucker) [Makefile.in acconfig.h configure.ac] Remove KRB4/AFS support.
- (dtucker) [auth-krb4.c radix.c radix.h] Remove KRB4/AFS specific files.
I hope I got this right....
|
|
|
|
|
|
[sshconnect1.c]
Use & to test if bits are set, not &&; markus@ ok.
|
|
[authfile.c authfile.h pathnames.h ssh.c sshconnect.c sshconnect.h
sshconnect1.c sshconnect2.c ssh-keysign.8 ssh-keysign.c Makefile.in]
add /usr/libexec/ssh-keysign: a setuid helper program for hostbased
authentication in protocol v2 (needs to access the hostkeys).
Note: Makefile.in untested. Will test after merge is finished.
|
|
[sshconnect1.c]
spelling in error message; ok markus@
|
|
|
|
[sshconnect1.c]
don't trust size sent by (rogue) server; noted by s.esser@e-matters.de
|
|
[sshconnect1.c]
include md5.h, not evp.h
|
|
[auth1.c auth-rsa.c channels.c dispatch.c kex.c kexdh.c kexgex.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshconnect2.c sshd.c]
packet_read* no longer return the packet length, since it's not used.
|
|
[auth1.c kexdh.c kexgex.c packet.c packet.h sshconnect1.c sshd.c]
packet_get_bignum* no longer returns a size
|
|
[auth1.c auth-rsa.c channels.c clientloop.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshd.c ttymodes.c]
get rid of packet_integrity_check, use packet_done() instead.
|
|
[auth1.c auth-rsa.c channels.c clientloop.c packet.c packet.h serverloop.c session.c ssh.c sshconnect1.c sshd.c ttymodes.c]
get rid of packet_integrity_check, use packet_done() instead.
|
|
[auth1.c authfile.c auth-rsa.c dh.c kexdh.c kexgex.c key.c rsa.c scard.c ssh-agent.c sshconnect1.c sshd.c ssh-dss.c]
call fatal() for openssl allocation failures
|
|
[auth1.c auth2.c auth2-chall.c auth-bsdauth.c auth.c authfile.c auth.h]
[auth-krb4.c auth-rhosts.c auth-skey.c bufaux.c canohost.c channels.c]
[cipher.c clientloop.c compat.c compress.c deattack.c key.c log.c mac.c]
[match.c misc.c nchan.c packet.c readconf.c rijndael.c rijndael.h scard.c]
[servconf.c servconf.h serverloop.c session.c sftp.c sftp-client.c]
[sftp-glob.c sftp-int.c sftp-server.c ssh-add.c ssh-agent.c ssh.c]
[sshconnect1.c sshconnect2.c sshconnect.c sshd.8 sshd.c sshd_config]
[ssh-keygen.c sshlogin.c sshpty.c sshtty.c ttymodes.c uidswap.c]
basic KNF done while i was looking for something else
|
|
[sshconnect1.c sshconnect2.c sshconnect.c]
unify hostkey check error messages, simplify prompt.
|
|
[auth2.c auth2-chall.c sshconnect1.c]
typos; from solar
|
|
- stevesk@cvs.openbsd.org 2001/07/05 20:32:47
[sshconnect1.c]
statement after label; ok dugsong@
|
|
issue warning (line 1: tokens ignored at end of directive line)
- (tim) [sshconnect1.c] give the compiler something to do for success:
if KRB5 and AFS are not defined.
