| Age | Commit message (Collapse) | Author |
|---|
|
[scp.c auth.c monitor.c serverloop.c sftp-server.c sshpty.c readpass.c
sshd.c monitor_wrap.c monitor_fdpass.c ssh-agent.c ttymodes.c atomicio.c
includes.h session.c sshlogin.c monitor_mm.c packet.c sshconnect2.c
sftp-client.c nchan.c clientloop.c sftp.c misc.c canohost.c channels.c
ssh-keygen.c progressmeter.c uidswap.c msg.c readconf.c sshconnect.c]
move #include <errno.h> out of includes.h; ok markus@
|
|
[readpass.c sshconnect.c sshconnect2.c uidswap.c uidswap.h]
do not set the gid, noted by solar; ok djm
|
|
[readpass.c sshconnect.c sshconnect.h sshconnect2.c uidswap.c]
replace remaining setuid() calls with permanently_set_uid() and
check seteuid() return values; report Marcus Meissner; ok dtucker djm
|
|
[sshconnect2.c]
uint32_t -> u_int32_t (which we use everywhere else)
(Id sync only - portable already had this)
|
|
[authfile.c authfile.h sshconnect2.c ssh.c sshconnect1.c]
Prevent ssh from trying to open private keys with bad permissions more than
once or prompting for their passphrases (which it subsequently ignores
anyway), similar to a previous change in ssh-add. bz #1186, ok djm@
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-options.c auth-passwd.c]
[auth-rh-rsa.c auth-rhosts.c auth-rsa.c auth-skey.c auth.c auth1.c]
[auth2-chall.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c]
[buffer.c canohost.c channels.c cipher-3des1.c cipher-bf1.c]
[cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c compress.c]
[deattack.c dh.c dispatch.c fatal.c groupaccess.c hostfile.c kex.c]
[kexdh.c kexdhc.c kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c]
[mac.c match.c md-sha256.c misc.c monitor.c monitor_fdpass.c]
[monitor_mm.c monitor_wrap.c msg.c nchan.c packet.c progressmeter.c]
[readconf.c readpass.c rsa.c scard.c scp.c servconf.c serverloop.c]
[session.c sftp-client.c sftp-common.c sftp-glob.c sftp-server.c]
[sftp.c ssh-add.c ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c]
[ssh-keysign.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c]
Put $OpenBSD$ tags back (as comments) to replace the RCSID()s that
Theo nuked - our scripts to sync -portable need them in the files
|
|
[auth-bsdauth.c auth-skey.c auth.c auth2-chall.c channels.c]
[clientloop.c deattack.c gss-genr.c kex.c key.c misc.c moduli.c]
[monitor.c monitor_wrap.c packet.c scard.c sftp-server.c ssh-agent.c]
[ssh-keyscan.c ssh.c sshconnect.c sshconnect2.c sshd.c uuencode.c]
[xmalloc.c xmalloc.h]
introduce xcalloc() and xasprintf() failure-checked allocations
functions and use them throughout openssh
xcalloc is particularly important because malloc(nmemb * size) is a
dangerous idiom (subject to integer overflow) and it is time for it
to die
feedback and ok deraadt@
|
|
[sshconnect2.c]
memory leaks detected by Coverity via elad AT netbsd.org;
deraadt@ ok
|
|
[atomicio.c auth-bsdauth.c auth-chall.c auth-krb5.c auth-options.c]
[auth-pam.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c auth-rsa.c]
[auth-shadow.c auth-skey.c auth.c auth1.c auth2-chall.c]
[auth2-hostbased.c auth2-kbdint.c auth2-none.c auth2-passwd.c]
[auth2-pubkey.c auth2.c authfd.c authfile.c bufaux.c buffer.c]
[canohost.c channels.c cipher-3des1.c cipher-acss.c cipher-aes.c]
[cipher-bf1.c cipher-ctr.c cipher.c cleanup.c clientloop.c compat.c]
[compress.c deattack.c dh.c dispatch.c dns.c entropy.c fatal.c]
[groupaccess.c hostfile.c includes.h kex.c kexdh.c kexdhc.c]
[kexdhs.c kexgex.c kexgexc.c kexgexs.c key.c log.c loginrec.c]
[loginrec.h logintest.c mac.c match.c md-sha256.c md5crypt.c misc.c]
[monitor.c monitor_fdpass.c monitor_mm.c monitor_wrap.c msg.c]
[nchan.c packet.c progressmeter.c readconf.c readpass.c rsa.c]
[scard.c scp.c servconf.c serverloop.c session.c sftp-client.c]
[sftp-common.c sftp-glob.c sftp-server.c sftp.c ssh-add.c]
