| Age | Commit message (Collapse) | Author |
|---|
|
Fix public key authentication when multiple
authentication is in use. Instead of deleting and re-preparing the entire
keys list, just reset the 'used' flags; the keys list is already in a good
order (with already- tried keys at the back)
Analysis and patch from Vincent Brillault on bz#2642; ok dtucker@
Upstream-ID: 7123f12dc2f3bcaae715853035a97923d7300176
|
|
restore pre-auth compression support in the client -- the
previous commit was intended to remove it from the server only.
remove a few server-side pre-auth compression bits that escaped
adjust wording of Compression directive in sshd_config(5)
pointed out by naddy@ ok markus@
Upstream-ID: d23696ed72a228dacd4839dd9f2dec424ba2016b
|
|
Remove support for pre-authentication compression. Doing
compression early in the protocol probably seemed reasonable in the 1990s,
but today it's clearly a bad idea in terms of both cryptography (cf. multiple
compression oracle attacks in TLS) and attack surface.
Moreover, to support it across privilege-separation zlib needed
the assistance of a complex shared-memory manager that made the
required attack surface considerably larger.
Prompted by Guido Vranken pointing out a compiler-elided security
check in the shared memory manager found by Stack
(http://css.csail.mit.edu/stack/); ok deraadt@ markus@
NB. pre-auth authentication has been disabled by default in sshd
for >10 years.
Upstream-ID: 32af9771788d45a0779693b41d06ec199d849caf
|
|
If ssh receives a PACKET_DISCONNECT during userauth it
will cause ssh_dispatch_run(DISPATCH_BLOCK, ...) to return without the
session being authenticated. Check for this and exit if necessary. ok djm@
Upstream-ID: b3afe126c0839d2eae6cddd41ff2ba317eda0903
|
|
Lower loglevel for "Authenticated with partial success"
message similar to other similar level. bz#2599, patch from cgallek at
gmail.com, ok markus@
Upstream-ID: 3faab814e947dc7b2e292edede23e94c608cb4dd
|
|
support UTF-8 characters in ssh(1) banners using
schwarze@'s safe fmprintf printer; bz#2058
feedback schwarze@ ok dtucker@
Upstream-ID: a72ce4e3644c957643c9524eea2959e41b91eea7
|
|
KNF compression proposal and simplify the client side a
little. ok djm@
Upstream-ID: aa814b694efe9e5af8a26e4c80a05526ae6d6605
|
|
prefer agent-hosted keys to keys from PKCS#11; ok markus
Upstream-ID: 7417f7653d58d6306d9f8c08d0263d050e2fd8f4
|
|
add support for additional fixed DH groups from
draft-ietf-curdle-ssh-kex-sha2-03
diffie-hellman-group14-sha256 (2K group)
diffie-hellman-group16-sha512 (4K group)
diffie-hellman-group18-sha512 (8K group)
based on patch from Mark D. Baushke and Darren Tucker
ok markus@
Upstream-ID: ac00406ada4f0dfec41585ca0839f039545bc46f
|
|
fix signed/unsigned errors reported by clang-3.7; add
sshbuf_dup_string() to replace a common idiom of strdup(sshbuf_ptr()) with
better safety checking; feedback and ok markus@
Upstream-ID: 71f926d9bb3f1efed51319a6daf37e93d57c8820
|
|
fix comment
Upstream-ID: 313a385bd7b69a82f8e28ecbaf5789c774457b15
|
|
unbreak authentication using lone certificate keys in
ssh-agent: when attempting pubkey auth with a certificate, if no separate
private key is found among the keys then try with the certificate key itself.
bz#2550 reported by Peter Moody
Upstream-ID: f939cd76d68e6a9a3d1711b5a943d6ed1e623966
|
|
fix spurious error message when incorrect passphrase
entered for keys; reported by espie@ ok deraadt@
Upstream-ID: 58b2e46e63ed6912ed1ee780bd3bd8560f9a5899
|
|
avoid an uninitialised value when NumberOfPasswordPrompts
is 0 ok markus@ djm@
Upstream-ID: 11b068d83c2865343aeb46acf1e9eec00f829b6b
|
|
fd leaks; report Qualys Security Advisory team; ok
deraadt@
Upstream-ID: 4ec0f12b9d8fa202293c9effa115464185aa071d
|
|
remove roaming support; ok djm@
Upstream-ID: 2cab8f4b197bc95776fb1c8dc2859dad0c64dc56
|
|
Remove NULL-checks before sshkey_free().
ok djm@
Upstream-ID: 3e35afe8a25e021216696b5d6cde7f5d2e5e3f52
|
|
correct error messages; from Tomas Kuthan bz#2507
Upstream-ID: 7454a0affeab772398052954c79300aa82077093
|
|
Pass (char *)NULL rather than (char *)0 to execl and
execlp.
ok dtucker@
Upstream-ID: 56c955106cbddba86c3dd9bbf786ac0d1b361492
|
|
Remove NULL-checks before free().