(ERROR: "sshconnect1.c", line 1274: Syntax error before or at: })
|
|
[key.c key.h ssh.c sshconnect1.c sshconnect2.c]
add smartcard support to the client, too (now you can use both
the agent and the client).
|
|
[auth1.c auth.h auth-krb4.c auth-passwd.c readconf.c readconf.h
servconf.c servconf.h session.c sshconnect1.c sshd.c]
Kerberos v5 support for SSH1, mostly from Assar Westerlund
<assar@freebsd.org> and Bjorn Gronvall <bg@sics.se>. markus@ ok
|
|
[sshconnect1.c]
consistent with ssh2: skip key if empty passphrase is entered,
retry num_of_passwd_prompt times if passphrase is wrong. ok fgsch@
|
|
[auth1.c auth2.c auth2-chall.c authfd.c authfile.c auth-rhosts.c
canohost.c channels.c cipher.c clientloop.c deattack.c dh.c
hostfile.c kex.c kexdh.c kexgex.c key.c nchan.c packet.c radix.c
readpass.c scp.c servconf.c serverloop.c session.c sftp.c
sftp-client.c sftp-glob.c sftp-int.c sftp-server.c ssh-add.c
ssh-agent.c ssh.c sshconnect1.c sshconnect2.c sshconnect.c sshd.c
ssh-keygen.c ssh-keyscan.c]
more strict prototypes. raise warning level in Makefile.inc.
markus ok'ed
TODO; cleanup headers
|
|
[kexdh.c kexgex.c kex.h pathnames.h readconf.c servconf.h ssh.1
sshconnect1.c sshconnect2.c sshconnect.c sshconnect.h sshd.8]
get rid of known_hosts2, use it for hostkey lookup, but do not
modify.
|
|
[authfd.c authfile.c channels.c kexdh.c kexgex.c packet.c ssh.c
sshconnect.c sshconnect1.c]
use xxx_put_cstring()
|
|
[auth-chall.c auth.h auth1.c auth2-chall.c auth2.c readconf.c
readconf.h servconf.c servconf.h sshconnect1.c sshconnect2.c sshd.c]
improved kbd-interactive support. work by per@appgate.com and me
|
|
[sshconnect1.c]
check for key!=NULL, thanks to costa
|
|
[auth-rhosts.c auth.h auth2.c buffer.c canohost.c canohost.h
compat.c compat.h hostfile.c pathnames.h readconf.c readconf.h
servconf.c servconf.h ssh.c sshconnect.c sshconnect.h sshconnect1.c
sshconnect2.c sshd_config]
implement HostbasedAuthentication (= RhostRSAAuthentication for ssh v2)
similar to RhostRSAAuthentication unless you enable (the experimental)
HostbasedUsesNameFromPacketOnly option. please test. :)
|
|
[authfile.c authfile.h ssh-add.c ssh-keygen.c ssh.c sshconnect.c
sshconnect.h sshconnect1.c sshconnect2.c sshd.c]
simpler key load/save interface, see authfile.h
|
|
[compat.c compat.h readconf.h ssh.c sshconnect1.c sshconnect2.c]
implement client side of SSH2_MSG_USERAUTH_PK_OK (test public key ->
no need to do enter passphrase or do expensive sign operations if the
server does not accept key).
|
|
- markus@cvs.openbsd.org 2001/02/15 16:19:59
[channels.c channels.h serverloop.c sshconnect.c sshconnect.h]
[sshconnect1.c sshconnect2.c]
genericize password padding function for SSH1 and SSH2.
add stylized echo to 2, too.
- (djm) Add roundup() macro to defines.h
|
|
[sshconnect1.c]
fix xmalloc(0), ok dugsong@
|
|
[sshconnect1.c sshconnect2.c]
%.30s is too short for IPv6 numeric address. use %.128s for now.
markus ok
|
|
[serverloop.c sshconnect1.c]
mitigate SSH1 traffic analysis - from Solar Designer
<solar@openwall.com>, ok provos@
|
|
sync with netbsd tree changes.