[ssh-agent.c ssh-dss.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-rand-helper.c ssh-rsa.c ssh.c sshconnect.c sshconnect1.c]
[sshconnect2.c sshd.c sshlogin.c sshpty.c sshtty.c ttymodes.c]
[uidswap.c uuencode.c xmalloc.c openbsd-compat/bsd-arc4random.c]
[openbsd-compat/bsd-closefrom.c openbsd-compat/bsd-cygwin_util.c]
[openbsd-compat/bsd-getpeereid.c openbsd-compat/bsd-misc.c]
[openbsd-compat/bsd-nextstep.c openbsd-compat/bsd-snprintf.c]
[openbsd-compat/bsd-waitpid.c openbsd-compat/fake-rfc2553.c]
RCSID() can die
|
|
[sftp-client.c ssh-keysign.c ssh.c sshconnect.c sshconnect2.c]
[sshd.c openbsd-compat/bsd-misc.c openbsd-compat/bsd-openpty.c]
[openbsd-compat/glob.c openbsd-compat/mktemp.c]
[openbsd-compat/readpassphrase.c] Lots of include fixes for
OpenSolaris
|
|
[kex.c kex.h monitor.c myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
Implement the diffie-hellman-group-exchange-sha256 key exchange method
using the SHA256 code in libc (and wrapper to make it into an OpenSSL
EVP), interop tested against CVS PuTTY
NB. no portability bits committed yet
|
|
[clientloop.c includes.h monitor.c progressmeter.c scp.c]
[serverloop.c session.c sftp.c ssh-agent.c ssh.c sshd.c]
move #include <signal.h> out of includes.h; ok markus@
|
|
[includes.h monitor.c readpass.c scp.c serverloop.c session.c^?]
[sftp.c sshconnect.c sshconnect2.c sshd.c]
move #include <sys/wait.h> out of includes.h; ok markus@
|
|
[includes.h ssh-agent.c ssh-keyscan.c sshconnect2.c]
move #include <sys/queue.h> out of includes.h; ok markus@
|
|
[ssh-keygen.c ssh.c sshconnect2.c]
no trailing "\n" for log functions; ok djm@
|
|
- djm@cvs.openbsd.org 2005/08/30 22:08:05
[gss-serv.c sshconnect2.c]
destroy credentials if krb5_kuserok() call fails. Stops credentials being
delegated to users who are not authorised for GSSAPIAuthentication when
GSSAPIDeletegateCredentials=yes and another authentication mechanism
succeeds; bz#1073 reported by paul.moore AT centrify.com, fix by
simon AT sxw.org.uk, tested todd@ biorn@ jakob@; ok deraadt@
|
|
[kex.c kex.h myproposal.h packet.c packet.h servconf.c session.c]
[sshconnect2.c sshd.c sshd_config sshd_config.5]
add a new compression method that delays compression until the user
has been authenticated successfully and set compression to 'delayed'
for sshd.
this breaks older openssh clients (< 3.5) if they insist on
compression, so you have to re-enable compression in sshd_config.
ok djm@
|
|
[auth-rh-rsa.c auth-rhosts.c auth2-chall.c auth2-gss.c channels.c]
[cipher-ctr.c gss-genr.c gss-serv.c kex.c moduli.c readconf.c]
[serverloop.c session.c sftp-client.c sftp.c ssh-add.c ssh-keygen.c]
[sshconnect.c sshconnect2.c]
knf says that a 2nd level indent is four (not three or five) spaces
|
|
[auth-rsa.c auth.c auth1.c auth2-chall.c auth2-gss.c authfd.c authfile.c]
[bufaux.c canohost.c channels.c cipher.c clientloop.c dns.c gss-serv.c]
[kex.c kex.h key.c mac.c match.c misc.c packet.c packet.h scp.c]
[servconf.c session.c session.h sftp-client.c sftp-server.c sftp.c]
[ssh-keyscan.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
make this -Wsign-compare clean; ok avsm@ markus@
NB. auth1.c changes not committed yet (conflicts with uncommitted sync)
NB2. more work may be needed to make portable Wsign-compare clean
|
|
[dh.c dh.h kex.c kex.h kexdhc.c kexdhs.c monitor.c myproposal.h]
[ssh-keyscan.c sshconnect2.c sshd.c]
implement diffie-hellman-group14-sha1 kex method (trivial extension to
existing diffie-hellman-group1-sha1); ok markus@
|
|
[clientloop.c misc.h readpass.c scard.c ssh-add.c ssh-agent.c ssh-keygen.c
sshconnect.c sshconnect1.c sshconnect2.c] removed: readpass.h
kill a tiny header; ok deraadt@
|
|
- henning@cvs.openbsd.org 2004/04/08 16:08:21
[sshconnect2.c]
swap the last two parameters to TAILQ_FOREACH_REVERSE. matches what FreeBSD and NetBSD do.