ok dtucker@
Upstream-ID: e3d3cb1ce900179906af36517b5eea0fb15e6ef8
|
|
implement SHA2-{256,512} for RSASSA-PKCS1-v1_5 signatures
(user and host auth) based on draft-rsa-dsa-sha2-256-03.txt and
draft-ssh-ext-info-04.txt; with & ok djm@
Upstream-ID: cf82ce532b2733e5c4b34bb7b7c94835632db309
|
|
clean up agent_fd handling; properly initialise it to -1
and make tests consistent
ok markus@
Upstream-ID: ac9554323d5065745caf17b5e37cb0f0d4825707
|
|
Add an AddKeysToAgent client option which can be set to
'yes', 'no', 'ask', or 'confirm', and defaults to 'no'. When enabled, a
private key that is used during authentication will be added to ssh-agent if
it is running (with confirmation enabled if set to 'confirm').
Initial version from Joachim Schipper many years ago.
ok markus@
Upstream-ID: a680db2248e8064ec55f8be72d539458c987d5f4
|
|
apply PubkeyAcceptedKeyTypes filtering earlier, so all
skipped keys are noted before pubkey authentication starts. ok dtucker@
Upstream-ID: ba4f52f54268a421a2a5f98bb375403f4cb044b8
|
|
add ssh_config CertificateFile option to explicitly list
a certificate; patch from Meghana Bhat on bz#2436; ok markus@
Upstream-ID: 58648ec53c510b41c1f46d8fe293aadc87229ab8
|
|
Allow ssh_config and sshd_config kex parameters options be
prefixed by a '+' to indicate that the specified items be appended to the
default rather than replacing it.
approach suggested by dtucker@, feedback dlg@, ok markus@
Upstream-ID: 0f901137298fc17095d5756ff1561a7028e8882a
|
|
Turn off DSA by default; add HostKeyAlgorithms to the
server and PubkeyAcceptedKeyTypes to the client side, so it still can be
tested or turned back on; feedback and ok djm@
Upstream-ID: 8450a9e6d83f80c9bfed864ff061dfc9323cec21
|
|
Remove pattern length argument from match_pattern_list(), we
only ever use it for strlen(pattern).
Prompted by hanno AT hboeck.de pointing an out-of-bound read
error caused by an incorrect pattern length found using AFL
and his own tools.
ok markus@
|
|
Ifdef out the ECC parts when building with an OpenSSL that doesn't have
it.
|
|
Add a ssh_config HostbasedKeyType option to control which
host public key types are tried during hostbased authentication.
This may be used to prevent too many keys being sent to the server,
and blowing past its MaxAuthTries limit.
bz#2211 based on patch by Iain Morgan; ok markus@
|
|
update to new API (key_fingerprint => sshkey_fingerprint)
check sshkey_fingerprint return values; ok markus
|
|
kex_setup errors are fatal()
|
|
make this compile with KERBEROS5 enabled
|
|
adapt kex to sshbuf and struct ssh; ok djm@
|
|
move dispatch to struct ssh; ok djm@
|
|
update packet.c & isolate, introduce struct ssh a) switch
packet.c to buffer api and isolate per-connection info into struct ssh b)
(de)serialization of the state is moved from monitor to packet.c c) the old
packet.c API is implemented in opacket.[ch] d) compress.c/h is removed and
integrated into packet.c with and ok djm@
|
|
avoid trailing ',' in host key algorithms
|
|
fix regression reported by brad@ for passworded keys without
agent present
|
|
move authfd.c and its tentacles to the new buffer/key
API; ok markus@
|
|
deprecate key_load_private_pem() and
sshkey_load_private_pem() interfaces. Refactor the generic key loading API to
not require pathnames to be specified (they weren't really used).
Fixes a few other things en passant:
Makes ed25519 keys work for hostbased authentication (ssh-keysign
previously used the PEM-only routines).
Fixes key comment regression bz#2306: key pathnames were being lost as
comment fields.
ok markus@
|
|
Add FingerprintHash option to control algorithm used for
key fingerprints. Default changes from MD5 to SHA256 and format from hex to
base64.