- more strict prototypes, include necessary headers
- use paths.h/pathnames.h decls
- size_t typecase to int -> u_long
|
|
- (djm) OpenBSD CVS sync:
- markus@cvs.openbsd.org 2001/02/03 03:08:38
[auth-options.c auth-rh-rsa.c auth-rhosts.c auth.c canohost.c]
[canohost.h servconf.c servconf.h session.c sshconnect1.c sshd.8]
[sshd_config]
make ReverseMappingCheck optional in sshd_config; ok djm@,dugsong@
- markus@cvs.openbsd.org 2001/02/03 03:19:51
[ssh.1 sshd.8 sshd_config]
Skey is now called ChallengeResponse
- markus@cvs.openbsd.org 2001/02/03 03:43:09
[sshd.8]
use no-pty option in .ssh/authorized_keys* if you need a 8-bit clean
channel. note from Erik.Anggard@cygate.se (pr/1659)
- stevesk@cvs.openbsd.org 2001/02/03 10:03:06
[ssh.1]
typos; ok markus@
- djm@cvs.openbsd.org 2001/02/04 04:11:56
[scp.1 sftp-server.c ssh.1 sshd.8 sftp-client.c sftp-client.h]
[sftp-common.c sftp-common.h sftp-int.c sftp-int.h sftp.1 sftp.c]
Basic interactive sftp client; ok theo@
- (djm) Update RPM specs for new sftp binary
- (djm) Update several bits for new optional reverse lookup stuff. I
think I got them all.
|
|
- markus@cvs.openbsd.org 2001/01/29 12:47:32
[rsa.c rsa.h ssh-agent.c sshconnect1.c sshd.c]
handle rsa_private_decrypt failures; helps against the Bleichenbacher
pkcs#1 attack
|
|
[auth1.c auth2.c readconf.c readconf.h servconf.c servconf.h
sshconnect1.c sshconnect2.c sshd.c]
rename skey -> challenge response.
auto-enable kbd-interactive for ssh2 if challenge-reponse is enabled.
|
|
- markus@cvs.openbsd.org 2001/01/22 8:15:00
[auth-krb4.c sshconnect1.c]
only AFS needs radix.[ch]
- markus@cvs.openbsd.org 2001/01/22 8:32:53
[auth2.c]
no need to include; from mouring@etoh.eviladmin.org
- stevesk@cvs.openbsd.org 2001/01/22 16:55:21
[key.c]
free() -> xfree(); ok markus@
- stevesk@cvs.openbsd.org 2001/01/22 17:22:28
[sshconnect2.c sshd.c]
fix memory leaks in SSH2 key exchange; ok markus@
|
|
Linux and works. So that is at least a good sign. =)
20010122
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/19 12:45:26 GMT 2001 by markus
[servconf.c ssh.h sshd.c]
only auth-chall.c needs #ifdef SKEY
- markus@cvs.openbsd.org 2001/01/19 15:55:10 GMT 2001 by markus
[auth-krb4.c auth-options.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth1.c auth2.c channels.c clientloop.c dh.c dispatch.c nchan.c
packet.c pathname.h readconf.c scp.c servconf.c serverloop.c
session.c ssh-add.c ssh-keygen.c ssh-keyscan.c ssh.c ssh.h
ssh1.h sshconnect1.c sshd.c ttymodes.c]
move ssh1 definitions to ssh1.h, pathnames to pathnames.h
- markus@cvs.openbsd.org 2001/01/19 16:48:14
[sshd.8]
fix typo; from stevesk@
- markus@cvs.openbsd.org 2001/01/19 16:50:58
[ssh-dss.c]
clear and free digest, make consistent with other code (use dlen); from
stevesk@
- markus@cvs.openbsd.org 2001/01/20 15:55:20 GMT 2001 by markus
[auth-options.c auth-options.h auth-rsa.c auth2.c]
pass the filename to auth_parse_options()
- markus@cvs.openbsd.org 2001/01/20 17:59:40 GMT 2001
[readconf.c]
fix SIGSEGV from -o ""; problem noted by jehsom@togetherweb.com
- stevesk@cvs.openbsd.org 2001/01/20 18:20:29
[sshconnect2.c]
dh_new_group() does not return NULL. ok markus@
- markus@cvs.openbsd.org 2001/01/20 21:33:42
[ssh-add.c]
do not loop forever if askpass does not exist; from
andrew@pimlott.ne.mediaone.net
- djm@cvs.openbsd.org 2001/01/20 23:00:56
[servconf.c]
Check for NULL return from strdelim; ok markus