ok millert@ mcbride@ markus@ ho@, checked to not affect ports by naddy@
|
|
[readconf.c readconf.h scp.1 sftp.1 ssh.1 ssh_config.5 sshconnect2.c]
add IdentitiesOnly; ok djm@, pb@
|
|
[auth2-hostbased.c auth2-pubkey.c serverloop.c ssh-keysign.c sshconnect2.c]
fix mem leaks; some fixes from Pete Flugstad; tested dtucker@
|
|
|
|
[everything]
unexpand and delete whitespace at EOL; ok markus@
(done locally and RCS IDs synced)
|
|
[auth2-gss.c gss-genr.c gss-serv.c monitor.c monitor.h monitor_wrap.c]
[monitor_wrap.h sshconnect2.c ssh-gss.h]
replace "gssapi" with "gssapi-with-mic"; from Simon Wilkinson;
test + ok jakob.
|
|
[msg.c msg.h sshconnect2.c ssh-keysign.c]
return error on msg send/receive failure (rather than fatal); ok markus@
|
|
[sshconnect2.c]
cleanup and minor fixes for the client code; from Simon Wilkinson
|
|
[auth2-gss.c compat.c compat.h sshconnect2.c]
remove support for SSH_BUG_GSSAPI_BER; simon@sxw.org.uk
|
|
[sshconnect2.c]
rename 'supported' static var in userauth_gssapi() to 'gss_supported'
to avoid shadowing the global version. markus@ ok
|
|
[sshconnect2.c]
search keys in reverse order; fixes #684
|
|
[sshconnect2.c]
set ptr to NULL after free
|
|
[sshconnect2.c]
Don't use logit for banner, since it truncates to MSGBUFSIZ; bz #668 & #707.
ok markus@
|
|
[sshconnect2.c]
fprintf->logit to silence login banner with "ssh -q"; ok markus@
|
|
[monitor.c monitor_wrap.c sshconnect2.c]
64 bit cleanups; markus ok
|
|
[sshconnect2.c]
remove support for "kerberos-2@ssh.com"
|
|
configure.ac defines.h gss-serv-krb5.c session.c ssh-gss.h sshconnect1.c
sshconnect2.c] Add Portable GSSAPI support, patch by Simon Wilkinson.
|
|
[auth2.c auth2-gss.c auth.h compat.c compat.h gss-genr.c gss-serv-krb5.c
gss-serv.c monitor.c monitor.h monitor_wrap.c monitor_wrap.h readconf.c
readconf.h servconf.c servconf.h session.c session.h ssh-gss.h
ssh_config.5 sshconnect2.c sshd_config sshd_config.5]
support GSS API user authentication; patches from Simon Wilkinson,
stripped down and tested by Jakob and myself.
|
|
[auth2-hostbased.c auth2-pubkey.c auth2.c channels.c key.c key.h
monitor.c packet.c packet.h serverloop.c sshconnect2.c sshd.c]
int -> u_int; ok djm@, deraadt@, mouring@
|
|
[sshconnect2.c]
cleanup unregister of per-method packet handlers; ok djm@
|
|
|
|
|
|
[auth2.c monitor.c sshconnect2.c auth2-krb5.c]
implement kerberos over ssh2 ("kerberos-2@ssh.com"); tested with jakob@
server interops with commercial client; ok jakob@ djm@
|
|
[sshconnect2.c]
for pubkey authentication try the user keys in the following order:
1. agent keys that are found in the config file
2. other agent keys
3. keys that are only listed in the config file
this helps when an agent has many keys, where the server might
close the connection before the correct key is used. report & ok pb@
|
|
|
|
|
|
- markus@cvs.openbsd.org 2003/04/02 09:48:07
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
reapply rekeying chage, tested by henning@, ok djm@
|
|
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
rekeying bugfixes and automatic rekeying:
* both client and server rekey _automatically_
(a) after 2^31 packets, because after 2^32 packets
the sequence number for packets wraps
(b) after 2^(blocksize_in_bits/4) blocks
(see: draft-ietf-secsh-newmodes-00.txt)
(a) and (b) are _enabled_ by default, and only disabled for known
openssh versions, that don't support rekeying properly.
* client option 'RekeyLimit'
* do not reply to requests during rekeying
- markus@cvs.openbsd.org 2003/04/01 10:22:21
[clientloop.c monitor.c monitor_wrap.c packet.c packet.h readconf.c]
[readconf.h serverloop.c sshconnect2.c]
backout rekeying changes (for 3.6.1)
|
|
- markus@cvs.openbsd.org 2003/03/05 22:33:43
[channels.c monitor.c scp.c session.c sftp-client.c sftp-int.c]
[sftp-server.c ssh-add.c sshconnect2.c]
fix memory leaks; from dlheine@suif.Stanford.EDU/CLOUSEAU; ok djm@
|