Feedback and ok naddy@ markus@
|
|
show in debug output which hostkeys are being tried when
attempting hostbased auth; patch from Iain Morgan
|
|
[PROTOCOL auth-options.c auth-passwd.c auth-rh-rsa.c auth-rhosts.c]
[auth-rsa.c auth.c auth1.c auth2-hostbased.c auth2-kbdint.c auth2-none.c]
[auth2-passwd.c auth2-pubkey.c auth2.c canohost.c channels.c channels.h]
[clientloop.c misc.c misc.h monitor.c mux.c packet.c readconf.c]
[readconf.h servconf.c servconf.h serverloop.c session.c ssh-agent.c]
[ssh.c ssh_config.5 sshconnect.c sshconnect1.c sshconnect2.c sshd.c]
[sshd_config.5 sshlogin.c]
Add support for Unix domain socket forwarding. A remote TCP port
may be forwarded to a local Unix domain socket and vice versa or
both ends may be a Unix domain socket. This is a reimplementation
of the streamlocal patches by William Ahern from:
http://www.25thandclement.com/~william/projects/streamlocal.html
OK djm@ markus@
|
|
[Makefile.in auth-bsdauth.c auth-chall.c auth-options.c auth-rsa.c
[auth2-none.c auth2-pubkey.c authfile.c authfile.h cipher-3des1.c
[cipher-chachapoly.c cipher-chachapoly.h cipher.c cipher.h
[digest-libc.c digest-openssl.c digest.h dns.c entropy.c hmac.h
[hostfile.c key.c key.h krl.c monitor.c packet.c rsa.c rsa.h
[ssh-add.c ssh-agent.c ssh-dss.c ssh-ecdsa.c ssh-ed25519.c
[ssh-keygen.c ssh-pkcs11-client.c ssh-pkcs11-helper.c ssh-pkcs11.c
[ssh-rsa.c sshbuf-misc.c sshbuf.h sshconnect.c sshconnect1.c
[sshconnect2.c sshd.c sshkey.c sshkey.h
[openbsd-compat/openssl-compat.c openbsd-compat/openssl-compat.h]
New key API: refactor key-related functions to be more library-like,
existing API is offered as a set of wrappers.
with and ok markus@
Thanks also to Ben Hawkes, David Tomaschik, Ivan Fratric, Matthew
Dempsky and Ron Bowes for a detailed review a few months ago.
NB. This commit also removes portable OpenSSH support for OpenSSL
<0.9.8e.
|
|
[sshconnect2.c]
fix inverted test that caused PKCS#11 keys that were explicitly listed
not to be preferred. Reported by Dirk-Willem van Gulik
|
|
[auth.c authfd.c authfile.c bufaux.c cipher.c cipher.h hostfile.c]
[kex.c key.c mac.c monitor.c monitor_wrap.c myproposal.h packet.c]
[roaming_client.c ssh-agent.c ssh-keygen.c ssh-keyscan.c ssh-keysign.c]
[ssh-pkcs11.h ssh.c sshconnect.c sshconnect2.c sshd.c]
make compiling against OpenSSL optional (make OPENSSL=no);
reduces algorithms to curve25519, aes-ctr, chacha, ed25519;
allows us to explore further options; with and ok djm
|
|
[compat.c compat.h sshconnect2.c sshd.c version.h]
OpenSSH 6.5 and 6.6 have a bug that causes ~0.2% of connections
using the curve25519-sha256@libssh.org KEX exchange method to fail
when connecting with something that implements the spec properly.
Disable this KEX method when speaking to one of the affected
versions.
reported by Aris Adamantiadis; ok markus@
|
|
repeatedly):
- markus@cvs.openbsd.org 2014/03/25 09:40:03
[myproposal.h]
trimm default proposals.
This commit removes the weaker pre-SHA2 hashes, the broken ciphers
(arcfour), and the broken modes (CBC) from the default configuration
(the patch only changes the default, all the modes are still available
for the config files).
ok djm@, reminded by tedu@ & naddy@ and discussed with many
- deraadt@cvs.openbsd.org 2014/03/26 17:16:26
[myproposal.h]
The current sharing of myproposal[] between both client and server code
makes the previous diff highly unpallatable. We want to go in that
direction for the server, but not for the client. Sigh.
Brought up by naddy.
- markus@cvs.openbsd.org 2014/03/27 23:01:27
[myproposal.h ssh-keyscan.c sshconnect2.c sshd.c]
disable weak proposals in sshd, but keep them in ssh; ok djm@
|
|
[auth1.c auth2-chall.c auth2-passwd.c authfile.c bufaux.c bufbn.c]
[buffer.c cipher-3des1.c cipher.c clientloop.c gss-serv.c kex.c]
[kexdhc.c kexdhs.c kexecdhc.c kexgexc.c kexecdhs.c kexgexs.c key.c]
[monitor.c monitor_wrap.c packet.c readpass.c rsa.c serverloop.c]
[ssh-add.c ssh-agent.c ssh-dss.c ssh-ecdsa.c ssh-ed25519.c]
[ssh-keygen.c ssh-rsa.c sshconnect.c sshconnect1.c sshconnect2.c]
[sshd.c]
convert memset of potentially-private data to explicit_bzero()
|
|
[auth2-chall.c authfd.c authfile.c bufaux.c bufec.c canohost.c]
[channels.c cipher-chachapoly.c clientloop.c configure.ac hostfile.c]
[kexc25519.c krl.c monitor.c sandbox-systrace.c session.c]
[sftp-client.c ssh-keygen.c ssh.c sshconnect2.c sshd.c sshlogin.c]
[openbsd-compat/explicit_bzero.c openbsd-compat/openbsd-compat.h]
replace most bzero with explicit_bzero, except a few that cna be memset
ok djm dtucker
|