- djm@cvs.openbsd.org 2001/01/20 23:02:07
[readconf.c]
KNF; ok markus
- jakob@cvs.openbsd.org 2001/01/21 9:00:33
[ssh-keygen.1]
remove -R flag; ok markus@
- markus@cvs.openbsd.org 2001/01/21 19:05:40
[atomicio.c automicio.h auth-chall.c auth-krb4.c auth-options.c
auth-options.h auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c
auth.c auth.h auth1.c auth2-chall.c auth2.c authfd.c authfile.c
bufaux.c bufaux.h buffer.c canahost.c canahost.h channels.c
cipher.c cli.c clientloop.c clientloop.h compat.c compress.c
deattack.c dh.c dispatch.c groupaccess.c hmac.c hostfile.c kex.c
key.c key.h log-client.c log-server.c log.c log.h login.c login.h
match.c misc.c misc.h nchan.c packet.c pty.c radix.h readconf.c
readpass.c readpass.h rsa.c scp.c servconf.c serverloop.c serverloop.h
session.c sftp-server.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c
ssh-keyscan.c ssh-rsa.c ssh.c ssh.h sshconnect.c sshconnect.h
sshconnect1.c sshconnect2.c sshd.c tildexpand.c tildexpand.h
ttysmodes.c uidswap.c xmalloc.c]
split ssh.h and try to cleanup the #include mess. remove unnecessary
#includes. rename util.[ch] -> misc.[ch]
- (bal) renamed 'PIDDIR' to '_PATH_SSH_PIDDIR' to match OpenBSD tree
- (bal) Moved #ifdef KRB4 in auth-krb4.c above the #include to resolve
conflict when compiling for non-kerb install
- (bal) removed the #ifdef SKEY in auth1.c to match Markus' changes
on 1/19.
|
|
that I was able to get all the portable bits in the right location. As for
the SKEY comment there is an email out to Markus as to how it should be
resolved. Until then I just #ifdef SKEY/#endif out the whole block.
- (bal) OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/18 16:20:21
[log-client.c log-server.c log.c readconf.c servconf.c ssh.1 ssh.h
sshd.8 sshd.c]
log() is at pri=LOG_INFO, since LOG_NOTICE goes to /dev/console on many
systems
- markus@cvs.openbsd.org 2001/01/18 16:59:59
[auth-passwd.c auth.c auth.h auth1.c auth2.c serverloop.c session.c
session.h sshconnect1.c]
1) removes fake skey from sshd, since this will be much
harder with /usr/libexec/auth/login_XXX
2) share/unify code used in ssh-1 and ssh-2 authentication (server side)
3) make addition of BSD_AUTH and other challenge reponse methods
easier.
- markus@cvs.openbsd.org 2001/01/18 17:12:43
[auth-chall.c auth2-chall.c]
rename *-skey.c *-chall.c since the files are not skey specific
|
|
NEED TO BE GENERATED* =) Refer to to entry "2001/01/16 19:20:06"
for more details.
20010118
- (bal) Super Sized OpenBSD Resync
- markus@cvs.openbsd.org 2001/01/11 22:14:20 GMT 2001 by markus
[sshd.c]
maxfd+1
- markus@cvs.openbsd.org 2001/01/13 17:59:18
[ssh-keygen.1]
small ssh-keygen manpage cleanup; stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:03:07
[scp.c ssh-keygen.c sshd.c]
getopt() returns -1 not EOF; stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:06:54
[ssh-keyscan.c]
use SSH_DEFAULT_PORT; from stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:12:47
[ssh-keyscan.c]
free() -> xfree(); fix memory leak; from stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/13 18:14:13
[ssh-add.c]
typo, from stevesk@sweden.hp.com
- markus@cvs.openbsd.org 2001/01/13 18:32:50
[packet.c session.c ssh.c sshconnect.c sshd.c]
split out keepalive from packet_interactive (from dale@accentre.com)
set IPTOS_LOWDELAY TCP_NODELAY IPTOS_THROUGHPUT for ssh2, too.
- markus@cvs.openbsd.org 2001/01/13 18:36:45
[packet.c packet.h]
reorder, typo
- markus@cvs.openbsd.org 2001/01/13 18:38:00
[auth-options.c]
fix comment
- markus@cvs.openbsd.org 2001/01/13 18:43:31
[session.c]
Wall
- markus@cvs.openbsd.org 2001/01/13 19:14:08
[clientloop.h clientloop.c ssh.c]
move callback to headerfile
- markus@cvs.openbsd.org 2001/01/15 21:40:10
[ssh.c]
use log() instead of stderr
- markus@cvs.openbsd.org 2001/01/15 21:43:51
[dh.c]
use error() not stderr!
- markus@cvs.openbsd.org 2001/01/15 21:45:29
[sftp-server.c]
rename must fail if newpath exists, debug off by default
- markus@cvs.openbsd.org 2001/01/15 21:46:38
[sftp-server.c]
readable long listing for sftp-server, ok deraadt@
- markus@cvs.openbsd.org 2001/01/16 19:20:06
[key.c ssh-rsa.c]
make "ssh-rsa" key format for ssh2 confirm to the ietf-drafts; from
galb@vandyke.com. note that you have to delete older ssh2-rsa keys,
since they are in the wrong format, too. they must be removed from
.ssh/authorized_keys2 and .ssh/known_hosts2, etc.
(cd; grep -v ssh-rsa .ssh/authorized_keys2 > TMP && mv TMP
.ssh/authorized_keys2) additionally, we now check that
BN_num_bits(rsa->n) >= 768.
- markus@cvs.openbsd.org 2001/01/16 20:54:27
[sftp-server.c]
remove some statics. simpler handles; idea from nisse@lysator.liu.se
- deraadt@cvs.openbsd.org 2001/01/16 23:58:08
[bufaux.c radix.c sshconnect.h sshconnect1.c]
indent
- (bal) Added bsd-strmode.[ch] since some non-OpenBSD platforms may
be missing such feature.
|
|
- markus@cvs.openbsd.org 2001/01/08 22:29:05
[auth2.c compat.c compat.h servconf.c servconf.h sshd.8
sshd_config version.h]
implement option 'Banner /etc/issue.net' for ssh2, move version to
2.3.1 (needed for bugcompat detection, 2.3.0 would fail if Banner
is enabled).
- markus@cvs.openbsd.org 2001/01/08 22:03:23
[channels.c ssh-keyscan.c]
O_NDELAY -> O_NONBLOCK; thanks stevesk@pobox.com
- markus@cvs.openbsd.org 2001/01/08 21:55:41
[sshconnect1.c]
more cleanups and fixes from stevesk@pobox.com:
1) try_agent_authentication() for loop will overwrite key just
allocated with key_new(); don't alloc
2) call ssh_close_authentication_connection() before exit
try_agent_authentication()
3) free mem on bad passphrase in try_rsa_authentication()
- markus@cvs.openbsd.org 2001/01/08 21:48:17
[kex.c]
missing free; thanks stevesk@pobox.com
|
|
And I think I have all the bits right from the OpenBSD tree.
20001222
- Updated RCSID for pty.c
- (bal) OpenBSD CVS Updates:
- markus@cvs.openbsd.org 2000/12/21 15:10:16
[auth-rh-rsa.c hostfile.c hostfile.h sshconnect.c]
print keyfile:line for changed hostkeys, for deraadt@, ok deraadt@
- markus@cvs.openbsd.org 2000/12/20 19:26:56
[authfile.c]
allow ssh -i userkey for root
- markus@cvs.openbsd.org 2000/12/20 19:37:21
[authfd.c authfd.h kex.c sshconnect2.c sshd.c uidswap.c uidswap.h]
fix prototypes; from stevesk@pobox.com
- markus@cvs.openbsd.org 2000/12/20 19:32:08
[sshd.c]
init pointer to NULL; report from Jan.Ivan@cern.ch
- markus@cvs.openbsd.org 2000/12/19 23:17:54
[auth-krb4.c auth-options.c auth-options.h auth-rhosts.c auth-rsa.c
auth1.c auth2-skey.c auth2.c authfd.c authfd.h authfile.c bufaux.c
bufaux.h buffer.c canohost.c channels.c clientloop.c compress.c
crc32.c deattack.c getput.h hmac.c hmac.h hostfile.c kex.c kex.h
key.c key.h log.c login.c match.c match.h mpaux.c mpaux.h packet.c
packet.h radix.c readconf.c rsa.c scp.c servconf.c servconf.h
serverloop.c session.c sftp-server.c ssh-agent.c ssh-dss.c ssh-dss.h
ssh-keygen.c ssh-keyscan.c ssh-rsa.c ssh-rsa.h ssh.c ssh.h uuencode.c
uuencode.h sshconnect1.c sshconnect2.c sshd.c tildexpand.c]
replace 'unsigned bla' with 'u_bla' everywhere. also replace 'char
unsigned' with u_char.
|
|
- markus@cvs.openbsd.org 2000/12/10 17:01:53
[sshconnect1.c]
always request new challenge for skey/tis-auth, fixes interop with
other implementations; report from roth@feep.net
|
|
- provos@cvs.openbsd.org 2000/11/22 08:38:31
[sshd.8]
talk about /etc/primes, okay markus@
- markus@cvs.openbsd.org 2000/11/23 14:03:48
[ssh.c sshconnect1.c sshconnect2.c]
complain about invalid ciphers for ssh1/ssh2, fall back to reasonable
defaults
- markus@cvs.openbsd.org 2000/11/25 09:42:53
[sshconnect1.c]
reorder check for illegal ciphers, bugreport from espie@
- markus@cvs.openbsd.org 2000/11/25 10:19:34
[ssh-keygen.c ssh.h]
print keytype when generating a key.
reasonable defaults for RSA1/RSA/DSA keys.
|
|
- markus@cvs.openbsd.org 2000/11/06 16:04:56
[channels.c channels.h clientloop.c nchan.c serverloop.c]
[session.c ssh.c]
agent forwarding and -R for ssh2, based on work from
jhuuskon@messi.uku.fi
- markus@cvs.openbsd.org 2000/11/06 16:13:27
[ssh.c sshconnect.c sshd.c]
do not disabled rhosts(rsa) if server port > 1024; from
pekkas@netcore.fi
- markus@cvs.openbsd.org 2000/11/06 16:16:35
[sshconnect.c]
downgrade client to 1.3 if server is 1.4; help from mdb@juniper.net
- markus@cvs.openbsd.org 2000/11/09 18:04:40
[auth1.c]
typo; from mouring@pconline.com
- markus@cvs.openbsd.org 2000/11/12 12:03:28
[ssh-agent.c]
off-by-one when removing a key from the agent
- markus@cvs.openbsd.org 2000/11/12 12:50:39
[auth-rh-rsa.c auth2.c authfd.c authfd.h]
[authfile.c hostfile.c kex.c kex.h key.c key.h myproposal.h]
[readconf.c readconf.h rsa.c rsa.h servconf.c servconf.h ssh-add.c]
[ssh-agent.c ssh-keygen.1 ssh-keygen.c ssh.1 ssh.c ssh_config]
[sshconnect1.c sshconnect2.c sshd.8 sshd.c sshd_config ssh-dss.c]
[ssh-dss.h ssh-rsa.c ssh-rsa.h dsa.c dsa.h]
add support for RSA to SSH2. please test.
there are now 3 types of keys: RSA1 is used by ssh-1 only,
RSA and DSA are used by SSH2.
you can use 'ssh-keygen -t rsa -f ssh2_rsa_file' to generate RSA
keys for SSH2 and use the RSA keys for hostkeys or for user keys.
SSH2 RSA or DSA keys are added to .ssh/authorised_keys2 as before.
- (djm) Fix up Makefile and Redhat init script to create RSA host keys
- (djm) Change to interim version
|
|
- markus@cvs.openbsd.org 2000/09/30 10:27:44
[log.c]
allow loglevel debug
- markus@cvs.openbsd.org 2000/10/03 11:59:57
[packet.c]
hmac->mac
- markus@cvs.openbsd.org 2000/10/03 12:03:03
[auth-krb4.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth1.c]
move fake-auth from auth1.c to individual auth methods, disables s/key in
debug-msg
- markus@cvs.openbsd.org 2000/10/03 12:16:48
ssh.c
do not resolve canonname, i have no idea why this was added oin ossh
- markus@cvs.openbsd.org 2000/10/09 15:30:44
ssh-keygen.1 ssh-keygen.c
-X now reads private ssh.com DSA keys, too.
- markus@cvs.openbsd.org 2000/10/09 15:32:34
auth-options.c
clear options on every call.
- markus@cvs.openbsd.org 2000/10/09 15:51:00
authfd.c authfd.h
interop with ssh-agent2, from <res@shore.net>
- markus@cvs.openbsd.org 2000/10/10 14:20:45
compat.c
use rexexp for version string matching
- provos@cvs.openbsd.org 2000/10/10 22:02:18
[kex.c kex.h myproposal.h ssh.h ssh2.h sshconnect2.c sshd.c dh.c dh.h]
First rough implementation of the diffie-hellman group exchange. The
client can ask the server for bigger groups to perform the diffie-hellman
in, thus increasing the attack complexity when using ciphers with longer
keys. University of Windsor provided network, T the company.
- markus@cvs.openbsd.org 2000/10/11 13:59:52
[auth-rsa.c auth2.c]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:00:27
[auth-options.h]
clear auth options unless auth sucessfull
- markus@cvs.openbsd.org 2000/10/11 14:03:27
[scp.1 scp.c]
support 'scp -o' with help from mouring@pconline.com
- markus@cvs.openbsd.org 2000/10/11 14:11:35
[dh.c]
Wall
- markus@cvs.openbsd.org 2000/10/11 14:14:40
[auth.h auth2.c readconf.c readconf.h readpass.c servconf.c servconf.h]
[ssh.h sshconnect2.c sshd_config auth2-skey.c cli.c cli.h]
add support for s/key (kbd-interactive) to ssh2, based on work by
mkiernan@avantgo.com and me
- markus@cvs.openbsd.org 2000/10/11 14:27:24
[auth.c auth1.c auth2.c authfile.c cipher.c cipher.h kex.c kex.h]
[myproposal.h packet.c readconf.c session.c ssh.c ssh.h sshconnect1.c]
[sshconnect2.c sshd.c]
new cipher framework
- markus@cvs.openbsd.org 2000/10/11 14:45:21
[cipher.c]
remove DES
- markus@cvs.openbsd.org 2000/10/12 03:59:20
[cipher.c cipher.h sshconnect1.c sshconnect2.c sshd.c]
enable DES in SSH-1 clients only
- markus@cvs.openbsd.org 2000/10/12 08:21:13
[kex.h packet.c]
remove unused
- markus@cvs.openbsd.org 2000/10/13 12:34:46
[sshd.c]
Kludge for F-Secure Macintosh < 1.0.2; appro@fy.chalmers.se
- markus@cvs.openbsd.org 2000/10/13 12:59:15
[cipher.c cipher.h myproposal.h rijndael.c rijndael.h]
rijndael/aes support
- markus@cvs.openbsd.org 2000/10/13 13:10:54
[sshd.8]
more info about -V
- markus@cvs.openbsd.org 2000/10/13 13:12:02
[myproposal.h]
prefer no compression
|